Unlock all 48 lessons of Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3DFull course ₹40,000 · paid
Building an InfraWorks Model from LiDAR, Imagery and GIS Data
A free lesson from Skill-Lync's Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Conceptually Designing a Road and Presenting it Week 1 Session 2”
What will you learn in this free Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D lesson?
The instructor creates an InfraWorks model with a coordinate system, then drags in LiDAR elevation files, SID aerial imagery, parcels, utility poles, a LandXML phase one road, wetlands and a floodplain KML. Contour intervals, styles and the home view are set, and the data is used to judge the alignment.
- Creating a model and choosing a coordinate system
- Importing LiDAR terrain and SID imagery
- Bringing in parcels, poles, wetlands and floodplain layers
- Setting contour intervals and a home view
What comes after lesson 2?
The next free lesson is lesson 3, “Laying Out a Preliminary Road Alignment in InfraWorks” (37 min). Later in Skill-Lync's Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D course (paid): lesson 4, Conceptually Designing a Road and Presenting it Week 1 Session 4; lesson 5, Introduction to Civil 3D – Examining the Civil 3D Interface and Settings Week 2 Session 1; lesson 6, Introduction to Civil 3D – Examining the Civil 3D Interface and Settings Week 2 Session 2. The full course has 48 lessons (25 h 23 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Welcome back and let's talk about InfWorx. So what is InfWorx? InfWorx, as I kind of mentioned briefly in the previous section, was it's a great tool that allows you to quickly and easily visualize an alignment, which would make a brand new road. It can also be for site stuff you can do. You can do parking lots. You can do all kinds of really cool stuff. And it has this really great kind of visualization like in the real world, basically design before you design kind of tool where you can see aerials, you can see your roadways, you can see other things.
It just makes it very easy to kind of lay out an alignment. And that's kind of the first thing that you do when you want to actually kind of present this to the public. You kind of have to get a preliminary alignment done first. In the old days, we would just do this in CAD, just regular CAD. And we would do a set of plans, which we're going to discuss here too, because sometimes that still actually does, you know, we'll talk about that in this section.
But for the most part, it's really, you know, nothing's better than a video or a picture, nice visualization where you can actually see how things are going to be affected and what you can, it better outlines what you can actually tell when you're in the public. Okay. So let's, let's talk about InfWorx. All right. All right. So as I mentioned previously, let's go ahead and just start this up. So I happen to have for this project, we have LIDAR, I have imagery. It's very nice and granular.
It's pretty good data. It's actually pretty darn close to existing ground. But if you don't have anything, what you can do is you just use this section here called Model Builder. So if I go to Model Builder, okay, what you're going to then do is you're going to navigate to the different parts of wherever your project is located. All right. So I'm going to go kind of over here. Don't forget, you can also just put that on Arial. And so let's say my project is kind of in this area here.
Okay. And it kind of encompasses this area here. So what you do is just look at these different parts. You can draw a rectangle to select the area of interest. That's what the AOI stands for. You can draw a polygon and you can also import a polygon, which would be a shape file. So if you had like an Esri shape file, you could bring that in. Most probably you're just going to pick a rectangle here. You're going to just drag your mouse. Once you're going to pick when you're done, you give it a name, give it a coordinate system.
So it's important you know it. If you don't, you can just use L84. It should transform it fairly well. That stands for LatLong84. It's an old coordinate system, but it's basically for the kind of the world. And you would just hit create model. And if you have BIM 360, which you're not probably going to have, you're going to actually just use a local copy of the file, which this is basically a SQLite file. I'm not going to do it right now because it takes a little bit of time.
But what would happen is once you've created an Autodesk account, which I have up here, I'm already logged kind of in in my account right up here. Okay. And once you logged in, as long as you have permissions to create models and stuff, you'll create a model. You'll get an email. And basically what will happen is it'll appear in the homepage here. So if I close this out, you see I've already got one created. Okay. Now, as I mentioned before with the model builder, though, it's okay.
It'll get you started. Whatever GIS data it has access to, it'll bring it in. So as you can see here, it is actually grabbing the road. Okay. And so as you can see, it's a little bit off. It looks a little bit off. So it does an okay job. It would kind of get you started. Honestly, I would probably delete this and just start from scratch. But one thing I wanted to show you is if you remember up here, there was a bridge with some pretty good relief as far as elevations.
