← Course overviewFree lesson 1 of 3 · lesson 1 of 54Next lesson →

Unlock all 54 lessons of Analysis and Design of RCC & Steel Structures using Tekla Structural DesignerFull course ₹40,000 · paid

Price & syllabus
Free lesson · 20 min · no payment

Tekla Structural Designer Interface and Design Settings Setup

A free lesson from Skill-Lync's Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Planning structural layout and introduction to TSD Week 1 Session 1”

What will you learn in this free Analysis and Design of RCC & Steel Structures using Tekla Structural Designer lesson?

The instructor introduces Tekla Structural Designer as a modelling tool for analysis and design of RCC and steel structures and tours its ribbon, project workspace, properties window, scene view and loading list. The lesson then sets model settings before modelling, including metric units, the Indian Standard code, first order analysis, bar sizes and covers.

  • Interface: ribbon, workspace, properties, scene view
  • Choosing metric units and the Indian Standard code
  • First order analysis setting for simple structures
  • Reinforcement bar sizes, spacing and covers

What comes after lesson 1?

The next free lesson is lesson 2, “Checking Materials and Settings, Scene Colours and Ribbon Tabs” (12 min). Later in Skill-Lync's Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course (paid): lesson 4, Planning structural layout and introduction to TSD Week 1 Session 4; lesson 5, Planning structural layout and introduction to TSD Week 1 Session 5; lesson 6, Modeling of the industrial Steel Structure-Part 1 Week 2 Session 1. The full course has 54 lessons (18 h 48 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello everyone. Welcome to this course of Tekla Structural Designer for Steel and RCC Buildings. In this course, we will learn the application of Tekla Structural Designer in analysis and design of structures. Tekla Structural Designer is one of the building information modeling tools which are used to model, analyze, design, and extract reports and drawings. The software can be used to design RCC, steel, and composite structures. For this week, we will learn a bit more about Tekla Structural Designer as a software, the user interface, modeling of grids and construction levels in the software.

Then we will take an example of an industrial steel structure and model it in the software. But before we start modeling, we will have to develop an understanding of the input drawing and based on which, we will work out the structural framing to generate the general arrangement of the structure. So, what is Tekla Structural Designer? Tekla Structural Designer is a building information modeling or in short form we call beam tool which can be used to analyze and design RCC and steel structures. For the analysis part, apart from the gravity loads, we can also generate wind load and seismic loads under the loading category of the analysis.

For the design part, there are two ways we can design in Tekla Structural Designer. One where we select the members and other one where the software select the members for us. After we are done with the design part, we will generate our report. Then we will produce some drawings. The drawing will include the general arrangement of the structure. We will extract the beam detailing and column scheduled drawings. So, let's get started with the user interface. So, when we double click the software, you will see a window like this.

From here, next we will select the option New from the top corner to start a project. The first tools on the top of this software are here is known as Quick Access Toolbar. This toolbar has the most basic tools like Save, Open, Delay, Undo and all of the basic tools that we need to go through this software. So, this here, what we have is called the Ribbon tab. This is where we have our most useful tools or commands. Under the Model tab, there are options to create Beam, Column and Slab.

Similarly, the loadings to be applied from the Load tab. We will be more familiar with these over the time while we are practicing few models in the software. This window is known as Project Workspace. The Project Workspace provides the information related to the model, loading and validation. We can click here and see the levels that are inserted into this model. Here, we can see the design parameters and the modeling information for the design part. This is where we will see our loadings. Whatever we input loading, we can check from this window.

So, next is the Property Window. Here, this section is called the Properties Window. We will use this to view or edit the member properties. We can also check whether the number sizes we have inserted in the model are correct or not using this property window. This here in this plane space is known as Scene View. We will use this view to view our model in 2D, Frame and 3D views. Right here, if we go this side, you can see the Scene Content window. So, we will use this Scene Content to filter our members and loadings.

