ISRO Scientist/Engineer Mechanical 2023 paper: Part B, aptitude, solved

Questions 81 to 95 of the ISRO Scientist/Engineer 'SC' Mechanical written test of 7 Jan 2024 (Set A): 15 questions, each solved by Skill-Lync. ISRO never published an answer key for this test, so every answer was worked out three times independently and the disagreements were settled before publishing.

Question paper published by ISRO's Centralised Recruitment Board; answers and solutions by Skill-Lync (no official key exists) · Updated 19 Nov 2026 · 15 of 95 questions on this page

ISRO 2023 · Mechanical Set A · Q.81Part B · 1 markAptitude: reasoning and verbal

Picture analogy: paint and brush, thread and ?

Which option replaces the question mark?
Paint?
  1. (a)
  2. (b)
  3. (c)
  4. (d)

Answer: (d) 4 Skill-Lync answer; ISRO published no key

Look for the relation in the first row. A tin of paint is paired with a paintbrush: the brush is the tool you use to apply the paint.

The second row must have the same relation. A spool of thread is used with a needle, which carries the thread through the cloth. Option 4 shows a needle with a thread through its eye.

The dress (1) is something made, the scissors (2) only cut the thread, and the pen (3) has no link with thread. Answer: option 4

ISRO 2023 · Mechanical Set A · Q.82Part B · 1 markAptitude: reasoning and verbal

Figure analogy: striped triangle to striped rectangle

Which option replaces the question mark?
is toasis to?
  1. (a)
  2. (b)
  3. (c)
  4. (d)

Answer: (b) B Skill-Lync answer; ISRO published no key

Compare the first pair of boxes. Three things change: the main shape turns through 90 degrees (the up-pointing triangle now points right), the small marker jumps from the top-left corner to the top-right corner, and the marker goes from outline to solid black. The stripes stay vertical, so they are not rotated with the shape.

Apply the same three changes to the tall striped rectangle. It becomes a wide rectangle, still with vertical stripes, and the small outline rectangle becomes a solid black marker in the top-right corner.

A is not turned at all, C has an unfilled marker, and D has horizontal stripes. Answer: B

ISRO 2023 · Mechanical Set A · Q.83Part B · 2 marksAptitude: reasoning and verbal

Symbol rules: shade the first item, then halve it

Which option replaces the question mark?
Makes 1st item Half sizeShades 1st itemRotates 2nd item 90 degrees anticlockwiseShifts all items one position right?
  1. (a)
  2. (b)
  3. (c)
  4. (d)

Answer: (b) B Skill-Lync answer; ISRO published no key

The rule table gives the meaning of the symbols. The circle with a solid dot shades the first item. The circle with a plus sign makes the first item half size.

The starting row is a large solid square, an empty circle and a small crescent. Apply the symbols in the order they are drawn, left to right.

  1. Shade the first item: the square is already solid, so nothing changes.
  2. Halve the first item: the square becomes half its size and stays solid.

The circle and the crescent are untouched. The result is a small solid square, the same empty circle and the same crescent. A shows a hollow square (shading would not remove the fill), C changes the wrong items, and D enlarges the crescent. Answer: B

ISRO 2023 · Mechanical Set A · Q.84Part B · 1 markAptitude: reasoning and verbal

Situational judgement: Saturday shift clashes with son's birthday

You are a retail clerk who typically works Monday through Friday. You arrive at work and notice the new schedule is posted, and your manager has given you a Saturday shift. It happens to be your son's birthday on Saturday, and you have a party planned. What is the most appropriate response?
  1. (a)Speak with your manager and explain you have a birthday party planned for your son on Saturday and ask if they can find someone else or if you can find someone to cover your shift
  2. (b)Ask your coworkers if they can cover your shift because you have a birthday party for your son planned
  3. (c)Pretend like you did not see the schedule since you always work Monday through Friday and do not show up on Saturday
  4. (d)Do not say anything to anyone, and plan on calling in sick on Saturday

Answer: (a) Speak with your manager and explain you have a birthday party planned for your son on Saturday and ask if they can find someone else or if you can find someone to cover your shift Skill-Lync answer; ISRO published no key

The manager made the schedule, so the manager is the right first person to talk to. Option (a) is honest, early and offers a way forward: you explain the clash and either let the manager arrange cover or offer to find a colleague yourself.

