← Previous lessonFree lesson 3 of 3 · lesson 3 of 6

Unlock all 6 lessons of Advanced Sheet Metal Design using NXCADFull course ₹40,000 · paid

Price & syllabus
Free lesson · 46 min · no payment

Converting Solid Bodies to Sheet Metal Using the NX Wizard

A free lesson from Skill-Lync's Advanced Sheet Metal Design using NXCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “3.0 - Convert to SM wizard”

What will you learn in this free Advanced Sheet Metal Design using NXCAD lesson?

The instructor converts solid and imported bodies into sheet metal using the convert to sheet metal wizard, then unbends and rebends the result. The lesson covers edge rip, the cleanup utility, optimize face, and adding additional geometry for drawn shapes such as advanced flanges.

  • Convert to sheet metal wizard steps
  • Edge rip to prepare a body for bending
  • Cleanup utility for non-uniform thickness
  • Additional geometry for drawn bend areas

What comes after lesson 3?

Later in Skill-Lync's Advanced Sheet Metal Design using NXCAD course (paid): lesson 4, Stiffening the sheet metal; lesson 5, Resize Bend Radius and Bend Angle; lesson 6, Advanced Joggel. The full course has 6 lessons (6 h 55 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Part 1

Hello everyone. Hope you are doing good. So today we are going to see the lesson number 5 that is convert to sheet metal. So basically this topic is used to convert the solid bodies or some dumb bodies if we are getting how we can convert those non-sheet metal part into a sheet metal part. Basically the uniform thickness. We have covered in our previous lessons we have seen the basics. In lesson 1 we have seen about the basic shapes of the sheet metal. The first feature that is always the tab and also how to create flanges and how we can bend it and how to unbend, rebend, how to do the corner and various punch categories.

So these things we have seen in the previous lessons. So these things we have seen in the previous lessons. Basically from lesson number 1 to 4. And today we are going to see about lesson number 5 that is convert to sheet metal. So we have a wizard in NX to do all these steps. Basically to convert the non-sheet metal part into a sheet metal part we need to follow certain steps. Okay. So these steps are already available in a wizard format. So wizard format is nothing but whatever steps we need.

All the steps are already know. All the steps are captured in one single dialog box. So that step by step all these steps will be executed. And when you say finish in that particular dialog box you will get the final output. Okay. So that is called wizard basically. It's a set of sequence of commands available in one particular dialog box. Okay. So that is wizard. So we have a sheet metal wizard to do this step. So to convert all our non-sheet metal part. It can be a solid body or any dumb bodies, parametric, unparametric, doesn't matter.

So we will take those files as an input and we do certain steps. For example, rip wherever required, right, clean up the utility, optimize the phase. So these are some of the commands normally we use to convert the non-sheet metal part into sheet metal part. So as we have already told, these things are available in a wizard format. Okay. So we convert the non-sheet metal part into a sheet metal part and wherever we need, we do some ripping of edges. And as I already told, we can do some cleaning of geometries, right.

So it's basically the wizard contains all the steam line workflow, okay, right. So in this case, this is one simple example I have given here to say, you see here, this is the solid body. It doesn't have any sheet metal characters, it's just a solid body, but we want to convert this as a sheet metal so that we can able to bend or unbend it, right, like this to see the flat sheet like this. So for that, we execute certain commands like the ripping of edges, right, and we can tell the system what is the base and based on the base surface, the flatten will happen, okay.

So it will flatten like this, unbend. So these are the steps available in the wizard format. It's a streamlined workflow, right. And yeah, edge rip is one particular command. Normally, the wizard, in wizard, all these commands like edge rip, optimize phase, cleanup utility, all those things will be available in the same dialog box. Because even in a next sheet metal, we have individual commands also to do in certain areas, we just want to do only a drip, for example, or only the optimize phase I want to do separately as a separate command.

So separately also, these commands are available or in inside as a wizard inside one dialog box also, you can find all these commands, okay. So first we will see how the wizard works, and then we will see individually also how those commands are used individually. So let's see this in NX now. This is our first example that is convert to sheet metal. So you see here, I have already created some sketches and created some geometries. So let's see what we have done. So what we have done is, first we have created one simple sketch, and then we have created one solid body, like this.

