← Course overviewFree lesson 1 of 3 · lesson 1 of 68Next lesson →

Unlock all 68 lessons of Structural Analysis and Design of Composite Structures using ETABSFull course ₹40,000 · paid

Price & syllabus
Free lesson · 31 min · no payment

How Tall Buildings Are Defined and Which Materials They Use

A free lesson from Skill-Lync's Structural Analysis and Design of Composite Structures using ETABS course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Structural Analysis and Design of Composite Tall Structures: Overview”

What will you learn in this free Structural Analysis and Design of Composite Structures using ETABS lesson?

The instructor opens the course roadmap, then explains how the Council on Tall Buildings and Urban Habitat defines a tall building, with thresholds of 50 meters, 14 storeys, 300 meters for super tall and 600 meters for mega tall. The lesson also compares concrete, steel, timber, precast and composite as materials for tall buildings.

  • CTBUH criteria and height thresholds for tall buildings
  • How building height is measured to the architectural top
  • Building versus tower, single function versus mixed use
  • Why composite uses steel in tension, concrete in compression

What comes after lesson 1?

The next free lesson is lesson 2, “Cost of Going Tall and the Loads Acting on Buildings” (38 min). Later in Skill-Lync's Structural Analysis and Design of Composite Structures using ETABS course (paid): lesson 4, Column and Shear Wall Functions in Structural Design; lesson 5, Structural Systems in Composite Tall Structures; lesson 6, Braced Frame Behavior. The full course has 68 lessons (29 h 11 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

We will start the recordings for the week one. Greetings to all the attendees. Here we are today to discuss further on the course of structural analysis and design of composite tall structures. Here we would cover the analysis procedure and the design methodologies for concrete, steel and thereafter the composite tall buildings. To give you an overview of what all things we will be covering during the course, we would be starting from the concepts on structural framing for tall buildings. Once the framing is understood well, we would look at the different loads which are applied on the building, basically the gravity loads and the lateral loads and their implication and application on the structure.

Next, we would move on to the modeling assumptions and the concepts and we will learn how to model the structure in ETAP software. Once the modeling is over, we would see at the analysis procedures and for that we have divided under two key categories, which is concrete structures and the steel structures. So we would go through the behavior design aspects, analysis aspects and the detailing aspects of concrete and steel structures. So once we have an overview of how the behavior of concrete and steel is, we would next move on to the composite structures.

There we would look at the basic philosophies in the analysis and the design and we will have a modeling of composite structure and then we would discuss the detailing parameters for that. So this is an overview of what all we would be covering during the course. For the first week, we would be focusing on structural systems for tall buildings. So this is part one of the portion and we will be covering the next part after that. So these are the contents will be covered during the week one, wherein we will be giving an introduction to the tall buildings, which are the 10 tallest buildings in the world as of 2020.

What are the different loadings and support conditions for building? What are the structural mechanics concepts, which needs to be clear before moving towards the analysis and design procedures? We would be also understanding the behavior of each individual structural element as in behavior of a slab, beam, column, wall and how does that impact the overall behavior of the structure? And we would also be looking at the structural systems. Basically, for the tall buildings, what should be the structural systems and their classifications? So the end of this session, I'm sure you will be able to tell what and what is the definition for the tall buildings?

When should we address a building as a tall building? What are the different materials used in the construction of the tall structures? What are the different loads which encounter on the structure? Different type of connections? Evolution of the structural systems as we had understanding of the behavior. So you would be able to comprehend all these items once you complete the week one of this course. Starting with the key introduction is India, as you all are aware, is having a population count of close to 135 crore.

That would have increased to probably maybe 138 crore by now. This was based on the 2019 census. And our population density is close to 419.8 per square kilometer means 400 to 500 people are staying per square kilometer area of land. This being said, if you take an estimate from the world's statistical data, our population would be close to 163 to 170 crore as we move from 2021 to 2050. And that's definitely huge increase in the population. Along with that, we can see that the population at the bottom graph, we can see that the population is migrating from the rural to the urban.

