Lesson finished
Unlock all 54 lessons of Analysis and Design of RCC & Steel Structures using Tekla Structural DesignerFull course ₹40,000 · paid
Property Sets, Construction Levels, Grid Lines and Input Drawings
A free lesson from Skill-Lync's Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Planning structural layout and introduction to TSD Week 1 Session 3”
What will you learn in this free Analysis and Design of RCC & Steel Structures using Tekla Structural Designer lesson?
The instructor creates property sets such as B1 and B2 for beams, defines construction levels (foundation, ground floor, intermediate and roof, about 10 m in total) and models grid lines by several methods, including a rectangular wizard and DXF import. The lesson ends by looking at an industrial workshop drawing with a portal frame and cranes.
- Creating property sets for beam groups
- Defining construction levels and storey heights
- Grid line methods: parallel, perpendicular, rectangular
- Importing grids from a DXF file
What comes after lesson 3?
Later in Skill-Lync's Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course (paid): lesson 4, Planning structural layout and introduction to TSD Week 1 Session 4; lesson 5, Planning structural layout and introduction to TSD Week 1 Session 5; lesson 6, Modeling of the industrial Steel Structure-Part 1 Week 2 Session 1. The full course has 54 lessons (18 h 48 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
After the design settings, we will have to move to the Manage Property Sets. Under the Manage Property Sets, we will create some property group for our column, beam, or whatever other elements we have in the model. And then we will assign these properties some values like the grade of steel or the property sizes. We will then use this property set to assign this property to the elements. Say we have 10 beams in our model. We want to divide the 10 beams into two types, B1 and B2. So we will create one property set called B1 and we select the beams that will fall under the category B1.
And similarly, we will do this for B2. So this will generally, in our projects, what we do is, we assign few members the same size. Say for primary beams, we assign one size. For secondary beams, we assign another size. So this way, we will differentiate the properties before starting the model. Let's check in the model how it is done. In the model, we have to go under the Home tab. And select Manage Property Sets. Here. So under the Property Sets, we will define the properties of similar beam, columns, and other options. This we will do somewhat like this.
We will select New Members. Say Steel Beam. Then we will rename it here. Say B1. Then we will check the properties here. We will select the grade. We will switch off this auto design because we don't want to do auto design. We can change the member property from here. So all these we will go in a bit more detail while we do the modeling. So once we do OK, it will save the properties. Now let's move to the basics of grade and construction levels. So what are construction levels? Construction levels are basically the level that we define in a model.
As a structural engineer, we will generally follow the grids as per the input drawings. The spacing of the grids can be regular or they can vary as well. Apart from the input grids, we might need to add some additional structural elements. This kind of grid is known as construction lines in Tekla. We will need to draw the grids or we can input the grids from the input drawings. So apart from the grid, we will need to define the construction levels in the model. Construction levels are required to define the number of stories in the building and also the spacing between the floors.
So let's go to the software and we will explore how to do the grids and construction levels. To define the construction levels, we will go into model option. Under the model option here, the first we can see is the construction level. So we will click on this. Here we can see there are a few options here. Okay, base. Base is basically the foundation level. We will change the name here. You double click on this one and we will try as footing or foundation. DOF means the top of foundation.
Let it be zero level. Okay, then insert above. We want to insert a level above this foundation level. So let's go here. In the reference, we will write as GF means ground floor. DOF, we will change to top of steel or slab structure levels. Let's go to top of slab structure levels. Here we will define the spacing from the foundation to the ground level. Let us define this as 3.5 meters. You will see it will take this level as 3.5 meter. Here. We want to add another level.
We go, we do another insert above similar like that. Let us write here RF means roof level. This one, let us assume as top of steel. We give it a level of say 5 meters basic. So this is how we define various level. Now, if we want to insert a level between ground and roof. What we need to do is we go and select ground floor. We insert above. We write the level name as intermediate. This one also we select as top of steel. Then from ground to intermediate, let us give a gap of say 3 meters.
So this is around 6.5. Then we check whether from the intermediate to roof level is correct or not. Let's say we want to change it to say another 3.5 meters. So this is our final structure level of about 10 meters. So now we do OK to save. So after defining the construction levels, we will model the grids. To model the grid, we will first select the plan view. So let's go to this project workspace area. Under the project workspace, you select the first icon. That's the structure.
Here you will see the levels indicated here. The grids can only be modeled in plan view. So let's select any of this grid. Let's select ground floor. You will see this ground floor window is open here. So this one is this window right now is in 2D ground floor. Now to model grid, let's go under model tab and here grid line. If you click this grid line, you will see there are various options of modeling grid lines. So let's select the first option grid lines. You click anywhere, any point in the window and we will move here.