And then we have created some uniform thickness here. I just made a shell, so that I get uniform thickness, okay. So the parameter, if you see, we have taken the value, let's say 3 mm thickness, this solid body contains. And I created another sketch, this is my requirement in the component. So this is another, let's say the flange, and one more flange on the other side, okay. But they are solid bodies, okay. If you see here, solid body has a filter, you can see it's a solid body.

So now the task is, how, if I have a solid body, something like this, so it can be parametric or non-parametric, and how we can convert this into sheet metal parts, so that I can able to unbend this or flatten this, okay. So we need to just go to the application sheet metal, and here you have the basic group itself, the first command you can see here, convert, okay. This is the wizard, and these are all those individual commands, okay. So let's take the wizard first, and you see one by one all these commands are coming now, right.

So what it is asking, it's asking, which edge you want to rip, okay. So wherever it is applicable, we can use it, or we can simply skip this step and directly go to next step, okay. So in this case, I need to rip this, then only I can able to flatten this and bend this. So the ripping edges are nothing but, this is my edge 1, and let's say the edge 2. Even you can select the inside edges like this, like this, and these are the places I am ripping it.

Ripping is nothing but a small cut, okay. So just select that, and say next. Now you see automatically, according to the sheet metal requirement, these places are getting ripped. So that these things can be flattened now automatically. So now the next thing is the cleanup utility come into the picture, and it is asking, which is your base face? Based on which face you want to select this. Just select here, and once you select the base face, now it is saying some non-associative cleanup body created here, okay.

So let's see that. Just say next to it, and thicknesses are automatically considered here. And once I say next, you see here, all the unnecessary or the portion, we can't able to convert it as a sheet metal in this step can be removed by this cleanup utility. See, it means whichever is not suitable for the sheet metal work, that can be removed by the utility based on your selections, right. So it's basically cleaning up all the unnecessary objects, and also not convertible as a sheet metal feature.

So those things also can be deleted or removed, right. So next, a this, finish this, and now you see, so a new geometry got created, and this can be now unbend, right. So say unbend, so act here, the base, and the bend faces, and now you can see, you can able to flatten this, right. So the input is, there's just a solid body, and the output is, it becomes a sheet metal part. So if someone gives you a dumb body, or just a solid body, and you can just create the flattened sheet out of it, by just creating all the rips wherever necessary.

And also, you can clean up the models, optimize the faces if required, so that a solid body can be converted as sheet body. So, the final output is, just a flattened solid, okay. So now, let's say the rebend of this, after unbending, I'm just doing the rebend, so again, I can re-bend it. So it acts totally like a sheet metal now. So that is the purpose of convert to sheet metal wizard. We have seen, if we have a solid body, and how to convert it into sheet metal part, right, by using a wizard.

And in the same wizard, we can even use the rip options, and also the, the cleanup utility, optimize phase, and all those things. So the cleanup utility is used to modify these areas. For example, in our next case, we will see, what will happen if I have a non-uniform thickness here. For example, say, the 3 mm thickness in all other places, and only here, I have, let's say, 2.8 or 2.7, something like that. So, it's a varying thickness. So, can the software consider all those things also? So, the answer is yes, right? So, if the deviations are within 10% of the thickness, the software will try to consider those things as like a uniform thickness, okay?

So, let's see in our example, next example, how it is converting these non-uniform areas into the uniform thickness level by adding the outer bend radius that is equal to the thickness of the geometry and also some 0,2 mm as a inner radius inside that, okay, in the bend. So, this is like a bending area of this flange. It's taking a bend from this edge. It takes a bend and the bend radius, the outer side is just the thickness of the part and the inner edge is 0,2 mm, okay, O2.

So, that one, we will just check it in our next example in the next, okay? I'm just going to my second example, say, this one, for example, here, you see the same case, but I have created some variation in this thickness. Say, for example, let's see from here to here. So, this is my second flange, this side and this side and I just offset this little bit, okay, this one and if you see the measurement, you can see here, I just gone a little higher here, 3.3, okay?