And that migration is taking place continuously. And because of that migration, there would be need and requirements for the land to be very scarce as well as there would be need for structures to be taller. And as we have a scarcity of land across India, there would be definitely no option rather than to go and build tall buildings. So India has already been progressing in this direction. We have a lot of tall structures coming up. And by the next decade from 2020 to 2030, you will be able to see significant number of structures as tall structures in India.

And specifically in the locations and the regions and the cities where the population density is huge. So if I just specify a number, this is the average population density for India. Now that of Kolkata is close to 800 people per square meter. Now that 800 is almost double of this value. And you will be able to see the cities like Mumbai, Delhi, Chennai would be those wherein we would be able to see a lot many tall structures coming up. And with tall structures, we have seen that the composite using the composite in the tall structures is definitely a best which we can do.

And is the best available resource to make that in the optimum prices. So over the new course, we would see how the behavior is of the composite. We would understand why we go for the composite and not for the traditional concrete and steel. And we would understand in a better sense. So starting with the first thing, like we all say that we are studying a course on tall buildings. But what do we mean by tall buildings? So when to call a building is a tall building.

Now you may say for you, it may be 50 meters of height as a tall building. For the other person, it may be 100 meter. So there is no certain way in which there is criteria in which we say that this building can be considered as a tall building. So to clear out all this type of confusions, there is an international body, which is an arbitrar for considering any building as a tall building. So the body name is Council on Tall Buildings and Urban Habitat, CTBUH, established in 1969 by Lynn Biedel.

And the core competency of this body is it has laid out certain criteria. And if a building falls under those criteria, it can be considered as a tall building. And it keeps a registry of all the building across the world and which buildings to be considered as a tall building. So as per CTBUH, there is also not an absolute definition qualitative parameter directly, which can see and say that this is so it also says that there are few criteria basically, because the sub definition is subjective.

So it says that any one of the following criteria can be used to for the assessment of a building as a tall building. So just to share the criteria for that first criteria laid out is the height relative to the context. So if you see a building which is close to 20 storey high in a region where all of the buildings are close to 15 storey or 10 storey high, then you may think that that building is a tall building or else on the other case that can be a 100 meter tall structure in a region where all other structures located near that would be close to 200 or 300 meters.

And should we call that building as a tall building? So that is one aspect to it, according to the location and the region wherein it is located. So the height relative to the context. Next is the proportion of it. So we see that some buildings have very small footprint area and very high in the height, total height. So definitely they look slender. So if we have a very short footprint, long height, slender structure, should that building be called as a tall building? Or else on the other hand, we do have buildings having huge footprint area and the height is also significantly higher.

And should we call that as a tall building? So that is based on the proportion aspect of it. And the third is the embracing technology, which means the vertical transport technology used inside the buildings. And if I say by the vertical transport technology, I mean here is on the basis of vertical lifts basically used for the transportation, the elevators used in the building. So if we have a high efficient vertical system transit used inside the building, do we consider Consider that building as a tall. So all these are key constitutes of a subjective definition and thereby CTBUH recommends fair bit of qualitative parameters wherein you can easily assess that during such type of cases, what should you consider basically.

So as per CTBUH, the guideline is if a building is having number of stories greater than 14 or if the building height is greater than 50 meters or is close to 165 feet, we can consider that building as a tall building. So it has laid a threshold. So this is a threshold and then there can be a subjective definition which I discussed earlier. So based on that, you need to decide whether a building is a tall building or not. Now when I speak about the height, there are always challenges associated with it. So what height do we take up? Like some structures have a pole on the top of it, some telecommunication tower on the top of it.

Some structures have a lot many basements. So what height are you talking about? So CTBUH lays down the guidelines for considering the height and they say that the height should be measured from the lowest open air entrance. So lowest open air entrance means the ground flow. So you should not be considering the basements to the height to the architectural top and architectural top excluding any antennas, signage or flagpole. So this is one way it measures the height. So there are three other ways also. So one is height to the architectural top, the one which we discussed right now.

