Lesson finished
Up next: Benchmarking Cars: Customer View and Design Engineer Case Studies
Unlock all 25 lessons of Automotive BIW Design and Development Part 1 using NXCADFull course ₹40,000 · paid
Vehicle Development Stages, Car Platforms and Top Hats
A free lesson from Skill-Lync's Automotive BIW Design and Development Part 1 using NXCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2 Vehicle development process”
What will you learn in this free Automotive BIW Design and Development Part 1 using NXCAD lesson?
The instructor walks through four stages of vehicle development: pre-design, design engineering, development engineering, and start of production, sales and marketing. It then splits a car into chassis and body, and explains car platforms shared across models, top hats, and the advantages and disadvantages of that practice.
- Four stages of the vehicle development process
- Benchmarking and carryover study in pre-design
- Chassis, underbody and upper body split
- Car platforms, top hats, and their trade-offs
What comes after lesson 2?
The next free lesson is lesson 3, “Benchmarking Cars: Customer View and Design Engineer Case Studies” (11 min). Later in Skill-Lync's Automotive BIW Design and Development Part 1 using NXCAD course (paid): lesson 4, BIW components and materials; lesson 5, Week 02_Session 01 NXcad Basics-1; lesson 6, Week 02_Session 02 Curves and Surfaces. The full course has 25 lessons (8 h 30 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hey guys, welcome back to another session on Automotive Body Inverte Design. Today we will be exclusively discussing the vehicle development process in detail. We will discuss what the vehicle development process is, the different stages of the vehicle development process, a brief on each stage, the activities carried out in each stage and their importance. We will also discuss in brief about the chassis, the body, the car platforms, the top hats, their advantages and disadvantages. We see a lot of vehicles on roads every day. These moving creatures aren't made as a whole unit directly in a single step.
From the ideation of concept, to the designs on paper, from the creation of prototypes, to the products on the roads, a vehicle takes a lot of time and it undergoes a number of stages in the development process. Each and every step in the development process adds value to the vehicle and it is mandatory for a design or a manufacturing engineer to have a clear understanding on the vehicle development process. The process can be broadly classified into four different stages. The process starts with the pre-design and development stage and it is followed by the design engineering stage and the development engineering stage.
The last stage in the vehicle development process is the start of production, sales and manufacturing. Let us discuss each of these one by one. Pre-design and development is the very first stage in the vehicle development process. It is very evident from this name that the stage is carried out prior to the designing process. All the necessary research work and the collection of information required for the designing are made in this stage. This stage can be further divided into different phases like benchmarking, concept preparation, carryover study, and other phase of benchmarking.
You must have come across the term benchmarking, right? Benchmarking is a process of establishing standards. This is done by comparing the products of a company with the similar products from the competitors. So, why do we want benchmarking here? We all know that a product or an improvement in a product is made when there is a need for it. So, before deciding to develop a product, a wide inspection or marketing analysis for the same should be made. This is carried out in the first phase of the benchmarking and it is done by the market team.
This tells us the present demand for the product in the market, the aspects that have to be improved, the competitors on field, their products with their pros and cons, the feasibility of the product under study, etc. All this data received from the research and analysis helps the manufacturers to get a rough idea about the project. Once the initial benchmarking phase is completed, the concept presentation phase follows. During this phase, a conceptual idea for the product is created and this entirely depends on the conclusions from the benchmarking phase.
The segment of customers whom we will be targeting, the suitable target market for the product, the target volume and the type of vehicle which suits for this are finalized in this phase. This helps us to elaborate the product features in the further stages and to check the capability of the organization to meet the demands. The next phase in the pre-design and development stage is the carryover study. This is an analyzing phase where the parts of a vehicle of previous models are studied and check whether it can be used in the new project under study.
As we know, a vehicle is made of thousands of parts and a number of subsystems. And it's not like we are going to modify each and every part. Therefore, the parts which are not under study and the ones which are not in connection with the parts or design under study can be obtained from the previous apparent models. In carryover study, the list of parts that can be carried over to the new car is made. This can give us a tentative design of the product that we are working on.
The last phase in the pre-design and development stage is again benchmarking. We have almost got an idea of the rough conceptualization of the design from the previous phases. In this second phase of benchmarking, the components of the vehicle are compared and evaluated with that of the competitor's product. This comparison contributes a lot in improving the quality and performance of the product. Once the analysts feel that there is no possibility of further improvements, the conclusions are submitted to the design department. With this, the pre-design and development stage is completed.
The next stage in the vehicle development process is the design engineering phase. This stage is a designing stage where the design for the part or the product is created based on the research and analyst data received from the previous stage. This stage involves several levels of CAD designing followed by finalization of its design. In the final level of CAD designing, sheet preparation for the design concept is made. This design conceptualization will give us number of parts required, the materials required, its dimensions and the process suggested for manufacturing the products.
