Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

Aim & introduction :- In this project my aim is to learn short cut keys of various commads, create sheets for various elements like walls, columns, doors, windows, furniture elements like bed, table, dinining table, sofa, chairs, plumbing fixtures like cammode,sink, bath tub, wash basin, shower, curtain wall quatity, staircase railing. we can take of materials of various material like walls, doors windows, painting. We can assign cost to the elements also. We can learn about dynamo to create flow chart for various scenarious. We can parameters associated with various model elements like wall, floor, door, window, table, building.

1) The short key for section box is Bx. Selet the element u want to do work in area type BX, the section box will created & u can edit it. First of select the element you want create similar & type CS & place it where you want to place. Zoom in the element line you want thick or thin it type Tl it if thin it will or otherwise if it is thick it will thin. Select the element you want to override pattern or colour & type Vg click on pattern change colour, click apply & ok. Open the floor you want to appear in the plan know its height, type VR & keep the floor level of top & bottom in of the floor plan & change the veiw depth height as per element want to appear in the plan, click apply & ok. Press Ctrl+< the element selcted previous will select. Type DI The annotatsate for distance will appear, select element from to end bring the cursor onthe distance lince it show the distance. Select the element you want to align with & type AL Select the line you want bring in & enter. Select the element you want rotate, type Ro & click on corner of element rotate in direction you want & give angle & enter. Select the element you want move to another location, type MV, click on the corner of element drag it in the direction you want move & give distance, enter. Select the element you want copy of it Type CO, click onthe element corner of element & bring the cursor to location you want have it & press enter. Type MM, Select the element you want mirror & click line at right or left hand side you want have it & press enter. Tpe AR select the element you want to array at top number of copies want & click on the corner of element drag in the direction you want & press enter.

2)Click on view, click on schedules scroll down to schedule/quantities, click on walls & click ok, a new dialog box will open walls, select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

3)Like wise do for floors, doors, windows & material concrete. 4) Click on view, click on schedules scroll down to schedule/quantities, click on rooms & click ok, a new dialog box will open click on area, count, name, number & volume click ok. , select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

4) In floor plan click on 9'' wall, click on edit scroll down to bottom you will see cost in that input cost of wall & click ok, in the same way dot it for 6'' wall also. Select each door in the plan click on edit scroll down to cost & type the amount you want give click on apply & o.k. do the same way for other door & give cost. Now click on view, click on schedules, scroll down to schedule quantitites, insert family & type, count cost, assembly code. Now by selectin assembly code give formula count*cost & give the name as total cost. Do the same way doors also.

5) a) Preparation of form work, Assemblying the formwork, placement of reinforcement, Checking of form work & steel, placing of concrete, comp[acting, curing, finish of job work. b) Check the pipe connection, check the water supply, check for any leaks, fix the problem. c) explain the project to the clent, provide time to client to decide, if he accepts to pay, continue with project, if he refuses to pay, decline the project.

6) a) Paramater for wall are:- i) construction - structure, wrapping at inserts, wrapping at ends, width, function. ii) graphics- coarse scale fill pattern, coarse scale fill colour. iii) material & finishes - structure material. iv) Analytical properties - absorptance, roughness. v) identity data - type, image, key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost. b) parameter for door are:- i)construction - function, wall closure, construction type. ii) material & finishes:- door, door frame, door face design, handle. iii) Dimensions:- height, width, rough width, rough height, thickness. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel. vi) other:- frame projection external, frame projection internal, frame width. c) floor:- i) Construction:- structure, thickness, function. ii) graphics:- coarse scale fill pattern, coarse scale fill colour. iii) material finishes:- structure material. iv) Analytical properties - absorptance, roughness. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. d) window:- i)construction - wall closure, construction type. ii) material & finishes:- window frame, panel, glass. iii) Dimensions:- height, width, rough width, rough height, first side open, mid left distance, mid right distance, second side open distance. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel width vi) other:- default sill height. e) table:- i) contraints:- default elevation. ii) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark.

