← Previous lessonFree lesson 2 of 3 · lesson 2 of 54Next lesson →

Unlock all 54 lessons of Mastering Shear Force and Bending Moment DiagramsFull course ₹40,000 · paid

Price & syllabus
Free lesson · 30 min · no payment

Idealized Steel and Concrete Curves, Equilibrium and Its Types

A free lesson from Skill-Lync's Mastering Shear Force and Bending Moment Diagrams course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Idealized Stress-Strain Curve for Steel Design”

What will you learn in this free Mastering Shear Force and Bending Moment Diagrams lesson?

The instructor simplifies the steel curve to an elastic, perfectly plastic model and quotes 200 GPa for steel's modulus. The lesson compares brittle concrete with ductile steel, then covers stable, neutral and unstable equilibrium, the force, moment and torsion equilibrium equations, and a mass and spring dynamic equation.

  • Elastic, perfectly plastic idealization of steel
  • Concrete weak in tension, strong in compression
  • Stable, neutral and unstable equilibrium
  • Force, moment and torsion equilibrium equations

What comes after lesson 2?

The next free lesson is lesson 3, “Introduction to Beams: Loads, Beam Types and Supports” (26 min). Later in Skill-Lync's Mastering Shear Force and Bending Moment Diagrams course (paid): lesson 4, Mastering Bending Moment and Shear Force Diagrams; lesson 5, Bending Moment and Shear Force Analysis in Beams; lesson 6, Analysis of a Simply Supported Beam with Triangular Loading. The full course has 54 lessons (27 h 10 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Let's look at the idealized stress strain steel curve, like how that typically looks. So this is the idealized stress strain curve that we use for our steel design. So as we can see here, like a lot of the curvilinear part has been kind of eliminated. And this is a very, very simplistic form of the stress strain curve. So if we see here, this is actually an elastic, perfectly plastic assumption that we have followed here, wherein between the original point and the yield stress point, there is a linear relation between the yield stress and the strain.

So as the strain increases linearly, I mean, the yield stress also kind of increases, and therefore there is a linear relation between stress and strain. And then beyond the yield stress point, we don't really consider this further increment in the stress or the resistance of the element. So we just considered the material is going to behave fully plastic, wherein there is no further increment in the strength or stress, but then there is just increment in strain or deformation. The stress strain curve we typically work with when we work on the design, just to keep our calculations simple.

Now let's just have a quick recap of the different points that we had considered in the theoretical stress strain curve. So as we see here, the blue line actually represents the stress strain curve, which is plotted until rupture of the steel bar. So if you had conducted an experiment of a steel bar, which is submitted to tension, in that case, like this is kind of the stress strain curve you would tend to achieve. So as we mentioned before, like point A is the proportional limit. So this is the value till which Hooke's law is valid.

And then we have a linear relation between stress and strain. And then the slope of point of line OA, that is equal to the modulus of elasticity or the proportionality constant that we had seen before, which was E. So the slope of that line is equal to E. And that's how the relation was developed. Like stress was equal to E into epsilon, wherein stress was sigma and epsilon is strain. So therefore, we have this linear relationship. And the slope of that line is equal to the proportionality, the constant, which is equal to the modulus of elasticity.

So in this case, this is for steel. The slope of line OA is actually equal to modulus of elasticity of steel, which typically is 200 GPA. As we proceed further, as we discussed, like point B is basically the yield point. And then this is where the inelastic behavior starts to set in in the material. And therefore, no more in the elastic region. And therefore, the Hooke's law is not valid. And then beyond this point, the stress strain curve trends to flatten out because the material has started to lose its resistance.

But the deformation tendency is still there. And then the region between points C and D, that's the plastic deformation region, wherein the material is actually undergoing a lot of inelastic deformation, wherein, but there's not much increment in the internal stress. And that is typically ignored in the simplified stress strain curve. And then as noted here, like the increment in the deformation is much more with respect to the increase in internal stress. And that's where we see this curve like kind of flattening and not really, wherein on the initial phase, it was more vertical.