And on the other side, I just simply reduced it, all right? So, now here, I put 0.3 less here, so 2.3. So, basically, in all other places, it is uniform thickness, that means 3 mm and here I use the 10% deviation here. So, now let's see how this convert to sheet metal wizard works here. So, convert to sheet metal wizard, we will take and then the ripping is required, yes, I will select the edges. These are the edges, I am going to rip it to make this unbent. And we have seen in the previous example also. Then what is the next step? So, we go to the next step and then see it is asking the cleanup utility, the base phase.

So, based on the selection, so, this modifications will happen. So, let me see what will happen if I keep my selection somewhere here. So, it says one non-associative cleaned up geometry created and now you see and this area, it is totally removing it and the other area, you can see the bend radius is added here. You can see it is added. And as we have already discussed, inside also, there is a small radius added by the system. So, it can be unbent now. So, it will act like a sheet metal part, right?

So, I just say finish here and let's check what is the radius available here now. So, it's available from analysis, local radius. Let me go here and then see how much here, right? So, how much it is saying? 3.02, see? It's added and inside you can see the same 0.2 is added here, 0.2. So, the outer radius is 3.02, the inner radius is 0.2, right? So, this outer radius and the inner radius for the bend is automatically calculated by the software and it is added there, right?

So, these are all the analysis results. Normally, you will see it here. If you don't want to see them in the display, maybe you can hide it here, right? In the group analysis, remove this. Okay. So, basically, it is cleaning up and some unwanted area and adding the required bends and converting this solid body as a sheet metal body. So, in the same example, let's try instead of keeping the base here, I will keep the base somewhere else and then see what happens to this. I just do undo this. I just delete up to here and this is our original input and yes.

So, we will just repeat the command again. Same command, I use the ripping edges, yes, this, this, this and this and now instead of selecting here, let me say base face here and how it is calculating. Let's see. Next. Okay. So, in this case, if you see, it considers these both the flanges also available. So, based on the selection, base selection, the cursor selections, the calculations are different way it is happening. You see, now in the both the sizes, I can able to get the flanges with the same outer and inner radius calculations.

And now, let's see how I can able to unbend this. So, yes, it's already converted as sheet metal. So, you can always unbend this. Unbend. And the bend faces. Just drag a window, cover it. You see, it's unbend. So, this is our flattened sheet or it is called the blank. Okay. And the industry term. So, rewend it. Just same way, just drag a window and then it revends back to its original form. So, this is how we can able to convert and also we will do some cleanups if the sizes are varied, if they are non-uniform thickness.

So, we can just convert them as a uniform thickness so that it will just consider as a sheet metal part. So, you see here the 0, 2 is nothing but our working tolerance basically. That's why the 3 mm instead of 3 mm here it is taking with the tolerance 0, 2. Because inside it has to give the tolerance value 0, 2 as a inner radius. That's why it is adding 3 mm thickness here. So, 3, 0, 2 here, 3.02. Okay. That's how it is calculating. It's based on our working tolerances set to whatever we have given there.

Based on that value, it is adding it here. Right. So, very interesting and a cool feature to convert the non-sheet metal parts into sheet metal parts. So, it can be just directly created in the modeling in NX with all the history or it can be just imported model. Let's say the parasolid step kind of thing. So, it will consider all those dumb bodies or it will convert those bodies into sheet metal part so that we can directly give the blank size to the as per the requirement.

Okay. Right. So, very interesting. The next topic is the edge rip. Okay. So, in the wizard also we have seen the edge rip things. And as an individual command also this edge rip is available. Okay. So, in the edge rip normally we have a sheet metal part and the rip is nothing but just to make one small cut in the sheet metal area so that after cutting it can be ready for the bending something like this. Okay. So, that is called the edge rip. Okay. So, let's see this in NX how we can cut it like this and how we can make a bend something like this.