But you can kind of see there's really – it's not even picking it up. This is pretty much flat. In fact, it looks like there's a hill here. So, again, this is not going to be the best way, but it'll work if it's what you have available. Okay. In fact, I'm just going to go ahead and delete this here. So I'll just delete model, and we'll delete it. So it's just kind of an interface. All right. So I'm going to create one from scratch, and we'll just give it a name here.
We'll call this one Praj1. And I want to work local, so we'll just kind of put in a default location. That's fine. I do happen to know the coordinate system I'm in, but if you don't, you can basically click on the button here, and you can choose where – it does every coordinate system in the entire world. So you can pick India. You can pick Japan. You can pick America. I happen to know the code for this one. If you know the code, you can also type it in.
So this is FL83-NF, and so I just type that in. All right. We'll go to model extents. If I do happen to have a shape file, I can define the model extents to that, or if I have some other type of geometry or something like GIS data, I can do that. I'm not going to bother. I'll drag it in as I need to, okay? We'll go ahead and click over here. We'll go to advanced settings. If you want to have a schema template, a database schema, we're not going to bother with that.
What's our user-defined coordinate system? Notice how it grabs it automatically. What are your design standards? If you pick over here, you can do metric or imperial. We'll pick Leo to metric. Which side of the road do you define on? What content do you want? There's different state kits down below here, and you can just pick the different state kits. I'll just grab them all. It's fine. And we'll just click OK here. And this will create a new SQLite file in our documents folder, okay? So the way this works is it's fairly kind of straightforward.
And all that you do is you basically go through wherever you have your GIS data, and you just drag it in. And that's the really nice thing about it. So I've got this one folder here called resources. I'm going to go ahead and grab in the LIDAR first. So remember I said I would talk about LIDAR now because, obviously, this is how we're going to see it. So I'm going to drag all these three here. You can do this all at once. I'll just drag them in.
The basic purpose is you drag in the data, and then you tell InfraWorks what that data is. So this is the type of terrain because it recognizes the file format is a TIFF. A TIFF, T-I-F, can either be imagery or it can be an actual DEM, digital elevation model. That's what that stands for, okay? And that's what we have here. All right, we'll just click close and refresh. And if you have nothing, it should zoom you right to that area. You want to be careful initially not zooming around too much.
Let me just show you how you zoom in here. So wheeling in and out, that's the mouse. That's all I'm doing here. Wheel in, wheel out. Then to pan, if you're used to AutoCAD, it's different. You right drag. That pans. To rotate the view, you left click. That rotates the view. As you can see, if you look at my cursor down here, it immediately gives me nice feedback as to what the elevations are. And you can see I already have a predefined creek, right? So, again, you can kind of see our job is kind of coming into play.
Now, I want – I have additional data here. So let's go ahead and grab each of these here. This is an ADF file, which is another form of LIDAR or digital elevation model. And we'll just click close and refresh. And we'll just say yes to this to categorize it. And this should be a ground surface. And I'll make sure that it's toggled on and then hit apply. That should basically bring it back up here. We'll hit OK. And, again, you'll see it kind of refreshed. Again, be careful zooming around to make sure you don't zoom too much out of the way because until you actually have some objects that you have in the model, it gets very hard to kind of zoom in around here.
Sometimes you kind of get lost a little bit. Okay. So let's go ahead and go back to this here. So I grabbed this one. That's 45681. We'll grab 45682. We'll grab this one here. And, yep, terrain and that. Close and refresh. It wants to know what to do with the layer. I'll say yes. It is a surface layer. You'll notice that it's immediately turned off. If I kind of click here, right, see if the light bulb's off, just toggle it on. Make sure you're kind of aware of that.
Hit apply. And this should kind of come right next to that one. And we'll click OK here. And let's just go over here. And we'll grab the last one, which is right here. Again, drag that in. Same thing. Yes. And we'll drag that down here. And toggle that on. And click OK. And as you can see, we're starting to get actual, you know, true surface data. And, again, this is pretty good accuracy because it is LIDAR. So that's one of the kind of the nice things about it.
