https://drive.google.com/open?id=1ck0Mbt2EwqjeELWT8U3T-v8fd8DGvvUI transmission belt - firstly i make the sketch and give some tangent relation there.after that i offset the entire sketch and then i extruded the sketch.on the extruded part i used fillet command and in the last last step i changed the apperance. kickstand…

meshed the given component as the given quality criteria.

https://drive.google.com/open?id=1rR1YQ26u4xNCeglHWgC9OWB2X9NS5prD oiltank - firstly i made the sketch where i used line command and dynamic mirror entitities and how to use sketch point.after this i extruded the sketch in both directions with certain dimensions.then in the other plane i again sketch the part where i give…

objective - creating the 1D elements on the given model having cross-section and dof as follows- a. Rod element - with only transational DOF and rbe2 link  cross section : BOX  dimension a = 10mm                               dimension…

objective - 3D meshing of the given housing model having :-                   minimum element size - 2mm                   maximum element size -7mm                   target element size      - 5mm                   tet collapse                 - 0.15mm          Also, 3D meshing for the given model-2 and model-4 having…

Objective - To create connectors and attaching various parts of the given frame assembly model. procedure - In the first step imported the given .hm file in the hypermesh window.                     picture representing the imported frame assembly .hm file in hypermesh   In the next step meshed all the components of the…

                                                                        project - 1   Objective - To mesh the given side door model and…

                                                                  PROJECT - 2   Objective - To mesh the given Floor Panel with target…