Option (b) goes round the manager and leaves them unaware of a change to their own schedule. Options (c) and (d) are dishonest and leave the store short-staffed with no warning, which is a serious professional lapse. Answer: (a)

ISRO 2023 · Mechanical Set A · Q.85Part B · 1 markAptitude: reasoning and verbal

Sentence completion: survey may underestimate dishonest job applicants

Which of the following best completes the passage below?
In a survey of job applicants, two-fifths admitted to being at least a little dishonest. However, the survey may underestimate the proportion of job applicants who are dishonest, because ______________.
  1. (a)some dishonest people taking the survey might have claimed on the survey to be honest
  2. (b)some generally honest people taking the survey might have claimed on the survey to be dishonest
  3. (c)some people who claimed on the survey to be at least a little dishonest may be very dishonest
  4. (d)some people who claimed on the survey to be dishonest may have been answering honestly

Answer: (a) some dishonest people taking the survey might have claimed on the survey to be honest Skill-Lync answer; ISRO published no key

The passage says the survey underestimates dishonesty: the true share is higher than the two-fifths who admitted it. So the reason must explain people who are dishonest but are not counted.

Option (a) does exactly that: dishonest respondents who claimed to be honest are missing from the count. Options (b) and (d) would make the survey count too many dishonest people, which pushes towards overestimating. Option (c) is about how dishonest the admitters are, not about how many people are dishonest. Answer: (a)

ISRO 2023 · Mechanical Set A · Q.86Part B · 2 marksAptitude: reasoning and verbal

Eight friends around a square table: people between T and Q

Eight friends P, Q, R, S, T, V, W and Y are sitting around a square table.
  1. Out of eight, four persons are sitting at the corners of the table and the other four are sitting at the mid - points of each side of the table.
  2. Persons at the corners are facing the centre while the persons at the mid - points of side are facing outside.
  3. S is third to the right of P. P is facing the centre.
  4. Y is not sitting beside P or S.
  5. T is third to the right of R.
  6. R is not sitting at the mid - point of any side of the table.
  7. R is also not beside Y.
  8. There is only one person between P and V.
  9. Q is not beside V.
How many people are there between T and Q?
  1. (a)1
  2. (b)2
  3. (c)3
  4. (d)None

Answer: (a) 1 Skill-Lync answer; ISRO published no key

Number the eight seats 0 to 7 clockwise, with the corners on the even seats and the mid-points on the odd seats. Someone facing the centre has their right hand pointing anticlockwise, so "third to the right" means three seats anticlockwise.

P faces the centre, so P is at a corner: seat 0. S is third to the right of P, so S is at seat 5 (a mid-point). R is not at a mid-point, so R is at a corner, and T is three seats anticlockwise of R, at a mid-point. V has exactly one person between it and P, so V is at seat 2 or seat 6.

Try the cases. With V at seat 2, R would be at seat 4 or 6, and Y would have nowhere to sit that is away from P and S and also away from R. With V at seat 6 and R at seat 2, T is at seat 7 and Y again has no legal seat. Only V at seat 6 with R at seat 4 works: then T is at seat 1, Y must take seat 2 (not beside P, S or R), and Q must avoid the seat beside V, so Q takes seat 3 and W takes seat 7.

