Question:1 Input will be ON for every 2 secs. Accordingly there is plunger action.     Question2: Voltage corresponding to 25C is 0.01196  

Question 1:   Used logical AND gate to run the state flow logic. Used after(N,sec) for the simulation to remain in a state.   Question: 2   Simulation time given infinity. Used Slider gain block to be able to change values in run time.            

  MODELLING OF A CONTINUOUSLY VARIABLE TRANSMISSION (CVT) BAJA ALL TERRAIN VEHICLE(ATV) MODEL in Closed Loop & Open Loop. =============================================================== CONTINUOUSLY VARIABLE TRANSMISSION (CVT) Parts: Two canonical pulleys and a steel belt make up a basic CVT. Input pulley or Drive…

Prerequisites: Updated the Signal and parameter values in ModelWorkspace. Sample time is considered 0.01 for the signals. NOTE: In the Objective, it is menetied as below, So haven't created sldd and model advisor steps and code generation. "MBD compliant changes, Data Dictionary creation & code generation is added…

Intension of this Project: To model a Adaptive Cruise Control Model as per the requirement document. Actions Taken: 1. Created a SIMULINK model for the requirement - attached the .slx file. 2. Performed the requirement tagging - attached the report document. 3. Performed Model Advisor check - attached the .htmx file with…

Aim of the Project: To design and develop Highway assistant - Lane changing assistant feature using Simulink following MAAB guidelines. Objective of the Project: Developing the MATLAB Simulink per MBD guidelines. Code Generation by Autosar Coder. Creating Simulink Data Dictionary & linking it to the model. Mapping…

                                           Traffic Jam Assistant Feature                                       …

1.Prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells.Give your detailed explanation on it   Attached the excel. ==================================================================== 2.Compare the differences…

PROGRAM: ============= #include<stdio.h>#include<stdlib.h> int tmpK=0,val,count=0, it1=1,it2=0,inter=0,inter2=0; struct linkedList{int num;struct linkedList* addr;}; struct linkedList * unionT;struct linkedList * union_out;struct linkedList * intersection;struct linkedList * intersection_out; struct linkedList…

Project 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gear =================================================================== Over View: ============ 1. Controlling the plane state using lever state from user. 2. Squat switch status from user and accordingly changing the…

Steps performed in project implementation: ============================ 1. Created requirement document and SWReq file.2. Developed simulink model. created sldd file.3. compiled the model and worked on errors received.4. performed fixed point tool analysis and updated the model with the tool suggested datatypes. new sldd…

Project 2: ---------- Steps performed in the project:1.Developed simulink model2.created sldd.3.created SWReq document.4. created requirement document.5 performed requirement tagging and generated the report and .slreqx file.6. performed fixed point tool analysis.7. performed model advisor check and generated the report.8.performed…