Right. It's an edge rip. So, this is already available in the wizard also. Okay. So, in the same dialog box but it can be available as an individual command separately also. Okay. This is my final shape. You can see and we have made some rip and then we have made some bend here. Right. The ripping and then bending. So, let's see how we have done this. So, the first thing is we need to create a tab and then I will just created the flange. So, we learned this already how to create the tabs and the flanges and so we can make a rip something like this.

So, that you can see one additional edge got formed here. So, this is before the ripping. So, after the rip. And then we are just using this rip line we make a bend here. Okay. Bend it. There is another rib and then there is a bend line for me. I just bend it. I just bend it. Clear. So, something like this. Right. So, let's see how we can able to do this. I am just repeating everything from the tab and flanges. Okay. So, the tab is there, flange is there.

So, now we need to know how to do a rip here. Right. So, under the same group convert, you can see edge rip. Okay. If the lines or the curves are already there, you can directly select it, or you can select the existing edges to rip it, or you can create a section also, right? And then say this is my ripping line. Say, for example, I am creating a section here. For example, in our previous case, same way, I just draw a line, something like this, and the rip is formed.

You see, now the edge got created. So now, once this is ripped, and then only this portion can be bended now. So, that is nothing but our bend option, the bend, command, bend, bend line. Again, I am creating it. Yes. So, on this phase, I am creating it, and where you want to keep the bend line. Just keep the bend line, and then finish this, right? Now, you can see, right? So, it gets bended. This angle can be flipped, which way you want it, right? So, same way, if I create a rip on this side, then accordingly, I can be able to bend it, right? So, I will just do one more.

I am just repeating the step, same steps, and edge rip. This time, I will go here, select the section, create it, create the rip line, create the rip, okay? Just cut it here, like this. Now, you see, this portion is available now. Then, you can go for bend. Bend, bend, just do the bend line, the bend line, okay? So, you can flip it, whatever way you want it. Like this, like this. Yeah, this is what I need. So, we can just play with the arrows, which one fix, which one, which side I want to bend, and all those things, right? So, that we will create the bends as per our requirement.

So, in this case, if you have noticed, we have a tab, and we have a flange, and in that flange, we simply rip the portions, and then we just make a necessary bends, right? So, that is the advantage of edge ripped, okay? And mainly used as we have seen if there are dumb bodies, and we need to tell the system based on which edge it has to bend, and all those things, the rip command is used, right? So, let me check this using unbend command. Based on this face, you unbend everything, and give me the flatten area. So, this is my blank area. So, re-bend, bend it back, right?

So, this is how we can work on the edge rip, right? So, basically, just to cut the flanges or the web, and then using that information, we can able to make additional bends, right? That is how it works. Good. So, it is a nice feature. Okay. So, we have seen the edge rip, right? So, we can see if we have edges in the solid body, we can able to rip it like this, and then it is ready for unbend, right? So, we can take any edges like a corner edges or any sketch lines also, we can take it for the rip.

And we have seen the example also. Thank you very much, and we will see in the next lesson, we will discuss some more points in the sheet metal and axe sheet metal, okay? Good. Have a nice day. Thank you.

Part 2

Hello everyone. Hope you are doing good. The next one is cleanup utility. So the cleanup utility also we have seen in the examples. So basically it will correct all the existing problems so that it can able to create or it can able to form the sheet metal part. It can be basically used to clean up all the imported parts. So if you have asked, we have already discussed about the step parasolid and the imported datas and where there are a lot of geometrical issues and we want to just reduce those things or remove all those errors then we can use this cleanup utility option.

This is basically there are non-uniform thickness available and then we can able to correct them because for the thickness, the thickness is a very important factor for the sheet metal. So sheet metal is always it is a uniform thickness, right? So if there are some non-uniform thicknesses available in the existing geometry and we just convert all those things as a uniform thickness then we can use this cleanup utility. So cleanup utility will take care of those things. And then it will take care of the silver faces. So the silver faces are nothing but very large or very high length width aspect ratio faces, okay?

