ans 1) Battery 2) Breaker 3)Distributor 4)Starter 5) Generator 6 ) current and voltage regulator 7) ammeter 8) Fuse.   ans 2) 1) Battery -  a) Battery is a device that holds the charge and provides the required power for the circuit.  working - 1) A battery works with the help of anode, cathode and an electrolyte…

Interpolation defination -  Interpolation is the method of fitting the data points to represent the value of a function.   Types of interpolations -  Linear interpolation Nearest neighbor interpolation or Piecewise constant interpolation Polynomial interpolation Spline interpolation Mimetic interpolation…

Aim: To design a Simulink model for the DC motor will be first developed per the schematic shown in Figure 1.Use the Proportional, Integral, and Derivative (PID) control design knowledge gained in the training to design, develop and test a controller to maintain a desired speed for the motor. Objectives: 1) To design…

Aim:  Develop a double-acting actuator model using Simscape Multibody and Simscape components. Objective:  The mechanical system of the cylinder needs to be built using Simscape Multibody library components / blocks, and the hydraulic system needs to be modelled using Simscape library physical components. Theory:  The…

Aim:   Tabulate the fuel economy numbers (kmpl) for UDDS and HWFET cycle. This forms the baseline numbers for comparing with the future hybrid version. Plot the time trace for engine, transmission input, transmission output and wheel speed on one plot. Plot engine torque, engine power, fuel rate and fuel consumption…