Unlock all 25 lessons of Automotive BIW Design and Development Part 1 using NXCADFull course ₹40,000 · paid
Vehicle Architecture, Subsystems and the Three Car Safety Zones
A free lesson from Skill-Lync's Automotive BIW Design and Development Part 1 using NXCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1 Vehicle architecture and three zones”
What will you learn in this free Automotive BIW Design and Development Part 1 using NXCAD lesson?
The lesson explains product and vehicle architecture, modularization, and the chassis and body subsystems from engine to electrical systems. It then covers the crumple zone at front and rear and the rigid crash proof zone, using Newton's laws to show why extending stopping time lowers impact on passengers.
- Vehicle architecture and modularization
- Chassis and body subsystems of a car
- How crumple zones extend stopping time
- Role of the rigid passenger safety cell
What comes after lesson 1?
The next free lesson is lesson 2, “Vehicle Development Stages, Car Platforms and Top Hats” (12 min). Later in Skill-Lync's Automotive BIW Design and Development Part 1 using NXCAD course (paid): lesson 4, BIW components and materials; lesson 5, Week 02_Session 01 NXcad Basics-1; lesson 6, Week 02_Session 02 Curves and Surfaces. The full course has 25 lessons (8 h 30 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hey guys, welcome back to the session on Body and by Design. This is a session about vehicle architecture and the three different zones of a car. Under vehicle architecture, we'll be discussing the need for studying architecture, product architecture, vehicle architecture and on what basis architectures are validated. We'll also cover the assemblies of the vehicle with the different types of subsystems. After discussing this, we'll get to know about the different zones of cars, why we need different zones, what crumple zones are, it's hidden, history, functions, the role of crash-proof zones and also how these zones help in ensuring the safety of the passenger. Let us start with the vehicle architecture. As we know, automobile manufacturers are continuously driven for improvements due to global competition, increasing customers' demand and stringent regulation norms. This drives them to develop products with more individualistic, variant and higher technical systems. But to the changes and improvements need any prerequisites or prior knowledge, The answer is yes. An automobile is made of thousands of parts and a number of systems. Each of these systems has functions to perform both individually or in combination with the other systems. The whole system is highly complex and so, before deciding for a change, the basic structure of an automobile has to be understood clearly.
Understanding vehicle architecture enables the designer to fulfill the diverse requirements within the given range of time and cost. Therefore, we have decided to learn something about vehicle architecture today. We can develop a product when there is a need. A product can be thought of as a physical setup that receives inputs to give us the desired output. That is, they perform the desired function. The overall function of the product can be divided into several sub-functions and the same way the physical layout can be divided into different sub-units to accomplish them.
An architecture defines how these individual systems perform their role and their mutual interactions. This product architecture is applicable to the vehicle as well. A vehicle architecture explains the physical layout of the vehicle and defines how it performs its required function. Each vehicle has its own architecture. But vehicle architecture is not limited to one particular vehicle. That is, the same vehicle architecture can be used within the same product series of a vehicle. The idea behind using product series architecture is to improve the economy. A vehicle architecture has a standardized product specific architecture, product specific platform and product variant characteristics.
The act of simplifying the complex system into individual systems is called modularization and the individual subsystems are said to be modules. Modular layout allows common path strategies throughout the product series and reduces the variance. They also allow reuse of the existing modules, adding new modules by combining the modules for decreasing the cost of production and development. With this brief introduction to vehicle architecture, let us discuss the different systems of an automobile. Every automobile is generally considered to be made of two main assemblies, the chassis and the body.
A chassis is a basic framework of the vehicle on which all other components like engine, clutch, gearbox, power shafts, joints, axles, steering and suspension systems are mounted. In other words, a chassis comprises all the major units that are necessary to propel the vehicle. Whereas the body is a superstructure placed on the chassis to make it a complete structure. Now, let us discuss the various subsystems of an automobile. We have an engine and its associated systems. Transmission system, steering system, braking system, suspension system and the other electrical systems.
Let us discuss all these one by one. The engine is the power source of the vehicle. The internal combustion engine in automobiles converts the chemical energy of the fuel into mechanical energy by burning it inside the combustion chamber. The piston, connecting rod and crank shaft are driven by this energy and they move the vehicle. An engine should have four basic systems to ensure its proper operation. They are cooling system, lubrication system, fuel system and ignition system. The engine is provided with a cooling system that circulates the coolant to remove the excess heat from the engine.
This avoids overheating of the engine and prevents its seizure. The cooling system can be of air cold or water cold type. Also, the engine has a lubrication system for lubricating the parts of an engine to avoid friction and wear between the components. The lubrication system is of three main types. Mist lubrication system, dry sump lubrication system and wet sump lubrication system. Then we have a fuel system that stores and supplies an adequate amount of fuel into the engine. Early automobiles used carburetors and mechanical pumps to inject the fuel.