And maybe in the next slide I can just show you this is called the silver surfaces, okay? Or the edges. You see it's very lengthy edge, okay? The length is more but the width is very less. And this type of small faces are called silver faces, okay? And sometimes if they are there are some edges and they are called as spike edges or spike faces also, right? Very small in width but the length is too much, okay? And these type of problematic areas will be addressed using this cleanup utility.

And also if they are not having any continuity, if they are discontinuous and we just want to convert those phases as a continuous phase and that time also the cleanup utility will help us to convert those problematic areas into nice geometrical areas, okay? And if there are some B surfaces are available in the geometry and those surfaces will be converted as some analytic surfaces here, the regular surfaces, okay? So they are very easy for the calculations and very easy to form, right? So that's why this utility will help. The problematic model will be converted into a very perfect model, right?

So cleanup utility will help for that. We have seen this if there is a bend, if the bend radius is 0 in the available part and we just want to convert that, then the outer radius will be considered as equal to the thickness of the part and the inner radius goes to 0. So instead of 0, it is taking the working tolerance. So in our previous example, we have seen that, right? So that is the working tolerance value here, in this case, 0, 2, right? Wherever the sharp edges or the non-uniform areas and all those areas will be considered or cleared using this cleanup utility, okay?

So in this case, if you see, I have given some example, you can see here the thickness is not uniform in this case. And once I run the cleanup utility, you see here it comes correct, okay? So like that, if there are very small edges or discontinuous phases and all those things will be corrected using this cleanup utility. So very important tool too means whenever we work on particularly the imported parts, right? So if the parts are created directly in NX, these problems will be very, very minimum.

But if the parts come from outside, like an imported part, then normally we see all those issues like the non-uniform thickness, right? The discontinuous and the silver phases, spike edges, right? All these things will be considered and will be cleaned up when we use this cleanup utility tool, okay? And as we have seen, if there are B surfaces come into picture, say, for example, in the cylindrical area, if it comes as a B surface and once we run this utility, that area will be converted as cylindrical area, cylindrical phase.

That is the advantage of using this cleanup utility, okay? So this cleanup utility will be used when the convert to sheet metal command is not producing the result correctly. That time only we will go and check this cleanup utilities and correct all the problematic areas and then the input model will be converted into sheet metal without any issues using resort or by the software, okay? And in addition to the cleanup utility, we have another command called optimize phase also. And this optimize phase normally used even in modeling areas, modeling applications to correct all this kind of problems, okay?

The spikes and silver phases, you see, something like this. So when we examine the geometry and it will highlight these are all the problematic areas and these things will be corrected once we use the command optimize phase, okay? So they will merge if there are discontinuous phases, those phases will be merged and if they are discontinuous, they're not maintaining any continuity and we want to maintain, let's say, everywhere the tangent continuity and once we run the optimize phase command and it will convert all the available disjoint phases into single phase.

So basically, the optimize phase also will help us to improve the quality of the model, okay? So you can see here, this is the initial conditions. Once we run the optimize tool, optimize phase command and you will get the result something like so. This is a better one. So in this case, maybe the inner surface may be considered as a B surface and these B surface will be converted as a cylindrical surface, right? So the B surface will be converted as a planar surface. So like that, analytic phases will be formed once you use this command optimize phase, okay?

Convert to sheet metal is the command basically used to convert the non-parametric model, solid or solid bodies, parametric solid bodies, non-parametric solid bodies into the sheet metal part. So that is a command used like convert to sheet metal. So once that is done, we can able to do all the sheet metal operations like bending, flattening, un-bend, rebend, all those things, okay? So basically, the cleanup utility and optimize phase and all those things will be used mostly on top of the imported geometries because only the imported geometries like parasolid step will have the problematic geometrical datas, okay?

So this is the step normally we follow. So we have seen already. So this is a solid body and we just do the ripping and cleanability, optimize phase and all those things. Then we do the convert to sheet metal wizard or a individual command so that the solid body will be converted as a sheet body. This is our next topic that is if we have some advanced features and how we can use this command. So let's see this in NX and before going to this, we will just discuss whatever the points we have seen in the existing example.

