Introduction to GUI based CFD using ANSYS Fluent course by Skill-LyncFree · 3 lessons · no payment

Introduction to GUI based CFD using ANSYS Fluent: 3 free lessons

Three free lessons from Skill-Lync's Introduction to GUI based CFD using ANSYS Fluent course. They give the course roadmap and a mixing-pipe mesh refinement study, then work through flow over a 2D cylinder with vortex shedding. They finish with the Ahmed body car model, covering enclosure setup, inflation layers, CFD-Post line plots and grid dependence.

Last updated 16 Nov 2026 · 3 free lessons (3 h 5 min) · full course: 11 lessons (15 h 52 min), paid · ₹40,000

Lesson 1 of Introduction to GUI based CFD using ANSYS Fluent: Course Roadmap, Simulation Types and a Mesh Refinement StudyFree lesson 1 · 92 minCourse Roadmap, Simulation Types and a Mesh Refinement Study

What will you learn in the free Introduction to GUI based CFD using ANSYS Fluent lessons?

  • Mesh refinement and grid dependence testing
  • Steady versus transient simulation setup
  • Setting Reynolds number with a custom fluid
  • Inflation layers and CFD-Post velocity plots

Free lessons you can watch now

  1. Free lesson 1: Course Roadmap, Simulation Types and a Mesh Refinement StudyLesson 1 · 92 min · 7 partsCourse Roadmap, Simulation Types and a Mesh Refinement StudyThe instructor describes the course contents, who it suits and the weekly simulation problems, starting with a mixing tee and a cylinder. He overviews topics such as combustion and porous media, then demonstrates a finer mesh in Fluent and a grid dependence test.
  2. Free lesson 2: 2D Flow Over a Cylinder: Vortex Shedding, Steady vs TransientLesson 2 · 48 min · 2 parts2D Flow Over a Cylinder: Vortex Shedding, Steady vs TransientThis lesson sets up 2D flow over a cylinder in ANSYS Fluent, using a custom fluid viscosity to control the Reynolds number between 20 and 100. It adds a monitor point and compares a steady run with a transient run, which captures vortex shedding.
  3. Free lesson 3: Ahmed Body Car Model: Enclosure, Inflation Layers and Post-ProcessingLesson 3 · 44 min · 2 partsAhmed Body Car Model: Enclosure, Inflation Layers and Post-ProcessingThe instructor introduces the Ahmed body as a validation model for CFD and builds the flow domain in SpaceClaim using the enclosure tool. He then adds inflation layers, plots vectors and velocity profiles along lines in CFD Post, and sets a grid dependence challenge.

Which lessons of Introduction to GUI based CFD using ANSYS Fluent are free?

The first 3 lessons are free on Grow by Skill-Lync: 3 h 5 min of video from Skill-Lync's Introduction to GUI based CFD using ANSYS Fluent course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 8 lessons are listed in the outline below so you can see what each one covers.

How long is the Introduction to GUI based CFD using ANSYS Fluent course?

The full course has 11 lessons and 15 h 52 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 3 h 5 min, so you can finish them in an evening and decide whether to continue.

What comes after the free lessons?

Lesson 4 onwards is in the paid Introduction to GUI based CFD using ANSYS Fluent course on Skill-Lync, with mentor support and a certificate. For a career in CFD, the Post Graduate Program in Computational Fluid Dynamics goes further with industry projects and placement support.

Liked the free lessons?

Get the full course syllabus and fees.

The full Introduction to GUI based CFD using ANSYS Fluent course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Introduction to GUI based CFD using ANSYS Fluent course

The remaining 8 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.