You can kind of see a creek that's going over here. You can even kind of see our road somewhat. It's kind of coming over here. I'm going up this way, right? You can see a little bit of it. But, of course, we need to get a little more, you know, it'd be nice if we had the imagery. So right over here, I happen to have all the imagery. So I'll go to resources and I have images. And I'm going to select all of these. And I'm going to drag this all in right here.
You see how fast and easy this is. It's a really nice way of working. Now, those, let me kind of bring that back up here real quick. These are SID files. So when it comes to imagery in the world of CAD and GIS, et cetera, you're going to have, there's different formats. There's SID, S-I-D. There's TIFF, T-I-F. There's JPEG, JPG. So, but most probably you'll get a SID file or a TIFF file. Now, one thing to mention. With these, these are very new SID files. In other words, they're kind of compiled in the most recent version of SID.
You know, you should be asking yourself, well, how the heck does it know where to go in the real world? The way that it knows it with a SID file in the newer version, it actually saves the coordinates and the pixels, basically the size of that raster inside that SID header is where it's all stored. Okay. So you can just drag them in. Now, the older SID version is going to have what's called an S-D-W file. It's a world file. If you have that old format, you're going to have to.
And I repeat, have to have, I would have one S-D-W file for each of the SID files here that accompany it. It's got to be in the same exact folder. You cannot move it or won't find it in the real world. It'll go to zero comma zero. But the coordinate of that lower left corner of the image is stored in that S-D-W or that word file. With a TIFF file, it's a TFW file. Again, it's a text file. You could literally open up a notepad and then look at it, and it'll show you the coordinates of it, okay?
Again, these are embedded inside that header, so we're good to go, okay? I know the coordinates for this is F113NF. It's ground imagery. Again, you'll see here, it shows you that. You can go to raster here, and you can basically kind of tell what you want. There's not really that much additional information that it gives it, but these are aerials, so I'll click that here. And you have some additional things you can do here, but we'll just leave it at defaults, and then click close. And this does sometimes take a little bit of time to process.
All right, so now it's starting to kind of finish up. I obviously paused the video just so we could speed up some time. It took about a minute to do all this, okay? And as you can see, the really great thing about this is that it actually, you know, drapes it over the terrain, and this is actually, you know, so you actually know exactly where you are. So it's really in 3D. You can kind of see the elevation change here, and you'll notice that we have some contours displaying.
Now, while we're on that topic of contours, so again, you know, we could do a whole course on InfraWorks. It could be its own course, so probably a good two or three sections of video. So the goal is to show you the standard civil engineering workflow. So I'm not going to spend too much time on this, but I do want to show you some things. So first off, if you go to the engineering view here, right over here, if I click on this, you'll notice that I have a bunch of settings here.
So I can change the contrast of everything if I want it to be a little greener or whatever. I can change the intensity of the lights, right? You can kind of see that's all there. All right, you can change the brightness as well, so I want to be a little brighter or whatever, okay? And then if we go over here, we have some additional kind of, you know, tooltip type stuff. You want the view cube to display, automatic selection, things like that. Your status bar, edit mode is on.
And then if we go over here, you can see I can actually change the actual contours here, okay? So I can do what, you know, what labels per contour. I can show display elevation text. If I, you know, change this to a specific size, I can do that. I can also change the interval distance. So if I type in, let's say 10,000, you'll see immediately I see all my contours. Basically, it says if I go above 10,000, start to disappear. If I get anywhere below 10,000, show them.
So if you want to see the contours, sometimes it's nice to see that because you can actually see exactly where your lows are, your highs are, creeks are, et cetera, right? Remember that big creek? You can kind of see what's going on. Here it is right over here, right? And so, you know, you can see that very nicely, but sometimes they get in the way. So again, you can just change this. If you want to change this, as far as the interval goes, you can actually change your major interval to 1, and I can change my minor interval to 0.5.
And now I'm really seeing some granular contours, and you can kind of really see the way that the land flows. Again, it's just giving you the ability to do this. I'm going to change this back to 500, and I'll change this to an interval of 5 and 1. That's a standard kind of interval that you want. So we'll just do that, and now if I zoom way in, you'll start to see the contours, and if I zoom way out, they start to disappear, anything above 500 feet, right?