Going clockwise from P: P, T, Y, Q, R, S, V, W. Between T and Q there is only Y. Reading "right" the other way round gives the mirror image of the table and the same count. Answer: 1

ISRO 2023 · Mechanical Set A · Q.87Part B · 1 markAptitude: reasoning and verbal

Domino series: which pair replaces the question mark

Which option replaces the question mark?
?
  1. (a)
  2. (b)
  3. (c)
  4. (d)

Answer: (a) 1 Skill-Lync answer; ISRO published no key

Split the row into groups of three dominoes. Count the dots on each domino (top half plus bottom half).

Group 1: 3+2, 2+1, 1+0 gives . Group 2: 0+1, 1+2, 2+3 gives , which is group 1 in reverse. Group 3 should go back to the first order: , and the last domino given is 1 over blank, which is the 1.

So the two missing dominoes are the ones with 5 and 3 dots, in that order: 3 over 2, then 2 over 1. That is option 1. Option 4 would end the group and options 2 and 3 do not give . Answer: option 1

ISRO 2023 · Mechanical Set A · Q.88Part B · 1 markAptitude: quantitative

Number puzzle: X-shaped figures, find the middle number

Which one will replace the question mark?
06241062810244141012?
  1. (a)45
  2. (b)8
  3. (c)38
  4. (d)48

Answer: (c) 38 Skill-Lync answer; ISRO published no key

Test a rule on the two complete figures. In the first, the corners add up to and the middle is , which is . In the second, and the middle is .

The rule holds both times: middle number = (sum of the four corners) .

For the third figure: , so the middle is . Answer:

ISRO 2023 · Mechanical Set A · Q.89Part B · 2 marksAptitude: reasoning and verbal

Symbol chain: reflect and flip a striped square

Which option replaces the question mark?
⌘)()(?
  1. (a)
  2. (b)
  3. (c)
  4. (d)

Answer: (d) D Skill-Lync answer; ISRO published no key

The symbols are not named, so read their effect from the worked examples. Feeding the output of the first symbol into the )( symbol turns a horizontal line near the top into a vertical line on the right, while a rising diagonal stays where it is: this is a reflection in the rising diagonal. The cross symbol, followed by the dot symbol, turns a black square with a rising diagonal and a right-hand vertical into a white square with a falling diagonal and a left-hand vertical: a left-right mirror together with a swap of black and white. The black dot symbol changes nothing in the worked examples.

Now apply them to the last picture, a black square with a horizontal line near the top and a falling diagonal.

  1. )(: the horizontal line becomes a vertical line on the right; the falling diagonal, which is at right angles to the mirror line, stays falling.
  2. Cross: mirror left to right, so the vertical line moves to the left and the diagonal becomes rising; swap colours, so the square turns white with black lines.

The result is a white square with a black rising diagonal and a vertical line on the left, which is option D. This is a reading of the symbols that fits every worked example; the paper does not define them. Answer: D

ISRO 2023 · Mechanical Set A · Q.90Part B · 1 markAptitude: reasoning and verbal

Logical deduction: storybooks with pictures and words

Fact 1 : Pictures can tell a story.
Fact 2 : All storybooks have pictures.
Fact 3 : Some storybooks have words.
If the first three statements are facts, which of the following statements must also be a fact?
I : Pictures can tell a story better than words can.
II: The stories in storybooks are very simple.
III: Some storybooks have both words and pictures.
  1. (a)I only
  2. (b)II only
  3. (c)III only
  4. (d)None of the statements is a known fact

Answer: (c) III only Skill-Lync answer; ISRO published no key

A statement must be a fact only if the three facts force it.

III: every storybook has pictures (Fact 2), and some storybooks have words (Fact 3). Those storybooks with words also have pictures, so some storybooks have both. III is forced.