There is another criteria which is height to the highest occupied floor. So the highest occupied floor can be 100 floor and above 100 there can be a tower or something. So we won't be considering those. So that is the criteria. And the third criteria is height to the tip of the structure. Now this tip can be anything can be an antenna can be a signage or a flagpole. So it has three different type of classification for the height. And similarly, it has three different type of consideration of classification of structures based on all these three type of height criteria.

So if you see the type one, which is the most considered or most accepted one is the height to architectural top, which I just mentioned over here. So for this criteria, there are 10 structures meeting this criteria and there would be classification of those 10 structures in the top 10 buildings in the world. Similarly, if you consider a criteria of height to the highest occupied, there would be another 10 structures may be same, may not be same considering the criteria. But the usual, but the usual, what we speak about and we consider is this one, the height to the architectural top.

So just to brief you, like if the height is greater than 50 meters, we definitely call it as a tall structure, tall building, number of store is greater than 14 again as a tall building and height measured from ground to the height of the architectural top, excluding antennas. So if the height is greater than 300 meters, we go for super tall and height is greater than 600 meters, we go for mega tall. So this is within the classification, so this is within the classification, which is greater than 50.

So if a height is 200 meters, definitely what we call, we call it as a tall structure from 50 to 300, we call it tall from 300 to 600, we call it super tall and above 600, we call it mega tall. So this is the criteria, so this is the criteria, which has been laid out by CTBUH and based on this, we specify any building across the globe. And if you see just for an example, I have shown, if you see Burj Khalifa, Burj Khalifa is having a height close to 828 meters.

And if you see it clearly is above the 600 mark, which is somewhere here, and that's why it is called as a mega tall structure. Similarly, Shanghai Tower over here is again considered as a mega tall structure. Abridge Albeit, again this is building, which is close to 600 meters, but if you see there is a signage or pole up, which is governing that part. So considering that part in the picture, we don't consider that in our height calculations, this falls in the super tall structure and not a mega tall structure.

So as of now, like as we speak of today, there are close to 115 super tall buildings across the world. So 115 super tall buildings, meaning height greater than 600 meters and lesser than height greater than 300 meters and lesser than 600 meters. So you can see very, very small number of buildings are falling into the mega tall category. But as we move forward in the next decade, I'm definitely sure we will be addressing that number in the double digits. Considering many of the towers are currently in the construction.

So if you talk about Kingdom Tower, it's close to one kilometer, which is 1000 meters. So once that gets constructed, it will be coming higher than Burj Khalifa itself. So as we move forward to the next decade, we'll definitely see a lot, many mega tall buildings coming into the picture. Now, there is one more classification as in you would have usually or casually used the word tower. So when to call it as a building and when to call it as a tower. So CTVH also lays out a guideline for that.

So if 50% or more of the height is occupiable, like if there is occupancy in 50% or more height of the structure, then definitely it is called as a building. But if we don't meet that 50% mark, then it's definitely called as a tower. So if you see Oriental Port Tower, it's called a tower in Shanghai and not a building. Again, it's a tall structure, but it's not a building. It's a tower. And that criteria is like 50% occupancy or more should be required. Similarly, there is single function versus mixed use.

So you may have observed that the top 15 stories would be hotel, whereas the bottom 50 stories can be office building, right? So in such type of scenarios, we can call it as a single function only if 85% or more are dedicated to a single function. So this is the classification between single function and the mixed use. So if more than 85% of the building function is of similar type, like if more than 85% is of office building, then definitely it should be called as an office building single function.

But if it's like 50% is hotel and 50% is offices, then it's some mixed use building. So if it has a tagline saying hotel slash office building, so hotel slash office building means the hotel function is above the office function. So the one which we specified the first, the hotel slash office. So the top stories will be the hotel and the bottom stories will be the office. So this is how we classify single function versus mixed use type of buildings. Moving forward, we will see which are the top towers or top buildings across the globe based on the height criteria laid out by CTVUH.

