← Course overviewFree lesson 1 of 3 · lesson 1 of 48Next lesson →

Unlock all 48 lessons of Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3DFull course ₹40,000 · paid

Price & syllabus
Free lesson · 26 min · no payment

Road Design Standards, GIS Data and Project Constraints

A free lesson from Skill-Lync's Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Conceptually Designing a Road and Presenting it Week 1 Session 1”

What will you learn in this free Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D lesson?

The instructor explains design standards, with examples from Florida and the Indian Roads Congress, then shows GIS data in QGIS and Google Earth. The lesson defines LiDAR and walks through a school-bus road reconstruction, covering a deficient curve, wetlands, floodplain, utility poles and ponds.

  • What design standards specify for a roadway
  • GIS shapefiles and KML files in QGIS and Google Earth
  • What LiDAR surface data is and its limits
  • Wetlands, floodplain and utility poles as design constraints

What comes after lesson 1?

The next free lesson is lesson 2, “Building an InfraWorks Model from LiDAR, Imagery and GIS Data” (32 min). Later in Skill-Lync's Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D course (paid): lesson 4, Conceptually Designing a Road and Presenting it Week 1 Session 4; lesson 5, Introduction to Civil 3D – Examining the Civil 3D Interface and Settings Week 2 Session 1; lesson 6, Introduction to Civil 3D – Examining the Civil 3D Interface and Settings Week 2 Session 2. The full course has 48 lessons (25 h 23 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hey, everybody. Welcome to Section 1 of the Designing a Roadway Project Using InfraWorks Civil 3D Map 3D course. We are going to be talking about conceptually designing a road and presenting it. So what we're going to cover in this lecture, we're going to talk about design standards, and then we'll talk about what is GIS and how we can use it in a civil engineering workflow. We'll also discuss what is lot of data in case you have access to it. We'll also talk about the scope of our project so we get an idea of how to actually do the design.

And we're going to use a product called InfraWorks to lay out a preliminary alignment. It's a great little tool that allows us to quickly and easily visualize the conceptual kind of concept of what we want for our road. Then we'll go over how to create a video using InfraWorks, and we'll go over just a quick and easy way of creating a set of plans for a local government meeting using Civil 3D. All right, so what are design standards? So design standards are basically it's the criteria that is used to design a project.

It can be used to design a site. And obviously there are many, many different government agencies, departments of transportation, municipalities, state, city, you name it, all kinds of different design standards that you will actually have to use to design a project. Just to kind of show you a few examples of that, here I've got for the state of Florida, if you're in the U.S., basically what they call standard plans. And, of course, this website is chock full of all the different kinds of standards that you would ever have to do to basically equate what you would do for their design standards and then basically use it in the software.

And that's the whole main purpose of understanding design standards. This is a crucial part of, you know, when you get done with engineering school, it's great to learn all the math and all the things that you'll learn. But this is where kind of you're going to actually have to go to if, let's say, you want to learn about super elevation. So let's say you have a low-speed highway. You will click on this link here. And up comes up a nice set of details that will explain to you how you define super elevation.

And there'll be other different, you know, locations such as, like, design manuals and so on. Another example is this manual on the design standard specs for expressways by the Indian Roads Congress. And, again, just perusing this, you know, this document, you will be able to understand and know exactly how you should define the different aspects of a project, a roadway project. So what's the horizontal alignment? What's your minimum radii for specific design speeds? What super elevation rates do you need to apply to the different radii?

What's your vertical curve criteria? What's your stopping site distance? And so on and so forth. So, again, it's really important to have a good grasp of design standards. And, of course, when you go and finally find a job, this is exactly what some of that company will tell you is, hey, we follow these design standards for this type of project. We are working in this county. We're working in this municipality, working with this local government agency. And these are their design standards. So every agency will typically have their own set.

Some local agencies will actually basically go to the main ones because they don't have an engineering kind of people. You know, they don't have engineering people within their organization, within the city. And so they will just basically say, hey, if you follow state standards or the government standards, that's good enough for us. OK, so, again, it's really important to have a good grasp of design standards as you're going to use this throughout your use of design. What's great about the software is, of course, as you can imagine, many agencies will provide a state kit of some sort that will actually integrate very nicely right into the software, whether it's Civil 3D and Autodesk or Infoworks, whether it's Bentley and Open Roads, where they provide template files for different types of templates and so on and so forth.

