Lesson finished
Unlock all 54 lessons of Mastering Shear Force and Bending Moment DiagramsFull course ₹40,000 · paid
Introduction to Beams: Loads, Beam Types and Supports
A free lesson from Skill-Lync's Mastering Shear Force and Bending Moment Diagrams course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Introduction to Beams in Structural Engineering”
What will you learn in this free Mastering Shear Force and Bending Moment Diagrams lesson?
The instructor defines a beam as a member carrying transverse loads and lists concentrated, uniformly distributed, linearly varying and moment loads. The lesson classifies beams by static determinacy, supports and number of spans, then explains pinned, roller and fixed supports, flexible supports and internal hinges.
- Concentrated, distributed and varying beam loads
- Statically determinate versus indeterminate beams
- Simply supported, cantilever and propped beams
- Pinned, roller and fixed support reactions
What comes after lesson 3?
Later in Skill-Lync's Mastering Shear Force and Bending Moment Diagrams course (paid): lesson 4, Mastering Bending Moment and Shear Force Diagrams; lesson 5, Bending Moment and Shear Force Analysis in Beams; lesson 6, Analysis of a Simply Supported Beam with Triangular Loading. The full course has 54 lessons (27 h 10 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
So, after we are done with all of the equilibrium equations, be it static or dynamic, now let's move on to the different types of elements that we look at. So, the first one is beams. So, beams is a very, very common structural element that we deal with in real-life structures. So, let's take a look at how beams behave. So, just an introduction to beams. So, beams are basically structural members that are primarily subjected to loads perpendicular to its longitudinal axis, and that's also known as a transverse load, and they are actually supported at discrete locations or discrete points.
So, just to recap, beams are nothing but structural members which are primarily subjected to transverse loading. So, that means the loading which is perpendicular to the longitudinal axis of the beam. Now, there are various types of loading that we typically deal with on beams. Like, this could be a concentrated force at discrete points. So, concentrated force is basically any force, say, 20 kN or 30 kN, which is acting at a discrete location on the beam. The second type of loading could be a uniformly distributed load. Say, it's a loading intensity and not really acting at a discrete point, but it's widespread along the length. So, that is basically having, say, a loading intensity of 10 kN per meter, for example.
The third could be a linearly varying load, wherein the loading intensity is varying from, say, 0 kN per meter at one location. It varies linearly to, say, 5 kN per meter across a span of 10 meter. So, that's like a linearly varying load. And then there are, like, various other forms of transverse loading as well that acts on the beams, which could be of more generic in nature. I mean, it could be a trapezoidal. It could be of different other shapes as well, as the case may be.
And then a beam could also be subjected to a concentrated moment. So, this one was the concentrated force at discrete points was more of a translational force in nature. And then the concentrated moment is, like, a couple or a moment acting at some discrete location. And then lastly, there could be a beam which is subjected to a combination of these different types of beam loading here. So, the thing is, like, since the beam is an element which is loaded in a transverse direction, so due to application of those loads, the beam actually deforms in the form of bending.
So, the beam always has to deform under bending. So, I mean, for example, when we had looked at the stress-strain curve for a bar in tension, in that case, the bar was actually deforming actually because the load applied was actual. But in case of beam, they are primarily a flexural member or it kind of flexes due to the transverse load acting on that beam. Also, just to continue with the interaction, so from a dimensional perspective, the longitudinal direction or the longitudinal dimension of the member is considered more compared to the cross-sectional dimension.
So, for example, so the intent over here is to say is the longitudinal dimension of that member is much high compared to the other two dimensions. Say, so a beam would be more of the form of, say, if your beam is having a length of 5 meter, so that is the longitudinal dimension. The other two dimensions would be, say, 400 mm or 500 mm. So, it's of that sort. So, like the length of the beam is very, very prominent compared to the cross-sectional area. And therefore, for our analysis purposes and all, we actually consider beams as a line element.
Also, like due to deformation, what happens is, so whenever you have a load applied and then that point moves, in that case, there is some work done by that applied force, right? So, that applied force does some work and that force and that work actually, which is done by the external force helps, I mean, that results in deformation of the beams. And the beam, when deforms, it actually develops strain because it is deforming. And due to this strain and stress, which is developed in the beams, there is energy which develops inside the beam.