I just opened this cleanup utility command and we have seen just now in one of the examples, we have seen it. And you can see it has been converted. The solid body has been converted here and the rip has been made here, right? So this is our original body. I can just show you the original body. We know how to create this. And you can see here there is a distance command. I have put a measurement here. You can see this is having a non-uniform thickness here.

The web thickness is non-uniform. You see 3.3. On the other side, maybe I just put a little less value. You see, this is 2.7. But the original thickness is 3. So like this, in this case, it is having some non-uniform thickness. So these kind of issues or the problems also can be solved using the convert to sheet metal wizard, right? So in this example, if you noticed, and let me hide this original body and keep this, the converted one, as a sheet metal body. And now let's measure this and then see what is the thickness of this part now, okay?

So when I go to the machine. And analysis, measure distance or maybe measure length and it can tell, it can tell what is the length here, the edge length. You see 3 mm. Yes. Perfect. So it is just adjusted those deviations and make everywhere the uniform thickness. You see here 3 mm. Right. So this is the advantage of using that convert to sheet metal wizard or the cleanup utilities or the optimize phase and all these commands you can find it here. Right. Optimize phase, cleanup utility, ripping the edge. And basically you need to use all these commands either individually or all are inside one wizard dialog box just to convert your imported model or a non-parametric solid body.

into a valid sheet metal part. Right. That's the aim of this command called convert. Okay. Good. A lot of information we have seen in this command and let's see the next topic now. Okay. So now we will see how we can convert the sheet metal parts from the draw type of inputs. Say for example, I have a solid body and maybe a dumb body, but it's not a straight break sheet metal. So it's not having any planar kind of like tabbed and flanges, bands like that. So it's having some draw type of profiles. Okay.

It's not a straight break sheet metal. Right. In those scenarios, we can just convert them as a sheet metal part by giving some additional inputs like additional geometrical inputs inside our wizard so that those things also will be considered as a sheet metal inputs. Okay. So in this case, if you see and there are some advanced flanges are used here and some jocks are even if there's some jocks are available and in those scenarios, we can always use the additional geometrical inputs so that these areas also will be considered as the input so that you can able to flatten it. Right. Flatten it or unbend it. Okay.

Let's see this in a next example in NX. Let me just go to the NX. Yeah. So if you see here, this is just a, I have one advanced flange here and another advanced flange here, but it's a dumb body. And it's created in some other software or I have just imported it as a null feature here. Right. So now I want to unbend this and I just want to give the blank area or the, the flatten shape here. So how to do that? So first let us see the, our normal method, the convert to sheet metal wizard we will use and as usual it is asking any edges you want to rip it. I say no in this case it is not needed or not required.

So I just go to the next step and then whether you want to use this cleanup utility here. So I said, uh, no, everything everywhere. It is uniform thickness only. So maybe I can skip this step also. And then I will go to the next one. And then here it is saying convert to sheet metal, whether based on which face you want to select it. So I just like based on this face, I just want to select without giving any additional geometrical input. So that is the important here step and then see what happens.

So if we don't give this additional geometrical information, then what's happening? Let's see that I just finished this and now it is giving me one message saying the body converted successfully. But these highlighted areas are not part of the state break kind of work. They are the considered as a deformed faces. So they cannot be unbend or re-bend. Okay. Bend, unbend, re-bend, all those things are not possible. That's what it's saying here. Okay. I just said that and let me check the unbend option here. Now go here and then say bend now, select here.

Now see only this face is considered as a bend face. The remaining faces are not at all considered because of this draw type of nature. So they are created with advanced flanges or sometimes the jog kind of features. Okay. So, so what I do now is I just cancel this. And instead of doing this way, I just use the additional geometry information also in this. Okay. So go to the converter sheet metal and the same procedure I'm following and base phase for cleanup. No. And I say convert this as a based on this face and the additional geometry.

So two inputs I am giving extra here and just say finish this. And now after this, when I say unbend this based on this, now you unbend it. Now you see all the bends are considered now and we can able to get the flat solid of it. Okay. So that is the advantage of using additional geometry. So the point is whenever you have a draw type of nature and when you use the convert to sheet metal wizard says there is some draw nature here, can't able to bend and unbend.