So typically, the agencies will actually provide their own set of standards, OK? All right, so let's discuss what is GIS and how we can use it in the civil engineering workflow. Let me just kind of minimize PowerPoint here. So I want to show you a free utility. This is a free tool. We're not going to spend a lot of time on it, but it's called QGIS. It is a free piece of software. You can download it anywhere in the world. And if you've ever heard of a company called Esri, they make a full-blown suite of GIS, geographical information system.

That's what GIS stands for. And basically, they provide a full-blown set of tools, this company called Esri, but you have to pay for that, whereas this QGIS is freely available. In fact, a lot of universities throughout the world will develop all these cool little add-ons that you can do all kinds of really amazing stuff with QGIS. It's a really fast, robust kind of GIS system or GIS software that allows you to leverage any GIS data. So what is GIS data? Well, GIS data can be many different things.

It's basically things like I want to see all the parcels for a county that I'm working on. I want to see all the utility poles in the area that I'm working on. I want to see the roads. I want to see imagery, et cetera. So that's what GIS really is. And where you use it in the civil engineering workflow is many different locations or many different aspects of it. So, for instance, you know, I've got a full set of county shapefile here. SHP is a shapefile.

As you can see within a few seconds, I mean, this is a pretty large county. And I am now looking at all the different parcels or the latest and greatest for this year. I think it was 2012. But it's just it gives you an idea. And especially when you're doing conceptual design, if let's say I'm doing like for the project we're going to go discuss here in the lecture, is we need to do basically like a reconstruction of a dirt road. And the main purpose is to also fix the deficient horizontal curves because we have buses for schools that will be using this road a lot.

OK, it's going to be upgraded. And so we need to upgrade the road so that the buses can handle the curvature and so on and so forth. And so you want to what's going to happen is we know we're going to have to acquire property because this road again, I'll show it to you on Google Earth when we get there. But basically, we know we're going to have to kind of acquire property. So you want to minimize which properties you take. You also want to minimize the cost, things like utility poles and how much that's going to cost to have to replace those or to move them.

Every, you know, state, local agency, et cetera, is different as far as cost goes. You know, so for instance, here, I've actually got these here and I'll just kind of bring these in. And I'll just hit OK here. And you can see I got the utility poles all on our project here. So this is where our project is going to be. And, of course, we'll go over this in Infoworks. And that's the great thing about Infoworks. I'm showing you this additional product because I want you to be aware of it.

In the real world, it's a fantastic product to quickly and easily kind of see GIS data really easily, just, you know, very nicely. And then, basically, you're going to leverage it within the civil engineering software. But I just want to kind of just kind of mention it to you. It's a really great little utility. I'm not going to save anything here, but I just want to kind of show that to you guys. All right. So what is LiDAR data? All right. LiDAR data, I'm not going to go into in great detail just yet, but you'll see it when we actually bring it into Infoworks.

LiDAR data is actual surface data that will typically be flown by government agencies. You're not going to be able to access this everywhere in the world or everywhere in your country. It can be limited because it's quite expensive to actually – they literally will fly at a certain elevation above their land, and they will literally get ground data. They can also pick up things like utilities if accessible through the LiDAR or the laser. It's a laser that's shooting down, picking up millions of points, and basically creating a surface for you.

But we'll discuss it in this workflow in case you ever encounter it so you know how to deal with it. It's a great little thing to have because it allows you to kind of really see preliminary your elevations and to get a profile and so on, so you can actually really make some good decisions with what your ditches are going to look like or if you need a pond in specific areas and things like that. So luckily for the project we're going to discuss here, we do actually have a lot of data, and we're going to actually leverage that to basically make our model.

So if you don't, there are ways that you can actually get the data or get a model information or surface elevations using InfraWorks to something called Model Builder. It's not as accurate. It's going to be within probably five to ten feet accuracy, if not more. But it gives you an idea of kind of where your lows are, your highs are, so you can define preliminary, again, it's conceptual design right now, what you're designing and where it's going to be. All right, so let's discuss kind of the scope of our project here, okay?

And, again, the assignment is going to be very typical to this. And, of course, I'll show a little video when we get over the assignment to kind of give you, you know, guide you in the right way. But for this project here, basically what we have is you can see from this typical section, and a typical section is just how the road will be laid out. This is a cross-section of the road. We have two 12-foot lanes. We have some six-foot shoulders. Again, we're not going to get very granular with the sod and all this kind of stuff here.

