Free · 3 lessons · no paymentStructural Analysis and Design of Composite Structures using ETABS: 3 free lessons
Three free lessons from Skill-Lync's Structural Analysis and Design of Composite Structures using ETABS course. They cover how tall buildings are defined and classified, why composite construction is used, and how dead, live, wind and seismic loads act on a structure. They also follow the load path from slab to soil and the behaviour of slabs and beams. These free lessons are conceptual; ETABS modelling starts later in the course.
Last updated 16 Nov 2026 · 3 free lessons (1 h 30 min) · full course: 68 lessons (29 h 11 min), paid · ₹40,000
Free lesson 1 · 31 minHow Tall Buildings Are Defined and Which Materials They UseWhat will you learn in the free Structural Analysis and Design of Composite Structures using ETABS lessons?
- How tall, super tall and mega tall buildings are classified
- Why composite combines steel tension with concrete compression
- Differences between dead, live, wind and seismic loads
- How loads travel from slab to foundation and soil
Free lessons you can watch now
Lesson 1 · 31 minHow Tall Buildings Are Defined and Which Materials They UseThe instructor opens the course roadmap, then explains how the Council on Tall Buildings and Urban Habitat defines a tall building, with thresholds of 50 meters, 14 storeys, 300 meters for super tall and 600 meters for mega tall. The lesson also compares concrete, steel, timber, precast and composite as materials for tall buildings.
Lesson 2 · 38 minCost of Going Tall and the Loads Acting on BuildingsThe instructor shows how unit cost rises faster than height once wind and earthquake loads are included, then separates dead, live and environmental loads. The lesson contrasts wind as a direct pressure on the facade with seismic force induced by mass, and ends with internal axial and bending forces and pin, fixed and roller supports.
Lesson 3 · 22 minLoad Path from Slab to Soil and Behaviour of Slabs and BeamsThe instructor traces gravity load from slab to beam, column, pile cap, pile and soil, and explains the pressure bulb used to decide soil investigation depth. The lesson then describes slab behaviour as shell, plate or membrane, and classifies beams as simply supported, continuous, cantilever and propped cantilever.
Which lessons of Structural Analysis and Design of Composite Structures using ETABS are free?
The first 3 lessons are free on Grow by Skill-Lync: 1 h 30 min of video from Skill-Lync's Structural Analysis and Design of Composite Structures using ETABS course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 65 lessons are listed in the outline below so you can see what each one covers.
How long is the Structural Analysis and Design of Composite Structures using ETABS course?
The full course has 68 lessons and 29 h 11 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 1 h 30 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid Structural Analysis and Design of Composite Structures using ETABS course on Skill-Lync, with mentor support and a certificate. For a career in Civil & structural, the Post Graduate Program in High-Rise Building Design & Analysis goes further with industry projects and placement support.