← Course overviewFree lesson 1 of 3 · lesson 1 of 72Next lesson →

Unlock all 72 lessons of Design of Power Converter with PCB OverviewFull course ₹40,000 · paid

Price & syllabus
Free lesson · 7 min · no payment

Introduction to Switch Mode Power Converters and Applications

A free lesson from Skill-Lync's Design of Power Converter with PCB Overview course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Design of Power Converter with PCB Overview lesson?

Introduces switch mode power converters, also called power electronic converters, and why the field has so many jobs. Covers applications in solar and wind energy, electric vehicles, data centers, laptop adapters and motor drives, built from MOSFETs, diodes, inductors and capacitors.

  • What switch mode power converters are
  • Why renewable energy needs power electronics, including maximum power point
  • Applications in electric vehicles, data centers and motor drives
  • Why adapter heat shows room for improvement

What comes after lesson 1?

The next free lesson is lesson 2, “From Linear Regulator to Your First Buck Converter” (15 min). Later in Skill-Lync's Design of Power Converter with PCB Overview course (paid): lesson 4, Week 2 Session 2; lesson 5, Week 2 Session 3; lesson 6, Week 2 Session 4. The full course has 72 lessons (23 h 0 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, everyone. So today we're going to start talking about the topic of design and simulation of power electronic converters. This first video is going to cover introduction to switch mode power converters. So what we are hoping to learn here is what are switch mode power converters, what are the applications of them, why do we need to use them, and how to get started in this field. So the first thing that we would like to check is what are the applications of switch mode power converters, why is that a big topic nowadays, why are there a lot of jobs and there is a lot of industry built around the design and the simulation of switch mode power converters, or in a more generic term, power electronic converters.

So first off, you're going to see that renewable energy is one big reason why. So when you have solar panels, when you have wind energy, when you have batteries, a lot of these systems rely heavily on power electronics. Battery management systems, how to charge or discharge a battery, green energy in general, a lot of this relies heavily on power electronics, as we're going to see. Another huge application nowadays is electric vehicles. Electric vehicles are getting more prominent, and they're getting a bigger share in the market nowadays than just a few years ago.

And that plays a big role in the boom of the power electronic industry. So all of that, it requires building power converters. These power converters, as you can see here in these photos, they are built of MOSFETs, diodes, inductors, capacitors, control, digital control, analog control, a lot of things going into the design and the simulation of a power electronic converter. What we're going to be trying to do here is to try to cover that and to cover how to properly design and simulate a power electronic converter.

So briefly, what are some of the main application or some of the booming applications in the power electronic industry? You're going to find, as we said, renewable energy, because when you're connecting a solar panel to your grid or to your load, whatever it is, you're going to need for sure to have a power electronic converter between the solar panel and the load. Whether that load is your electric grid or that load is just a standalone load or it's a residential load, in all of these scenarios, in all of these cases, we're going to need to use power electronic converters.

Because as we've known about solar panels, they can work at a different variation of power and IV performance points. And what you would like to do with solar panels is to make sure that they are always going to be working at their maximum power point. And how can you do that better than using a power converter that can control that for you? Same thing exactly applies for wind turbines. When you have a wind turbine, you want to make sure that you are extracting the maximum power that you possibly can from your wind turbine.

Electric vehicles, between the electric vehicle battery and the motor, there is a power electronic system, what is also called the motor drive system. So that's why other application is the electric vehicles. Another big thing is data center applications. Now, our data centers nowadays are processing much more power than they used to. They are processing powers with hundreds of watts at very low voltage level or even at higher voltage levels. But to process all of that power from your grid to the point of load or to the low voltage applications, you need a set of power electronic converters that is going to do that for you.

And the efficiency of the power electronic converters became of great importance because of this high amount of power of this high current losing 1% of efficiency giving is going to cost millions of dollars. So that's why proper design and proper simulation and understanding how to use power electronic converters can play a huge role and can be a great asset for future engineers. Another thing is power supplies in general, and that's some more generic topic. So, for example, your laptop, what powers your laptop is a power supply.

So you connect your laptop through an adapter to the electric grid. So what's inside this adapter is converting AC power to DC power in order to charge your laptop. Another thing is your smartphones or any phone that you are charging. You are also going from an AC system, which is your electrical grid, into a DC system, which is your phone at 5 volt or whatever the voltage of your phone battery is. And to do that, you're going to need to design a proper power electronic converter.

And this field is not saturated. If you hold, look at your laptop when you are charging it, try to hold the adapter, you're going to find that it's quite hot. What does that mean? It means that there is dissipation of power. We are losing power in form of thermal energy. And as long as you can still feel that your adapter is hot, that means that there is still room for improvement. And that's, of course, beside all of the other topics that we talked about, such as renewable energy and electric vehicles.

Also, motor drives. Whenever you want to drive a motor, you would like to drive any kind of motor, whether inside a vehicle, inside a truck, or for a factory. When you are running assembly lines in a factory, all of those are relying on motors. And to be able to drive a motor from a battery, for example, then you are going from a DC system to an AC system, which is most probably most of the motors are running on AC power to be able to drive a certain load.

So all of these kind of applications bring power electronic converters to the center of the future engineering market in the U.S. and across the globe.

Want the rest of Design of Power Converter with PCB Overview?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design of Power Converter with PCB Overview course

The remaining 69 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design of Power Converter with PCB Overview course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.