So, that is known as strain energy. And then for all practical purposes, what is done is, like, whatever work was done by the external load applied, that is equal to the strain energy which is stored in the beam, unless there is some energy loss happens. For example, if you had an external load applied on a beam and then, for some reason, there is some energy lost to the environment, so whatever remains is actually stored as strain energy in the beam. And then, as I mentioned before, in ideal case, when there is no loss of work done by external force, the strain energy stored in the beam is equal to the work done.
So, now, let's look at some of the different types of loading in a more graphical way. So, this is, we have, like, different types of beams over here with different kinds of loading. So, we'll be just going over the different types of loading one by one. So, this one is our first beam over here. So, this horizontal line that we see is the beam. And then, this triangle here and the circle here are indicating the support locations. So, as we had mentioned before in the definition of beam is that a beam is an element which is supported at discrete locations.
So, that's what is indicated here. Like, this beam is not really supported with a continuous support or something all along the length, but it is just supported at some discrete points. So, in this case, like, we are seeing the supports located at the ends of the beam. Now, this is a uniformly distributed load wherein the load is acting along the entire length of the beam. And that could be, and that's typically expressed in loading intensity. So, this could be, say, a 5 kN per meter loading or a 10 kN per meter loading.
The second could be a system of concentrated force. So, if you see here, in this case, like, we have loading acting on the beam at some discrete locations. So, it's not really widespread along the entire length of the beam, but then it's just acting at some discrete locations. So, these are known as concentrated loads. The third would be a linearly distributed load. So, if we see here, like, we have, like, we have shown two different types of linearly varying load. One wherein the load is acting, I mean, the load is varying from zero, say, at one support to, say, whatever number at the other support.
So, this is just one constant rate of increase of the loading intensity. And the other is wherein the load intensity actually, say, increases from zero, and then it reaches a maximum. And then beyond that, it goes back to zero again to the other support. So, and these are, like, different kind of real-life loading that we see on our real-life structures. And, for example, if you had a slab which was spanning one way, in that case, the beam would actually see a uniform distributed load on the beam from the slab.
And then, if you had, say, a bunch of beams framing into a girder, so, in that case, you are seeing different reactions from those infill beams, which are acting as point loads on this girder. So, these are those different magnitudes of those reactions that those infill beams are trying to transfer to these, the supporting girder. So, this is another real-life scenario which could easily happen if you have a girder wherein you have a bunch of different infill beams and they have different loading, and therefore, you are seeing different reactions over here.
But, at the same time, they are at very discrete locations. This is a third type of loading, which is, like, a linearly distributed load. So, this kind of loading you could actually see in a retaining wall wherein we will see that the pressure on the retaining wall actually increases or, yeah, changes linearly as we move from top to bottom. So, this is also a very real-life type loading that we typically work with. And then, we could also see this beam here, which is subjected to, like, a linearly varying load.
But then, here, the load actually increases to a certain value, and then, beyond that, it dies down to zero. So, this is something which happens in a two-way span system. Like, if you have a slab, which is supported on, supports on four sides. So, if you have a two-way slab system, which we will be discussing later, in that case, we will see this kind of loading diagram as well on some of the supporting beams. And then, also, there could be locations that we mentioned, like, wherein we could have beams subjected to concentrated moments.
So, these are those points wherein we are seeing concentrated moments acting on the beam. And then, lastly, just some kind of a generalized loading. I mean, this could be of any form, but this is just for illustration purpose. Like, there is no proper geometry to it. But then, this could always be simplified to a more mathematical form just from ease of calculation perspective. So, these are the different kind of loading we typically deal with when we have beams. Now, let's look at some of the types of beams which are very common.
So, as we mentioned, there are various types of beams, and the basis of those differences could be different. I mean, for example, the first basis here is based on, say, static indeterminacy. So, beam could be statically determinate or a statically indeterminate structure. I mean, we will get more into a detailed explanation of what this means. But then, as of now, what we could say is a statically determinate beam would be one wherein the beam is supported in such a way that only equilibrium equations is sufficient enough to analyze the beam completely.