But then in beyond point A, it actually tends to become more and more flat. And then point D is basically, as we discussed, like that's the maximum stress developed in that bar. So that is nothing but the ultimate tensile stress of the element or the tensile strength of that material. So beyond that, there can't be any further increment in the material at all. But if we note like to reach point D, the material has to actually undergo a lot of deformation as well. Like if you see here, if this was a 30 percent, wherein the fracture point is occurring, so D would be somewhere close to 25 percent or so.

So to be able to reach point D, the material has to deform quite a lot. And that is not really favorable in the real life design of structures. And that's the other reason like why we typically don't want our materials to be loaded to a certain extent that the material actually has to deform so much to exhibit the ultimate strength. And that's why we typically count on the yield point as our strength of that material for our design purposes. And then lastly, like point E is the fracture point, wherein the material actually fails and breaks out.

So this was all about steel from a theoretical standpoint and then how we look at that from a simplified standpoint. Now let's look at the other material, which is concrete. So concrete is another very, very common material which is used for construction of structures, like including buildings or airports and stuff of that sort. So let's just look at the stress strain curve of concrete. The thing is, like concrete is a material which is very, very brittle in that it does not really have a very high deformation capability.

And that's why it's brittle versus steel, which is very, very ductile. And then the other thing is, like steel is very good in tension, but concrete is very weak in tension, but it has a very, very good compression capacity. And therefore, concrete is used in elements, which is more or less seeing compression or a combination of compression and bending. So let's just look at the stress strain diagram of concrete. So the positive y-axis here actually is indicating compression stress. And then the positive x-axis here is indicating compressive strain.

And then the negative y-axis is indicating tensile stress. And then the negative x-axis indicates tensile strain. So as we can see here, like from the behavior of concrete, so it has a much more prominent behavior in concrete, in compression. But in tension, it does not really have enough capacity because we see, like, beyond, I mean, beyond this stress value, it does not really go any further. But then from a compression standpoint, it actually has this high kind of capacity, which is because concrete is very, very good in compression.

So this and concrete, unlike steel, does not really exhibit a very linear behavior in terms of proportionality between stress and strain. So therefore, like, it's more or less a very curved type of a stress and strain curve. So we typically deal with the initial, there are, like, various methods of determining the modulus of velocity of concrete. And there are a lot of empirical expressions as well present in the Indian standard and some of the other international design codes, like American codes and all. So it's more of an empirical formula that we typically have to determine the modulus of elasticity of concrete.

So it's not a very, very straightforward calculation as such. It's more of an empirical formula that we typically use. So as we see here, like, once, I mean, when we keep increasing the compression stress, the compression strain, rather, the compression stress keeps increasing. This is more of a nonlinear behavior. And then this could be more or less considered like an elastic region because this region is still kind of linear to a certain extent. And therefore, concrete exhibits some elasticity. But then beyond this yellow line, it's all inelastic region.

So beyond this point, concrete keeps increasing with strain. But then the relation is nonlinear. And then once it reaches this maximum stress value here, which is the maximum compression stress, beyond that, it just keeps reducing. I mean, the stress or the internal strength keeps reducing, but the strain keeps increasing until we reach this point, wherein the compression strain is actually equal to the crushing strain. And since this is compression, the concrete is actually undergoing crushing and not really tensile failure because we are looking at compressive stress and strain curve here.

On the other side, if we look at the tension side over here, so it's not as prominent compared to a compression because the tensile strength of concrete is very, very minimal. So that is why we see like if this stress was, say, sigma, this would be close to 10% of sigma, the maximum tensile stress. So like whatever the compression strength of concrete is, typically 10% to 15% of that is equal to the attention capacity of concrete. And therefore, we see a very, very small stress strain curve for concrete under tension versus under compression.

So some of the important aspects that we could observe here from a concrete stress strain curve standpoint, as can be seen in the stress strain curve, concrete is actually very, very strong in compression compared to tension, which is signified or implied by the area which is covered by this curve, the stress strain curve and compression versus that in tension. The other thing is like the maximum compression stress achieved by concrete is much higher than the tensile stress. And as we discussed before, like the tensile capacity is equal to more or less 10% to 15% of the maximum compressive stress.