So again, it's nice to have them, but sometimes they kind of get in the way, so you don't really kind of care too much about them, okay? All right, so now what I want to do is I want to bring in whatever other data I happen to have in here. So if we go back to my resources folder, I happen to have the parcels, so I'm going to grab those parcels, and I'm going to bring them in. And if I look over here, so a little trick here, again, as of this video courseware, you might get tempted to bring those in as right-of-ways or parcels or where is it?
Yeah, parcels right here. Don't do it because I found a little bit of a – it's not a crazy bug, but it takes a long time. Your best bet is to make coverage areas out of these. They work just fine as coverage – because all you want to do is just a visual thing, all right? So just use them as coverage areas. They'll come in much faster. What's your location? Well, I'm not actually so sure about this one, so I can just try FLIDA 3-INF, hit close and refresh, and you'll see here in a minute, we'll get an error message that says, hey, this data contains source, usually this indicates that, you know, it's in a different coordinate system, and of course, it actually is.
I already know this. So the way that you research this, where I got these parcels from the website, I downloaded their metadata file. It's an XML file, and it actually showed me that it's in the GDL coordinate system. So I'm going to simply double-click this, and I can go right over here, and we'll click on this drop down here, and I already have it, but I can just type in – I could go find that. And then basically just kind of look around here, make sure this is set to drape.
That's good. What's the tooltip? You want anything? Nothing spectacular here. One thing you do want to check is this rule style. I'm going to just give it a funky one, so I'll just pick over here, and we'll just give it zoning, and we'll give it residential. You'll see here that's not going to be the best one, but it's just to give you an idea that it actually stylizes the data as it brings it in, okay? And so what this allows you to do is it allows you to kind of see it in a visual-type way.
Now, this default one that's going to come in, it gets pretty cumbersome, but you can already kind of see if I click on this, right, that's the actual parcel, right? This is the property line. This is great. This is exactly what we need to know, right? Here's our road, and we need to kind of figure that out, where things are going to go, okay? Actually, I take that back. The road's over here, all right? But you can kind of see this is not the best, right?
It's too bright. I want to see the actual area. I don't want to see this yellow, all right? So what you can do is you go to the content over here. You click on the style palette, all right? And I want to basically copy that style, so I'm going to find the coverage areas, and I'll go to zoning, and I'll click on this residential, and we'll just go ahead and click on this one right here, which is create duplicate. All right, so I'm going to call this one parcels, and once I do that, then I can go over here, and we can edit this, because I want to basically take away that shading, all right?
So I'll click on parcels. I'll click on this button right here, and we'll get rid of the fill style, so just click the X button there. I don't want it black. I actually want it to be like a blue, like blue, so we'll just pick blue. Hit OK, and then I want this to be about 10 feet wide. All right, again, this is purely for visual, so that we actually have it, and then what I'm going to do is I'm going to go back to my data sources palette here.
I'm going to go ahead and pick on this, and, you know, yeah, you can do them individually, but this is global. So I'm just going to go pick over here. We'll pick parcels. Click OK. Close and refresh, and now it'll just change it, and the arrows will come back nicely, but I can still see the parcels, so I have an idea, obviously, where we want to put the new road, how we're going to define the right-of-way, and all that good stuff, okay? And we'll just give it a second to refresh.
It should refresh that. Now, some of the other things we want to add, remember we talked about that utility pole, right? So the utility poles are important to have in there as well because we want to basically go weave in and out of them. So we went out in the field with a little GIS unit, and we just located the utility poles. This is before we actually have it surveyed, okay? So we actually grabbed that, and, again, it's going to be close enough. So I'm going to go ahead and just drag this in here, all right?
And then this pops up, and so what's our coordinate system? Actually, I'm sorry. What is this supposed to be? This is what's called city furniture. It's a weird name. That's just what it's called, all right? And I want to actually go in here, and I want to give these a style of like a utility pole. So, again, I could even do street lamp. It's not a huge deal. It's just something to give us an idea of what we want this to be. And let's see. I think I want building, city furniture, construction, energy.
And we'll pick on this one right here. This will be good enough, okay? We'll just use this transmission pole with transformer. What the heck, right? It'll give us something nice to see. So hit okay, and then we want to make sure that we're set to the right coordinate system. It is. It was stored in that shape file that we created. We do want to drape it to the surface, all right? And that's basically going to be good enough to hit close and refresh. And what's great now is we actually have the utility poles in our drawing, which is fantastic.