Here, you can see there are some tick options. If we expand these members, you can see all the members listed here. Say, we just want to see only Steel Beam. So, we will switch off the rest and then we will select the Steel Beam. So, this way, we can filter out whatever we want to see in this view of ours. Once the model is done, we will need to move to the loading. Then, we will need this loading list to view the loadings we have inserted.

The loading list is right here. Here is our loading list. The default are the self-weight excluding slabs. The slab self-weight, their load service in post. And anything we want to add will be shown here. So, next to this load case is the load combinations. So, load combinations we will generate during the modeling. And once those load combinations are generated, we can check the load combinations in under this loading tab as well when we are checking for the analysis and design results. Now, before we start the model, we need to check and modify the model settings.

The settings interface looks something like this where we have a lot of options on the general, the design codes, the design settings. All of these points we have to check before we start the modeling so that once we start our modeling, we don't face any issue in the input unit or the output units. Let's go to the software and let's see how to modify the settings in the software. So, to access the settings, we have to go under the home tab. Inside the home tab, you will see this option called settings.

We will select settings here. Under the settings, you can see there are options for general settings, result viewer setting, reports, unit, design code, design settings, and analysis settings, and so on. So, let's go to the general settings. Under the general settings, you will see there are some settings for language, appearance, autosave. This one, you can change whether you want your model to be saved in the interval of 5 minutes to 10 minutes like that. This is basically if some error happened in your modeling, you can always go back to your autosaved mode of the model.

So, just make sure that it is always enabled. Next is the confirmations. So, basically under confirmation, you will see a few options are there. The tick mark means you want to have these confirmations before any actions are taken. Suppose you want to delete a load case. If you tick mark here, it means before deleting, the software will give you a warning that the load case is about to be deleted. So, this is a good practice to select all these confirmations before we move on so that we don't make a mistake of deleting some loads that we really don't want to delete.

Similarly, this one is only for update of the softwares. Next is Resolve Viewer. So, Resolve Viewer is basically what is the result settings you want inside. What are the font style or sizes of the text you want under the Resolve Viewer. Next is Report Settings. So, once we have finished our more design of the structure, we will generate a report. So, under this option, we can select the report style like whether you want the calculation section, heading, subheading. Then, we will go to page option. Here, we can set up the margins of the page.

Then, we go to the table options. If we have a table, what are the width of the table? So, all of these we can use to modify the settings of the report. This one is as per the preference of your project you are working on. Let's go to the units here. Here, on the top of the unit, you can see there is an option to select a metric or US. For ours, we will select metric. Next is the Design Code. Under the Design Code, you have to select the Head Code.

So, under the Head Code, there are various countries for which one you can select. In our case, we will select Indian Standard Code. Then, here you can see the name of the codes are being displayed here. And then, the year of the code. Are also displayed here. If you want to change, maybe you want to change, you can change it from here. But we will, for hours, we will follow the latest code. Next, we will go to design settings. So under design settings, you have subheadings like analysis, concrete. Under the concrete, you will see there are settings for beam, column, wall, slab, foundations.

So under the design settings, let's go to the analysis. Here, there are a few options of analysis like first order, second order, P-delta analysis and all. For our case, for simple structures, we can always go for first order analysis. So here, we have already selected the first order analysis. After this, we will go to the concrete. So let's select the general. So let's select the general. In the general, you can see there is bond coefficients and modifier. If you want to change, we can change these values from here.

Now let's go to the beam settings. Under the beam settings, you can see there are a few options. In the country, we will select India. We can go for other country depending on your projects. In the minimum bar size. In the minimum bar size, we have to click the minimum bar dial like this here. And then there are a few type of bar mentioned here. So whether it's a plane, type one, type two, let's select type two. The grid of bar also, you have to change from here depending on your project requirement.

And then the minimum bar dial. We have 6, 8, 10, 12. Let's select 12 for our project. Then the maximum bar size. Similar like the minimum, you set for, you will select the rib type and grid first. Then you go and select the size of the dial bar. Let's select 25 for the maximum bar size. All right. Then for sidebars, same also, pretty much like this. But let's select a size of 12 dial for sidebars. Now this is the cover in your reinforcement. We can change this value from here.