I compares pictures with words, and nothing in the facts says which tells a story better. II says the stories are very simple, which is also not given. Answer: III only

ISRO 2023 · Mechanical Set A · Q.91Part B · 1 markAptitude: reasoning and verbal

Statement and courses of action: banks and RBI export credit directive

Statement : Exporters in the capital are alleging that commercial banks are violating a Reserve Bank of India directive to operate a post-shipment export credit denominated in foreign currency at international rates from January this year.
Courses of Action:
I. The officers concerned in the commercial banks are to be suspended.
II. The RBI should be asked to stop giving such directives to commercial banks.
  1. (a)Only I follow
  2. (b)Only II follows
  3. (c)Either I or II follows
  4. (d)Neither I nor II follows

Answer: (d) Neither I nor II follows Skill-Lync answer; ISRO published no key

The statement is only an allegation by exporters. A sensible course of action would be to check the complaint and make the banks follow the directive.

Course I punishes officers before anything is proved, so it does not follow. Course II asks the RBI to withdraw the very directive that is meant to help exporters; it does not deal with the banks' alleged violation. Because neither is a proper response, "either I or II" fails too. Answer: neither I nor II follows

ISRO 2023 · Mechanical Set A · Q.92Part B · 2 marksAptitude: quantitative

Find the wrong number in 7, 8, 18, 57, 228, 1165, 6996

Find out the wrong number in the series.
7, 8, 18, 57, 228, 1165, 6996
  1. (a)7
  2. (b)8
  3. (c)6996
  4. (d)228

Answer: (d) 228 Skill-Lync answer; ISRO published no key

Each term looks like the previous term times , plus , with

, , .

The next term should be , but the series shows . Checking onward with : and , both exactly as printed. The wrong number is , and it should be .

ISRO 2023 · Mechanical Set A · Q.93Part B · 1 markAptitude: quantitative

Line graph: largest difference in daily earnings

Directions : The graph given below represents the variations in earnings in rupees over a week. Study the graph and answer questions given below
The difference in earnings was large between
Earnings per day0100200300400500600700Sales in Rs.SundayMondayTuesdayWednesdayThursdayFridaySaturday
  1. (a)Sunday-Monday
  2. (b)Tuesday-Wednesday
  3. (c)Thursday-Friday
  4. (d)None of these

Answer: (a) Sunday-Monday Skill-Lync answer; ISRO published no key

Read the points off the grid lines: Sunday , Monday , Tuesday , Wednesday , Thursday , Friday , Saturday (rupees).

Sunday to Monday: . Tuesday to Wednesday: . Thursday to Friday: .

The Sunday-Monday jump is the steepest of the three, so the difference is largest there. The values are read from the picture, but the gaps (400, 350, 300) are wide enough that the order is clear. Answer: Sunday-Monday

ISRO 2023 · Mechanical Set A · Q.94Part B · 1 markAptitude: quantitative

Table: percentage increase in production of D type toys, 1983 to 1985

Study the following table carefully and answer the questions given below it:
YearsToys
ABCDE
1982200150789065
198315018010010570
19841801759211085
198519516012012575
198622018513013580
What was the percentage (approximate) increase in production of D type of toys from 1983 to 1985?
  1. (a)10
  2. (b)20
  3. (c)19
  4. (d)76

Answer: (c) 19 Skill-Lync answer; ISRO published no key

Read column D: 1983 is and 1985 is .

The nearest option is . Option (b) is the trap: it is units, not , and the base must be the 1983 value, . Answer:

ISRO 2023 · Mechanical Set A · Q.95Part B · 2 marksAptitude: quantitative

Maximum area of a rectangle with perimeter 620 mm

What is the maximum area of the rectangle with perimeter 620 mm?
  1. (a)24,025 mm2
  2. (b)22,725 mm2
  3. (c)24,000 mm2
  4. (d)24,075 mm2

Answer: (a) 24,025 mm2 Skill-Lync answer; ISRO published no key

For a fixed perimeter, the rectangle with the largest area is a square.

To see why, let the sides be and with , so . Then , which is largest when (the vertex of the parabola).

So and

Option (c) comes from sides and , which are close but not equal. Answer:

From ISRO prep to a core mechanical career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.