Like I was saying before, this is a really great way to now know, okay, we're going to pull the road this way if we can. We're going to basically kind of pull it out back this way. And if we can't, then we're going to hit some utility poles. It's just that simple. We're going to do our best to avoid those. But at least now we can actually see them, right? All right, so the next thing I want to bring in, okay, and this was given to us by, let's say, another engineering firm who did the design for the new road or the phase one of this road.
So they've already done that. And now what we want to do is we actually want to kind of bring that in, okay? So if we look over here, they have given us a phase one road, and they gave us what's called a land XML file. I'm going to open this up in Notepad++. This is another utility. It's free. I can't stress this enough. I write this down somewhere, make a note of this. When you get to the engineering firm you work for or whatever you do, download the software.
It is a fantastic piece of software. It's better than Notepad. You can see it actually recognizes XML format. It gives you line numbers. There's a whole bunch of really cool stuff. Just a little tip here going off on a tangent. If I hold the Alt key down and the Shift key down, I actually have column editing. You can see right there. You can't do that in Notepad, right? So just some really nice functionality that you don't have with regular kind of Notepad, right? So again, if you look over here, we basically have all the stuff that's in this XML.
We don't have to know XML language. I don't really care. It's fine. We'll just close this out. But I'm going to drag this in here. Now in that XML file, a coordinate system is already defined. You can see right here. Okay? What is this? It kind of recognizes that it's a road, and it should drape it. And then if you go to your location, it's already there. You can change it. You're not going to bother with a tool tip. Just click close and refresh. It already knows it's a road, and it should bring it in right at that location.
So here's a brand new road, and it ties in. And that's what if you look here. It's perfect. It actually is pretty dead on. It actually looks really good. That's that new road. It's perfect. Tied in here. Now, if you want to give it a certain style, you can do so by simply clicking on it. And if you look over here, I can actually, you know, click on this and we can make it look like a four lane or whatever. Again, this one here, if I check it, it's probably going to be pretty close. We don't have paved shoulders, but it's good enough, right? We just want to show a row that's going to tie into this road. If you want to go crazy and make it visualization, you could basically, you know, set this to a style where we actually see unpaved shoulders.
Cause that's what we have here. We have dirt shoulders. Okay. All right. So the next thing that we want to bring in, um, we go back to resources here is I want to bring in my wetlands and floodplains. So I already have a couple of things here. So I'm going to go ahead and drag in my shape file for my wetlands. All right. And basically this here, I want this to also be a coverage area. Um, and then we'll give it a style and we can go, you can do whatever you want. I can go to materials here. If I wanted to, I can do water.
And we can do this. I'm not going to do that. I'm actually going to, well, I want to leave it as a coverage area, but I'll, I'll just do this grass one for now. I may actually make it transparent at some point. Um, but for now we'll just do that. Click close and refresh. And then now we should be able to see, as you can see there, we're now starting to see our, you know, our actual, uh, wetland areas. Again, which is, it's just helpful to see what we might have to avoid the best of our abilities.
Now let's just talking as far as design goes, when this goes to actual like granular design, you're going to have a wetland specialist or an environmental scientist basically go out and they're going to locate wetlands with flags and the surveyor is going to pick them up. And when they survey this project, they're going to actually have the wetlands, the actual delineation. This is a kind of a gen, a global kind of location of them. This is actually through LIDAR, believe it or not, the, uh, they do it through satellites. They just check the, basically like the RGB, the heat that gives off certain parts of the land.
And it shows you it's a wetland. Uh, one of the other things that's a dead giveaway for a wetland, just so you know, it's not shown here, but, um, I'm just kind of showing this as a little tip. This right here, you see these kind of this lighter wood, this lighter wood, this lighter, and this lighter. Well, guess what? These are probably wetlands. Basically the trees are dying and that's why the vegetation looks like that. And this is probably all wet. That's a standard giveaway. And, and just, you know, there are a lot of wetlands. This county happens to be what I would kind of call a wet county where there's a lot of wet areas and stuff.