We type whatever value we want. This is the tension steel spacing maximum and your compression steel spacing. So short span. Short span maximum length is, if we select this value, this one will give you the type of reinforcement. The bottom and top reinforcement will be determined based on the short span length. Any beam lesser than this span will be designed as short. And the support bars and span bars will be merged accordingly. So for our case, let us select 2 meter as a short span beam.

So we finished our beam settings. Now let's go to our column setting. Column setting also. We will select a minimum bar size for the vertical reinforcement. Let's select 16 mm dial. Also maximum, let's use until up to 25 mm dial. Here is the tie bar reinforcement. Let us, let us remain 8 mm. But maximum, let's go up to 12 mm. Also check the clear spacing. Here also check the clear spacing. So once we are done with the column settings, let's go to the wall reinforcement setting.

In case we have a sheer wall in our project. Also similar to column settings, we will have to select our bar size. Let's select around 12 mm. Maximum is 25. Minimum clear spacing between bars is 50 and maximum 200. We can remain like this. All these settings we have to do before we go on, before we move to our modeling. So let's go to slab now. Minimum, minimum loose bars, we will use loose bar. So if we want to, minimum is, let's consider around 10 mm.

Maximum 16, maximum let's go up to 12 mm. Okay. T1200 is the minimum reinforcement that we will allow. This is a minimum spacing that the slab will auto design. We, let's change this one to 100 as well. This is the maximum we will allow the spacing. Let's go for around 250 or the two times of the slab depth. So here we can modify the values as per our requirement and as per the quota provisions. So similar like slab, we have foundations as well. So you can just check the foundation reinforcement, minimum sizes, minimum spacing and modify from under the foundation tab.

So there are a few other options here like auto design. Let's go and check auto design. So reset auto design to off always. We don't want our members to be auto designed. We want to design our members as per our requirement, as per the size we prefer. Reset auto design to off always. We don't want auto design. Steel joist. Under the steel joist, you have tolerance, concentrated maximums, sum of concentrated loads. All these values we can modify under the steel joist. For sway and drift checks, if we enable sway check for wind load, it will give us a summary of the sway checks.

Whether our building satisfy the sway checks or not, we will get to know about this under the analysis tab. So this is how we do the concrete settings. So all this is very important to take care of before we go and run the model. Under the design settings, there's another option called design forces. So let's go and check this out. In the design forces, we have to input the values of the forces below which the members will not take the consideration of this force while designing.

So in our case, any tension force, say less than 0.05 kN, will not be considered for design of the member. So we can edit these values under the design force settings. Next, let's go to the loading setting. Under the loading setting, we can select if we want to apply for pattern load. In our case, we will not use the pattern loading. Hence, this option will not be selected. Next is structure defaults. Under the structural defaults, you will see three options here. TOS, SSL, and TOF. The TOS is called the top of steel.

The SSL is structural slab level. And TOF is the top of foundation. So we will select TOS for our construction level definition. These are the extension means when we model a grid. Whatever the length we model, we have an extension of about 500 mm in the modeling. So this is the nominal cover of the beam. We can define our cover here. We can always go and edit in the properties windows. For now, we have considered for beam 30, column 40, walls 25, slab 30, pad basis 50, and pile cap.

Let's change to 50 as well. Or let's change to 75 actually. Normally, these covers are generally specified in the project brief. And should also satisfy the codal provisions. Now let's go to the section defaults. Under the section defaults, some sizes are mentioned. You can see here. These sizes will be assigned to the members unless we specifically change the size while modeling. In case we have a predetermined size that we want to assign to the member, we can always use these settings. So this is the general settings that we need to ensure we have done before the analysis.

Another is here under the drawing setting. We will go into this once we finish our modal analysis and design part. Once we save OK, the settings are saved. Thank you.

Want the rest of Analysis and Design of RCC & Steel Structures using Tekla Structural Designer?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course

The remaining 51 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.