Aim & introduction :- In this project my aim is to learn short cut keys of various commads, create sheets for various elements like walls, columns, doors, windows, furniture elements like bed, table, dinining table, sofa, chairs, plumbing fixtures like cammode,sink, bath tub, wash basin, shower, curtain wall quatity, staircase railing. we can take of materials of various material like walls, doors windows, painting. We can assign cost to the elements also. We can learn about dynamo to create flow chart for various scenarious. We can parameters associated with various model elements like wall, floor, door, window, table, building.

1) The short key for section box is Bx. Selet the element u want to do work in area type BX, the section box will created & u can edit it. First of select the element you want create similar & type CS & place it where you want to place. Zoom in the element line you want thick or thin it type Tl it if thin it will or otherwise if it is thick it will thin. Select the element you want to override pattern or colour & type Vg click on pattern change colour, click apply & ok. Open the floor you want to appear in the plan know its height, type VR & keep the floor level of top & bottom in of the floor plan & change the veiw depth height as per element want to appear in the plan, click apply & ok. Press Ctrl+< the element selcted previous will select. Type DI The annotatsate for distance will appear, select element from to end bring the cursor onthe distance lince it show the distance. Select the element you want to align with & type AL Select the line you want bring in & enter. Select the element you want rotate, type Ro & click on corner of element rotate in direction you want & give angle & enter. Select the element you want move to another location, type MV, click on the corner of element drag it in the direction you want move & give distance, enter. Select the element you want copy of it Type CO, click onthe element corner of element & bring the cursor to location you want have it & press enter. Type MM, Select the element you want mirror & click line at right or left hand side you want have it & press enter. Tpe AR select the element you want to array at top number of copies want & click on the corner of element drag in the direction you want & press enter.

2)Click on view, click on schedules scroll down to schedule/quantities, click on walls & click ok, a new dialog box will open walls, select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

3)Like wise do for floors, doors, windows & material concrete. 4) Click on view, click on schedules scroll down to schedule/quantities, click on rooms & click ok, a new dialog box will open click on area, count, name, number & volume click ok. , select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

4) In floor plan click on 9'' wall, click on edit scroll down to bottom you will see cost in that input cost of wall & click ok, in the same way dot it for 6'' wall also. Select each door in the plan click on edit scroll down to cost & type the amount you want give click on apply & o.k. do the same way for other door & give cost. Now click on view, click on schedules, scroll down to schedule quantitites, insert family & type, count cost, assembly code. Now by selectin assembly code give formula count*cost & give the name as total cost. Do the same way doors also.

5) a) Preparation of form work, Assemblying the formwork, placement of reinforcement, Checking of form work & steel, placing of concrete, comp[acting, curing, finish of job work. b) Check the pipe connection, check the water supply, check for any leaks, fix the problem. c) explain the project to the clent, provide time to client to decide, if he accepts to pay, continue with project, if he refuses to pay, decline the project.

6) a) Paramater for wall are:- i) construction - structure, wrapping at inserts, wrapping at ends, width, function. ii) graphics- coarse scale fill pattern, coarse scale fill colour. iii) material & finishes - structure material. iv) Analytical properties - absorptance, roughness. v) identity data - type, image, key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost. b) parameter for door are:- i)construction - function, wall closure, construction type. ii) material & finishes:- door, door frame, door face design, handle. iii) Dimensions:- height, width, rough width, rough height, thickness. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel. vi) other:- frame projection external, frame projection internal, frame width. c) floor:- i) Construction:- structure, thickness, function. ii) graphics:- coarse scale fill pattern, coarse scale fill colour. iii) material finishes:- structure material. iv) Analytical properties - absorptance, roughness. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. d) window:- i)construction - wall closure, construction type. ii) material & finishes:- window frame, panel, glass. iii) Dimensions:- height, width, rough width, rough height, first side open, mid left distance, mid right distance, second side open distance. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel width vi) other:- default sill height. e) table:- i) contraints:- default elevation. ii) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark.

