Free · 3 lessons · no paymentDesign of Power Converter with PCB Overview: 3 free lessons
Three free lessons from Skill-Lync's Design of Power Converter with PCB Overview course. They introduce switch mode power converters and their uses in solar, wind, EVs and data centers, show how a switched MOSFET leads to the buck converter, and begin buck converter analysis with circuit drawing, current directions and voltage polarities.
Last updated 16 Nov 2026 · 3 free lessons (32 min) · full course: 72 lessons (23 h 0 min), paid · ₹40,000
Free lesson 1 · 7 minIntroduction to Switch Mode Power Converters and ApplicationsWhat will you learn in the free Design of Power Converter with PCB Overview lessons?
- Where switch mode converters are used in industry
- Why a fully on or off switch wastes little power
- How a capacitor, inductor and diode make a buck converter
- Assigning current directions and polarities correctly
Free lessons you can watch now
Lesson 1 · 7 minIntroduction to Switch Mode Power Converters and ApplicationsIntroduces switch mode power converters, also called power electronic converters, and why the field has so many jobs. Covers applications in solar and wind energy, electric vehicles, data centers, laptop adapters and motor drives, built from MOSFETs, diodes, inductors and capacitors.
Lesson 2 · 15 minFrom Linear Regulator to Your First Buck ConverterUses a 100 volt input and a 50 volt target to show why a MOSFET switched fully on or off is efficient but gives a pulsing output. Reviews resistor, inductor and capacitor rules, then adds a capacitor, inductor and diode to arrive at the buck converter.
Lesson 3 · 10 minBuck Converter Analysis: Drawing, Polarities and Operating ModesRevisits the inductor and capacitor rules, then begins analysing the buck converter in two stages. Starts with drawing the circuit, writing average values, and assigning current directions and voltage polarities consistently for the on mode and off mode.
Which lessons of Design of Power Converter with PCB Overview are free?
The first 3 lessons are free on Grow by Skill-Lync: 32 min of video from Skill-Lync's Design of Power Converter with PCB Overview course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 69 lessons are listed in the outline below so you can see what each one covers.
How long is the Design of Power Converter with PCB Overview course?
The full course has 72 lessons and 23 h 0 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 32 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid Design of Power Converter with PCB Overview course on Skill-Lync, with mentor support and a certificate. For a career in Embedded & electronics, the PG Program in Embedded Systems for EV Applications goes further with industry projects and placement support.