And then you can use that additional geometry. So just select all the bend area wherever you see. And so that the software will consider those things from the draw feature as a bend area so that you can able to bend it and then unbend, rebend, all those things are possible. So you can get the flat solid here. All right. So now I can just say rebend this considering it back. You see the form is done. So from this dumb body, you can convert that as a sheet metal part. So you can able to give flat solid or unbend and then see the flattened shape.

So that is the main advantage of using the convert to sheet metal wizard using various options. Okay. So very powerful feature and very very useful whenever we handle different data from different software tools. Okay. So we have seen whenever there is some draw type of deform kind of feature available and sometimes these bends won't be considered by default in our convert to sheet metal command. So what we have to do is we have to in the same sheet metal convert to sheet metal wizard, we have an option to add additional geometries for the conversion.

So we have to select these bends and say these are also should be considered as a bend, bends, right? So that the software will, during the conversion, it will convert all the solid inputs using these additional information also and then you can able to form it. Okay. So you can able to unbend this areas also, right? Like this. So that is the convert to sheet metal, right? Command. Okay. So we are in the end of lesson number five. That is, we have seen in this, these five topics, mainly we spoke about it. That is convert to sheet metal wizard.

So wizard. So wizard is nothing but all these commands, the set of commands are available in only one dialog box so that in the same place you can execute multiple operations and you can able to complete the task. You can basically convert the non-sheet metal part to a sheet metal part. So the input can be a parametric part or a non-parametric part, step or parasolid. So any solid bodies you can take as an input and then you can convert that solid body as a sheet metal body by just giving some additional inputs to it. So, so the edge rip command will help us to this process to convert from solid body to sheet metal parts.

And the edge rip is nothing but it will just make one small cut out. And so that we using, so that the edge will be formed and using that edge, we can able to bend it. Okay. That is the main purpose. And even for during the unbend also, based on the rip information, the software will calculate, okay, these are all the places I can able to unbend it from the formed state to unformed state. Okay. The third one is the cleanup utility. Again, we discuss about in the cleanup utility, we can able to just convert all the problematic geometrical areas into a perfect areas.

So, for example, if the input geometry is having some non-uniform thicknesses, okay, having some small variations, normally the 10 percentage of the thickness and those cases can be handled it using the cleanup utility and the B surfaces. If the B surfaces, if the B surfaces are available in your imported data, those B surfaces will be converted into a... Analytic phases like planar or some cylindrical phases, regular phases, and the continuity can be maintained if you have some discontinuity in these surfaces, and it will give the smooth transition surfaces, okay, and that is the cleanup utility, and then we spoke about in the cleanup utility, we spoke about the silver phases, that is very high length, more length to the width, okay, the length is more and width is less, so length to width aspect ratio is very high, and all those scenarios also, we can use cleanup utility, right, and then the optimized phase, the optimized phase also is a similar command, just to convert these problematic phases into a regular or perfect phases, okay, that is optimized phase, basically, basically, the same kind of work, whatever we see in the cleanup utility, that is nothing but the optimized phase also can able to do it, for example, in the B surfaces, and I am not getting any cylindrical edges or the cylindrical phases, then when I use the optimized phase, those B surfaces will be converted as the regular analytic phases, so that is optimized phase, okay, so there are multiple phases disjoint, and we want to convert them into a single phases, then optimized phase can help us, okay, so the converted sheet metal again is an individual command, all these commands will be part of this wizard, okay, so converted sheet metal is again the same topic, it just used to convert the non-sheet metal part into a sheet metal part, okay, so that is the end of lesson number five, right, thank you very much, and we will see in the next lesson, we will discuss some more points in the sheet metal and a sheet metal, okay, good, have a nice day, thank you.

Want the rest of Advanced Sheet Metal Design using NXCAD?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Advanced Sheet Metal Design using NXCAD course

The remaining 3 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Advanced Sheet Metal Design using NXCAD course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.