Full course · free on YouTube · 56 min

Advanced CFD intro with turbulence models and y+: free, 56 minutes

This is a 56-minute slide-based webinar with no software demonstration. After a short welcome, it moves from what CFD is and what a CFD engineer does to the governing equations, the pre-processing, solver and post-processing workflow, mesh independence, verification and validation, turbulence models and y+, applications, commercial software, challenges and job areas.

11 chapters · published 6 Dec 2024 · 2,666 views as of 21 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and aerospace students and early-career engineers who want a software-free overview of how a CFD study is set up, checked and used in industry.

What will you learn?

  • Explain why the Navier-Stokes equations are discretised and solved numerically for most real problems
  • List the tasks of an entry-level CFD engineer, from CAD clean-up and meshing to reporting
  • Describe the three-stage workflow of pre-processing, solver setup and post-processing, and what is checked in each
  • Say what a mesh independence check shows and how verification differs from validation
  • Name the RANS, DNS and LES approaches and the turbulence models the speaker covers, and describe what y+ is used for
  • Give examples of CFD work in automotive, aerospace and biomedical devices

What does each part of the course cover?

7 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.

  1. 5:473 min · 1 chapter

    What CFD is and why it is solved numerically

    Defines CFD as predicting fluid flow by solving mathematical equations numerically. Notes that the Navier-Stokes equations have exact solutions only for simplified cases such as pipe flow or flow between parallel plates, so the domain is discretised and the equations are approximated as algebraic equations solved cell by cell.

    Chapters
    • 5:47What CFD is: solving the Navier-Stokes equations numerically
  2. 8:493 min · 1 chapter

    What a CFD engineer does

    Lists the entry-level responsibilities in an industry CFD team: studying and cleaning up the CAD geometry, meshing and solver setup, understanding the flow physics, interpreting results and writing the report, suggesting design changes, optimisation studies toward targets such as pressure drop or drag, and talking to other teams.

    Chapters
    • 8:49Responsibilities of an entry-level CFD engineer
  3. 11:378 min · 2 chapters

    Governing principles and the CFD workflow

    Covers the mass and momentum equations (with energy added when heat transfer is involved), spatial discretisation into cells, temporal discretisation for steady and unsteady flow, laminar versus turbulent flow, and inlet boundary conditions. Then lays out the three-stage workflow: pre-processing, solver setup and run, post-processing of velocity, forces and temperature.

    Chapters
    • 11:37Governing equations, discretisation, flow type and boundary conditions
    • 17:22The CFD workflow: pre-processing, solver and post-processing
  4. 19:307 min · 2 chapters

    Mesh independence, verification and validation

    Shows four meshes of a pipe with a sudden expansion and the centre-line velocity plotted for each, to make the point that results should not depend on the mesh. Then separates verification, the accuracy of the numerical solution, from validation, comparison with experiment, and says the error against experimental data should be quantified.

    Chapters
    • 19:30Mesh independence: comparing four meshes of one pipe
    • 22:26Verification and validation against experimental data
  5. 26:4016 min · 1 chapter

    Turbulence models and y+

    Describes turbulence and the near-wall layers, then RANS and the Reynolds stress term that turbulence models close. Presents k-epsilon, k-omega and SST k-omega as the speaker sees their uses, then DNS and LES, and ends with y+ as the way to choose the first cell height, including the flat-plate wall shear stress estimate.

    Chapters
    • 26:40Turbulence, RANS models, DNS, LES and the y+ first cell height
  6. 42:558 min · 1 chapter

    Applications in automotive, aerospace and biomedical work

    Walks through example CFD work in three areas: drag and lift, underhood thermal management, cooling airflow, cabin airflow and ducts for vehicles; aerofoils, cabin comfort, propulsion and hypersonic vehicles for aerospace; and blood pumps, stents, heart valves and aneurysms in biomedical devices.

    Chapters
    • 42:55CFD applications in automotive, aerospace and biomedical work
  7. 51:075 min · 3 chapters

    Commercial software, challenges and job areas

    Names commonly used tools for pre-processing, solving and post-processing, then repeats the main challenges: assumptions and approximations, mesh quality against computing power, convergence and parameter choices, and validating against experiments. Ends with the speaker's view of where CFD engineers work at the December 2024 recording.

    Chapters
    • 51:07Commercial CFD software used for pre-processing, solving and post-processing
    • 52:00Challenges in CFD: approximations, mesh, convergence and validation
    • 53:52Job opportunities for CFD engineers (speaker's view, December 2024)

Is the Introduction to Advanced CFD Analysis course really free?

Yes. All 56 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 6 Dec 2024 and had 2,666 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Introduction to Advanced CFD Analysis course take to finish?

The video runs 56 min across 11 chapters. That fits in one sitting of under an hour; plan roughly twice that if you practise each exercise as you go. The longest section is "Turbulence models and y+" (16 min), so give it your full attention.

Does the free CFD course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Introduction to GUI based CFD using ANSYS Fluent (free lessons), then Introduction to GUI based CFD using ANSYS Fluent (₹40,000), then Post Graduate Program in Computational Fluid Dynamics (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Which turbulence models does the advanced CFD introduction cover?

The speaker covers k-epsilon, k-omega and SST k-omega as RANS models, then DNS and LES. Each gets a short description and the speaker's view of where it is used, followed by y+ and how it sets the first cell height. It is an overview of the practical side, not a derivation, and the speaker says the mathematics is skipped.

Does the advanced CFD introduction use any CFD software?

No. It is a slide presentation and there is no solver demonstration. The speaker lists commonly used tools near the end, including ANSA and HyperMesh for pre-processing, Ansys Fluent and STAR-CCM+ for solving and CFD-Post for post-processing, and says industry users pick options in the software rather than code the solver.

What is mesh independence in CFD?

The speaker says the solution should not depend on the mesh. A pipe with a sudden expansion is meshed four ways with increasing element counts and the centre-line velocity is plotted for each. The slide deliberately shows differing curves, and the speaker says that in a real study the profiles should agree: compare two or three meshes, choose the mesh accordingly, and confirm this before a big project.

Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Introduction to Advanced CFD Analysis and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Introduction to Advanced CFD Analysis course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.