Challenge 5 : Concept Modeling of Car Bumper
- CHALLENGE . 05 – CONCEPT MODELLING OF A CAR BUMPER 2) OBJECTIVE:- IN THIS EXERCISE I LEARN HOW TO APPLY A SURFACES ON THE CURVES NETWORK OF AN CAR BUMPER OBJECT/MODEL BY USING DIFFERENT SURFACING TOOLS AND ACHIEVE A 3D SHAPE OF THE GIVEN OBJECT.AS WELL I LEARN HOW TO MAKE IT IN CLASS-A BY APPLYING VARIOUS PROPERTIES OF SURFACING TOOLS. 3)INTRODUCTION:-IN THIS EXERCISE I KNEW THE SURFACING TOOLS IN A DEEP WAY AND HOW TO APPLY IT ON THE CURVES OF A CAR BUMPER MODEL FOR ACHIEVE THE 3D SHAPE OF THE CAR BUMPER TO THE FRONT SIDE AND REAR SIDE BUMPER OF THE CAR. 4) DESIGN METHODOLOGY :- 1) FIRSTLY I USING A DIMENSION BOX TOOL AND SETTING THE CANVAS IMAGES IN WORKSPACE AND GIVING ITS PROPER VALUE. 2) THEN IMPORT A IMAGE OF A CAR BUMPER MODEL BY USING CANVAS IMAGE TOOL AND ASSIGN IT PROPERLY IN THE WORKSPACE.AND I APPLYING A CONSTRUCTION PLANE EDITOR TOOL FOR THE BETTER VISUALISATION OF IMAGE OF THE MODEL.3) AFTER THAT I TAKING THE HYPERTHERTICAL CURVES AND ALIGHNING IT WITH THE IMAGES AND THEN I STARTING MY CURVE NETWORK FROM THE WHEEL ARC SIDE. 4)AFTER THAT I STARTING THE CURVE NETWORK AND MATCHES IT WITH THE IMAGE FOR THE SURFACING AND MANIPULATING THE CURVES AND MATCH IT WITH THE GIVEN OBJECT.5)THEN TAKING FROM THE FRONT SIDE CURVES AND MATCHING IT WITH THE SIDE VIEW 6)THEN I TAKING THE CURVES ON THE ALLSIDE OF A CAR BUMPER BY MANIPULATING IT AND SURFACING IT BY MANIPULATING THE CURVES IN A PROPER FORM FOR THE SURFACING.7)INTERNAL SIDE OF THE BUMPER IS COMPLETED BY TRIMMIMG AND INTERSECTING THE SURFACES BY USING THE TOOLS. AFTER THAT I COMPLETE A ONE SIDE AND FRONT PORTION OF THE CAR BUMPER.8) BY APPLYING PROPER CURVES AND SURFACES BY USING VARIOUS SURFACING TOOLS AND I ACHIEVED THE FRONT SIDE OF A CAR BUMPER AS WELL AS BACK SIDE OF THE CAR BUMPER AND I ACHIEVED A COMPLETE CAR BUMPER AND I COMPLETED THE OBJECT BY GIVING MULCOL AND USTEX DIAGNISTIC SHADES. 5) DESCRIPTION:- THE TOOLS WHICH I USED FOR TO COMPLETE THE SURFACING THAT ARE AS FOLLOW :- FOR THE BASIC CURVE NETWORK I USE :- 1)CURVE TOOL 2)CIRCLE TOOL 3)KEYPTBOX TOOL FOR THE EDITING OF THE CURVES I USE:- 4)BLEND TOOL 5) ATTCH TOOL 6)EXTEND TOOL 7) ALIGN TOOL FOR THE SURFACING I USE :- 8)PLANER9) SKIN RAIL 10)M-RAIL SURFACE TOOL 11)SQUARE TOOL FOR THE SURFACE EDITING I USE :- 12) SURFACE FILLET CONTROL13) FREE FORM BLEND 14)MULTISURFACE DRAFT CONTROL 15) PROJECTAND TRIM TOOL AS I MENTIOMED ABOVE I USED SAME PROCEDURE TO COMPLETE THE FRONT AND REAR SIDE OF THE CAR BUMPER BY BUILDING THE CURVE NETWORK AD MANIPULATING THE CURVES FOR THE SURFACING
- . 1) FIRSTLY I USING A DIMENSION BOX TOOL AND SETTING THE CANVAS IMAGES IN WORKSPACE AND GIVING ITS PROPER VALUE.
2) THEN IMPORT A IMAGE OF A CAR BUMPER MODEL BY USING CANVAS IMAGE TOOL AND ASSIGN IT PROPERLY IN THE WORKSPACE.AND I APPLYING A CONSTRUCTION PLANE EDITOR TOOL FOR THE BETTER VISUALISATION OF IMAGE OF THE MODEL 3)AFTER THAT I TAKING THE HYPERTHERTICAL CURVES AND ALIGHNING IT WITH THE IMAGES AND THEN I STARTING MY CURVE NETWORK FROM THE WHEEL ARC SIDE.
4)AFTER THAT I STARTING THE CURVE NETWORK AND MATCHES IT WITH THE IMAGE FOR THE SURFACING AND MANIPULATING THE CURVES AND MATCH IT WITH THE GIVEN OBJECT. 
5)THEN TAKING FROM THE FRONT SIDE CURVES AND MATCHING IT WITH THE SIDE VIEW 6)THEN I TAKING THE CURVES ON SURFACING IT BY MANIPULATING THE CURVES IN A PROPER FORM FOR THE SURFACING.
7)INTERNAL SIDE OF THE BOLT. AFTER THAT I COMPLETE A ONE SIDE AND FRONT PORTION OF THE CAR BUMPER.8) BY APPLYING PROPER CURVES AND SURFACES BY USING VARIOUS SURFACING TOOLS I ACHIEVED THE FRONT SIDE OF A CAR BUMPER AS WELL AS BACK SIDE OF THE CAR BUMPER AND I ACHIEVED A COMPLETE CAR BUMPER AND I COMPLETED THE OBJECT BY GIVING MULCOL AND USTEX DIAGNISTIC 6)SCREENSHOTS OF THE MODEL:- 
7)CONCLUSION:- THE CURVES WHERE THE SURFCING IS NOT PROPERLY WORKING I TRYING TO COMPLETE THE CURVE MANIPULATION FOR ACHIEVING THE SURFACE ON THE SPECIFIC OBJECT. BY USING THIS SURFACING TOOLS 1)BLEND TOOL 2) ATTCH TOOL 3)EXTEND TOOL 4) ALIGN TOOL BY USING ALL THE TOOLS THAT I MENTIONED ABOVE I COMPLETE THE MODELLING OF AN CAR BUMPER AND KNEW HOW TO ACHIEVED A CLASS A SURFACING OF AN SPECIFIC OBJECT OR MODEL. I REPRESENT THE MODEL OF A CAR BUMPER