So it's a very wet area. So it's a wet county. So it, it, it, that's why there's a lot of wetlands. All right. All right. So that's the wetlands. Now for the, uh, floodplain, I actually happen to have a KML file. Okay. So I want to bring that KML file into here. Now I think if you drag, yeah, it doesn't actually, I'm pretty sure it doesn't actually work. Oh, it does actually this time. Okay, good. So it used to not. And I actually, let me, let me just show you how to do that. Let me just cancel out of this.
So if you look over here, uh, this is an old way. Basically what you have to do is go over here to add database source. And if you look, there are all kinds generic database sources that you can add. There's a whole slew of these. And this is what you used to have to do manually, but it looks like they, they fixed that functionality. Um, you could add DXF files, GMLs, you name it. And if you look over here there, here's the, uh, the, the KML is also in here, but let me just cancel that because that's actually working now.
So we'll just go ahead and just drag this in here. And again, it should recognize it. I hope it does. We'll see. And for this one, I'm actually going to call it a watershed area because it'll actually come in looking rather nice. So we'll just do this. We'll just do that blue. That works for me. Hit okay. And then geolocation. Uh, this is LL84. That should be fine. It'll, it'll figure out the coordinate system. We do want to drape it. So we'll go ahead and click on drape, um, and good to go. Close and refresh. And now I should see all the, and there we are.
And now we can kind of see them through. And, and that's why I like that. That's that, that blue is a, is a transparent. So I can still see the wetland areas in there as well. If I have to, again, you know, it kind of overlaps. It does make sense. A floodplain is going to overlap the wetland somewhere. Okay. And that's basically, um, you know, now we, we have all the resources that we actually, um, want to work with. Okay. All right. So now we're basically ready to kind of lay out a road. Now, one of the things about InfraWorks, I just want to kind of mention this.
It's a save as you go type interface, which is fantastic. I actually kind of liked that a lot. In fact, I sometimes with AutoCAD would do that. So basically it's, it's done for us. Okay. And then I can just go back in again. It's save as it goes. Okay. And again, it's pretty fairly, should be fairly quick to kind of pop back up here. And if I click on this right here, you'll notice that it just saves it. I don't, there's no save within SQLite. So in fact, within InfraWorks, in fact, when, if you crash, which I'm going to almost guarantee you probably will sometimes. Okay.
Just be aware of that. You are going to crash probably. That's okay. It'll save as it goes. Now, some little tricks here I want to show you is the first thing that you always want to do. The second you get your model, the way you like it with all the data in it. Okay. Um, this is what I recommend you do. I can't stress this enough. Right. Click here, set current view as home, because if you kind of mess up and zoom way out and you're out to lunch, you have no idea where you are. All you have to do is go back over here, click on home. Boom. You're back to where you were.
I cannot stress that enough. Sometimes you get lost because you've zoomed out accidentally too much, or you're over here and you can't figure out where you are. You just click home and you'll find out where you are. Some other little tips here. Okay. So in the data sources panel, you can't select your terrain or imagery. However, anything that's like city furniture or the, um, wetlands and stuff, you can select them. So right click here and select features. All right. And then what you'll notice up here is I can actually go to here and, uh, zoom to selected and it zooms right to it. So if you were out to lunch over here somewhere, you just do it that way. There's no zoom window, zoom to extents. I think that would be kind of nice. Um, but it's not there. Okay. And so basically that's what you want to do is just make sure you, um, kind of, you know, you can just, those are some tricks to kind of being able to zoom in or out. So again, before we lay this out, let's kind of look at this now. And now that we actually have the data that we're dealing with, we can make some preliminary kind of adjustments here or preliminary, not adjustments, preliminary assessments. Okay. Firstly, you'll notice that we have this utility pole right in the middle of our road. Well, we, we've done a field check and guess what? They were smart. They obviously moved this utility pole based upon, they knew that this second phase of the road was going to be completed. So this pole is way outside the limits. Um, that's okay. We're good to go. We're not going to worry about this one here. So we're going to tie into the existing here, the best, to the best of our ability. And we're going to basically stick holding the left side here. Now, while I'm looking at this, okay, I'm looking at this here. There's no defined right of way for this road. What that means, uh, certain States, that is what's called maintained right of way. The road is, is fairly, again, it's not very well traveled County. So the County did not deed a road. Okay. So the road is just basically, it's just maintained right of way. But what I mean by deed it is, if you look over here, you'll see there is a very defined right of way. This is a state road. If you were to measure this, it'd be a hundred and I think it's 120 feet. So this is a state defined right of way. They purchased this right of way and they actually, you know, it's, it's now on the county or the state system. Again, if you look over here, this is what's called maintained. You see the parcels of, but the road pretty much, this is what's called the section line. It's actually going right, right along the section line. So that said, we know for a fact our property is actually, you know, our property line is actually this. Now the maintained right of way will might deviate into that and that's okay. But what I'm getting at is we, especially since utility poles are on this side of the road already, we don't want to have to acquire more right of way than needed. So what we're probably going to do is we're going to actually use the maintained right of way on this side of the road. It's probably actually over here.
