Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

1st Answer:

AIM:Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.

PROCEDURE:

step-1:Ribbon>draw>line.

step-2:Ribbon>draw>rectangle.

step-3:ribbon>modify> copy.

step-4:ribbon>modify> move.

step-5:ribbon>modify> copy.

step-6:ribbon>annotations> text.

step-7:ribbon>annotations>dimensions.

step-8:ribbon>draw>hatch.

step-9:ribbon>modify>trim.

RESULT:

2nd Answer:

AIM: Create the elevation of the plan created in the Challenges 7 and apply proper hatch in the walls, doors, windows, and other architectural elements.

PROCEDURE:

step-1:Ribbon>draw>line.

step-2:Ribbon>draw>rectangle.

step-3:ribbon>modify> copy.

step-4:ribbon>modify> move.

step-5:ribbon>modify> copy.

step-6:ribbon>annotations> text.

step-7:ribbon>annotations>dimensions.

step-8:ribbon>draw>hatch.

step-9:ribbon>modify>trim.

RESULT:

3RD Answer:

AIM: Create the section view of an industrial building as shown in Figure. Provide appropriate hatches and dimensions wherever required. Also, provide annotations to the drawing.

PROCEDURE:

step-1:Ribbon>draw>line.

step-2:Ribbon>draw>rectangle.

step-3:ribbon>modify> copy.

step-4:ribbon>modify> move.

step-5:ribbon>modify> copy.

step-6:ribbon>annotations> text.

step-7:ribbon>annotations>dimensions.

step-8:ribbon>draw>hatch.

step-9:ribbon>modify>trim.

RESULT: