← Course overviewFree lesson 1 of 3 · lesson 1 of 56Next lesson →

Unlock all 56 lessons of Structural Design of Highrise Precast Buildings using ETABSFull course ₹40,000 · paid

Price & syllabus
Free lesson · 23 min · no payment

Introduction to Precast Structures and the Course Outline

A free lesson from Skill-Lync's Structural Design of Highrise Precast Buildings using ETABS course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Structural Design of Highrise Precast Buildings using ETABS lesson?

The instructor outlines the 12 week course and a sample ground plus 15 storey semi-precast building. The lesson explains how precast differs from cast in place work, why transportation, lifting and demolding stages need checking, and previews diaphragm design, robustness and the choice of ETABS.

  • How precast differs from cast in place construction
  • Extra design stages: demolding, lifting, transport
  • Why controlled factory production improves strength and finish
  • Topics ahead: diaphragms, robustness, ETABS modelling

What comes after lesson 1?

The next free lesson is lesson 2, “Precast Casting, Typical Elements and Connections” (29 min). Later in Skill-Lync's Structural Design of Highrise Precast Buildings using ETABS course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 56 lessons (22 h 56 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, everyone. I welcome you to the course. The topic of the course is Structural Design of High-Rise Precast Building. So, as the name suggests, the course is going to cover structural design of a precast building. And the building will be almost completely precast. Only the foundation of part of it would be a cast in place. I think the complete course that we are going to have in this particular course would be of 12 weeks. And each week would comprise of 12 hours of content that you have. Apart from that, each week will be further divided into subparts of around half an hour or so.

This covers the complete structural design of a project, including the concept stage analysis, setting up the structural schema of that particular building, and then working out the analytical model that we have, working out the roads that we need to take to design that particular building that is there. Moving further, then we will be going on to design the foundation of that building as well, as well as doing the member, as well as the connection design for the precast structure. Moving further, I think we will continue for the first week that we have. In week 1, we have in store for you the introduction to precast structures and the course outline.

Since most of you wouldn't have worked upon precast structures and it is presumed in this course that your knowledge of precast structures is very basic. It could be almost zero also and you can take up that course. So, it actually takes you from the right scratch to develop your understanding about the precast structure to the very end that how precast structures are to be detailed and designed further. Also, in this course, we will be talking about the course outline, which is basically since this is the very first course of this very first week session, then it has to cover almost everything that we are going to do into the course.

So, I think this is mostly about the course that we have. We have taken a sample precast building situated in India and we are designing that building using the Indian code of structural design. That's most about it and I think it will be a pretty much interesting topic to learn about and it can surely enhance your knowledge and expertise in structural design. So, let's get on to the week one that we are moving further on week one. So, content that we have for this particular week would be the course outline.

So, the first and the very foremost thing, we will be talking about what exactly the course has in store for you, what exactly we are going to do for the next coming 12 weeks and what all a student or a person who enrolls through this particular course. Next on, we will be talking about introduction to the precast structures. It will be a basic introduction that it nudges you towards like how precast structures are different from the conventional cast institute or a steel building is something additional that we need to do while dealing with precast structures.

It further covers the need and the challenge of the precast structures. What has been the need that precast structures came into picture and what challenges is faced when a person is working upon precast structures. Further challenge that one needs to cover. Then, the further thing that we follow is the technical basis. What technical basis is need to be followed for a precast design course. So, I must tell you it's not a conventional steel or concrete projects since those projects are usually designed for service stage or maybe some projects are designed for erection stage as well.

So, there could be a certain analysis that they must be doing at the erection stage. But otherwise, almost all the structures that we have, be it a completely concrete cast on site project, those are only designed for service stage rather than the other any design stage. Whereas, if you are dealing with a precast project, you need to actually be sure that you have to take consideration of other design stages as well, which would be the transportation stage. When the elements are being the precast element, which are going to be assembled at site, those are designed for transportation stage as well as for the lifting stage for the demolding stage.

So, these are the additional stages that you need to consider while you are designing the precast structures and that actually makes good sum of amount and actually affects your overall idea of the precast design concept. Moving further, as I told you, we will be taking a sample building in this course and which will follow almost throughout the entire course as our building to be designed for. So, we will be using the architectural layout of that building. That building would be ground plus 15-story building. As I told you, that building would be semi-precast. The ground above structure will be completely precast and the foundation would be of cast and place concrete, which we will be also covering in terms of how the foundation design would be.

You guys must already would know that architecture layout is the very must thing or I would say the very first thing you should ask for when you are working in a project through your client. These are one of the very first thing that you should know. So, that is that works as an input for the structural engineer using that architecture layout. So, you will start building upon your structural schema, how the structural members in your building would be spanning, what all things you need to cover.

That is that. Then we will be having some brief about the building that we have taken. What, where is it located? What are its structural parameters? What additional loads do we need to follow? What is the occupancy of the building? What exactly the uses of that particular building is? So, all those things we need to cover. Further, we will also be taking the structural code. Since it's a precast building, there are few codes that we need to follow related to precast. Apart from that, there are still some codes that usually follows for building design, which are usually the IS456 for a concrete building, IS875 for the industrial codes for load application.

All those would be covered and all other codes that we are going to use, especially for precast, if there is any other code that we are following that will be covered in this particular session. And further on, it will be also covering the analysis software that we have. So, I should tell you, there are plenty of softwares which can actually help you in precast design per se. They have multiple capabilities to work upon. But I must tell you, for this particular course, we are going to use analysis software called ETABS.

I know many of you would have already worked because it is very prevalent in building industry, but there are other good tools as well while working with precast building, namely, two sort FEM design and I would say Autodesk robot also. But for this particular course, we have chosen CSI ETABS to work for. So, the learning objective for this week's session. By the end of this presentation, you will have basic understanding about precast structures. So, since you will be covering what all things are there in precast structures, what exactly the way of construction is in a precast building, how the elements are constructed on a factory or a site-based plant.

And then those are further transported onto the construction site and stored there for some time, let's say, if needed and then erected and assembled as per the connection designed at the concept stage. This is what we will be covering so that you will have a certain understanding what all types of elements are there in this. That is one of the key objectives through this particular week's session. The presentation nudges you to think towards the challenges faced during the precast construction. So, as I mentioned in the last slide as well, precast construction is very different in terms of how things are done at site and how things are done in factory.

And there are other things that you need to actually think about. So, you could actually work out a very great solution, but it's not viable or in fact feasible to do at site in terms of construction, in terms of assembly of those parts, then it's of no good. Since we will be thinking of that terms, this is one and foremost thing that it will nudge you to think about what all things can be made precast. You can start thinking about, can you make, you guys must be sitting in a room or in a school or in a certain building, can you make that particular building precast?

And if you can make that particular building precast, what all things do you need to consider? So, this is basically, it ignites your acumen towards what challenges one could face when designing a precast build. After understanding the presentation, you should be able to read the architectural layout and the drawings and develop structural plans accordingly. As I told you, since this is the very key component of a structural engineer's life and when he or she needs to actually learn to study this architectural drawing, because those are the input for us.

Now, that doesn't mean that it's very related to the precast project that we have, it can be any other project, but at least you need to know that how, what exactly, on an architectural layout, what thing means what. And using those understanding of those architectural drawings, you have to develop your structure plans, like where the structural members are going to be. How can we actually come up with the structures? KEMA, which is actually working for the structural integrity as well as the architecture layout of that particular building or architecture feature of the particular building.

The student will be equipped to know the structural codes needed to design a pre-cast buildings. So whatever things that we are covering, we'll be covering whatever structural codes that we'll be needing throughout the entire course. Like whatever is needed, be it for loads, be it for artcooker-resistant design, be it for concrete design, be it for pre-casts and whatever codes that we are going to need, you will be actually told about this, those in this very presentation. Also, it could be a good exercise for you if you can go back and look onto those codes so that you know very well before we can actually start on those things into the coming session.

The students will get a brief idea about the analysis software which are to be used. So as I told you, we are using ETABS in this course. It will come up as we move forward in the course after two, three weeks. Once we have developed the architecture, the structure plans and the service system that we are going to use. So I guess that's mostly about it. I should jump to the next slide that we have. And it covers the course outline. The course outline as I told you, what exactly we are going to do for next 12 weeks that you should know.

So, it will be first in this week's session itself, it will be a brief intro about the pre-casts complete structures, its uses and application in the industry. Like where all could you use it? Now in India, these are being used across multiple regions. In not even buildings, you must be seeing small, small pre-casts things that are happening around you. You can find them around you itself. You must have seen boundary walls of certain farmhouses. Those are being done as pre-casts. So ignite your curiosity there and just see how the structural system for those is working.

You must have seen the pre-casts drains that we have, where they have the pre-casts drains, U-shaped drain and then we have their glids also. So it's basically, we'll be covering that. It will cover a brief introduction of what pre-casts structures are and how exactly its uses, their uses and applications are in the industry. As I told you, we are going to take a ground plus 15 story building in this particular course. And we'll develop the concept structural system for it, first of all, because this is, as you must be knowing, some of you might or might not have worked up on a structural design project before this, before entrolling for this particular course.

But actually, you would know that as you get the architecture plan, you'll have to actually work out a concept structural system rather than going in detail. So it's sort of a concept study, how exactly the structural system is going to be, how are you going to tackle down the loads that you have, the vertical loads, the gravity loads and similarly the literal loads that you get from the wind or earthquake per se. Further, we'll be having in that course, developing the structural framing plan to ground the vertical and lateral forces.

So as I told you, once we have the architectural plans, we'll be working on structural framing plans so that how can we ground the vertical forces that we are getting. Vertical forces, in our case, could be dead load, superimposed dead load of structure, loads due to the finishes, load due to the facade walls that we have, facade as in the building facades, maybe could be a brick load that we need to consider. Then there could be snow load if there is a possibility in our chosen geography.

So all those things we need to think upon. Similarly, for lateral forces, it will be the earthquake forces that we need to consider, the earth pressure, if there is any that we need to consider, how we are planning to ground those earth pressure throughout building, throughout building system. Then it will be developing the precast schema of the building and breaking down to the precast elements and schematic correction. So once we have developed the structural framing plan, we have to think like how we are planning to have that as a precast scheme, how we are actually going to break down.

On each and every element and what all elements we are going to consider that in that particular case and how the connections are going to be are all are we planning to keep all the nations as spend. Are we keeping a different sort of connection in a particular place, how we are planning to connect the beam or slab, all those things. Then we move on to the detail designs once we have fixed the overall schema in terms of qualitative study rather than the quantitative one that we have fixed in terms of that.

Then we get on to the detail design. Detail design would include the load combinations, load calculations, strength and SLS parameters that we need to consider. This will again depend precisely as we have to do that because we have passed on to the qualitative system. Now we are actually into calculating the actual amount of loads that we are moving further. Next slide. Then it would be the preparing the analytical model for the buildings, the structure and heat apps, geometry, loading, connections, foundation. So once we have actually fixed in terms of what we are going to have in terms of loads that we have in the system, what member size is, typical member size, not exactly the detailed member size, but what typical member sizes that we do have.

Then next thing would be analyzing the behavior of the analytical model. I think that is very crucial once you have set up your structural model, you actually need to go and figure out that the model that you made is accurate or not. Is it behaving the way we intended to be? I would say the behavior is quite realistic or not, or is it deflecting in very odd sort of end? So for those things, what we need to check, we need to check the deflected shape in terms of qualitative values, in terms of quantitatives, how the deflections are looking, how the reactions are looking, how the mode shapes are looking, is there, are there any uplift?

So that's all we'll be checking. Next, we'll be having that is foundation design for a particular building. Once we have fixed our model in heat apps, we have actually scrutinized the model is correct. We go on to the foundation design and foundation design for this particular project we'll be using, say, for this particular case and doing the concrete design for that particular foundation that we have. Next will be, once we have finalized this, we'll be going to the precast member design and precast connection design that we have.

After that, it will be diaphragm design and robustness. This is very critical concept while working with a precast building because precast buildings are conventionally not done monolithically as usually, unlike completely cast on studio building are. So the diaphragm design, which is basically some of you might be aware of this term diaphragm design. If not, just go look it up. We'll be talking more about this into the later part of the course, which is basically how exactly the lateral force from the earthquake or wind force, when are they coming onto the structure, how they are being grounded through the walls, through the frames that are stabilizing structure.

So that is what we'll be talking about robustness is again a very critical concept while working with a precast building. It actually covers the how do we ensure our building is actually robust in terms of it can survive the progressive collapse. Like if a certain member has collapsed, can it survive, can the whole building survive by keeping the loss very minimal or located to that only geometry that is where it actually happened rather than spreading it all around the building. So that which does not lead to the entire collapse of the building.

