Advanced Sheet Metal Design Using NX Cad Challenge_7_ Metal bracket-II

CREATING METAL BRACKET FROM THE 2D DRAWING USING NX

Objective: Main objective of this project is to create metal bracket from the 2D drawing using NX.

Design Methodology:

FEATURES DISCRIPTION:

NORMAL CUTOUT:

CUTS THE MODEL PERPENDICULAR TO THE SKETCH

ADVANCE FLANGE:

Adds flange along an edge using a bend angle or a reference face the edge and reference can be curved.

BREAK CORNER:

Rounds a sharp corner.

COUNTER FLANGE:

Creates a base feature by extruding a sketch along a vector, or adds material by sweeping a sketch along an edge or chain of edges.

GUSSET:

Creates a stiffening gusset on the part. Rounded gusset and Square gusset are two types.

HOLE:

Hole feature creates hole on sheet.

UNBEND:

Flattens a bend.

REBEND:

Restores a bend

FLAT PATTERN:

Creates flat pattern feature from the formed sheet metal part.

CONCLUSION:

Creates "METAL BRACKET" from 2D deawing using NX.

I would like to thanks to my mentor Mr. NIRMAL sir for constant support and guidance which was of great help to complete project successfully.