And then the fact is like in structural engineering field, like we typically ignore tensile capacity of concrete. So we primarily rely on the tensile capacity provided by reinforcement steel or steel rather. So whenever we are working on a reinforced concrete structure, whenever we see tension, we actually provide rebar over there or reinforcement over there. And wherever it's compression, we could rely only on concrete. But then from a rebar detailing standpoint, like we could provide rebar on compression sides as well. I mean, that's not really in the scope, but just something to know.

Like we typically ignore tensile strength of concrete for all design purposes. Also, as we mentioned here, Like there is no definite yield stress point or yield point in concrete stress strain curve, which we were getting in steel. So that's another very important aspect to consider. And therefore, we always deal with the maximum compressive stress because that is achieved with not a very, very high deformation. So that deformation is acceptable in real life structures. So therefore, we always consider the maximum compressive stress, obviously with some factor of safety.

And then concrete is actually brittle. So therefore, it does not really undergo a lot of deformation before failing. Unlike steel, which was undergoing a lot of deformation, as we saw, we had those different regions, like the region between CD, wherein it had the plastic zone, and then beyond D, wherein it went to point E and it was fracturing. But then in concrete, we don't have as many regions because concrete is brittle and therefore does not really undergo or does not really have a lot of regions.

So it does not need to undergo a very high deformation to fail. It fails with a very, very minimal deformation as well. So that's the reason why concrete is brittle. And also, like the concrete stress strain curve in compression zone is initially elastic to a certain extent, but then it transitions into the inelastic region where the curve becomes nonlinear. And just for information, like before the yellow line here, as well, this is a linear portion, but it's approximated as linear. But in reality, even this is going to be curved, but it could be more or less approximated as a straight line.

And that's where the proportionality is kind of calculated. But as I mentioned before, it's not a very straightforward thing. So a lot of empirical equations have been developed to determine the modulus of elasticity of concrete. All right. So this was all about steel and concrete, stress and strain curve, because the two most common materials which are used in construction industry and design of buildings. So as we saw, like there's not a lot of similarity between steel and concrete. I mean, for example, steel is very, very good in tension, but concrete is very weak in tension, but very strong in compression.

The other is like steel can undergo a lot of deformation, as we saw, because it has high ductility, but concrete does not really have enough ductility because it's a brittle material. And therefore, it does not undergo a lot of deformation before failing. So there are these key aspects and key differences between steel and concrete that we discussed. And that was just give a heads up of the different materials we deal with in the structural engineering field. Now, let's move on to the equilibrium part of the building.

So as we know, like from statics, when we were in our higher secondary, like whenever we have any structure which is subjected to external loading and all. So there have obviously have to be some opposite forces and acting on that same structure for to maintain equilibrium of the structure. So what do we mean by equilibrium? So a body is said to be in equilibrium where it is not experiencing any net force or unbalanced force, which would keep the body continuously in motion. So imagine you had a structure or a building which had a net unbalanced force, and therefore what's going to happen is that building is actually going to be in motion continuously.

But that does not really happen in real life, right? So how has that been possible? That is because it has been made sure that the building is always or the structure rather is always in equilibrium. So what that means is like whatever external forces the body is seeing, there's always a countering or a counteracting force coming from somewhere so that it kind of nullifies the effect of the external force. And there are like various means and methods of doing that. But this is what an equilibrium is.

I mean, it's basically the state wherein there is no net force acting or unbalanced force acting on that structure. So a body experiencing external forces needs to be supported for equilibrium. So by support, we mean like different kind of supports that we typically deal with. So if we don't have those supports, for example, say if you had a block which is submitted to a horizontal force and then that block is actually sitting on a surface. So if the surface was smooth, in that case, the block will keep moving if there's that constant force applied.

