← Course overviewFree lesson 1 of 3 · lesson 1 of 23Next lesson →

Unlock all 23 lessons of Electrical wiring harness using Catia V5 & Electrical AutoCADFull course ₹40,000 · paid

Price & syllabus
Free lesson · 18 min · no payment

Introduction to CATIA V5: Interface, Workbenches and Sketch Options

A free lesson from Skill-Lync's Electrical wiring harness using Catia V5 & Electrical AutoCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Session 1 Introduction and Sketch”

What will you learn in this free Electrical wiring harness using Catia V5 & Electrical AutoCAD lesson?

The instructor introduces CATIA as a CAD, CAE and CAM tool, then explains mouse controls, the workbench list, the P1, P2 and P3 platforms and the interface. The lesson then covers Sketcher options: grid and snap to grid, white, green and purple constraint colours, smart pick, and adding favorite workbenches.

  • Mouse controls for pan, spin and zoom
  • Choosing workbenches such as Part Design
  • Grid, snap to grid and smart pick
  • What white, green and purple sketch colours mean

What comes after lesson 1?

The next free lesson is lesson 2, “Drawing Lines, Tangent Arcs and Three-Point Arcs with Profile” (3 min). Later in Skill-Lync's Electrical wiring harness using Catia V5 & Electrical AutoCAD course (paid): lesson 4, Session 4 - Profile_5 Ellipse; lesson 5, Session 5 - Profile_7 Point; lesson 6, Session 6 - Operation_1 Corner. The full course has 23 lessons (10 h 4 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

So, in this video, let us have a look into the introduction to CATIA. CATIA is a leading CAD, that is Computer Aided Design Tool with additional capabilities to perform CAE, that is Computer Aided Engineering, which is the analysis part, that mechanical analysis, where we can do the structural analysis and CAM, that is Computer Aided Manufacturing, that is the CNC part. So, in CATIA, we will be able to do not only CAD, but we can also perform CAE and CAM applications. CATIA is developed by Dissolve Systems France, and we can manage the entire lifecycle of the product with CATIA, that is, from the point where we start to design our part, and where we end the lifecycle, that is, where we scrap the part, until this, the total lifecycle can be managed.

CATIA is managed with CATIA. And the name CATIA stands for Computer Aided Three Dimensional Interactive Application. Many automotive, aerospace and product development companies rely on CATIA for their design and development activities. For example, I mentioned some of the names of the companies who are using CATIA in India, like Tata Motors, Renault, Mahindra, Holstrom, Bosch, Airbus, Boeing, Tesla, and the list goes on. Now, I will explain how to communicate with CATIA with the help of your mouse. So, the left mouse is used for selection, like you can select your entities with the help of your left mouse, or if you wanted to select multiple entities, you have to hold the control key to select the entities.

The purpose of left mouse is basically for selection. And next, the right mouse is used to have a shortcut menu. So, wherever, either in the specification tree, you can right click, or in the model, you can right click. So, the right click purpose is to have an interactive menu or the shortcut menu. Now, the middle mouse is used to pan your model. So, pan is to move your model. Just hold your middle mouse and move. And to spin your model. And to spin your model, middle mouse and right mouse, both together. So, with the help of your middle mouse and right mouse, you can spin the model.

Or, if you are a lefty, you can use the middle mouse and left mouse to spin your model. To zoom, there are multiple options. Now, hold your middle mouse and right or left click only once. That means, hold the middle mouse, right click and release. So, I can use the zoom option. Or, you can hold your control key on your keyboard and the middle mouse to zoom your model. Next, we have multiple workbench. Next, we have multiple workbench. To shift your workbench, you have to go to start and choose the type of workbench what you want.

So, the part design is used for creating the part models. Sketcher is used for creating the sketches for your part design or surface design. And assembly is used for assembling the parts which are designed in the part design workbench. Next, drafting is used to generate 2D drawings. And sheet metal design or generative sheet metal design is used for creating the sheet metal models. And functional tolerancing and annotation is used for creating FTA, that is the annotations on your model. And if you wanted to do the surfacing, you go to shape and we use generative shape design.