So if you look, Burj Khalifa is the one which is like at present the tallest tower in the world with height close to 828 meters. In 2010, it got constructed Kongshao TV and lightning sightseeing tower is in 2010 construction. CN tower in Toronto again, these are all towers. You see tower rather than a building here. Similarly, there's a world trade center constructed in 2013, the one world trade center. So if you just see from this, we have close to many of the structures now coming up in Asia, considering the Kuala Lumpur, Hong Kong, Shanghai, Taipei.

Whereas usually it used to be the case that North America used to govern like New York, Chicago. You can see Chicago here, John Hancock Tower is here. Again, the world world trade center. So over the period of time, this has changed. We have now seen more tall towers in Asia. And to support that hypothesis, I will share you a few numbers as well as I move forward in the presentation. So if you look at the 10 tallest buildings in 2020, so these are buildings and not towers.

So initially that in the previous slide included both buildings and towers. This includes only the buildings into the considerations. So if you see Burj Khalifa, as I said, 828 meters in UA tallest, then comes the shant. Shanghai Towers, basically again height greater than 600 meters, Abraiz Albaith, Taipei 101, again Taipei is in Japan, Shanghai World Financial Center in Shanghai that's close to 500 meters, then International Commerce Center close to 500 meters, Petronas Tower, again famous in Kuala Lumpur, which is in Malaysia that is close to 450 meters, and similarly we have this.

So CTVUH recognizes them, and these are the tall towers basically across the world, and now your question would be, why don't we see any of them from India, and as I say, by the next decade you will be able to see one of the entry coming from India as well. We have been developing with our technologies, construction technologies, and understanding of behavior, and it would be soon that we would be seeing one of the tall towers in this list from India as well. So just to give you a pace at which this can happen, if you may think that we don't have any, that doesn't mean we won't be having any tall towers in the next few years.

So just to give you a pace of how fast a construction can take place, this is the previous image of UAE, like just close to 15 to 20 years ago, there has to be like minuscule, maybe one or two tall towers in UAE, rest all were like four storey, five storey buildings. And if you see the current scenario, it's close to 15 years of development, and you would see this is the skyline of Dubai. So, and all these towers, you can see Burj Khalifa over there, 828, this all small towers may seem small.

These are all close to 300 to 200 meters tall. So, again, they all fall in the tall, but few of them may fall in the super tall, and definitely Burj Khalifa being under the mega tall structure. So, the pace is quite fast, and similarly, we will be seeing that in India as well, within the next decade, we will be able to see lot many tall structures. Now, coming to the materials used for this type of tall buildings, you may see like reinforced concrete is the traditional material which was used.

Now, for this type of tall structures, there are a lot many research done in the case of reinforced concrete. It has been initially used to come under the strength of 30 megapascal. Now, we have a high strength concrete coming in the range of 80 to 90 megapascal. So, there has been a lot of research in the concrete as well over the period of time. Now, we were able to see high strength concrete in our market, and that's why we can see the use of traditional concrete in the tall structures.

The second traditional material used was structural steel. Again, considering the steel as a higher strength than the concrete, it is always preferred as a building material in case of tall structures. With again, the research and development within the steel, we are now able to achieve even higher grades of steel, even higher level of ductility, and thereby they are further used in the tall buildings. Next comes is the laminated timber. You would be able to see this type of structures in the Canada, US, New Zealand regions wherein there is availability of timber in large amount.

And also in India, we would be able to see timber type of structures in Assam, Meghalaya, the regions wherein timber is easily available basically. So, laminated timber, again, it has a good characteristics because of being a sustainable material, concrete do tend to give out large amount of carbon emissions. Thereby, as we move towards the sustainability, and if we want to address the challenge of climate change, we are slowly looking into the fact of laminated timber. But again, this is usually governed by the availability of the timber in that location, the wood basically.

