Inputs are given to the Signal Builder and Connected with Temperature Controlled Source for maintaining the specified temperature difference across the source. Then input temperature flows through thermistor.   A doorbell is a signaling device typically placed near a door to a building's entrance. when a visitor…

1.Now the logic of washing machine concept through the line flow along chart model to connected area it among that the level of time instance next process continuous flow among the cycle time basics  &condition followed. 2.Gear shift to process along the level in the term of speed basic chart concept follow in…

  Atv:        An all -terrain vehicle (atv) refers to a motorized single -seated tri or quadricycle bike and buggy that is designed for off -road travel and activities.the vehicle consists of handlebars and low-pressure tires that have deep-threaded structures,which assist in driving over muddy,rocky,wetlands and dune…

Among the list of data with a source file data type to be identified the character with linket list of double data source file

Implement the Code for controlling the retraction and extension of Airplane’s landing gear Overview of the Project: In this project, a Finite State Machine is used to manage the retraction and extension of an airplane's landing gear (FSM). The most efficient algorithm is the FSM, which is a mathematical processing model.…

Overview of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the sensor data using moving average filter”. Goals: Measuring the distance in terms of inches of an object using Ultrasonic Distance Sensor (28015 Ping).…

Aim: Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on LCD screen. Goals:…

Overview of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the sensor data using moving average filter”. Goals: Measuring the distance in terms of inches of an object using Ultrasonic Distance Sensor (28015 Ping).…

Overview of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the sensor data using moving average filter”. Goals: Measuring the distance in terms of inches of an object using Ultrasonic Distance Sensor (28015 Ping).…

Aim: Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on LCD screen. Goals:…

Aim:        To create Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested .Every other thing to be included in the test plan can be hypothetical. Coding:…

Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.   step 1: start LDRA TBrun. step 2: From the LDRA page select source->single file->LDRA_workarea->examples->C_Testbed_examples->Testrain->Testrain.c->open.(in log view…

Project 2 - Measuring distance of an object using ultrasonic sensor (HC-SR04) Answers:          ATmega16 microcontroller needs to transmit at least 10 us trigger pulse to the HC-SR04 Trig Pin. After getting a trigger pulse, HC-SR04 automatically sends eight 40 kHz sound waves and…

Aim: To implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display. Objective: Implement a system on simulator for Controlling the DC motor using L293 motor driver. Displaying the running status of DC motor on the LCD…

  ABOUT THIS PROJECT           Distance Measurement using Arduino Ultrasonic Sensor is a very easy project to measure shorter distance precisely. Before getting started you must know about Ultrasonic Sensor HC SR-04, which is a low-cost sensor. The ultrasonic sensor is consists of Transmitter and Receiver modules. Transmitter…

Aim: Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message…