Modern systems use electronically controlled injection systems which have greater efficiency. Then there is an ignition system that produces a spark to ignite the air fuel mixture. This produces timely sparks in the correct sequence for ensuring the proper operation of the engine. The most common ignition system includes the battery coil ignition system, magneto ignition system, capacitive discharge ignition system and transistorized ignition system. In addition to these, an exhaust system and starting system are used. The exhaust system collects the exhaust gases from the engine and delivers them into the atmosphere.
This also comprises the turbocharger, catalytic converters and other emission control devices. Moving on, we have a transmission system. This system transmits the motion from the engine to the wheels with the help of a number of intermediate linkages. It consists of clutches, gearbox, propeller shafts, universal joints, differential and the wheel axis. All these individual units have their very own functions and they together make the transmission system serve its purpose. Next we have a steering system. The system helps the driver to take over the directional control of the vehicle.
The rotational input given by the driver to the steering wheel is transferred to the steering column via the steering rack. It is the front wheels that are steered whereas the rear wheels follow them. The next one is a braking system. The braking system is used for slowing down or to stop the motion of the vehicle. They absorb the kinetic energy of the wheels and dissipate them as heat or store the energy in some cases. We have mechanical, hydraulic, electric, vacuum and pneumatic brakes. Then we have the suspension system.
The wheels and tire assemblies are attached to the frame of the vehicle via the suspension system. This system offers a smooth ride to the passengers and prevents them from vibrations by absorbing and dissipating the energy. Also, it improves the stability of the vehicle and maintains the geometry between the frame and the wheels. Then we have the electrical systems. The role of electrical systems is continuously increasing in all modern vehicles. They have a wide range of applications like lighting the vehicle, air conditioning, infotainment applications, starting, ignition and signaling systems etc.
This may also include the modern electronic components added on to improve the performance of the vehicle. As said, all these systems are mounted on the chassis. Even with this setup, the chassis alone can be a self-propelled vehicle. But we do miss another important part that is the body of the vehicle. A variety of body styles can be attached to this chassis according to the requirements to make it a complete structure. However, in modern vehicles, the chassis and the body are together built as a single unit.
Automobile bodies are made up of a number of sheet metal elements. They must provide sufficient space for the passengers and lockages. They should hold other elements of chassis in their position. They should also improve the aerodynamics of the vehicle. Most importantly, they should offer the utmost safety to the passengers. The body can also be divided into different sections like the front body, side panels, roofs, doors and closures. The design of all these components should facilitate and improve their role. Once a vehicle architecture is fixed and finalized, it should be validated in various disciplines.
This includes the crash, stiffness and strength, ride and handling, efficiency of the system, thermal management, noise, vibration and harshness and passenger protection. That's it for vehicle architecture. Now let us move to discuss the different zones of the car. Over the years, there have been vast improvements in the design of automobiles in terms of safety. One such important innovation is the manufacturing of cars with three different zones. A car is usually divided into three zones. They are the crumple or crash zone at the front, the crash proof zone at the middle and the crumple or crash zone again at the rear.
The crumple zone both at the front and at the rear end of the vehicle are weaker and they'll get deformed during collision. Whereas the crash proof zone in the middle constitutes the passenger area. This is a rigid structure and is isolated from the impact of the collisions. Let us start with a very basic question. Why do we need different zones? Although modern vehicles have anti-lock brakes, traction control systems, automatic emergency brakes and electronic stability control, they are to be driven by humans. And so, there are possibilities of errors.
In other words, accidents are unavoidable. So, the designer should consider even the least possibility of mishaps and design the vehicle in such a way that it offers utmost safety to the occupants. This safety can be accomplished by manufacturing the vehicle with three different zones. Let me explain this with a simple case. You might have learnt Newton's laws of motion in your school days. Newton's first law of motion says an object or a body will continue in its same state of motion in the same direction unless it is acted as an object.
Let us say we have a car with a body made of completely rigid material and is about to have a collision with another rigid body like a wall. Though the car travels at a very high speed, it stops all of a sudden when it hits another body. But the passenger sitting inside the vehicle will remain in motion at the same speed of the car because of inertia. This may end up in a fatal injury. Also here, the impact gets transferred to the occupants which should be avoided.
So what are we supposed to do now? This is where the crumple zones come into play. As the name says, the crumple zones are structures specially designed to undergo deformation and crumple. The crumple zones at both the front and rear position undergo controlled deformation by absorbing and dissipating the energy during collision. You may wonder why we should design a car with a zone specifically to get crushed. And how does this help in improving the safety? Before moving on to answer these questions, let us discuss the history of crumple zones first.
