Unlock all 23 lessons of Electrical wiring harness using Catia V5 & Electrical AutoCADFull course ₹40,000 · paid
Drawing Lines, Tangent Arcs and Three-Point Arcs with Profile
A free lesson from Skill-Lync's Electrical wiring harness using Catia V5 & Electrical AutoCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Session 2 Profile_1”
What will you learn in this free Electrical wiring harness using Catia V5 & Electrical AutoCAD lesson?
The instructor demonstrates the Profile tool in the CATIA sketcher. A chain of lines is drawn with help lines, a tangent arc must start from the end of a line, and a three-point arc uses the last point of the line as its first point. Click-and-drag also creates a tangent arc.
- Drawing a series of lines with Profile
- Creating a tangent arc from a line end
- Three-point arc from the last line point
- Using drag to switch to a tangent arc
What comes after lesson 2?
The next free lesson is lesson 3, “Sketching Rectangles, Oriented Shapes, Hexagons and Slots” (7 min). Later in Skill-Lync's Electrical wiring harness using Catia V5 & Electrical AutoCAD course (paid): lesson 4, Session 4 - Profile_5 Ellipse; lesson 5, Session 5 - Profile_7 Point; lesson 6, Session 6 - Operation_1 Corner. The full course has 23 lessons (10 h 4 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello, in this video, I'll show you how to use the profile tool. As I click on profile tool, I can see the sketch tools got expanded. In profile tool, I'm having three options. Either I can use a line or a tangent talk or a three-point talk. To start with, let's go with the line. So I start my profile tool here. So I can draw a series of lines and you can also notice the helplines getting generated. So that I can close it. So once the start point and the end point meets, the command will be automatically exited. So now we will see how to use the tangent talk option in the profile tool. I click on this profile again. So I start with a line. So I can't start the tangent talk as the first point. So first we need to have a line and from the end of the line, we can have an arc which is tangent to the initial line.
So I start my line from here. I go to here and now I use the tangent talk option to create a tangent talk. By default, it will again go back to the line. So again from here, I choose the tangent talk option and I close this. Now without going into the sketch tools option, you can use your left mouse, hold and drag. It will create a tangent talk. So again from here, I'm holding and dragging to create a tangent talk. Now the last option in the profile tool is using a three point talk. So I start with a line. I end over here. Now I choose the three point option. The last point of the line will be taken as the first point of the three point talk.
I click for the second point. I click for the third point. Now by default, again, the line will be starting. I click here. Again, I go to this three point talk. So the same thing happens over here. So you can see like the arc is not tangent to the line. Of course, you can make it tangent, but I have chosen it not to be tangent. So this is about the profile tool. Thank you.