Multiphase flow modelling for CFD workshop: free, 54 minutes
This is a recorded live Skill-Lync workshop from 2019, 54 minutes long, with audience questions during the talk. It introduces what multiphase flows are, where they occur and why CFD is used, then classifies flows and compares modelling approaches, and ends with one stirred tank example. It is a conceptual overview, not a software tutorial.
24 chapters · published 2 Feb 2019 · 1,406 views as of 21 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical, chemical and other engineering students and early-career engineers who know basic fluid mechanics and want an introduction to how multiphase flows are classified and modelled in CFD.
What will you learn?
- Define a multiphase flow and tell the continuous phase from the dispersed phase in examples such as bubbles in water or droplets in air
- Classify flows as gas-liquid, gas-solid, liquid-gas, solid-liquid, liquid-liquid or three-phase
- Tell dispersed flows from flows with a clear interface, and see why that choice changes the CFD approach
- Recognise the mixture, Euler-Lagrange, Euler-Euler (two-fluid) and volume of fluid approaches and when each is mentioned as suitable
- Follow a general workflow from physics, mesh and grid independence to validation against experimental or literature data
- See a stirred tank with a Rushton turbine modelled as a two-fluid case, with air volume fraction and bubble size results
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:006 min · 3 chapters
What a multiphase flow is, with a hydrocyclone example
Defines a multiphase flow as two or more immiscible phases flowing together in one domain, with a continuous phase and a dispersed phase. Examples are gas bubbles in water, rain and a volcanic eruption. Then shows a hydrocyclone that separates solid from liquid, and stirred tank and fluidised bed reactors.
- 5:414 min · 2 chapters
Where multiphase flows appear
Lists applications by field: rivers, sediment transport and weather; bubble column reactors and stirred tanks in chemical plants; boilers, aircraft engines and internal combustion engines where liquid fuel breaks into droplets; coal combustion and mining; and food, pharmaceutical, biotech and cosmetic products.
- 9:366 min · 4 chapters
Why use CFD, and why validate it
Argues that plant-scale experiments are costly, opaque and give point data, and that probes may not survive high temperature or pressure. CFD can handle complex geometry and screen designs before experiments. The speaker stresses validating against experimental or literature data rather than trusting colourful plots.
- 15:4016 min · 3 chapters
Classifying flows, audience questions and coupled physics
Sorts flows by which phase is continuous: gas-liquid, gas-solid, liquid-gas, solid-liquid, liquid-liquid and three-phase (froth flotation). Audience questions cover inert gas flow, fuel sloshing, temperature (an energy equation) and pressure. Then separates dispersed flows from flows with a clear interface and lists coupled heat transfer, phase change, mass transfer and reactions.
- 31:385 min · 2 chapters
Gas-liquid and gas-solid flow regimes
Walks through the five gas-liquid regimes on the slide as the gas volume fraction rises, from separate bubbles through interacting bubbles to large slugs, and why the physics to capture differs in each. Then describes fluidised bed behaviour as gas flow rate increases, from evenly suspended particles to rising bubbles and a more turbulent bed.
- 36:477 min · 4 chapters
Multiphase modelling approaches
Introduces the mixture model (one mixture, one set of transport equations), the Euler-Lagrange approach (continuous phase solved on a grid, particles tracked with Newton's second law) and the Euler-Euler two-fluid model with drag, lift and other interface forces. Explains VOF for separated phases and notes that it is usually transient, then touches on turbulence choices.
- 43:255 min · 3 chapters
General workflow for a multiphase CFD problem
Lists the steps: establish the physics (fluid mechanics, heat transfer, reactions, bubble breakup and coalescence), choose an approach, build the geometry and mesh, run a grid independence study, solve and refine the models, validate against plant, lab or literature data, then post-process quantities such as mass transfer rates.
- 47:557 min · 3 chapters
Stirred tank example with a Rushton turbine
Shows a past stirred tank case: a pilot-scale tank with a Rushton turbine, a flat disk with six blades, meshed as a symmetric section and solved with the Euler-Euler two-fluid framework. Results show air from a sparger ring dispersed through water, and mean bubble size compared with literature data. The workshop ends with who the course suits.
Is the Multiphase Flow Modelling for CFD Workshop course really free?
Yes. All 54 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Feb 2019 and had 1,406 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Multiphase Flow Modelling for CFD Workshop course take to finish?
The video runs 54 min across 24 chapters. That fits in one sitting of under an hour; plan roughly twice that if you practise each exercise as you go. The longest section is "Classifying flows, audience questions and coupled physics" (16 min), so give it your full attention.
Does the free multiphase CFD course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Introduction to GUI-based CFD using Ansys Fluent (free lessons), then Introduction to GUI based CFD using ANSYS Fluent (₹40,000), then Post Graduate Program in Computational Fluid Dynamics (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Does this workshop show how to use Ansys Fluent?
No. The speaker says early on that the session will not look at any Fluent example as such. Fluent is named as the solver for the workflow and for a stirred tank case solved in the past, but only results slides are shown, with no software screens. The talk is about multiphase flow concepts and choosing a modelling approach.
What are the main ways to model a multiphase flow in CFD?
The speaker names the mixture model, the Euler-Lagrange approach (a continuous phase solved on a grid, with particles tracked individually), the Euler-Euler or two-fluid model (both phases solved as interpenetrating fluids with interface forces such as drag), and volume of fluid for phases separated by a clear interface. The talk gives each a short description only.
What does the stirred tank example show?
A past case of a pilot-scale stirred tank with a Rushton turbine (a flat disk with six vertical blades) filled with water, with air injected from a ring. It was solved as a two-fluid model on a symmetric section. The slides show air volume fraction and a mean bubble size compared with data from the literature.
Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course