It's where the county maintains it, where they mow the lawns and so on and so forth. And of course, the utility poles are actually in the maintained right of way. They wouldn't put the utility poles anywhere else because then of course, you know, it's not getting mowed. The, the utility company won't have access to it and so on. So we're going to basically do that. We're going to hug this part here. Then we're going to basically, there's nothing we can do over here. We're going to have to actually fix this curve. We're going to have to go over here and we have to tie back in now that this might actually work out well for us because we're going to tie back in over here and we can snake in between these poles here. Okay. Uh, then we're going to do our best, but I think we're going to nip this utility pole here. There's nothing we can do about that.
We don't want to, we have to tie back in here. There's a culvert here and we have to make sure we tie back into that culvert because there's a wetland. We don't want to do wetland impacts. Now I'm noticing that this utility pole or this utility line is fairly close here. We might nip this one, but if we can get it around here and then we can stay on this side, we'll then be able to kind of hold this edge here and keep holding it here. And then here's that place where 107th is coming in, right? And we have to tee in. Basically we're going to snake our way all the way through here, holding this side here. And then we're going to basically have a tangent that comes in here and then starts to curve all the way into, yep, we're going to affect this wetland. We don't have a choice into this area here. Now on this side of the road, we'll note, we noticed that these utility poles are in this side. So we're going to, and we all see the parcels on this side. That's, we're going to hold this side here for now. And then notice how, for whatever reason, it crossed the road up here. So that's okay. We'll do what's called like a big, little bit of an S curve. It'll be a straight curve where no super probably will be.
And we'll basically turn, you know, twist that road, twist the alignment back over here. We're on existing here. So we don't have to worry about getting a pond. It's a pretty straight way over here. Again, you can kind of see how it's working. Twist that way. Right. And then we'll maintain that for the most part. Yeah, there we go. So now it crosses again. So again, we'll stay on this side of the road as best we can for the most part. We'll just, you know, that way we're not having impact. And then we might, this looks like a really tight area here. We may be able to sweep this arc, really long, big arc here, all the way through here to get back on this side here.
That way we don't want to avoid, we avoid the utility line. And again, we may be nipping this one or we may be nipping this one. But again, the point is to minimize the amount of impact to those utilities because we actually know that that costs about $5,000 to $10,000 a pole. That's expensive if they have to move the whole line. Then basically we're going to come over here. We know that this over here is that bridge culvert. We have to tie into that because we're going to be doing this box culvert here and we have to tie into the top elevation.
Again, at this stage though, not a big deal. We know we have to follow the horizontal and we're going to do our best to kind of show some sort of profile. But we're going to have to wait for survey to get this actually really granular. But again, we'll just hug this side here and then tie back into we can kind of see where that pavement patch is. And again, if I want to turn these off, you can turn them off too. If I go to the layer content here and I can turn off the watersheds real quickly.
All right, I can just turn that off. Whoops, let me turn it off. Hit apply. And then now I can kind of see my area. Whoops, let me turn it off. There we go. And hit apply. I can do the same through the wetland. And again, you can get a better idea of kind of seeing where that pavement patch is and it's right up here. So that's where we would kind of tie back into. Okay. And so, again, that's kind of basically how we're going to set out the preliminary alignment.
And, of course, while we're doing that, we also have to take into account super elevation. But we're going to take a break. And when we get back, we're going to actually talk about that. And we'll actually start laying out the alignment and talk about super elevation as it relates to that as well. We'll be right back. Thank you.