We just want to get the basic layout of the road because we're going to apply it to InfraWorks and to our actual project, okay, as we create the data. We also want to ditch, in most cases, we obviously want to carry that water to the low points where they are in the project here, okay? And one of the things I will actually show here is let's actually open this up in Google Earth. Again, Google Earth is another free utility. Again, depending on where you are in the world, you'll have many different resources that you can actually, you know, leverage within Google Earth.

Google Earth uses what's called a .KML file or a .KMZ file. So if you see those file types, you can open them up freely in Google Earth. And just to kind of give you an idea of what I've already kind of got here, I've actually already got something called the floodplain shapes, and we're going to bring that also into our InfraWorks. But just as an example, what you can do in just Google Earth alone, I have many hydrology engineers I've seen that just – they just use Google Earth to get reports.

It's actually a very quick and easy way to get stuff done. You get some aerial imagery of where your quick things that you can actually display, and for them, that's actually good enough. But just to give you an idea, so over here, I've actually got the Wetlands as a shapefile. Again, SHP is a file format proprietary to Esri, that software company I was talking about, the GIS software company, but it's used throughout the GIS world. It's basically like a, it's a standard de facto file format. So if you see a shapefile, you can bring that into not only QGIS, which I just showed you, but you can also bring it into Google Earth here, and I'll just say yes to this template.

I actually already have one created, but you can create a template, and you'll see here when I toggle this on, these are all the wetlands, and I got this from the National Wetland Inventory, and this is in the United States. These are the resources. Again, we're using GIS. We're leveraging GIS as resources that we want to actually use to make better design decisions. That's why we're actually doing this. That's why we're getting or acquiring all this data, because it's going to help us in making better design decisions to lay out the road, figure out where we really want the road to be, to minimize extra money that's going to cost for construction, as well as extra costs in the acquiring of right-of-way, depending on if right-of-way is necessary.

Again, in the real world, it's kind of rare that you're doing brand-new projects where you have 150 feet of right-of-way for the whole thing. So it's going to be something you actually have to kind of think about, okay? So again, Google Earth is basically a really nice little tool that you can use to very nicely see, you know, aerial and an aerial kind of way your whole project, okay? So this is basically our project here. I'm just going to show you what we're going to be working on.

This project is actually complete. So this is phase two that we're working on. So phase one actually kind of ends around here, around this stream, all right? And just to kind of give you an idea, you know, again, I could also bring the utility deposit. I'm not going to do it again because we're going to bring it into InfraWorks so we can better visualize it. But what I'm just trying to show you is this is a dirt road, and they actually did drive this road. So we can actually kind of see that this is a dirt road that they now need because of the way the county needs to kind of – they closed off all the different schools in the area, and all the school, the entire county is going to school here.

So as you can see, a bus – two buses going down this road is not going to cut it. In fact, this road would just be demolished within probably a month, if not less, okay? So this just gives you an idea of what we're dealing with. Not a very large right-of-way, so we know we're going to have to acquire right-of-way. As you can see, some of the things that we also have to take into account are the utility poles, all right? You can kind of see I've got some utility poles right here, and that's a large expense as far as if you have to move them.

So, again, you don't make these decisions willy-nilly and just say, oh, just slap this road here. There's many different aspects of design that you take into account. So, for instance, what I'd probably do initially starting is I would take a look at the utility poles and say, okay, typically a utility company will run the power lines down one side of the road, and then if they have to, they'll cross the road, or they might have other, like, service poles that will go across the road to access or to service a customer, you know, basically a resident, okay?

As you can see here, this utility line is actually on this side of the road, which is a good thing. We're probably going to basically hold this line, and then we'll hold to the right side, and let me, it'll be a little faster if I just kind of exit the view here. And then at some point, it's going to actually probably cross the road. Again, we'll visualize this a little more when I have, we look at it in InfraWorks, and so we'll then kind of, you know, transition the alignment to that side.

One of the other things you have to worry about is this right here. So this is a deficient curve. There's no way, government agency has required that this road be designed at a speed limit of 45 miles an hour. Now, what we've also done is we've done traffic counts. So we know for a fact that per those traffic counts, it's not a very heavily trafficked road. It will increase because of the buses coming in, and we had a traffic study actually done that gave us the numbers that we can then design to.

It's a pretty small county, so here's a school area. It's not going to increase that much, but we do want to have some ability to, you know, increase the growth of this road so that the more cars that will travel on here, you can kind of see it's a pretty rural area, a lot of trees, not many residents here. But again, you still have to take into account a possibility of growth, especially with the school coming in this location now. So again, these curves will have to be fixed.