And if you wanted to do the analysis, we go to analysis and simulation. We have the generative structure analysis workbench to do it. And if you wanted to do any wiring and harness activities, we go to equipment and systems. We go for electrical harness discipline. And we use all these electrical workbenches to do the harness design. Similarly, we have the piping discipline to go for piping. So, this is how we start the various workbenches in CATIA. And inside CATIA, we are having three platforms. To understand the platform, we go to tools, options.

And here we are having the three interface style platforms. That is P1, P2 and P3. So, what does this mean? So, P1 is for small and mid-sized companies, where we have the less license cost and limited capabilities. And P2 is for advanced design, where it is used for mid to high-end companies with moderate capabilities. And the P3 is the costliest license, where we have high-end A-class surface design, used for automotive and aerospace applications. But as a part of this course, we are going with V5 and P2 module.

Now, we will look into the GUI of CATIA. GUI stands for graphical user interface. On the top, what we have is the title bar. As the name suggests, it displays the title of your model, which is displayed in your graphics window. As well as the present version of CATIA with which you are dealing with. Next, we have the menu bar. So, this is the place where you change your workbenches from one to other. That means, we can shift from part design to assembly design, assembly design to drafting or whatsoever.

So, we can change workbenches with the menu bar. It displays the orientation of your model. And also, with the help of the compass, you can use the translation and rotation operations on your model. Next is the tool bar. We have the tool bars on the bottom, as well as the right side of your graphics window. And, based on the workbench in which you are working, the tool bars will also display on the top of your graphics window. So, next is the status bar. Status bar gives you hints for the next operation.

So, if you go for a hole, what we have to do on your model. So, it gives step-by-step hints. So, during our initial learning with CATIA, it's always better to follow the status bar for those hints so that we can complete our model. Next, on the right side of your status bar, we have the command input, where you can give the commands by typing C, colon, and the name of your command. So, it's very complex to use CATIA with the commands. So, it's better to communicate either with the menu bar or with the toolbars.

So, now, let us understand some of the options which are available in the SketchUp workbench. So, here, I'm having the SketchTools toolbar and in this, the first icon toggles the display of your grid. So, here, now, the grid is displaying. If you don't want the display of the grid, you can again click on the same icon, Grid, and the display of your grid will be off. And, again, to display the grid, click on this grid icon. The second icon which is available is Snap to Grid.

Snap to Grid is, suppose, if I wanted to draw a line now. I can start anywhere irrespective of my graph points and I can end anywhere irrespective of my graph points. When your Snap to Grid is on, you can start only at a grid intersection point and end only at a grid intersection point. So, this is Snap to Grid. The settings of this grid can be changed. Here, you have a thick line in your grid and also the dotted lines. The thick line is called Primary Spacing and these dotted lines are called Graduations.

So, you can adjust the space. You go to Tools, Options. On the left-hand side, you switch to Mechanical Design. And in the Mechanical Design, you go to the Sketcher. Now, here, this is the grid portion. In grid portion, the display is on and the Snap to Point is on. You can toggle the display even from here. The same two options are these two. Next, Allow Distortions. Allow Distortions is nothing but here what is happening. The distance between two primary spacing lines is 100 in mm and there are 10 number of graduations between two primary spacing.

So, here in X direction as well as in the Y direction, it's the same. If you wanted to change it, you can go for Allow Distortion and you can specify a different value for X and Y directions. So, this is the Allow Distortions option. And coming to down, you have some more options. Here the default color of the elements. That means whenever you are drawing some entity, some entity in your sketcher, by default it appears in the white color. White color indicates that this is not constrained, that there doesn't exist any constraints. Constraints again are of two types, geometrical constraints and dimensional constraints.

So here you see the horizontal, this is called geometrical constraint and if you place any dimension to this line, this is called as a dimensional constraint. So all these horizontal, vertical, coincide, tangent, parallel, perpendicular, angular, all these are geometric constraints and when you place some dimensions, either linear, circular, radial, angular, all those are called dimensional constraints. So now, once you start fully constraining the sketch, this turns into green color, indicating it, that is, it is fully constrained in CATIA. The fully constrained is also called as isoconstraint and if you are still trying to place any dimension, it indicates that this is over constrained now.

