Challenge

Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

AIM:TO CREATE THE TEMPLATE AS GIVEN ABOVE..

INTRODUCTION : THE GIVEN TEMPLATE CONTAINS DESCRIPTION OF DRAWING,NAME OF THE CLIENT,ARCHITECT,SITE,TITLE ETC.

PROCEDURE:

GO TO START MENU,SELECT INSTALLED AUTO CAD VERSION LIKE 2023.
CLICK ON START DRAWING.
GO TO CREATE NEW DRAWING.
THEN NEW TAB WILL OPEN AND IT SHOWS FOUR ICONS.
USE THE DEFAULT METRIC SETTINGS
OPEN THE TEMPLATE AS ACAD.DWT
THEN NEW DRAWING TEMPLATE IS CREATED AND SET THE LIMITS AND PRESS ENTER.
THEN WRITE ZOOMIN IN COMMAND TAB AND PRESS ENTER,TEMPLATE IS CREATED .
USING UNITS IN COMMAND TAB,SELECT THE UNITS YOU ARE GOING TO DRAFT.
WRITE LINE IN COMMAND TAB AND PRESS ENTER.
CREATE TABLE WHICH HAVING 13 ROWS USING OFFSET COMMAND OF DIFFERENT DISTANCES.
WRITE THE GIVEN TEST USING TEST COMMAND AND USING LAYERS COMMAND SELECTING APPROPRIATE PROPERTIES THE TABLE IS CREATED.

RESULT:BY FOLLOWING ABOVE PROCEDURE THE ABOVE CONTENT IS FORMED.

AIM:TO CREATE THE TEMPLATE AS GIVEN ABOVE..

INTRODUCTION : THE GIVEN TEMPLATE CONTAINS DESCRIPTION OF DRAWING,NAME OF THE CLIENT,ARCHITECT,SITE,TITLE ETC.

PROCEDURE:

GO TO START MENU,SELECT INSTALLED AUTO CAD VERSION LIKE 2023.
CLICK ON START DRAWING.
GO TO CREATE NEW DRAWING.
THEN NEW TAB WILL OPEN AND IT SHOWS FOUR ICONS.
USE THE DEFAULT METRIC SETTINGS
OPEN THE TEMPLATE AS ACAD.DWT
THEN NEW DRAWING TEMPLATE IS CREATED AND SET THE LIMITS AND PRESS ENTER.
THEN WRITE ZOOMIN IN COMMAND TAB AND PRESS ENTER,TEMPLATE IS CREATED .
USING UNITS IN COMMAND TAB,SELECT THE UNITS YOU ARE GOING TO DRAFT.
WRITE LINE IN COMMAND TAB AND PRESS ENTER.
CREATE TABLE WHICH HAVING CERTAIN ROWS USING OFFSET COMMAND OF DIFFERENT DISTANCES.
WRITE THE GIVEN TEST USING TEST COMMAND AND USING LAYERS COMMAND SELECTING APPROPRIATE PROPERTIES THE TABLE IS CREATED.

RESULT:BY FOLLOWING ABOVE PROCEDURE THE ABOVE CONTENT IS FORMED.

Ship work like this
in your own course.