Battery cooling with OpenFOAM workshop: free, 55 minutes
This is a January 2023 recording of a live Skill-Lync workshop, 55 minutes long. Most of it is theory and published examples: cells, C-rate, thermal runaway, cooling methods and convection. A CFD case study of 21 cells and a short OpenFOAM natural convection demo come at the end, so it is an introduction rather than an OpenFOAM tutorial.
24 chapters · published 27 Jan 2023 · 2,541 views as of 21 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical, automotive and electrical engineering students who know basic heat transfer and want a CFD-focused introduction to cooling lithium-ion battery packs.
What will you learn?
- Explain how cells, modules and packs are built and what series and parallel connection do to voltage and capacity.
- Describe C-rate as load current relative to cell capacity and why heavy discharge generates more heat through resistance.
- Recall the thermal runaway stages the speaker gives and why packs are kept in a 15 to 35 °C range with no hotspots.
- Compare air, liquid and phase change material cooling, and natural against forced convection.
- Recall Newton's law of cooling, the Reynolds and Nusselt numbers and typical heat transfer coefficient ranges for gases and liquids.
- See how a CFD cell-block case is described (mesh size, inflation layers, solver type, turbulence model) and watch a short OpenFOAM natural convection run.
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:006 min · 2 chapters
Why battery cooling matters
Opens with a definition of CFD and an outline: why batteries, what a battery is, thermal runaway, thermal management and analysis methods. Then shows an EV fire photo, the speaker's reasons for heat being a problem in a hot country, and the speaker's case for electric vehicles in 2023.
- 5:408 min · 4 chapters
EV battery basics: cells, modules, packs, series and parallel
Names the main EV components and the position of the pack low in the car, then explains why lithium-ion is used. Covers anode, cathode and electrolyte, the cell, module and pack hierarchy, and series against parallel wiring of cells (4.2 V maximum on the slide), using a water-tank analogy.
- 14:037 min · 2 chapters
C-rate and why batteries heat up
Introduces C-rate as a way to describe load current against cell capacity, with 1000 mAh examples worked as a quiz with the audience. Then links discharge current to heat through the I²R power formula and resistance, with a water-heater analogy.
- 20:355 min · 3 chapters
Thermal runaway and temperature limits
Walks through the temperature stages the speaker gives for thermal runaway, from the interface layer breaking down to separator melting and cathode decomposition. Gives the 15 to 35 °C operating range, long-term damage from heat, and why a thermal management system must avoid hotspots.
- 25:179 min · 4 chapters
Cooling methods and convection theory
Lists liquid, air and phase change cooling, and natural against forced convection. Then covers convection with a leaf-in-a-river analogy, Newton's law of cooling, Reynolds and Nusselt numbers and typical heat transfer coefficient ranges for gases and liquids.
- 34:0113 min · 5 chapters
Air, liquid and PCM cooling examples
Goes through published examples: air cooling advantages and trade-offs, inlet air strategies, hybrid fan control, the effect of 0, 2 and 4 mm spacing between cells, liquid coolants and phase change materials with fins. The speaker notes the best choice depends on the case.
- 46:575 min · 2 chapters
CFD case study and solver choice
Shows a Skill-Lync analysis of 21 cells in a 7 by 3 layout inside an air domain with an inlet and outlet, a 2 mm element size with inflation layers and a k-epsilon model. Then answers questions on pressure-based against density-based solvers and the Mach number limit.
- 52:053 min · 2 chapters
OpenFOAM natural convection demo
Briefly shows an OpenFOAM simulation of a heated solid block with no cooling in natural convection, with a constant volumetric heat source. The temperature rises without limit, which the speaker calls non-physical, and buoyancy-driven air streamlines are shown around the block.
Is the Battery Cooling Using OpenFOAM course really free?
Yes. All 56 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 27 Jan 2023 and had 2,541 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Battery Cooling Using OpenFOAM course take to finish?
The video runs 56 min across 24 chapters. That fits in one sitting of under an hour; plan roughly twice that if you practise each exercise as you go. The longest section is "Air, liquid and PCM cooling examples" (13 min), so give it your full attention.
Does the free battery cooling course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Introduction to OpenFOAM Development (free lessons), then Battery Thermal Management using Ansys Fluent and MATLAB (₹40,000), then Post Graduate Program in Battery Technology for Mechanical Engineers (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Is this a hands-on OpenFOAM tutorial for battery cooling?
No. Only about the last four minutes show OpenFOAM, a heated solid block with no cooling in natural convection with streamlines. The rest is theory, published results and a described case study whose solver is not named, so the video introduces the topic rather than teaching case set-up step by step. No installation steps are given.
When should a pressure-based solver be used for a battery pack?
The speaker says a pressure-based solver suits a battery pack because the Mach number stays below 0.3 and air speed is only a few metres per second, so density hardly changes. Density-based solvers are for high-speed cases with large density change. The speaker adds that in current solvers such as Ansys Fluent the choice matters less.
What does the video say about natural against forced convection?
The speaker explains natural convection as air rising because heat makes it less dense, and forced convection as air pushed by a fan or pump. Gases give lower heat transfer coefficients than liquids, so air is cheaper and lighter while liquid cools harder but risks leaks. A hybrid system switches a fan on only at a temperature threshold.
Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course