A bus cannot go down this navigating this at 45 miles an hour. And we'll show you where those, I'll show you where those design centers are so you can kind of have an idea what your minimum radius needs to be and what the super elevation needs to be as well, okay? One of the other constraints is we have the, you can see this big green here, and you see this blue, and you can imagine what this is. This is a little creek. We also have this creek going around this way here.

So this is a wetland. So one of the things that you really want to do in a major way is avoid wetlands at all costs. Wetland mitigation is a very expensive and time-consuming task. And it will require that the agency who is actually trying to basically, you know, design this road, you'll actually have to go to the federal level usually to get what's called wetland credits. Basically, whatever wetland you take up per specific criteria, like how much cubic yards of fill are in there, what's your square foot or square or your acreage that you're taking up of a wetland.

And then you do what's called mitigation. You can either buy points. Basically, you can buy a wetland in the same basin. That's much harder to do, though. And what they would do is basically actually do wetland mitigation where they would say, okay, we're going to make a new, if we're taking up this amount of acreage here, we're going to make a brand new wetland over here or something like that or somewhere else in the county as long as it's within the same basin. That's the key thing that they want to make sure that you do, okay?

So these are things you have to think about when you're designing your road. So, of course, luckily the utility poles are on this side. So we're going to kind of push this road up here. And we're probably going to have a pond. When I fix this road, I'm going to have to have a pond. There's just no way around it here. We fix this curve, we're going to be off the alignment. When you're on an existing road, you do not typically, again, every agency is different, but typically if you're on existing or somewhere on existing, you don't have to be exactly on it.

As long as like your shoulder is on existing, you don't have to add or create a pond because your impervious area, which is your pavement, basically, that's what impervious means. It doesn't have to be treated. Usually they want to treat water quality. Think of all the oil and the things that come off of cars, et cetera. And they want that water that's on a brand new part of road to go into a pond. A hydrology engineer will design the pond. It'll go into a pond. And then during an event like a hundred-year storm, you know, very heavy rain, that pond has to hold all that water and then treat that water and then outfall.

Basically, the orifice or the hole where the water comes in and then goes out into the wild or into the woods cannot be any different than if it were raining today with no brand new road. That's what the control or the flow has to be. And it's not the purpose of this course where to show you how to do that. That's a whole other topic. That could be its own course. And basically, you have to do hydrology design where you basically get all your different areas of soils and impervious areas and so on.

And you define different basins and that you take in whatever water is needed into that pond based upon the area of impervious area and all that kind of stuff, okay? Again, that's a whole other topic. We'll just kind of go through the process of making a pond so you guys have an idea of doing that. But somebody who's more experienced will probably do that for you. And then they'll say, hey, you need a two-acre pond for this amount of impervious area, okay? So that's one of the things we're going to have to do here.

And one of the other things is we do not really want to affect this stream. It's a pretty – you can see it's a pretty well-defined stream. So when I do actually come in here and take the road to a much larger radius, I'm going to have to tie back in here. So that's going to create something like an S-curve. We have to make sure that our super elevation, which is based on a certain rate, it's coming into super. And we'll go over what super is in a little bit here in this example here.

And then basically when the super runs out, I actually want to make sure it runs out and then it can run back in to the different parts here again. So, again, this is just the scope of our project. Here's another wet area. So, again, if we can avoid this, we will. If we can't, we won't. In fact, I can almost guarantee right now we're not going to be able to avoid this because guess what? The client also wants this to be a nice one row. They do not want this 90-degree stop.

That is not a very good design. And so this is going to be an actual fixed curve. So, again, minimum radius based upon design speed of 4 to 5 miles an hour. And we're going to basically then tie this in. We're going to tee this into that new radius. And, yes, it's going to affect this here. There is no way around this. We're going to be affecting this wetland here. Okay. And then basically we just straighten out. We have another wetland. Not a wetland. I'm sorry.

The green is wetland. The blue is what's called the floodplain area. And for the floodplain area, that's a whole other topic. What you actually need is basically you're going to have to do what's called a compensation. If you are in fill within the floodplain area, if you think of the floodplain area, think of the floodplain area as a glass of water, okay? Imagine you all of a sudden take a whole bunch of dirt and you dump dirt into this floodplain area. This floodplain area cannot increase in size.