But then, if you have a statically indeterminate structure, in that case, just equilibrium equations is not sufficient for complete analysis of the beam. And therefore, some more equations are required. In other words, like, in a statically indeterminate structure, like, there is a lot of supports or the beam is supported a lot more compared to a statically indeterminate structure. So, therefore, you have a lot of redundancy in the system. So, even if you lose one support or a few supports, rather, in a statically indeterminate structure, as long as the beam is stable, there should not be an issue.
The second basis of classification of types of beam could be based on supporting conditions. So, we have listed four of them here. So, one is a simply supported beam. So, simply supported beam is the most simplest form of beam. Wherein you could have a pin support at one end and roller support on the other end. So that's known as a simple supported beam. The other one would be a cantilever beam. So a cantilever beam is one wherein one end of the beam is fully fixed. So that's the translational and the rotational restraints are fully locked. But the other end is completely free. So that is known as a cantilever beam.
The third type is a probed cantilever. So a probed cantilever beam is one which is fixed on one end. But then the other end of the beam is either having a roller support or a pinned support. So that's what a probed cantilever is. And lastly, we could have beams with overhang wherein we could have beams which is going past the support. But then that's kind of overhanging from that support. So there is no support beyond that, the intermediate support. We'll look at some of these different types of beams more in detail in the later slides.
Also, based on the number of spans that the beams have, we could also have a single span beam wherein the beam is supported only at the two ends. So that's like one single span of the beam. The second could be, say, a two span beam wherein we have a long beam which is supported at three discrete points. And therefore, that divides the entire beam into two spans or two zones between each support. So that's where a two span beam comes in picture. And then we could have a three span beam or a multiple span beam depending on the number of supports that the beam is having.
And also, there could be beams with flexible support. So basically, those are the supports which kind of yield or settle. And we'll be getting into a more detailed analysis of those kind of supports in the coming weeks. But these are some of the different types of beams that we typically have. And now let's take a look at some of them. So this one is types of beams based on static indeterminacy. So a beam is set to be statically determinate when equilibrium equations sufficient are sufficient to analyze the beam completely.
So as I mentioned, like if you have, say, a beam and then so for a beam, for example, the equilibrium equation that we have is the summation of all translational force has to be zero. And then the summation of all moments have to be zero. So that means at any point, the net moment or net force has to be zero. So if you consider, say, a simply supported beam here. So these are these various examples of statically determinate beams. So say you have a simply supported beam here and then there's some transverse loading acting on this beam.
In that case, there'll be vertical reactions developed over here. So those vertical reactions could be easily determined based on only the equilibrium equations. Similarly, if you have a cantilever beam, even that is a statically determinate structure wherein whatever external load is applied, the reactions on this support could be easily calculated based on just moment equilibrium or force equilibrium or combination of both. The third could be, say, if you have a probed cantilever beam, but then there's an internal hinge here. So in that case, this is also a statically determinate structure because if there's an internal hinge, as we know, the internal hinge is basically a point wherein the bending moment of the structure is zero.
So in that case, what's happening is like in this structure, even though we have like a fixed support here and then a roller support here. But due to presence of this internal hinge, we know that at this point the bending moment is zero. So that gives us additional equation. And therefore, that helps us in, you know, solving this entire or analyzing this entire beam. And that makes it statically determinate. And the last example here is a two span beam with again internal hinge. So if we had a two span beam here, but then there was no internal hinge here, for example, in that case, this would become a two span beam and that will be statically indeterminate because only equilibrium equations won't be sufficient to determine the vertical reaction that you support.
But since we also have this internal hinge here, so that is given that additional equation, which is bending moment at that point is equal to zero. And therefore, that makes this also statically determinate. Now, next is the statically indeterminate beams. So as we mentioned before, like a statically indeterminate beam is the one wherein just equilibrium equations is not sufficient to solve or analyze the entire beam. And therefore, some more like additional equations, which could be deformation compatibility equations, or it could be some other equilibrium equations that is required to just get the support reactions completely.