This acts as the base level over which the further construction of the design will be made. Following the first level, the further levels of CAD designing are carried out. In the next levels, the complete design of the parts or the assemblies are created. These parts and the assemblies are tested on various bases. If the results of the tests demand a change in the design or assembly, then the changes are made in the next levels. And this continues until no need for further changes is observed. The need for changes is driven by two major factors.
One is by the interaction of the part with its surrounding members. That is, the design part should not affect and interfere in the geometry and functions of its neighboring parts if it is not required. The other factor is the changes demanded by other departments like production, simulation and collision crash. These departments ensure the made product or assembly has no problems in manufacturing, in performing its role and it does not cause unwanted damage during collisions. Once all these departments approve the design and no more need for improvement in design is noticed, the next step is finalization of the design.
In this phase, final design for the product is freezed and the suppliers are asked to come up with requests for quotation and for manufacturing. This phase ends after finalizing with the suppliers. Development engineering is a third stage in the vehicle development process. The conceptual design in the papers are converted into real-life models in the stage of development. Similar to the design engineering stage that has a number of levels of designing followed by the finalization of the design, the development stage also has levels of prototype testing followed by finalization of the product.
Once the design is finalized, the tools for manufacturing the prototypes are produced. In the first prototype test, the car is built for testing the production and the assembly line. This test indicates if there is a need for modifying the production and the assembly line and it ensures flawless flow in the production process. Once the production and assembly layouts are fixed, the second prototype tests of building cars are carried out. This trial run is made for checking the design and to make sure it is in proper dimension, geometry and surface finish.
If the prototype produced is not in compliance with the design made, then suitable changes in operation sequence and plant layouts are made. Also, this stage modifies the layout for making the movement of materials from the suppliers and products to the market easy. After fixing this, the prototype is finalized in the last stage. This is followed by taking all the pre-production measures and this stage ends before the actual production of the parts start. The last stage in the vehicle development process is the start of production, sales and marketing.
The actual production of the concerned products is carried out in this stage. Even though it gives us the final output, the development process does not end here. It requires further follow-ups from sales and marketing to check if it is in the right way. Customer feedback is taken into consideration and score from the GDP test must be taken care of. Lower the score, better the customer satisfaction. This score should be checked and made as low as possible for the products that will be produced in the immediate future.
With this, now let us move on to discuss a practice widely used in the automotive world to reduce the cost of the vehicle development process. As we know, a vehicle can be classified into two major assemblies, the chassis and the body. In brief, the chassis is the basic framework of the body where all other components of the automobile are added. Whereas, the body is a structure mounted on the vehicle to make it complete. Both these assemblies are made of a number of components. Let us separate this into more specific terms.
Chassis is a self-propelled vehicle by itself as it has the powertrain assembly on it. Powertrain consists of an engine, clutches, gearbox, propeller shafts, universal joints, differentials and axles. All these together transmit the motion from the engine to the wheels. The chassis also has a number of components like steering, suspension and electrical systems. Body of the automobile can be divided into underbody and upper body. Underbody is a structure added to the chassis to fill out the spaces and to cover up the components. This underbody is further divided into front end section, rear end section, floor pan, cross members for seat assemblies, etc.
Upper body is a structure that forms the passenger and rear compartment of the vehicle. It can be further divided into two as interior and exterior. Let us say we are going to design a new product. If each and every component of the automobile is to be product specific and demands unique features, then it has huge cost and demands an infinitely longer time to complete the vehicle development. To improve the cost effectiveness of the vehicle development process, manufacturers came up with a different idea. Instead of making product specific parts, they decided to manufacture standard parts and assemblies of the components which can be used for certain range of products.
That is a product series that can have the same choice and location of engine, powertrain, chassis including the underbody. However, the design may also incorporate certain specific systems. The common set of designs and assemblies shared by a series of vehicles is said to be a car platform. A car platform is such a structure that can accommodate a different structure. range of car bodies. Like the same platform that can be used for making sedan, coupe, SUV, convertibles, etc. The different upper body structures that can share the same car platform are known as top hats. Let me give you an example for this. Nissan has a car platform named Nissan MS Platform. The same platform is used for the SUV Nissan X-Trail, Minivan Nissan Serena, the hatchback Nissan Pulsar, and a sedan Nissan Bluebird, Sliffy G10.
Using this type of car platform and top hats have so many advantages. First and foremost one is the reduction of cost of the vehicle development. Using the same parts will establish standards and ensure good quality. Also, the inventory and the purchase cost of the materials can be kept low. At last, the manufacturer can easily decide what model he has to produce. But this technique has disadvantages as well. A designer will not have full freedom in designing as the platform of the vehicle is fixed and the components cannot be varied easily.
The similar model products will eventually end up in the lack of interest of buying among customers. Also, it results in greater loss in case of platform failure as many vehicles share the same. So that's it for this video guys. We have discussed the different stages of the vehicle development process, what they are about and what is being done at different stages and their importance. We have also seen about the chassis, the body and how they can be incorporated as car platforms and top hats, the advantages and disadvantages of that practice.
We will meet up in the next one. Until then, bye.