Pick some point, pick point 2 and there is our first grid. So here after the first grid, we press escape to get out of this mode. Now let's go back to the grid line option. Here you can see there are few other options called parallel, parallel quick, perpendicular, rectangular and import the Excel. So we will explore the other options for the grid modeling as well. Let's select the parallel option. So we can select this as the reference line here. Then we need to specify the distance.
To specify the distance, you can press F2 and then edit this value. So let's give a spacing of 5 meters. Press enter. So you have to pick the first point. Then have to pick the second point. So there it is, our second grid. Now press escape to exit this mode. The next option is to parallel quick. So for parallel quick, you select the reference line again. This time, you just give the dimension. Edit this dimension, say around a 5 meter and press enter. And there it is, our grid line.
Escape. So these are the first three useful grid line modeling method. Next is perpendicular. So this is grid in one direction. We will need to model grids in the perpendicular direction as well. To do that, let's select this perpendicular. Now it's asking for the reference line. So we take this line as reference. We need to pick up a point. This point is the grid starting grid point. Now let's pick one point for the point here. We go until this point. Let's pick point two. There is our first grid.
Now same to similar like the previous options. We can do parallel and quick parallel to these grids to model the rest of the grid. Let's try that one. Quick parallel. Let's select this reference line. If a dimension of the seven meters. See another dimension of four meters. Four meter will be from the first grid. So let's give another here. Okay. So escape. So this is how our grid line looks. So we will model our grid lines in both directions using these three types. Another way of modeling grid lines is using the rectangle.
Okay. Before. There. So we want to explore this as well. Let's just delete this grids and clear out. Let's explore the next option using the rectangular wizard. So we need to rename the grid here. We just we can rename here. The tick mark here means this grids will be replicated in all of these flows. So let's go to the next part. The origin of the position of this grid. Let it be in the 0 0 position. Okay. All lines means this grid will be created on both directions. And dashed all. Let's select the solid type line. We will go to next. So in X direction, how many number of grids we want? We will do 4 grids here. The length of each grid grid to grid spacing is 6 meter. So next in Y direction, let us consider 6 grids as well. And grid to grid dimension as 4 meters. So we are not doing any rotation for the grids. Here same as well. Let it be at 90 degree. So finish. See, we can see how our grids here. Let's check the dimension of the grids.
It's 6 meter. Let's check the dimension of the other side. It's 4 meter. So this is what we input also. So press escape to get out of this mod. Okay. Next option is to import a grid from DXF. So basically DXF file is when we say we can save the AutoCAD file in another mode called DXF. Then from that DXF, we can import the grids into this software. We will explore some of that. Let's go to the DXF then. Before we move to the DXF. Before we move to DXF, let's clear this grids first. It will be easier to model. Delete all. So now we will go to the import DXF option.
So to import DXF file, we will select import DXF. Then let's select our DXF file from here. Open. We will select this shadow form. Then we change the units to meter because we will model and meter. Then you click finish. So here you can see the shadow of the grid, but it helps in creating the grids so that we don't have to go back every time and refer to the drawings and see the drawings to see, to check the dimensions of the grid, the spacing of the grid.
Okay. This we, once we can, once we import the shadow, we can just model the grids over here using the grid line and parallel grid line methods. So this is one way of modeling the grids. Let's escape. So we have, we now know the basics of modeling the grids and the basics of modeling the construction lines. So these are the first few steps we will follow to generate the model. Now, next we will take an example of an industrial steel building to modeling tech lab. Now, whenever we work on a live project, the first thing we need to focus is on reading and understanding the input drawing.
We should always understand the purpose of the building and arrangement into the input so that we can plan and design our elements accordingly. We should also study the drawing so that while planning the column and beams, we don't end up clashing with major components of the structure. Let's take this example of an industrial steel building. This is a ground floor of the building. This is the first floor of a building. And this is a typical section of the building. So when we have an input drawing, we have to make sure that we have enough detail to start our work.
We have enough sections to know the level differences, to know where are your main openings are so that we can plan accordingly. So from this section, we can see there are basically two levels. Then we have a portal frame and we have crane supporting arrangements as well. So now let's go back to our ground floor level. This is the ground floor plan of the industrial shed. So industrial shed are most of this building. What is the purpose of this building? This building is a workshop. So we will have some machinery coming inside here for maintenance. So we see.
And there will be some offices around this building where the people working in this workshop will leave or will work from. They'll have you have a pantry, you'll have state cases, you'll have toilets. And on the top, we have a crane. One, two, three. And there are 24 studios. And there are 25 ways.