Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket

                                              NX SHEET METAL BRACKET DESIGN

                                                                                          

                                                                                            DESIGNED BY

                                                                                        ASHIS TARAI

Objective:-

The objective of this project is to design a sheet metal bracket in Siemens NX sheet metal workbench.

Introduction:-

A bracket is any intermediate component for fixing one part to another, usually large part. What makes a bracket is that it is intermediate between the two and fixes the one to the other. Brackets are very widely in shape, but a prototypical bracket is the L shaped.

Description:-

Tools Or feature used in this model are described below.

1. Sketch:-It is the 2d representation of the model respect to plane / view.

2. Contour Flange:-It is used to create base feature or secondary feature of a sheet metal part by extruding a sketch created along a particular vector.

3. Normal Cutout:-With this tool we can remove some portion of the sheet metal by creating or projecting on the particular face of the part. It cuts the model perpendicular to the sketch.

4. Break Corner:- It is used to create fillet or chamfer for sharp edges of the sheet metal part.

5. Unbend:-Used to flatten the sheet metal part in order to create the some complex feature on sheet metal part which Are not possible to create in its original position.

6. Bead:-It used to create emboss over the sheet metal part from open loop/close loop sketch created over that particular face /plane in order to increase strength locally.

7. Re bend:-It used in order to get back its original position. Restore an unbend feature to its previous bend states along with any feature added after the unbend feature.

8. Hole:-Hole can be created on sheet metal part by specify point as the face the part using sketch tool.

9. Flat Pattern:-It is used to create flat pattern for tolling technician for manufacturing purposes.

Front View

Left view

Top view

Isometric View

Bottom View

Drawing Sheet

Feature Tree

Conclusion:-Thus by using of various tool on sheet metal work bench we have completed the design of sheet metal Bracket.

LINK:- https://drive.google.com/file/d/16n2d0FrnokXKfOojp_2IKgk9wFrfGPUU/view?usp=sharing