Full course · free on YouTube · 1 h 2 min

Battery thermal management workshop: free, 1 hour

This is a March 2023 recording of a live Skill-Lync workshop, 1 hour 2 minutes long. It starts with EV scooter fires, cells, C-rate and thermal runaway, then covers cooling methods and convection basics, and ends with CFD results and a case study of air cooling a block of cylindrical cells.

24 chapters · published 20 Mar 2023 · 7,217 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical, automotive and electrical engineering students who know basic heat transfer and want to see why EV battery packs need cooling and how a CFD study of air cooling is set up.

What will you learn?

  • Explain how cells, modules and packs are built, and calculate pack voltage and capacity for series and parallel layouts (for example 3 in series and 6 in parallel of 4.2 V, 3.4 Ah cells).
  • Calculate C-rate as load current divided by capacity, and relate a higher C-rate to more heat generated.
  • Describe the stages of thermal runaway and why a pack is kept within 15 to 35 °C with a cell-to-cell spread of at most 5 °C.
  • Compare air, liquid, heat pipe and phase change cooling, and active versus passive systems.
  • Recall Newton's law of cooling, the Reynolds and Nusselt numbers and typical heat transfer coefficient ranges.
  • Follow how a CFD heat transfer case for a cell block is set up: geometry, mesh, solver, boundary conditions and temperature contours.

What does each part of the course cover?

9 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:008 min · 3 chapters

    Why scooters catch fire, and why EVs use batteries

    Opens with news of electric scooters catching fire and takes answers from the audience (overheating, poor thermal management). Then gives the reasons for moving to electric vehicles, pollution and fossil-fuel supply, and lists the main EV components, with the battery pack as the central one.

    Chapters
    • 0:00Welcome and session outline
    • 1:38Why electric scooters catch fire: audience answers
    • 5:02Why electric vehicles, and the main EV components
  2. 8:1110 min · 3 chapters

    Battery basics: chemistry, cell, module, pack, series and parallel

    Compares battery chemistries and explains why lithium-ion is the common choice. Describes anode, cathode, separator and electrolyte, then cell shapes and the cell, module and pack hierarchy. Works a series and parallel example: three 4.2 V cells in series give 12.6 V, and six 3.4 Ah cells in parallel give 20.4 Ah.

    Chapters
    • 8:11Battery chemistries and how a lithium-ion cell works
    • 13:16Cell shapes, and cell, module and pack
    • 14:47Cells in series and in parallel
  3. 17:563 min · 1 chapter

    C-rate

    Defines C-rate as the load current divided by the battery capacity, using a 1000 mAh battery: a 500 mA load is 0.5C and lasts two hours, 1000 mA is 1C, 2000 mA is 2C. Links a higher C-rate to more heat generated inside the cell.

    Chapters
    • 17:56C-rate and why it drives heat generation
  4. 20:388 min · 3 chapters

    Thermal runaway and the case for temperature control

    Walks through the temperature stages the speaker gives for thermal runaway, from the anode surface layer decomposing near 80 °C to the separator melting, the cathode releasing oxygen and runaway at 180 °C. Gives the 15 to 35 °C operating range, heating in cold climates and a pack temperature difference limit of 5 °C.

    Chapters
    • 20:38Thermal runaway: the temperature stages
    • 25:43Operating temperature range and heating in cold climates
    • 26:58Why the pack needs a thermal management system (5 °C limit)
  5. 28:515 min · 1 chapter

    Battery cooling methods

    Compares air and liquid as cooling media, active (fan, blower, pump) and passive (natural convection) systems, and the design variables for air cooling such as inlet and outlet placement, spacing, velocity and flow rate. Also covers liquid options (immersion, cold plates, water jackets), heat pipes and phase change materials.

    Chapters
    • 28:51Cooling methods: air, liquid, active and passive, heat pipes, PCM
  6. 33:3912 min · 5 chapters

    Convection fundamentals for cooling design

    Uses a chat quiz on natural and forced convection (processor, projector, engine, human body), then recalls Newton's law of cooling, Q = hAΔT, the Reynolds number ρvL/μ with laminar and turbulent ranges, the Nusselt number hL/k, and typical heat transfer coefficient ranges for gases and liquids.

    Chapters
    • 33:39Natural and forced convection: everyday examples
    • 37:50Newton's law of cooling and the heat transfer coefficient
    • 39:27Reynolds number and flow regimes
    • 41:19Nusselt number
    • 42:37Natural versus forced convection, and typical h values
  7. 45:257 min · 3 chapters

    Air cooling of a battery pack in CFD

    Shows pack temperature maps from the literature for natural cooling, top-inlet and lateral-inlet layouts, and for cell gaps of none, 2 mm and 4 mm. Then plays a CFD animation of a pack at 1C with and without 5 m/s air, with a peak near 55 °C uncooled and about 46 °C cooled.

    Chapters
    • 45:25Air cooling of a battery pack: CFD results from the literature
    • 47:57Cell spacing and other design parameters
    • 50:01Skill-Lync CFD animation: with and without air cooling
  8. 52:037 min · 4 chapters

    Case study: forced-air cooling of 21 cylindrical cells

    Sets up a heat transfer case for a 7 by 3 block of 18650 cells in an air enclosure with 25 °C, 5 m/s inlet air. Covers geometry, named selections, an inflation-layer mesh with 2 mm elements, solver settings, boundary conditions, initialisation and the streamline and temperature results.

    Chapters
    • 52:03Case study set-up: 21 cylindrical cells in an air enclosure
    • 53:46Geometry, named selections and mesh
    • 55:35Solver settings, boundary conditions and initialisation
    • 57:14Post-processing: streamlines and temperature contours
  9. 59:233 min · 1 chapter

    Other cases and where to go next

    Mentions a higher-rate discharge case, a single-cell 1C case with air at 5 m/s, and why liquid cooling needs a cold plate rather than direct contact with cells. Notes that air is a poor conductor, so changing the coolant or flow is the next step.

    Chapters
    • 59:23Other cases, liquid cooling and closing remarks

Is the Battery Thermal Management Systems Design course really free?

Yes. All 1 h 2 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 20 Mar 2023 and had 7,217 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Battery Thermal Management Systems Design course take to finish?

The video runs 1 h 2 min across 24 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Convection fundamentals for cooling design" (12 min), so give it its own days.

Does the free battery thermal management course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Battery Thermal Management using Ansys Fluent and MATLAB (₹40,000), then Post Graduate Program in Battery Technology for Mechanical Engineers (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

What software does the battery thermal workshop use?

The demo is a CFD heat transfer study. The case-study geometry is built in Ansys SpaceClaim; the CFD solver is not named clearly in the recording. No licence or install steps are given. The speaker expects some heat transfer background from a bachelor's course.

What temperature difference should a battery pack stay within?

The speaker recommends a desired operating range of 15 to 35 °C and a maximum temperature difference of 5 °C between cells in a pack. Uneven temperature ages cells faster and reduces power capacity through internal resistance, which is why a thermal management system is used.

What does the cell spacing CFD example show?

Literature results compare packs with no gap, 2 mm and 4 mm between cells. A larger gap does not remove hot spots on its own, so the speaker says spacing has to be optimised for both lower and more uniform temperature. The video also shows air at 5 m/s limiting a pack to about 46 °C.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Battery Thermal Management Systems Design and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Battery Thermal Management Systems Design course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.