But then if you had a rough surface, which is producing friction, in that case, the friction is actually acting like a resisting force. And that could ensure that there is no net force on the member and therefore the body may not be in motion. So that was just an example. But in real life, say if you consider any building, so you have like beams, you have columns and then you have slabs and then you have foundations. And ultimately, the entire thing is sitting on soil. So there is that equilibrium that has to be maintained everywhere.

Like whatever load is being applied on the slabs, they have to be resisted by the beams. So the beams will be giving some reaction forces to the slabs because the beams are acting like supports for slabs. And therefore, whenever a load is applied on the slab, the beams have to counteract that load so that the slab is equilibrium. Similarly, if you have any load acting on the beam, the beams are supported on columns. So therefore, whatever load of the beam is seeing, they have to be counteracted by the reactions coming from the columns and so on and so forth.

So equilibrium is a very, very important aspect in a real life structure. And we always need to make sure like equilibrium is maintained. Otherwise, the body will be unstable and there will be a net unbalanced force in the system. So as we mentioned earlier, like when a body is in equilibrium, total external force and reaction forces need to be such that they balance each other so that there is no net force of any form. And this is coming from Newton's second law, if you could recall, wherein what that said is like if there is an external force which is applied on the body, in that case, there will be this inertial acceleration present over there due to that net force.

So if the net force is zero, that means there is no net acceleration in the body and therefore the body is kind of in equilibrium. So that is what this says. And the other thing is like Newton's third law, which says like every action has an equal and opposite reaction. And that's what we typically count on. And that is what is maintaining the equilibrium of the structure. And then the force actually could be of any form. It could be a translational force. It could be moment.

It could be twisting moment. So there are these various types of force that we typically deal with in the industry. And we'll be touching upon some of them in the later slides. So there are like these three basic types of equilibrium that we have for any structure. So one is stable equilibrium. The other is neutral equilibrium. And the third one is unstable equilibrium. So what do we mean by stable equilibrium, neutral equilibrium and unstable equilibrium? So this is a very, very common example that we typically deal with.

So a stable equilibrium is said to be achieved, wherein if we cause a little bit of disturbance to the structure in equilibrium, it comes back to its original equilibrium state once that disturbance is removed. So that is known as a stable equilibrium. Rather, what that means is the structure is stable enough to regain its stability after disturbance which was applied before is kind of removed. So, for example, if we consider, say, a ball or a sphere which is kept in a bowl. So in that case, what happens is typically the ball will be reaching its stability once it's at the foremost point of the bowl.

So here now, if we consider, say, if we disturb this ball by, you know, applying a horizontal motion to this ball. So what happens is the ball temporarily displaces to that new location. But once that disturbance is removed, it tries to come back to its original stable position or the equilibrium position because that's where it was in equilibrium. So this is known as a stable equilibrium because here the structure is coming back to it, coming back to its original equilibrium shape. And this is the most preferred equilibrium state that we would always want to have in our structure.

And then the other thing that has been seen is like in this system, the energy of the body or the total potential energy of the body is always at its minimum in this state. So if we consider the energy diagram of this ball, so if it was, say, at this highest point over here, this will have pretty high potential energy. And then if it was at some somewhere intermediate point, in that case, it will have some intermediate magnitude of the potential energy. But the minimum energy would be achieved when it is at its lowest point.

And that is basically a mathematical definition of stability as well. Like that's wherever you see the minimum energy in potential energy, that is the state of stable equilibrium. Now, second one is the neutral equilibrium. So what happens here is like if you apply a disturbance to the body in equilibrium, so the body reaches a new state of equilibrium and does not really come back to its original state of equilibrium. So consider, I mean, a very common example of that is if you consider a ball or a sphere which is sitting on a flat surface and this body is initially in equilibrium.

And then if a horizontal displacement is applied, so what the ball does, it just reaches that new position and then it's back to its equilibrium state at that point. So it does not try to come back to its original equilibrium position. So this is known as a neutral equilibrium wherein the body tries to reach a new equilibrium state due to some disturbance which is applied to the body initially in equilibrium. This is not a desired equilibrium state and the reason for that is because in the real life structure, in that case, you would always want the structure to maintain its shape and geometry of that the way it has been constructed.