The concept of crumple zone was invented by an engineer, Bella Baranay, who is regarded as the father of passive safety in automotive design in 1937. This concept was first partially inducted in the Mercedes-Benz Ponton in 1952. In this design, the passenger's cell is made from more rigid material than the front and rear sections of the vehicle. The Mercedes W111 Tailfin Salon of 1959 was the first vehicle to employ this idea completely. It was designed with deformable crumple zones and a rigid passenger compartment. So, what does the crumple zone do? A crumple zone or a crash zone has two main functions. One is to reduce the impact of the force during collision and the other is to redistribute the force, preventing it from reaching the passengers.
Now, let us see how this crumple zone reduces the impact of force. A moving object exerts a kinetic force. According to Newton's second law of motion, force is the product of mass and acceleration of the body. As we know, a moving body has a constant mass. So, the force depends on the acceleration of the body. Higher the acceleration, higher the magnitude of force. So, what should we do to reduce this force? Should the vehicle be stopped all of a sudden? Actually not. Since acceleration is the rate of change of velocity, decreasing the speed of the vehicle at a faster rate will eventually result in higher acceleration.
Therefore, the time for speed reduction should be prolonged for a while to reduce the impact. In this clip, you can see a car that is about to hit a wall. If the structure is of rigid material, the collision results in an immediate stop. Now, let us see what happens if the car has a crumple zone. The deformable crumple zone extends the time taken by the vehicle before it comes to a stop which results in lesser impact. A crumple zone usually acts as a buffer region surrounding the passenger compartment for reducing the impact of force during collisions.
Let us say the kinetic energy during collision is lesser than the elastic energy of crumple zone material. In this case, the material compresses by absorbing kinetic energy during the collision and then releases it back like a spring making the situation worse. This collision is called elastic collision. To avoid this, the crumple zone is made of usually low strength materials. Even here, the energy absorbed during a collision has to be spent on something, right? If not, it will definitely be a threat to the safety of passengers.
Some amount of energy is released in the form of heat due to friction, sound during collision and some goes along with the parts that get detached from the vehicle during accidents. But most of the energy is spent in deforming the crumple zone. That is, we are saving the life of passengers by sacrificing the life of cars. Crumple zone may consist of frames that are designed to bend or collapse at certain areas during impact. They can also be made from specially engineered materials to absorb the energy.
The crumple zone is usually made of materials like steel of low grades, aluminum, carbon reinforced plastics or energy absorbing foams in some cases. These materials offer good strength at normal conditions but get deformed, crumpled or crushed during the collision because of the impact. Here, the energy gets consumed in bending the frames and fenders, damaging the body panels, stripping of the sheet metal or by shattering the glasses. As the energy is completely spent on deforming the crumple zone, it is prevented from reaching the passenger compartment. But what if we build a vehicle that is entirely made of crumple zones? As said, the main aim of having a crumple zone is for the safety of the passengers.
But making the whole vehicle out of this will eventually result in counter effect. And so the crumple zones are located at both the front and the rear side of the vehicle providing safety to the passenger cabin. Crush proof zone is also known as a safety cell or safety cage where the passengers are seated. This is made of rigid materials like high strength steel that will not deform easily. This cell also employs more beams for increased strength. The crumple zone isolating the passenger cabin from the intrusion of forces during collision makes it less prone to damages. In addition to this, seat belts and airbags also aid in safety.
This image shows the strength of material at different regions of the car. You can clearly see that crumple zones at the front and rear ends are in yellow color indicating those areas have lesser strength. Whereas the middle passenger compartment in red is comparatively stronger. What you are seeing now is the performance of a crash test. It is clearly evident that the frontal crumple zone almost gets destroyed whereas the passenger cabin stays unaffected. I think we are now clear on the different zones of the car. The design of the zones of the car vary based on the mass and size of the vehicle, stiffness of the material used and the stresses that act on the vehicle.
The design also varies depending upon the vehicle type. For example, race cars are more prone to accidents than passenger cars and so due consideration should be taken while designing the vehicle. Also, sufficient space is available for crumple zones in large cars, making the design easier. Meanwhile, in smaller cars, the design is complicated. So that's it for this video guys. We have discussed what a vehicle architecture is, the need to study it, the main assemblies of a vehicle, its different subsystems and the validation of the architecture.
We have also learnt about the different zones of cars, the need for having different zones, the history and functions of the crumple zones, what a crash-proof zone is and also how these zones help in ensuring the safety of the passenger. We will meet up in the next one. Until then, bye.