Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

1)

AIM-Create the layouts of the Kitchen and provide hatches pattern as shown and also use blocks and appropriate dimensions 

PROCEDURE 

• SELECT the line command 
• using line command create the kitchen layout as shown in fig
• select single line text from annotate and mention the text as shown
• select dimension  tool
• mention the dimension where as needed
• SELECT HATCH from the ribben tab and do the hatching
• create the block of outer wall
• select block command using command window 
• name the block 
• select pick up point , object and press ok
• using insert command block can be bring into the drawing

RESULT

2)

AIM- Create the elevation of the plan created in the Challenges 7 and apply proper hatch in the walls, doors,
windows, and other architectural elements.

REFERENCE- CHALLENGE 7 FLLOR PLAN

 

PROCEDURE-

1. Take the offset from the plan
2. SELECT the line command
3. draw the ELEVATION as per the dimension given
4. select the DIMENSION tool
5. give the dimension 
6. SELECT HATCH from the ribben tab and do the hatching
7. select the TEXT tool
8. alot the specified position to the text in the figure
9. trim the unwanted line

RESULT

3)

AIM-Create the section view of an industrial building as shown in Figure also Provide appropriate hatches , annotation and
dimensions wherever required. 

PROCEDURE 

• SELECT the line command 
• using line command create section view of an industrial building as shown in fig
• select single line text from annotate and mention the text as shown
• select dimension  tool
• mention the dimension where as needed
• SELECT HATCH from the ribben tab and do the hatching
• create the block for outer nomanclature
• select block command using command window 
• name the block 
• select pick up point , object and press ok
• using insert command block can be bring into the drawing

RESULT