It must maintain this size or this shape. That's what basically the water management districts have defined it as. And so if you start adding a whole bunch of dirt in here because you're in a lot of fill, you're not doing any cut, then you're going to increase, you're going to basically taking ice cubes and throwing them into the cup. What happens when you add ice cubes? Well, your water increases and that water will then spill over and the area of your floodplain will get larger. And so what you sometimes have to do is develop a floodplain compensation pond.

You basically figure out the volume of fill that's coming into the floodplain and then you say, okay, I'm actually filling 5 or 20, 30 cubic yards of fill. I now need to make an equivalent pond. Basically, you're literally going to take out and cut a hole in the earth and that amount of actual cubic yards and that's what you're going to take out. And then it's literally a dry pond. It can't be under your season high water table. So it's at least a minimum of one foot above your season high water table.

So you actually need what's called a boring to get different depths of where your season high water table is, the water table, and what soils you have. So you can design that pond properly. And the same thing, by the way, happens with ponds in this area here as well as this area here. So we're going to have ponds here for sure because we're going off the existing road, okay? And again, just looking here, we might have an issue here as well. But we can shift that alignment actually over here to the right side so it won't be a problem.

But then if you look over here, we got a serious floodplain going on. And that's because this whole area is a big low. That's actually, if you look at the elevations, if you look at Google Earth here, you can kind of see elevations, which is nice. So if I hover over here, I'm at 97. If I come back up, 96, 96, pretty flat. But as soon as I come up here, see, it's 105, 110. So we've got this low area here that we know is going to be an issue.

And, of course, as you can imagine, if we have a low, that usually means you actually have – I'll just rotate the view here. You can actually see there's actually a bridge. And we need to actually replace that bridge as well. We're actually going to do a box culvert through there. Nothing spectacular. In the later sections of the course, when we actually do modeling, we're going to actually just do a 3D model here. And I'll show you how to project that. And so we're not going to do bridge design.

And basically, we're going to tie back into this pavement patch right there, this location of pavement. Okay. So that's going to be kind of the scope of our project. Okay. All right. So, again, these are the things that you actually have to do to actually – you know, before you even think about laying something out. You actually need to – you know, you have different criteria. You know, if I look here, one of the things that I'm also going to have is some issues over here with residences.

Right. I've got a residence right here. In fact, let me just toggle this off here so we can kind of see this. All right. We've got a residence here and if we put a road that comes up all the way over here and we have to have a pond, well, we might be cutting off our resident from getting to the main road. So we've got to kind of think about that. Maybe we're going to have a drive that kind of comes in here and tees in over here.

That's probably our best bet because this part of the road is going to be closed. The other thing, too, is, you know, once I have that road, the road is going to come this way here, right, and then it's going to come back down this way. Well, you know, instead of me making a pond somewhere else all over the place, wouldn't it be nice to have some way to use, to reuse this land so the county or the agency doesn't have to buy new land because they're going to have to buy the land anyway.

Once this road is laid out over here, this is basically called dead area, dead space. They're going to have to pay this property owner for his land or her land over there because they can't have less than an acre or two. They can't develop on it. Now, again, if the property owner wants to keep it, they can if they really want to, but basically it's kind of a dead area. So, again, these are the things you have to kind of think about. We've got some residents here and there's really nothing over here, so we're good over here, right?

We can just kind of put that in and everything will be fine. And then we have some basic, you know, residents over here. We've got some intersection design that we're going to have to do. We have to obviously tie in. So there are constraints that you have to think about as well. You're going to have side roads, right? You can't have the road raised or lowered too high because you've got to tie into the existing road. So there's an intersection there, and we have an intersection here as well.

And, of course, one of the main intersections is going to be this one over here where we're – whoops, I went too far – where we actually have this road coming in because we're going to now tee off this one here. This whole road, although this one's called 107th, this one's called 55th, we're going to actually have to basically go in. And this is going to be all 55th now, and this road is going to end right at this here. It's going to tee in over here.

And that's just something else that you'll have to kind of discuss with the county as well, okay? So, again, scope of project is very important. You'll also – you'll usually get a report of some sort from the district or from the agency that says, hey, this is what you have to do, the number of lanes that you were doing, it's reconstruction, and so on. All right, well, let's take a little break here. And before we get into the inforcs to the auto-primary alignment, we'll just take a little break, and then we'll come back and do the next section in Section 1.

Want the rest of Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D course

The remaining 45 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.