So there are a few common examples of statically indeterminate beam as well. So a very common being say a fixed beam wherein you have a single span beam, which is supported on both ends by fixed ends. So on this beam, if you were to analyze. So what happens is like on this support, you will have vertical reactions and also moment reactions. We'll be getting a more into detail into the different types of supports. But then for now, we can just consider like if so, there are like four supports.
I mean, four reactions here. Like one is the vertical reaction on this side. The other would be a moment. Similarly, a vertical reaction on this and then a vertical and then a vertical moment as well. So since we have four supports support, support, support reactions, but then the total number of equations or the equilibrium equation that we have is only two. One is a summation of translational forces zero and the other would be summation of moment is zero. So therefore, only two equations is not sufficient to determine four unknowns.
And that is why this beam is statically indeterminate. Similarly, the other common example of a statically indeterminate beam is a probed cantilever beam where in one end is fixed. The other is a roller. And then when we look at the other types, though, if you have a two span beam or a three span beam or maybe multiple span beam, even in those cases, like just the equilibrium equations are not sufficient enough for us to analyze the entire beam completely. So these were some of the common statically indeterminate beams.
Now let's look at the types of beams based on supports. So as we mentioned, like the first one being a single span beam, which is basically just this beam is just one span beam. Right. So that's where it's a single span beam with pin support at one end and a roller support at the other end. So this is known as a simply supported beam wherein one end is pinned and the other is a roller support. So this is a simple support beam. The next one is a cantilever beam wherein we have one end of the beam which is fully fixed and the other end is completely free.
So that is a cantilever beam. Then we have a probed cantilever beam wherein one end of the beam is fully fixed and the other end of the beam is either a roller or a pinned support. Then the other would be a beam with overhang. So an overhang, as we mentioned before, is basically some portion of the beam which kind of extends past the support. So in this case, if you look at this beam, so this is like a probed cantilever beam with overhang wherein one end of the beam is fixed.
And then we have a roller support here and the beam extends past that support. So this portion of the beam which is beyond this support is known as a overhang. And then we could have something similar, say, for a simply supported beam with overhang on both sides wherein what we see is like the beam actually extends beyond this point. And then similarly, the beam beyond extends beyond the support as well. So that is simply supported beam with overhang. Now, when we look at the types of beams based on number of spans.
So there are these few different types of very common single span beams wherein one is a fixed free beam or a cantilever beam wherein we just have one span. The second would be we have a probed cantilever with overhang. So one end of the beam is fixed, the other is a roller, and then beyond that there is an overhang. So we typically don't count on the overhang as a span. So therefore, this is still qualifying as a single span beam. The other would obviously be a simply supported beam wherein you just have one span of beam supported on these two supports.
And then lastly, we will have a fixed beam which is a beam which is having fixed support at both ends. So this is all of these are examples of single span beams. Now, let's look at some of the examples of two span beams or two span beam would be obviously having three supports because those three supports are breaking this entire length of the beam into two different spans. So this is span one. This is span two. So this is one common example of two span beam.
Similarly, they are very much similar like these two beams. But just that this roller support is replaced with a fixed support here. So there are these examples of two span beams here. Then if we look at a three span beam support, so we have four support locations over here. And then so in this entire length of the beam is divided into three segments by these four supports. So each of these segment is forming one span. So therefore, we have three spans in total. And similarly over here as well wherein you have three roller supports and one fixed support.
And that is forming this three span beam. Now, as we mentioned, like beams could also have flexible supports, which means like due to loading, the supports actually move or yield. So they have some finite stiffness, those supports. So it's not that this point is not moving at all. For example, if you look at this beam over here, so this is a two span beam. So this one is a pinned support. This one is a roller support. But then here we are showing a spring, a translational spring.
So this point is going to undergo zero vertical deformation. Same is the case over here. But then at this location here, since it's a spring, there will be some finite deformation here, which is equal to the compression or tension of the spring as the case may be. So this is a support, but it has finite stiffness. Whereas these supports here actually have . So that is why they are known as flexible supports. Similarly, if you consider this beam over here, so this point is a pinned support.
