Praveen G V
Vehicle Crash Testing Enthusiast.
Skills Acquired at Skill-Lync :
- FEA
- HYPER-MESH
- RADIOSS
- CRASH-WORTHINESS
- LS-DYNA
Introduction
8 Projects
Comparative study of shell element formulations in a Finite Element model and it s effect on the accuracy of results
Comparing the simulation results of the base setup and improved shell element properties. Objective : The objective of this project is to simulate the given model by assigning both default elemental properties and recommended elemental properties and comparing the results obtained from the two simulation cases. Procedure…
05 Aug 2020 02:38 PM IST
Comparative study of different material models for modelling Elasto-Plastic materials
Comparison of results of the material models Law 1, Law 2 and its failure modes, Law 27 and law 36. Objective: The objective of this exercise is to compare the results obtained by modelling the material with different material models and determining the material model that best imitates/simulates the behavior of the material…
08 Jun 2020 05:44 AM IST
Study of contact modelling interface types, parameters, its accuracy on results and the structural mechanics of a tube with varying cross sectional area.
Study of contact modelling interface types, parameters, its accuracy on results and the structural mechanics of a tube with varying cross sectional area. Objective: The objectives of this project are 1. To mesh the given model 2. To study the effect of different interface types for contact modelling, on the accuracy…
06 Jul 2020 06:04 PM IST
Frontal Crash Simulation – BIW
Frontal Crash Simulation – BIW Objective: The objective of this project is to simulate frontal crash of a car’s BIW model and obtain the requested forces, acceleration and deformations experienced by the model. Case Setup: Model setup 1. The model checker is run in hypercrash immediately after importing…
09 Sep 2020 03:53 PM IST
Side Pole Impact Test – BIW
Side Pole Impact Test – BIW Objective: The objective of this project is to simulate side pole impact of a car’s BIW model, obtain the requested forces, displacements and velocities experienced by the model to study the safety of the BIW frame during a side impact with any obstacle like a tree, pole, Fitch barrel,…
18 Aug 2020 03:51 PM IST
FMVSS 216 Roof Crush Test
FMVSS 216 Roof Crush Test Objective: The objective of this project is to simulate the FMVSS 216 Roof Crush Test and determine whether the given BIW frame is in compliance with FMVSS 216 Guidelines. Case Setup and Model Setup: 1. First, the BIW model is imported in hypercrash. 2. Then, the FMVSS impactor is imported…
25 Aug 2020 07:15 AM IST
Week - 3 Drop test Challenge
Objective/Aim: The objective of this assignment is to prepare/build a complete LS-Dyna deck for drop test of a mobile phone from scratch using just the finite element model of the mobile phone and the drop surface. Explanation: Case setup/ Deck Setup (Keywords): mm,ms,Kg,KN Unit system The keywords created are mentioned…
17 Feb 2021 11:18 AM IST
Week - 4 - Crash Box Simulation
Aim: The objective of this experiment is to simulate the crash test of a crash box and record the stress, strain and all the energies Explanation: Case setup/ Deck Setup (Keywords): gm,ms,mm Unit system The keywords created are mentioned below. Section- SECTION_SHELL Shell section is created using the above-mentioned key…
24 May 2021 08:05 AM IST
2 Course Certificates
Crashworthiness Analysis using HyperMesh and Radioss
Crashworthiness Analysis using HyperMesh and Radioss
9 Workshop Certificates
How to build a world-class amusement park as a Mechanical Engineer
Academic Qualification
B.E
PERI Institute of Technology
10 Aug 2015 - 08 Apr 2019
12th
Velammal Matriculation School Mogappair (Main)
01 May 2014 - 01 May 2015
10th
Velammal Matriculation School Mogappair (Main)
04 Jun 2012 - 07 Apr 2014
Here are the courses that I have enrolled
Similar Profiles
Ladder of success cannot be climbed with hands in pocket.
The Future in Motion
Give more than what you get you will get more than what you gave
Avid learner