BlogFor BusinessTalk to a counsellor
CoursesIIT ProgramsPlacementsLog in
BlogFor Business
Talk to a counsellor
Challenge

Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

DDevender Ramavath5 Aug 2021

AIM : Draw the elevation and details of a wardrobe

INTRODUCTION : Line command , offcet command , Trim command , Hatch command , Dimension linear command , Dimcont command , circle command , DTest command , Layer command

PROCEDURE:


Command: OFFSET
Specify offset distance : 300

Command: OFFSET
Specify offset distance : 3880

Command: OFFSET
Specify offset distance :3880

Command: OFFSET
Specify offset distance : 300

Command: OFFSET
Specify offset distance : 1750

Command: OFFSET
Specify offset distance : 150

Command: OFFSET
Select object to offset : 3830

Command: OFFSET
Specify offset distance :150

Command: OFFSET
Specify offset distance : 1900

Command: OFFSET
Specify offset distance : 300

Command: O OFFSET
Specify offset distance : 300

Command: OFFSET
Specify offset distance : 9710

Command: OFFSET
Specify offset distance : 300

Command: OFFSET
Specify offset distance : 1650

Command: OFFSET
Specify offset distance : 150

Command: OFFSET
Specify offset distance : 4350

Command: OFFSET
Specify offset distance or : 450

Command: TR TRIM
Select cutting edges

Command: M TEXT
Type the reaquired text in the Required room

Command: Copy
Copy the text command in the required space and

Command: Text edit
Specify the room name and edit also type the room dimensons .

AIM : Draw the elevation and details of a wardrobe

INTRODUCTION : Line command , offcet command , Trim command , Hatch command , Dimension linear command , Dimcont command , circle command , DTest command , Layer command

PROCEDURE:

ujjj

Command: LINE
Specify first point:
Specify next point :2435
Specify next point :375
Specify next point :630
Specify next point :close

Command: LINE
Specify first point: on the mid point of the line 2435

Command: offcet
Specify offcet distance 100

Command: Arc
Specify arc distance with 2 point

Command: Copy
Specify the copy point and with number of copy 1


Command: L LINE
Specify first point:
Specify next point:2435
Specify next point:2700
Specify next point: 2435
Specify next point : c close

Command: O OFFSET
Specify offset distance : 100

Command: OFFSET
Specify offset distance : 2100

Command: OFFSET
Specify offset distance : 488

Command: OFFSET
Specify offset distance : 12

Command: TR TRIM
Current settings:


Command: O OFFSET
Select object to offset : 100

Command: OFFSET
Select object to offset : 680

Command: OFFSET
Specify offset distance : 680

Command: OFFSET
Select object to offset : 20

Command: OFFSET

Select object to offset : 300


Command: OFFSET
Select object to offset : 20

Command: OFFSET
Specify offset distance : 300

Command: OFFSET
Specify offset distance: 20

Command: OFFSET
Specify offset distance: 300

Command: OFFSET
Specify offset distance : 20

Command: OFFSET
Specify offset distance : 300

Command: OFFSET
Specify offset distance: 20


Command: O OFFSET
Specify offset distance : 508

Command:
Command: DLI DIMLINEAR

Command: L LINE
Specify first point:
Specify next point : 2600


Command: O OFFSET
Specify offset distance : 20

Command: OFFSET
Specify offset distance : 630

Command: OFFSET
Specify offset distance : 20

Command: L LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:


Command: O OFFSET
Specify offset distance : 100

Command: OFFSET
Specify offset distance: 900

Command: OFFSET
Specify offset distance : 1180

Command: OFFSET
Specify offset distance : 520
Specify offset distance : 900

Command: OFFSET
Specify offset distance : 1180

Command: OFFSET
Specify offset distance: 520

AIM : Creating the Kitchen Layout as shown in the Figure below

INTRODUCTION : Line command , offcet command , Trim command , Hatch command , Dimension linear command , Dimcont command , circle command , DTest command , Layer command

PROCEDURE:

Command: L LINE
Specify first point:
Specify next point :
Specify next point :

Command: O OFFSET
Specify offset distance :300

Command: OFFSET
Specify offset distance : 4300

Command: OFFSET
Specify offset distance : 3200

Command: OFFSET
Specify offset distance : 3000

Command: O OFFSET
Specify offset distance : 300

Command: O OFFSET
Specify offset distance : 1000

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 600

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 450

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 300

Command: O OFFSET
Specify offset distance : 900

Command: O OFFSET
Specify offset distance : 945

Command: O OFFSET
Specify offset distance :35

Command: O OFFSET
Specify offset distance : 900

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 450

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 450

Command: O OFFSET
Specify offset distance : 900

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 450

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 450

Command: O OFFSET
Specify offset distance : 560

Command: O OFFSET
Specify offset distance : 35

Command: tr TRIM
Current settings:

Command: L LINE
Specify first point:
Specify next point :
Specify next point :

Command: O OFFSET
Specify offset distance :300

Command: OFFSET
Specify offset distance : 450

Command: OFFSET
Specify offset distance : 12

Command: OFFSET
Specify offset distance : 900

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 900

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance :900

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 1010

Command: O OFFSET
Specify offset distance : 35

Command: O OFFSET
Specify offset distance : 300

Command: O OFFSET
Specify offset distance : 965

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 600

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 865

Command: O OFFSET
Specify offset distance : 12

Command: O OFFSET
Specify offset distance : 865

Command: O OFFSET
Specify offset distance : 35

Command : H Hatch
Hatch the required space

Command : M text
Specify the text for the command

Command : ARC
Command : DLI
measure all the required dimenions in the drawing

AIM : Drawing the Raft Layout as shown in the Figur and also Assuming the column size

INTRODUCTION : Line command , offcet command , Trim command , Hatch command , Dimension linear command , Dimcont command , circle command , DTest command , Layer command

PROCEDURE :

Command: XL
Command: XLINE
Specify a point : v
Specify through point:
Specify through point:

Command : Offcet
Specify the offcet distance : 5'9"
Specify the offcet distance : 2'
Specify the offcet distance : 7'
Specify the offcet distance : 4'
Specify the offcet distance : 4'6"
Specify the offcet distance : 5'7.5"

Command: XL
Command: XLINE
Specify a point : H
Specify through point:
Specify through point:

Command : Offcet
Specify the offcet distance : 5'7.5"
Specify the offcet distance : 3'7.5"
Specify the offcet distance : 4'9"
Specify the offcet distance : 5'10.5"
Specify the offcet distance : 5'7.5"
Specify the offcet distance : 3'9"
Specify the offcet distance : 5'9"
Specify the offcet distance : 13'10.5"
Specify the offcet distance : 10'4.5"

Command : Rec
Specify the rectangle distance : 9", 24"

AIM : Sketch the column details as shown in Figure and Inserting dimensions and text

Introduction: Line command , offcet command , Trim command , Hatch command , Dimension linear command , Dimcont command , circle command , DTest command , Layer command

procedure:

Command : L
Specify the first point of line :
Specify the next point of line : 24"

Command : Offcet
Specify the offcet distance : 6"
Specify the offcet distance : 6"
Specify the offcet distance : 6"
Specify the offcet distance : 6"

Command : L
Specify the first point of line :
Specify the next point of line : 24"

Command : Offcet
Specify the offcet distance : 6"
Specify the offcet distance : 6"
Specify the offcet distance : 6"
Specify the offcet distance : 6"

Command : REC
Command : M text
Command : copy
Copy the number of copy item as 3

Your portfolio, next

Ship work like this
in your own course.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.