Aim & introduction :- In this project my aim is to learn short cut keys of various commads, create sheets for various elements like walls, columns, doors, windows, furniture elements like bed, table, dinining table, sofa, chairs, plumbing fixtures like cammode,sink, bath tub, wash basin, shower, curtain wall quatity, staircase railing. we can take of materials of various material like walls, doors windows, painting. We can assign cost to the elements also. We can learn about dynamo to create flow chart for various scenarious. We can parameters associated with various model elements like wall, floor, door, window, table, building.

1) The short key for section box is Bx. Selet the element u want to do work in area type BX, the section box will created & u can edit it. First of select the element you want create similar & type CS & place it where you want to place. Zoom in the element line you want thick or thin it type Tl it if thin it will or otherwise if it is thick it will thin. Select the element you want to override pattern or colour & type Vg click on pattern change colour, click apply & ok. Open the floor you want to appear in the plan know its height, type VR & keep the floor level of top & bottom in of the floor plan & change the veiw depth height as per element want to appear in the plan, click apply & ok. Press Ctrl+< the element selcted previous will select. Type DI The annotatsate for distance will appear, select element from to end bring the cursor onthe distance lince it show the distance. Select the element you want to align with & type AL Select the line you want bring in & enter. Select the element you want rotate, type Ro & click on corner of element rotate in direction you want & give angle & enter. Select the element you want move to another location, type MV, click on the corner of element drag it in the direction you want move & give distance, enter. Select the element you want copy of it Type CO, click onthe element corner of element & bring the cursor to location you want have it & press enter. Type MM, Select the element you want mirror & click line at right or left hand side you want have it & press enter. Tpe AR select the element you want to array at top number of copies want & click on the corner of element drag in the direction you want & press enter.

2)Click on view, click on schedules scroll down to schedule/quantities, click on walls & click ok, a new dialog box will open walls, select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

3)Like wise do for floors, doors, windows & material concrete. 4) Click on view, click on schedules scroll down to schedule/quantities, click on rooms & click ok, a new dialog box will open click on area, count, name, number & volume click ok. , select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

4) In floor plan click on 9'' wall, click on edit scroll down to bottom you will see cost in that input cost of wall & click ok, in the same way dot it for 6'' wall also. Select each door in the plan click on edit scroll down to cost & type the amount you want give click on apply & o.k. do the same way for other door & give cost. Now click on view, click on schedules, scroll down to schedule quantitites, insert family & type, count cost, assembly code. Now by selectin assembly code give formula count*cost & give the name as total cost. Do the same way doors also.

5) a) Preparation of form work, Assemblying the formwork, placement of reinforcement, Checking of form work & steel, placing of concrete, comp[acting, curing, finish of job work. b) Check the pipe connection, check the water supply, check for any leaks, fix the problem. c) explain the project to the clent, provide time to client to decide, if he accepts to pay, continue with project, if he refuses to pay, decline the project.

6) a) Paramater for wall are:- i) construction - structure, wrapping at inserts, wrapping at ends, width, function. ii) graphics- coarse scale fill pattern, coarse scale fill colour. iii) material & finishes - structure material. iv) Analytical properties - absorptance, roughness. v) identity data - type, image, key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost. b) parameter for door are:- i)construction - function, wall closure, construction type. ii) material & finishes:- door, door frame, door face design, handle. iii) Dimensions:- height, width, rough width, rough height, thickness. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel. vi) other:- frame projection external, frame projection internal, frame width. c) floor:- i) Construction:- structure, thickness, function. ii) graphics:- coarse scale fill pattern, coarse scale fill colour. iii) material finishes:- structure material. iv) Analytical properties - absorptance, roughness. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. d) window:- i)construction - wall closure, construction type. ii) material & finishes:- window frame, panel, glass. iii) Dimensions:- height, width, rough width, rough height, first side open, mid left distance, mid right distance, second side open distance. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel width vi) other:- default sill height. e) table:- i) contraints:- default elevation. ii) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark.