Moving further to the next slide. So this is the intro about the precast structure, fundamentally what precast structures are. So precast structures are similar like in behavior is almost like similar as in a cast institute building, but the way of doing is different. So basically precast structures are casted earlier than transported and erected onto the site to produce the finished building structures. Whereas what happens in a conventional cast institute building? What happens is actually you have. Almost all your reinforcement brought to the site. You assemble the reinforcement and then you pour the concrete and try to develop the beam column joints, all those things.

But where is what exactly is happening in a precast structure? What exactly is happening? The element, each element, it could be beam, it could be walls. All those are casted earlier separately. So you could have multiple of like 50 beams casted where way before you start your project. And then you keep store of them and then you transport it to the site when needed. And then you erect it, assemble it and make your final project, final product as a building. So that's the basic difference that is there.

Now, although it seems very basic, but actually it increases way more challenges and way more checks that one needs to do while working with that sort of building. So that is the idea behind a precast building. I must say it is the alternate to the conventional cast institute construction, which helps enhance the product quality and reduce the time of construction. Since actually you are producing your element in a controlled environment in factory or a site based plant. So you actually gain a lot in terms of product strength, in terms of product finish.

It looks very much good and it actually is much more stronger than the element, which has been produced very at the site. So that's actually the fundamental gain that you're getting out of a precast structure. Similarly, since you have already built those multiple same looking beams or columns and then you are taking it to the site just to just assembling that there. So actually your site execution time per se gets reduced, although you have taken some time earlier to produce it, but it could be same.

Well, you like a steel, you produce a steel bolt. It's already fabricated in a factory and is being sold in the market. You just need to purchase and then put it in your building. That's it's the same way that you would have multiple beams of a certain span and certain cross section. You need it for your project. You just place it there and it's. It's working very well. It's not that simple, but as I am saying it to be, but the concept is similar that you save time there.

Further, the precast structure need not only be of concrete. It can be a mixture of steel, concrete, or some material. So you need to understand the precast structure is a concept. We are not talking about precast concrete structure per se, although course name or the name of the slide could be that, but we are not actually limited to concrete per se. The combinations that we come across, the connection, the type of connection that we come across can be multiple. It could be a precast building. It could be a precast building, but it can have multiple sections.

It can have a composite, steel, concrete section. It could have a timber section per se. But just to say for this particular course, we are limiting ourselves to concrete structures, precast concrete structures. But precast structure as a concept is not limited to something which is very related to only concrete. It can be steel, it can be timber as well. The elements are casted at site or plant and demolded, lifted, transported to site and assembled and erected. As I told you, in certain projects, just pay some attention to this site or plant.

So basically in some projects, it could happen that the elements that you have created is actually developed at site itself, which is basically a site based precast plant. There must be a two or three big projects that they have where they have multiple towers. Let's say they have 20 towers and three projects in each project. They have three projects and in each project, they have 20 towers to build like that and they can set up a plant very near to the site location. What it saves them is actually saves them the time it's going to take the element from the factory to the site.

Although there are constraints because the grain capacity that one can get at site based plant is actually lesser than the one that we have in the factory. And there are other things as well. But again, you are saving in terms of transportation. In India, you could find similar where site based plant are created just to cater for a project. Then those plants can be dismantled and transported to some other location, something like that. Then elements are demolded as once they are casted, they'll be taken off the mold that they were casted in.

And then they'll be lifted, transported to site, assembled and erected. That is the case. So assembly and erection, the difference is once the two elements are put together, they'll have to fix, have a certain sort of connection, which what's thought at time of design. So they need to have that as well. Precast elements are of better strength and finish because of their controlled production environment. As I told you earlier, like since you are in control of the water cement ratio, since you are in control of the curing process, how much curing needs to be done? Whereas in a site project, you are of no control.

I have said there is some control. It's not like it's going haywire, but at least in when you are working at a precast plant, it is very much controlled and you actually can monitor that how exactly your element is curing and how the rate of hydration is and how it is achieving the finish and the strength. So that is actually a good way of controlling. And then it in turn gives you a good finish as well as the strength. Keep going, keep going, keep going. When you look Tur束, keep going in, and let it END enter the right hand side changes down before and the lugar wall root technique, here.

Want the rest of Structural Design of Highrise Precast Buildings using ETABS?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Structural Design of Highrise Precast Buildings using ETABS course

The remaining 53 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Structural Design of Highrise Precast Buildings using ETABS course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.