Objective: To create connector and attach the various parts of the given model. Procedure: Firstimported the model file using the Import Geometry option under the Import. Switched to topo mode to check for solids. As there are no solids,displayed components are mid surfaces. Now selected the mid surfaces one by one to…

TASK 1 AIM: To Mesh the Turbocharger Model using the tools taught in the lecture.   Procedure:  Selected the model file and opened it by double clicking on it to work on it using CFD . Upon opening the file, by default we are in the wire frame mode so first we disabled the wire frame mode using Shadow mode tool.…

TASK 1 AIM: To Clean the Geometry of the BMW M6 Model using the tools taught in the lecture.   Procedure:  1. Selected the model file and opened it by double clicking on it to work on it using CFD . 2. Upon opening the file, by default we are in the wire frame mode so first we disabled the wire frame mode using…

Objective: To create 3D meshes for the models provided in the challenge according to the given parameters.   Task 1: To create Tetramesh for the given model with given mesh parameters. Procedure: First imported the model file using the Import Geometry option under the Import. Switched to topo mode to check for…

Objective: To mesh the given component as per the data provided. Procedure: First Imported the model file using the Import Geometry option under the Import. 2. Then deleted the solid part of the model using the Delete >Solids. 3. Now first selected one of the component of the model to work on by hiding all…

Objective: To Creat 1D elements on the parallel bracket with given cross-section and DOFs. Procedure: 1. First Imported the model IGES file using the Import Geometry option under the Import. 2. Then extracted mid surfaces from the parallel bracket components using the Midsurface command under the Geometry menu bar. Also…

Objective: To perform Batch-meshing on the components of provided models with the given criteria and assign the non-linear material property Steel to them.   Procedure: First selected the working profile as Radioss.   Imported the model file using the Import Geometry option under the Import. Model1(Hood)…

Objective: To mesh the following component as per the provided quality criteria and assign thickness. Procedure: Firstimported the model file using the Import Geometry option under the Import.   Switched to topo mode to check for solids.   In topo mode we can see some errors on surfaces(free cons),corrected them. To remove…

Objective: To create connector and attach the various parts of the given model. Procedure: First imported the model file using the Import Geometry option under the Import. Switched to topo mode to check for solids. As there are no solids,displayed components are mid surfaces. Now selected the mid surfaces one by one to…

Aim: To check for the geometrical errors and mesh the given component as per the provided element Quality criteria. Procedure: First openedthe model file using the File open   First switched to mesh module to change Length in Perimeters to have more refined visuality of the components of model. Component…

Aim: To check for the geometrical errors and mesh the given component as per the provided element Quality criteria. Procedure: First openedthe model file using the File open   First switched to mesh module to change Length in Perimeters to have more refined visuality of the components of model.  …