← Previous lessonFree lesson 3 of 3 · lesson 3 of 23

Unlock all 23 lessons of Electrical wiring harness using Catia V5 & Electrical AutoCADFull course ₹40,000 · paid

Price & syllabus
Free lesson · 7 min · no payment

Sketching Rectangles, Oriented Shapes, Hexagons and Slots

A free lesson from Skill-Lync's Electrical wiring harness using Catia V5 & Electrical AutoCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Session 3 - Profile_2 Rectangle”

What will you learn in this free Electrical wiring harness using Catia V5 & Electrical AutoCAD lesson?

The instructor walks through the rectangle toolbar in the CATIA sketcher: standard, oriented and centered rectangles, parallelogram and centered parallelogram, elongated and circular elongated holes, keyhole profile and hexagon. Examples enter exact values, such as a rectangle with a 100 mm width and 50 mm height from a point at 20 by 20.

  • Two ways to define a rectangle
  • Oriented rectangle and parallelogram
  • Elongated hole with radius 5 and length 70
  • Keyhole profile and hexagon

What comes after lesson 3?

Later in Skill-Lync's Electrical wiring harness using Catia V5 & Electrical AutoCAD course (paid): lesson 4, Session 4 - Profile_5 Ellipse; lesson 5, Session 5 - Profile_7 Point; lesson 6, Session 6 - Operation_1 Corner. The full course has 23 lessons (10 h 4 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, in this video, I'll show you how to work with rectangle. So here I'm having the rectangle icon and the small arrow indicates that there are some more icons which are hidden inside this. So let's bring this out. So here I have my rectangle toolbar. Out of this, the first one is rectangle. As we all know, the rectangle can be defined either by specifying the length and the width or we can specify the lower left corner and the upper right corner. So this can be done in both the ways. So first, let us start the rectangle. So here I'm starting with my lower left corner and here I'm ending with my upper right corner. This is the first method. And the same can also be done with the help of the sketch tools. So next one, again, I'm going to rectangle. You can see here it is asking the X comma Y from the origin for the first point. So I specify my first point at 20 by 20.

So here you can see the first point. So here you can see the first point. So here you can see the first point has been defined by at 20 by 20. Next for the second point, either you can again specify the X comma Y or you have the option to specify your width as well as the height. So I'm giving the width as positive 100 and the height as 50. So you can see like from here it has gone for the 100 mm. That is the width and the height I have given as 50 mm. Next, we are going to see the oriented rectangle as the icon suggests.

So here we are having the width inclined at an angle and the height perpendicular to the width. So I start here. This is my first point. I'm specifying the width at an angle and always the height will be perpendicular to your width. This is how we work with oriented rectangle. Next, we have parallelogram. Next, we have parallelogram as the name suggests opposite sides of the rectangle or parallel to each other. So here I start my first point. Next, I can specify the width at any angle and the height also can be oriented to a required angle.

So this is how we draw parallelogram. So this is how we draw the parallelogram. So next, we are having the elongated hole. This option specifically is very important when you want to draw oblong holes or oblong features. So first, I start with my first point of the axis. This is the next point of the axis. Next, you drag your mouse to define the radius. So this is how you define the elongated hole. Now, I'll show you how to create elongated hole with the help of sketch tools.

I click on this. I click on this elongated hole. First, it is asking the radius. I fix my radius as 5. Now, for the first center, it is asking for the origin. I specify my origin as 20 by 20. Now, for the second center, either you can specify the x, y or you can specify the length and the angle. I prefer to specify the length as 70 and at an angle of 0. So you can see like I have my first point at 20 by 20 and I have the length as 70 and the angle as 0. So this is how you can create the elongated hole.

Now, we will talk about circular elongated hole. So first, you click on this. Specify the center point. Next, the start point of your arc and the end point of your arc. Drag your mouse to define the radius. You can obviously use the sketch tools for creation of the same. Next, I'll show you how to use the keyhole profile. So it's as simple. You have to draw the axis and define the small radius and the big radius. So I start my axis over here and the axis end point over here. Now, it is asking for the small radius.

So I define the small radius either by a pick on my screen and it is asking for the second radius. So I define my second radius here. So this is how you define the keyhole profile. Next, you have a hexagon over here. So here I click on hexagon. First, it is asking the hexagonal center. I define my center point over here. Next, either it is asking for a dimension value or an angular value. So I am specifying the dimension as 100 mm at an angle of 0 degrees. So you can see like it has created a hexagon with the size of 100 at an angle of 0. In the most latest versions of CATIA, here in the hexagonal tool, it is also possible to decide how many number of sides you want for your quadrilateral.

So that is obviously in the next versions which we have. Next, we will see the centered rectangle. In this, as the name suggests, first, you have to specify your center point. Next, you have to specify your one corner point or you can specify your height and the width. So here I am specifying my second point. This is how you define the center rectangle. Next, you have the next option called centered parallelogram. To define this centered parallelogram, it is required that you need to have two references which are already available.

So I take my line to define the two references which act as a parallel lines for the rectangle which I am creating. Here, I click on centered parallelogram. It is asking me to select the first line. I select the first line and select the second line. Automatically, the intersection of your two selected entities will become the center for your parallelogram. And you can drag your cursor to create the parallelogram or obviously you can define the same by using the sketch tools toolbar. So this is how you create the centered parallelogram.

And you can drag your cursor to create the時候. Eddie Ved Tolbertus X You

Want the rest of Electrical wiring harness using Catia V5 & Electrical AutoCAD?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Electrical wiring harness using Catia V5 & Electrical AutoCAD course

The remaining 20 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Electrical wiring harness using Catia V5 & Electrical AutoCAD course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.