MODEL 1  Result as per the manual pulse generation the output of the plulse generator taken. this manual signal make the circuit closed for 2 seconds. A scope block is connencted to see the output of idea translation motion sensor to observe the position of the plunger. the plunger output is given below now we can see…

Aim: To implement the Control logic of the washing machine and gearshift mechanism using stateflow. OBJECTIVE: 1. To implement the control logic of the washing machine using state flow as per given sequence: if the power supply is available, the system gets activated. If the water supply is not available, stop the process…

AIM:   To Study and analyze the BAJA All Terrain Vehicle ATV( All terrain Vehical) model using Simulink by given link (https://www.mathworks.com/matlabcentral/fileexchange/70576-baja-all-terrain-vehicle-atv-model)   OBJECTIVES:  To prepare a technical report of Baja ATV model.  TYPES OF MODEL: BAJA ATV model without Dashboard.…

AIM : To create a Mini Project on Vehicle Direction Determination with given Requirements To Perform Code Generation, MIL & SIL Test Model Advisor Report and also creating an SLDD file.   OBJECTIVE : Development of MATLAB Simulink model as per requirement. Tagging the requirements to the simulink model; tagging…

AIM: To develop an Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink.   SOFTWARE USED: MATLAB R2020a    OVERVIEW : Adaptive Cruise Control Feature for passenger cars allows the host vehicle to adapt to the speed in line with the flow of traffic. Driving in heavy traffic…

Question 1.  What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?    Mapped Engine: Mapped Engine is the default settings in powertrain blockset. It is used to measure to measure performance parameters of the vehicle by using standard lookup…

AIM : To use the ADVISOR tool for simulation. 1. For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. 2. In the above case, try changing the battery capacity and repeat the simulation. 3. Perform gradeability…