Aim & introduction :- In this project my aim is to learn short cut keys of various commads, create sheets for various elements like walls, columns, doors, windows, furniture elements like bed, table, dinining table, sofa, chairs, plumbing fixtures like cammode,sink, bath tub, wash basin, shower, curtain wall quatity, staircase railing. we can take of materials of various material like walls, doors windows, painting. We can assign cost to the elements also. We can learn about dynamo to create flow chart for various scenarious. We can parameters associated with various model elements like wall, floor, door, window, table, building.

1) The short key for section box is Bx. Selet the element u want to do work in area type BX, the section box will created & u can edit it. First of select the element you want create similar & type CS & place it where you want to place. Zoom in the element line you want thick or thin it type Tl it if thin it will or otherwise if it is thick it will thin. Select the element you want to override pattern or colour & type Vg click on pattern change colour, click apply & ok. Open the floor you want to appear in the plan know its height, type VR & keep the floor level of top & bottom in of the floor plan & change the veiw depth height as per element want to appear in the plan, click apply & ok. Press Ctrl+< the element selcted previous will select. Type DI The annotatsate for distance will appear, select element from to end bring the cursor onthe distance lince it show the distance. Select the element you want to align with & type AL Select the line you want bring in & enter. Select the element you want rotate, type Ro & click on corner of element rotate in direction you want & give angle & enter. Select the element you want move to another location, type MV, click on the corner of element drag it in the direction you want move & give distance, enter. Select the element you want copy of it Type CO, click onthe element corner of element & bring the cursor to location you want have it & press enter. Type MM, Select the element you want mirror & click line at right or left hand side you want have it & press enter. Tpe AR select the element you want to array at top number of copies want & click on the corner of element drag in the direction you want & press enter.

2)Click on view, click on schedules scroll down to schedule/quantities, click on walls & click ok, a new dialog box will open walls, select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

3)Like wise do for floors, doors, windows & material concrete. 4) Click on view, click on schedules scroll down to schedule/quantities, click on rooms & click ok, a new dialog box will open click on area, count, name, number & volume click ok. , select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

4) In floor plan click on 9'' wall, click on edit scroll down to bottom you will see cost in that input cost of wall & click ok, in the same way dot it for 6'' wall also. Select each door in the plan click on edit scroll down to cost & type the amount you want give click on apply & o.k. do the same way for other door & give cost. Now click on view, click on schedules, scroll down to schedule quantitites, insert family & type, count cost, assembly code. Now by selectin assembly code give formula count*cost & give the name as total cost. Do the same way doors also.

5) a) Preparation of form work, Assemblying the formwork, placement of reinforcement, Checking of form work & steel, placing of concrete, comp[acting, curing, finish of job work. b) Check the pipe connection, check the water supply, check for any leaks, fix the problem. c) explain the project to the clent, provide time to client to decide, if he accepts to pay, continue with project, if he refuses to pay, decline the project.

6) a) Paramater for wall are:- i) construction - structure, wrapping at inserts, wrapping at ends, width, function. ii) graphics- coarse scale fill pattern, coarse scale fill colour. iii) material & finishes - structure material. iv) Analytical properties - absorptance, roughness. v) identity data - type, image, key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost. b) parameter for door are:- i)construction - function, wall closure, construction type. ii) material & finishes:- door, door frame, door face design, handle. iii) Dimensions:- height, width, rough width, rough height, thickness. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel. vi) other:- frame projection external, frame projection internal, frame width. c) floor:- i) Construction:- structure, thickness, function. ii) graphics:- coarse scale fill pattern, coarse scale fill colour. iii) material finishes:- structure material. iv) Analytical properties - absorptance, roughness. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. d) window:- i)construction - wall closure, construction type. ii) material & finishes:- window frame, panel, glass. iii) Dimensions:- height, width, rough width, rough height, first side open, mid left distance, mid right distance, second side open distance. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel width vi) other:- default sill height. e) table:- i) contraints:- default elevation. ii) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark.