So therefore, there is infinite stiffness in the translational degree of freedom. But then if you look at these points here, so there is a rotational spring which is shown by this spiral curve. So that's a rotational spring. So this point is actually is going to undergo some rotational deformation. And then the moment resistance of that support is actually equal to is imparted by this rotational spring. And then we also have a translational spring here. And then in this case, we just have a vertical spring. So what it's showing over here is basically different combinations of flexible supports.
Like for example, here it was purely a translational spring. Here it was a combination of both translational as well as a rotational spring. And then here it's purely a rotational spring. So like in this case here, there is no translational restraint at all. There will not be any translational moment, no translational reaction. Similarly, in this case, at this support, there will not be any rotational reaction, but there will be only vertical reaction. But then there will be vertical settlement as well. And then in this case, whatever rotation over here is, there will be some moment developed at this point because of this support here, which is rotational in nature.
All right. Now, let's look at different types of supports that we have, and they're very, very common types of supports. So the first one is a pinned support. So when we say that a beam is having a pinned support, what does that exactly mean? So what that means is at that point, all the translational degrees of freedom of that point is locked. So what that means is if you had a beam which had a pinned support, that point cannot translate in any direction, be it global X, be it global Y, be it global Z, or any other coordinate system for that matter.
This point cannot translate. So that's what a pinned support means. Next is a roller support. So a roller support is similar to a pinned support, but in case of a pinned support, all of the translational degrees of freedom are locked. But in case of a roller support, only one translational degree of freedom will be locked. The others would be free. So for example, if you had a beam which is having a roller support, it's oriented this way. So in that case, only the vertical degree of freedom of the translational is locked, but this could still move in, say, global X direction or in an open of paper.
So it's free to move in that direction, and therefore it does not restrain that movement. It's only the vertical direction in Y direction which is locked, and therefore it produces reactions only in Y direction. Like if we look at the previous slides, in that case, since all of these three translational degrees of freedom are locked, in that case, the reactions that this support provides is only translational in those three directions. If we move on to the roller support, in that case, this support produces a reaction only in the vertical degree of freedom direction because only that restraint is locked.
Similarly, if we move on to a fixed end, so a fixed support is one wherein all the six degrees of freedom of that point are locked. So the six degrees of freedom over there are three rotational, like rotation about X axis, rotation about Y axis, and rotation about Z axis. And then the translational degree of freedom, which are translation along X, translation along Y, and translation along Z. So all of these six degrees of freedom are locked for that point, and therefore this support produces these corresponding reaction forces, which is Rx, which is a translational force, Ry, which is another translational force, and then Rz, which is the third translational force.
And then also the movement reactions Mx, My, and Mz, because all of the rotational degree of freedom are also restrained. Now, internal hinge, internal hinge is not really a support, but it's more of an intermediate point wherein it's basically a node or a joint in the span, which can only transfer translational force across it, but not rotational forces. So it's not really a boundary condition that way. All right, so just to summarize what we learned in week one. So in this week, we learned about the basic concepts of stress and strain, including Hooke's law, and then some of the stress-strain behavior of very commonly used materials like steel and concrete.
And then secondly, we talked about equilibrium, and then its types, and some of the governing equations wherein we looked at the different types of equilibrium. The definition of equilibrium, like a definition of equilibrium is basically a body has to have no net unbalanced force on it. And then also there were different types of equilibrium we looked at, which was stable equilibrium, neutral equilibrium, and unstable equilibrium. And then what are the desired types of equilibrium? And then lastly, we also looked at some of the equations which we get for equilibrium, like the summation of the net translation force has to be zero, the summation of moments has to be zero, and the summation of all the torsion has to be zero.
And then we also looked at beams and its various types, like what are beams? Beams are basically members which are transversely loaded, and then they have one dimension very, very prominent compared to the other two. So they have very high spans compared to the cross-sectional dimensions. And then we also looked at different types of beams, which was based on the number of spans, based on the statical indeterminacy, based on the support condition, whether it's a fixed condition or a pinned conditions, and that. And then we also looked at some of the different types of supports.
In the next week, like week two, we'll be talking more about some of these concepts. So thank you.