Lesson finished
Up next: Property Sets, Construction Levels, Grid Lines and Input Drawings
Unlock all 54 lessons of Analysis and Design of RCC & Steel Structures using Tekla Structural DesignerFull course ₹40,000 · paid
Checking Materials and Settings, Scene Colours and Ribbon Tabs
A free lesson from Skill-Lync's Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Planning structural layout and introduction to TSD Week 1 Session 2”
What will you learn in this free Analysis and Design of RCC & Steel Structures using Tekla Structural Designer lesson?
The instructor checks the material and reinforcement lists under the Indian code, including loose bars and a 12 m maximum bar length, then reviews model settings such as grid renumbering that skips I and O. The lesson changes member colours in scene settings and walks through the ribbon tabs for loading, analysis, design, foundation, reports and drawings.
- Reviewing material grades and reinforcement bar sizes
- Grid renumbering conventions in model settings
- Changing member colours and fonts in the scene
- Ribbon tabs and the solver, result and review views
What comes after lesson 2?
The next free lesson is lesson 3, “Property Sets, Construction Levels, Grid Lines and Input Drawings” (16 min). Later in Skill-Lync's Analysis and Design of RCC & Steel Structures using Tekla Structural Designer course (paid): lesson 4, Planning structural layout and introduction to TSD Week 1 Session 4; lesson 5, Planning structural layout and introduction to TSD Week 1 Session 5; lesson 6, Modeling of the industrial Steel Structure-Part 1 Week 2 Session 1. The full course has 54 lessons (18 h 48 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
So, after we have done the settings, let's check this material. This one will give us an idea of the listed materials here. The head code is India. If the material is steel, we have this grade of steel mentioned here. In case of concrete, we have the grade of concrete mentioned here. You can always go and check the properties here. Always check this one property whether as per the code will provisions or not. Then for reinforcement as well, we are going to use loose bars. You have mesh also. So, for our project, we are going to use loose bars. So, we will remain at loose bars. We will go for type 2. So, here is the grade. This is the available sizes. If you do not want to use size like 6, we can delete 8. We can delete 8. We don't want to use 6 and 8. Then we can remove as well. Okay. See the property for bar dia 12. Its area is correct. Maximum bar length 12 meter. So, before 12 meters, we have to provide the lapping in our beams.
So, similarly, we have shear connections here. We have side plate here and decking also in here. If we want to add the metal decking or precast. So, our example, we are not going to use this three. So, we will just go through the material reinforcement only. Let's check this one out. Let's check this one out. The model settings. Okay. This one, the unit and design code we have already done under the setting tab. So, let's just check this one out. This is the renumbering direction. The direction of the beam renumbering. It can be from the top left to bottom right or from bottom left to top right. This one, we can let it be in the as a default unless we for some reason we won't specifically want to change this naming.
So, here is the renaming. Sometimes, we actually ignore I and O because it causes some confusions. So, we will just do the same here. We can maintain 1 and A or if we want to change, we can always change it here 1A. So, we will rename this way. So, we will rename this way A to Z, A1 to Z1. Alright. So, this is no issue. Then, here is a format. Formats for the structures. This is just for us to just go through only. These are very basic default settings that this is not going to affect our modeling in any way.
So, let's go to the loading. We already have done this in our settings. Alright. It looks like most of this we have already covered in the settings. Except this one structural beam. So, structural beam is basically when we use Tecla Structural Designer as a beam tool as well. It means we will export our model to some other software like Revit or Tecla Structures or we want to import our models from Revit or Tecla Structure. If we are doing the beam modeling, then we can access from here.
Here, there is an option to export and import as well. Okay. We don't have anything to change here. We will just go and save this. Okay. So, we have gone through the model settings, the manage properties, manage view configurations. There is one more settings we can actually explore here inside the scene. Okay. So, this is the color of the member property that we do. Sometimes we can change the colors for our easy reference. Say, for under member, if it's a steel member, we can change the color.
We can change the opacity. This one is the opacity of the member. Okay. We will explore one more option here under the settings that is known as the scene settings. Under the scene settings, we can adjust the colors of the members. Sometimes we do this to differentiate the view of the members. Sometimes we do this to differentiate the view of the member in this software. This helps us to differentiate between the columns and the member and the steel members. In a very complex model, it is useful.
So, what we do is here, we go to same member. Then we can see it's steel. Expand this one. So, for beam, it's actually yellow color. So, we can change this color to maybe blue. And we go down. We have all beam here. Let's make all this beam as same color. Okay. Then similarly, we will change this one also. Let's go to column. Let's make a column a different color. So, we can always differentiate in the model when there are many elements. It's easier to identify actually.
So, let's make all these columns under one category. Okay. Similarly, for bracing as well, we can change the colors. All this is just to differentiate the elements in the structure when you say there are multiple bays and multiple elements. These are very useful. So, all right. So, we can change it from here. All other elements, you can also change from here. Another is the font option. So, under the fonts option, there we can increase or decrease the font sizes here. Okay. For dimension, we can always increase the size.
So, this one. So, this one we can see when we suppose model a grid and we want to measure the dimension. Then we can see it from here. Like for example, let's model some dimension here. Let's just model one grid here. Okay. And we want to indicate the dimension for this one. Okay. Let's just show some. So, we just point some dimension here. Let's make another grid here. Okay. So, we have a dimension here. So, this dimension one can be changed using the scene content settings.
See, if we increase the size of the scene content font, this dimension font will start increasing as well. Okay. So, let's go back to our settings. Okay. So, this is the font. So, we're pretty much done with the settings. Anything else we need during the modeling, we will come back and check out this one again. So, once all of the settings are done. So, once all of the settings are done, we can model from here. We will do our modeling using these tools from here. Anything we want to edit, we can always go into this toolbar under the edit option.
So, we have join, we have join, split, and reverse, beamline, all of the various kind of options are here. This tab is for loading. So, we have load cases, combination, load groups, everything under this tab. Then we have analyze tab. Under the analysis, we can see the first order analysis, non-linear. But generally, for simple structures, we do not need to go for second order analysis. We will see in the first order analysis, the simple analysis methods. Under here is, under the design tab, we have the option for a gravity design.
And the static design means gravity plus a lateral loading for steel, then for concrete. This one, if we have a building with both concrete and steel, we can choose this option. This is for foundation checks. Then, here is separately, we have foundation, model, Under this, we can model the pad, footing, we can model the piling as well. So, after the foundation, we have reports. This tab, we will use to generate our reports. And finally, this is for the drawing generation. This is the basic ribbon tabs.
Okay, if we see here, this one is the structural view, the view where we will do our modeling. Next is the solver mode. What solver mode means, once we do our modeling, and if we go into the solver mode, we can see the nodes of various nodes that are created during the modeling of the building. After the solver mode, we have another option called result view. Result view is basically, once we have done our modeling, we can go into the result view, and we can see the ribbon tab here changes.
Now, it will indicate the force, deflection, the strip result. All our results, we can check from the result tab. So, this one will open only when we select this result tab from the bottom. After the result tab, we have review tab. Under the review tab, we can review the status of the member sizes are enough or not. Whether it's over-designed, we can check from here. This is the review tab. So, we will go into detail into all of these, once we are finished with our modeling and analysis part.
So, after these basic guidelines on the tools and the settings, we will go and check the manage property sets. How do we manage the property sets of the column and pins? So, let's go and check that one out, how to do the property sets.