Aim & introduction :- In this project my aim is to learn short cut keys of various commads, create sheets for various elements like walls, columns, doors, windows, furniture elements like bed, table, dinining table, sofa, chairs, plumbing fixtures like cammode,sink, bath tub, wash basin, shower, curtain wall quatity, staircase railing. we can take of materials of various material like walls, doors windows, painting. We can assign cost to the elements also. We can learn about dynamo to create flow chart for various scenarious. We can parameters associated with various model elements like wall, floor, door, window, table, building.

1) The short key for section box is Bx. Selet the element u want to do work in area type BX, the section box will created & u can edit it. First of select the element you want create similar & type CS & place it where you want to place. Zoom in the element line you want thick or thin it type Tl it if thin it will or otherwise if it is thick it will thin. Select the element you want to override pattern or colour & type Vg click on pattern change colour, click apply & ok. Open the floor you want to appear in the plan know its height, type VR & keep the floor level of top & bottom in of the floor plan & change the veiw depth height as per element want to appear in the plan, click apply & ok. Press Ctrl+< the element selcted previous will select. Type DI The annotatsate for distance will appear, select element from to end bring the cursor onthe distance lince it show the distance. Select the element you want to align with & type AL Select the line you want bring in & enter. Select the element you want rotate, type Ro & click on corner of element rotate in direction you want & give angle & enter. Select the element you want move to another location, type MV, click on the corner of element drag it in the direction you want move & give distance, enter. Select the element you want copy of it Type CO, click onthe element corner of element & bring the cursor to location you want have it & press enter. Type MM, Select the element you want mirror & click line at right or left hand side you want have it & press enter. Tpe AR select the element you want to array at top number of copies want & click on the corner of element drag in the direction you want & press enter.

2)Click on view, click on schedules scroll down to schedule/quantities, click on walls & click ok, a new dialog box will open walls, select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

3)Like wise do for floors, doors, windows & material concrete. 4) Click on view, click on schedules scroll down to schedule/quantities, click on rooms & click ok, a new dialog box will open click on area, count, name, number & volume click ok. , select the feilds you wantlike description, family type, count, length, width, area, volume etc. & click ok, the sheet will be ready.

4) In floor plan click on 9'' wall, click on edit scroll down to bottom you will see cost in that input cost of wall & click ok, in the same way dot it for 6'' wall also. Select each door in the plan click on edit scroll down to cost & type the amount you want give click on apply & o.k. do the same way for other door & give cost. Now click on view, click on schedules, scroll down to schedule quantitites, insert family & type, count cost, assembly code. Now by selectin assembly code give formula count*cost & give the name as total cost. Do the same way doors also.

5) a) Preparation of form work, Assemblying the formwork, placement of reinforcement, Checking of form work & steel, placing of concrete, comp[acting, curing, finish of job work. b) Check the pipe connection, check the water supply, check for any leaks, fix the problem. c) explain the project to the clent, provide time to client to decide, if he accepts to pay, continue with project, if he refuses to pay, decline the project.

6) a) Paramater for wall are:- i) construction - structure, wrapping at inserts, wrapping at ends, width, function. ii) graphics- coarse scale fill pattern, coarse scale fill colour. iii) material & finishes - structure material. iv) Analytical properties - absorptance, roughness. v) identity data - type, image, key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost. b) parameter for door are:- i)construction - function, wall closure, construction type. ii) material & finishes:- door, door frame, door face design, handle. iii) Dimensions:- height, width, rough width, rough height, thickness. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel. vi) other:- frame projection external, frame projection internal, frame width. c) floor:- i) Construction:- structure, thickness, function. ii) graphics:- coarse scale fill pattern, coarse scale fill colour. iii) material finishes:- structure material. iv) Analytical properties - absorptance, roughness. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. d) window:- i)construction - wall closure, construction type. ii) material & finishes:- window frame, panel, glass. iii) Dimensions:- height, width, rough width, rough height, first side open, mid left distance, mid right distance, second side open distance. iv) Analytical properties:- Analytical construction, define thermal properties by. v) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark. vi) data:- panel width vi) other:- default sill height. e) table:- i) contraints:- default elevation. ii) identity data:-key note, model, manufacturer, type comments, url, description, assembly code, type mark, fire rating, cost, type mark.