So if the body is kind of deformed to a certain extent that it is reaching its new equilibrium state, so for that to happen, the body might actually need to go under a lot of deformation which is not really favorable. So therefore, in real life structures, like a neutral equilibrium is definitely not recommended. Third and the last type of equilibrium is unstable equilibrium. So an unstable equilibrium, a body said to be in a state of unstable equilibrium when a small disturbance to that equilibrium state actually leads to the body becoming unstable or collapse.

For example, if you consider the same ball that we had considered in the case one, which was a stable equilibrium, but then the ball is actually kept on an inverted ball and then it's kept on top of that. So in that case, what happens is like if you apply a horizontal disturbance here, the ball actually slides down along the surface of the ball and it just keeps sliding down. So there's no regaining of this. I mean, the ball does not really come back to this position.

Neither does it reach a new equilibrium position. So just one small disturbance makes the ball very much unstable. And over here, in this case, what happens is the energy of the ball is highest because this is at the highest point. So the total potential energy or the mechanical energy of the ball is highest. And that is very much undesirable because that if you have a body which is at its maximum energy, so that means the body is unstable and that is not desired. These are the three types of equilibrium that a body typically would be in.

Now, let's move on to the equations of equilibrium. So obviously, like equilibrium is, as we mentioned, like it's a state wherein the total or the net force on the body is zero, which means all of the forces are to us. I mean, somewhere counteracted so that there is no net force acting on the structure and therefore there is no motion in the structure. And that's what we want our real life structures to be in the state of. Now, there are a few mathematical equations that we typically have for to make sure that the body is equilibrium or rather for analysis of bodies which are in equilibrium.

So the first one would be like total summation of all the forces is equal to zero. So what FI is nothing but the it's basically the system of external forces applied on the structure and also the system of the reaction forces that it is getting from the supports. So for a body to be in equilibrium, as we mentioned, there has to be supports to support the structure. So in that case, whatever external load we apply on the structure, it will be getting the corresponding reaction from its supports.

So in real life building, for example, if you consider a building type structure, the external loads could be coming from people like moving around the building or maybe if you have wind load or seismic load or you have a bunch of floor finish and all. So that is all causing different kind of external loads on the building. And what is supporting the load ultimately is the foundations that we have for the building. So all of the load ultimately transfer from slab to beam, from beam to column and then from column to the foundations and from foundations to the soil.

So for our structure, like all our columns are supported by the foundations. So in our case, the foundations are those primary supports. So all the external loads that we had and then all the reactions we are getting from the foundation that are actually supposed to equate, like the total net action of them have to be equated to zero for the body to be in equilibrium. So these are all translational forces like and that force could be saying X direction or Y direction or Z direction. So this is an equation related to the translational force that we have.

Similarly, we could have a moment or a couple type of force as well, which causes the element to bend. So in that case, like the total net moment that the element is seeing at any location also has to be equal to zero. So like the summation of the external moment acting on an element, the internal moment that is developed in this element. So all of that has to ultimately sum up to zero so that the net moment in the body is not there. Otherwise, the body will keep twisting or rotating rather.

And then the third one is torsion. So again, similar to the translational force and the rotational force, we also have a twisting force. So if you have any element which is subjected to an external force, which causes the building or the material or the element to twist. So there has to be a counteracting twisting moment, if you will, which maintains the integrity of the structure. And therefore, the equilibrium has to be maintained. So there has to be that reaction, which is developed to counteract the acting external torsion.

So these are the three fundamental equilibrium equations. Like the net summation of all the translational force has to be zero. The summation of all the moments, the rotational moments has to be zero. And then the summation of torsion, torsional moments has to be zero. And this includes both external as well as external forces applied and also the reaction is developed at the support. So looking at that more into detail. So consider, say you had a body of a very irregular shape. And then there are a bunch of external forces acting on these, which are indicated by these arrows like F1.

