Mix design for M35 grade concrete with fly ash Aim: Mix design for M 35 grade concrete with fly ash Procedure: Step :1 Stipulations for proportioning Grade designation: M35 Type of cement: OPC 43 grade conforming to IS 8112 Type of mineral admixture: Fly ash confirming to IS 3812 (Part 1) Maximum nominal size of aggregates:…

Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

Create the geometries from P1 to P2 using all the coordinates system methods. You need to use the Line tool to create the geometries. Where required you need to use the circle tool. Please read the drawings and find out the missing dimensions before working on the sketches. Note: Use the Imperial Template and the Decimal…

Cross section of load bearing wall over spread footing. Aim: To draw cross section of wall over footing. Commands used: Line. Rectangle. Trim.    Procedure: Step:1 - Create rectangle by typing "REC" in command box  Specify the first corner point as (5,5) Specify the length of rectangle =0.9 units in…

AIM: To draw the geometries using Chamfer, fillet tool in Autocad. Commands used: Line, circle, chamfer, fillet, mirror, trim, move, rotate, annotate. Procedure:  1.New sheet- units- decimal-precision 0.00- meter-ok. 2.Limits- 0,0 and 420,210. 3. zoom-All. 4. Select Line tool and draw the lengths starting…

Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. Aim:To draw the layout of a residence plan. Commands used: XL-V…

AIM :           To draw residential building of dimensions 60' x 20' with the following drawings 1) ARCHITECTURAL DRAWING PLOT DRAWING GROUND FLOOR PLAN FIRST FLOOR PLAN ELEVATION VIEW 2) STRUCTURAL DRAWING SECTION VIEW FOOTIG LAYOUT COLUMN LAYOUT BEAM LAYOUT   INTRODUCTION…

i have attached the answer file.

  1) Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.     Aim:   To Create the Kitchen Layout and also, use proper dimension techniques…

i have attached the word file.

i have uploded document  

Uploded the files  

I have uploaded both files.