And if we have the availability of wood, we definitely try to see that for a sustainable building, we have our construction material as a timber. So, timber is again a material which is used. Then comes the precast concrete. Now, this is a word which is very upcoming, which is precast. Most of you would have heard about this. Precast buildings are similar to the concrete buildings, just that the casting would not take place at the site. The casting would take place somewhere in the lab. There it would be casted and then after the curing part is completed, it would be brought directly to the site and then assembled.

So, the same way we assemble a jigsaw puzzle, we have to assemble our structure. We would have heard about buildings getting constructed, tall buildings getting constructed within two months or within like 20 days of span. And similar in China, where in hospital building got constructed in 15 days. Now, to achieve such type of pace in construction, you have to look at the precast concrete. Considering this all is made off site and just brought on site and assembled. So, this is definitely the next thing which we will be going to see in our era is the dominance of the precast concrete over the normal reinforced concrete.

And the next one is the composite. Now, as the word says, composite is the mixture of steel, concrete, precast and all. So, we have a lot many composite structures. Now, what is the idea behind getting composite is concrete, as you all know, is strong in compression, but very weak in tension, whereas the steel being very good in tension and it buckles in compression. So, both of them don't have the identical set of parameters. One is good in compression, which is concrete and steel is again bad in compression.

Whereas, concrete is weak in tension and steel is very good in tension. So, to just get the best of each of them, like if we have a material, which is very good in compression as well and tension. So, what we do is we use the composite, which is a mixture of both steel and concrete. We use structural steel at the locations where we have tension coming on and we use concrete at the locations where we have the compression. So, we have a mixture of both of them, we formalize the material, that's a composite and then we use it.

That gives us the best of both and thereby we can say that we can reduce the overall material required. We can reduce the overall size of the members considering the efficiency has increased now and thereby the composite materials are used in the industry. Next is the mixed use. So, again, if you use some portion of your building as a composite, some as a structural steel, some as a concrete and some as a precast. So, you can use all this in some of the other levels. Basically, there are structures like to keep weight of the structure light.

The top store is maybe of steel. But because the load is higher at the bottom levels of the structure, we keep composite structures at the bottom. So, that can be a mixture of any of these two or three components and thereby we occur as a mixed use material specifically. To just give you an idea about how many of the building stock is under concrete or the composite. So, you can see close to 54% is in concrete that is close to half of the building universe, tall building universe across the world is in concrete.

This includes both precast as well as cast in-situ concrete. But to your amazement, you can see the next half is not from the steel, rather it is from the composites, right? So, as I said, composites have been developed lately. They are still under research. Their behavior and assessment of their behavior to the exec is still under process. But as and when we understand that material, in a better sense, we are using it into our benefit. And that is already being started. Close to 38% of the structures are now in the composite.

Tall structures, I mean. And only the 5% are there in steel, considering steel being costly, we definitely use steel in a much lesser way. And you can see 0.8% are the mixed use development. And to show you the evolution process of how that has taken place. So, if you see the red mark is from the North America. So, up till 1930, all the tall, 100 tallest buildings were in the Northern America. But as we moved from 1930 to 1960, Europe started picking up. Europe had now close to 6 again, only mega percent in terms of total number of buildings.

But Europe started building up. And as we see in close to 1980 is where Asia started. And there from Asia never looked back. And it is now dominating the sector with close to 59 of the 100 tall buildings in Asia. Middle East has also started its journey from 2000, which is this 21st century. And it is also going at a great pace. So, if you see from 2010 to 2018. Close to 23 buildings which are there in Middle East, 60 buildings basically in Asia, to be exact 59, and now only 14 buildings come into the range of North America.

So that has been a significant shift, and as I said, by the next decade, by 2028, you would see Asia and Middle East dominating this. You would only see a mere percentage in North America and other regions. That is why it is very important to study about both the concrete, because now concrete is there. Definitely what I see from the evolution is this composites will be the governing ones as we move ahead in this century.

Want the rest of Structural Analysis and Design of Composite Structures using ETABS?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Structural Analysis and Design of Composite Structures using ETABS course

The remaining 65 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Structural Analysis and Design of Composite Structures using ETABS course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.