And then we have a bunch of like different forces like F1 and F2, which are like translational forces. So we have F1, we have F2, we have F3, F4, F5, and F6. And then on top of that, we also have some moments acting on the structure, which is like M1, indicated vectorially by these double arrows. So we have M1, we could have M2 as well here. So there are these external moments acting on the structure. And then there is also some torsion acting on the structure, which is T1 here.

So these are some of the external forces which are acting on this body. And then if we see here, these triangles with some little hash here. So they're actually the supports of the members. So whatever external load we have over here, there'll be a bunch of reaction forces or supporting reactions, which are developed at the supports. And each and every support has its own reaction force. For example, this support here is developing a force of R9 and R10, which is a reaction force here. This support here is developing a reaction of, say, R1 and R2.

This support here is developing a reaction of R3 and R4. And there is also a rotational reaction, RM3, RM standing for reaction moment. And then this support here is having a reaction of R5 and R6, which are translational forces. And then in addition to that, there is a RM2, which is the rotational resistance. This is a system of forces which the body is undergoing, which is comprising all of the external forces acting on this and then all of the support reactions also. For this body to be in equilibrium, all of these forces have to be such that the net effect on this body is nullified and it is zero.

So that means summation of all of the F forces or the translational forces has to be zero. Summation of all of the M forces or the forces like M1 and then M2 and then RM3, RM2, all of them have to equate to zero. And then lastly, all of the torsional moments like T1 and then T2 and all of them have to sum up to zero so that the equilibrium of the body is overall maintained. And that is what is mentioned here. So that was a static equilibrium wherein the body is not in motion.

But as we know, we also see our structures kind of vibrating. For example, if you have a building which is submitted to seismic loading, in that case, the building actually vibrates because the ground oscillates. So in that case, we also have the body in equilibrium, but that is known as a state of dynamic equilibrium wherein the body is in motion, but it's still in equilibrium. And the reason for that is there is some inertial forces which is developed on the body and that kind of maintains the equilibrium of the structure.

So, for example, this is a very, very common concept which is used in structures like if you have, say, a body of mass M, which is attached to a structure with a spring of stiffness K. And then you have a dynamic loading applied on that which is a function of time. So it's a time varying load which is applied on the structure. So in that case, the response of the structure, which is the displacement of the structure or the internal forces and all of that will also be time dependent because the force is changing with time.

So that's a dynamic loading and therefore the body is also undergoing dynamic deformation and therefore the equilibrium is also dynamic in nature. And that, as I mentioned, that's basically applicable for a time dependent force. A very, very common example of that kind of force is a seismic load or earthquake load. So let's consider a body of this mass M and then that is attached to this support here with a spring of stiffness K. And it is subjected to this dynamic loading Ft. So in that case, to maintain the equilibrium of this, so there's this net force acting on this body, which is Ft minus Kx.

So there's this inertial force which this body develops. And that inertial force per Newton's second law is equal to mass times the acceleration of the body. And that is what is mentioned here. So this is kind of the dynamic equilibrium equation that we have for this body, which is equal to mass times acceleration, which is second derivative of displacement X with respect to time. And this is the inertial force plus the spring stiffness force. So K is the stiffness of the spring. And Xt is the deformation of the body with respect to time.

And this entire thing is equal to the applied load Ft. So this is the resistance force, which is mass times acceleration and spring stiffness multiplied with deformation. And Ft is the external dynamic force applied. So this is the dynamic equilibrium equation that this body has. So as we mentioned before, like typically we don't want a structure to under. So a net deformation, but then since seismic load is a very, very common example, in that case, we do need to consider that our body is or our structure is in equilibrium when it is subjected to dynamic loading as well.

And that's where we have to deal with these kind of differential equations to understand structural dynamics of buildings.

Want the rest of Mastering Shear Force and Bending Moment Diagrams?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Mastering Shear Force and Bending Moment Diagrams course

The remaining 51 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Mastering Shear Force and Bending Moment Diagrams course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.