So, in this case, what you can do is, you can delete this dimension, I just double clicked or you can convert this dimension into a reference dimension. Okay, so these reference dimensions cannot be edited. Whenever a normal dimension is getting edited, the reference value automatically gets updated. So now, this is fully constrained and this is over constrained. So here, if there are no constraints, it's in white color and if it is fully constrained or ISO constrained, it is green in color and if it is over constrained, it is purple in color.

So, these colors also you can change, but I recommend you not to change these. Those you can change from tools, options, coming down. So here, you have the default color as white and other colors. So you have the over constrained as purple and fully constrained as green. And here, you are having some more colors like the smart pick color is blue and construction elements are in gray. So, smart pick is nothing but the help lines. Whenever you are drawing some lines, so I am drawing something, now you see, this is coming in blue color indicating that smart pick is active now.

So, here, it is horizontal. That's what it's meaning. When I am drawing at an angle, there is no smart pick, but as soon as you shift into vertical, the smart pick is activated again. Now, you come to the left. So, here, you can see again a dotted line indicating that these both the points are in the same line. So, this is a smart pick activated. And again, if you close here, the coincide constraint came. That is also smart pick. Okay. So, the color of the smart pick is in blue color and there is some more options like whenever you are drawing a line, if you want the cursor to get locked in this position, you can hold the control key so that whatever constraint is activated by the smart pick retains.

Even if I am pulling my cursor down, it's not coming because my control key is pressed. That means the smart pick constraint horizontally is activated. As soon as I release the control key, the line comes down. Okay. So, now, if I am drawing a vertical line and again, if I press the control key, the smart pick is activated. Even if I am asking it to come right side, it won't come because I press the control key. Now, similarly, if you don't want smart pick, you can hold the shift key.

Even if I am going in the horizontal direction, the horizontal constraint by smart pick will not be activated. So, these are some of the options which will help us. And so, when you are drawing some lines or something, by default, you can see that I have the constraints applied, the horizontal and vertical. If you don't want display of these constraints like horizontal, vertical or whatsoever dimensional constraints, you can click on this icon, geometrical constraints, display. We have to be a bit careful. We have one geometrical constraint here.

The same thing is also available here. So, this geometrical constraints is to apply or not when you are creating a sketch. That means, now, it is on and I have these constraints available along with the sketch. Now, if I turn it off and if I draw a rectangle, you see there are no horizontal and vertical constraints applied. That is because you stopped it. You said I don't want any constraints. Then again, I activate and if I draw something, again, I can see these constraints. So, this is to create the constraints.

This is to toggle the display of the constraints. So, if I switch it off, I will not be able to see the constraints. Similarly, if you have any dimensions and if you don't want to see those dimensions, you have the display over here. Suppose, I am having this dimension and like many dimensions, imagine that I am having many dimensions and I don't want to display these dimensions. I can switch off the display of the dimensional constraints by using this button. So, all your dimensions will be hidden.

Next. So, whenever you are trying to shift your workbench, always we are going from start and shifting my workbench. So, there is an option to add your frequently used workbenches as favorites. So, what I can do over here is I go to tools and customize. So, here you are having start menu. In the start menu, I am frequently using assembly design and I am using generative sheet metal design and I am using drafting. I am using functional tolerance and annotation and I am using part design.

So, these are my favorites. I added, click close. Now, you click on this corner button and you have your favorites displayed as icons. Suppose, if I wanted to move to FTA, I just click on this and I can see like my workbench has changed. Okay, this is how to add the frequently used workbenches into your favorites list.

Want the rest of Electrical wiring harness using Catia V5 & Electrical AutoCAD?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Electrical wiring harness using Catia V5 & Electrical AutoCAD course

The remaining 20 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Electrical wiring harness using Catia V5 & Electrical AutoCAD course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.