← Previous lessonFree lesson 2 of 3 · lesson 2 of 6Next lesson →

Unlock all 6 lessons of Advanced Sheet Metal Design using NXCADFull course ₹40,000 · paid

Price & syllabus
Free lesson · 61 min · no payment

Sheet Metal Corners and Punch Features in NX

A free lesson from Skill-Lync's Advanced Sheet Metal Design using NXCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “2.0 - Corners”

What will you learn in this free Advanced Sheet Metal Design using NXCAD lesson?

The instructor treats corners where flanges meet, using closed corner, three bend corner and break corner, and shows how relief and mitered transitions change the unbent blank. The same lesson also covers dimples, louvres, solid punch and die, drawn cutouts and normal cutouts.

  • Closed corner with circular relief and mitre
  • Three bend corner and clearance value
  • Dimples, louvres and solid punch or die
  • Normal cutout instead of extrude cut

What comes after lesson 2?

The next free lesson is lesson 3, “Converting Solid Bodies to Sheet Metal Using the NX Wizard” (46 min). Later in Skill-Lync's Advanced Sheet Metal Design using NXCAD course (paid): lesson 4, Stiffening the sheet metal; lesson 5, Resize Bend Radius and Bend Angle; lesson 6, Advanced Joggel. The full course has 6 lessons (6 h 55 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Part 1

Hello everyone. Welcome to our second sheet metal training, NX sheet metal training second lesson. In our first lesson, we have discussed about tab and flanges. Also, we have seen what is the workflow we have to follow whenever we need to design a sheet metal component. For example, from the scratch, how we have to start directly from the NX sheet metal or if any dumb body is given, how to convert them as a sheet metal part. If there is any null part given, basically a dumb body, it can be a STL, IGS, TEP, these kind of files.

Then how to convert those dumb solid into a sheet metal part. The workflow, basically, we discussed. If it's a single part, normally we start with a tab and then we add some flanges, add some other sheet metal features. Then we do unbend. Then we can make some cutouts and then we can rebend it again. And then we can go for the flat solid or flat pattern. So, flat pattern is our final output. So, that is the workflow. And similarly, for the dumb body also, we can create the sheet metal features on top of the dumb solid.

And then we can go for the unbend, then rebend, then flat solid or flat pattern. So, that is the workflow we discussed in our first lesson. And also, we have seen ways of creating the flanges, tabs also. So, today we are going to see about the corners. So, how to create corners in sheet metal. So, that is our second lesson. The corners are basically used to treat the flanges where the two flanges are meeting, right? So, here you can see one flange is coming this side and another flange is coming this side.

How I can close this? So, that is, you can see that we give some relief here for the manufacturing purpose or for some cutting purpose practically. So, how to treat them basically? That is called corners. Normally, wherever the two flanges are meeting, so that time we will give the corner. So, in the corner, the first topic is closed corner. We need to just select the flanges or the bends and then it will be treated like this. Okay. So, some of the examples I have given. So, there are various types available.

You can see here two flanges are coming and this can be closed in the corner. So, that is why it is called closed corner, right? So, the flanges can be on the other sides also. So, one flange can be on the side, on the reverse side, right, to the one plus side, one minus side. So, even if the flanges are created in different directions, still we can create the relief for the corner, closed corner. So, you can see here the closed corner and normally we will just give a smooth transition here just to avoid the jerk.

Whenever the tool is passing, when the tool is used to cut the blank, the blank is nothing but the sheet metal, the input sheet cut to the exact shape, we need some program. See, if it is cut in the CNC machine, we need a program for this particular part so that the tool will come and cut the blank. Then, once that is done, then simply this blank will go and bend into particular shape. So, the corners are used basically to give the relief and also to just for the tool movement, the smooth transition of the tool movement, we use this closed corner.

And there are various types of relief we can give like circular, U-type, V-type like that so that the profile can be here, it can be changed. Okay, so that is closed corner and now let's see this in our tool, how to do this. So, we will see how to create a closed corner. So, the command is available here. First feature is, as we know, so we need to just create a tab here. Create the tab is the first feature. We have already learned this from the lesson one.

So, this button is reset button. As I already told, it brings the default values. Taking those default values, I am creating a... Now, I am creating a flanges. This side and also one more flange on this side. So, now two flanges are there. Now, at this corner, I just want to give some closed corner or corner tree closed. Corner is here and so it's asking select the adjacent bins. I am selecting and now you see it gets treated. There are various types. Open, closed, getting closed.

Open type, closed type. Even in this, we have overlapping. You see it gets overlap is closed. So, circular cutout. If I take circular cutout, for example, then if you see here, there is a circular shape gets formed. You can just give the diameter whatever value you want to use and you can enable this type meter corner so that you will get a blend meter. You see now, there is a blend happening here. So, this will ensure that the tool is moving without any jerk whenever there is blank available for this.

So, for example, now let's unbend this and then see how our blank looks. You see here, there is a command here called unbend this. Anyway, we are going to see this in a new lesson. So, now I just want to show you how this transition happens. So, I have to select the stationary face and then the bend face is right like this. You see it is unbend. So, this is nothing but my sheet metal blank or the sheet. Now, you see the transition. So, the smooth here, the fillet, it comes here and then it's going out like this.

So, whenever the any sheet is taken or the blank is taken and if you want to cut to this exact shape, so we need a smooth transition of the tool. If there is no smooth transition, sometimes even tool may break. So, that's why the relief and the transitions are more important. So, good. So, this is our closed corner. One simple example I have shown how we can just move our cutting tool in a smooth way and how we can treat our corner. So, how to go back to our original shape here.

So, that command is called rebend. Okay. Rebend. Just to rebend, you need to just select the bend faces or you simply drag it. Software will understand and it will form the shape. Right. So, this is our closed corner example one. Okay. So, now let us see how we can give the corner if the flanges are going in a opposite direction. Also, we have seen it. Let me delete one flange is on this side and another flange. I am creating in a reverse side. So, for creating the flange in the reverse side, you have to take the top edge in this case.

If you select the bottom edge, the flange will go down and if you take the top edge, the flange will go up. Now, I am just selecting this. Just extending it. You can simply drag the handles. So, now you see one flange is on the downwards and the other flange is on the upward. So, how we can treat this using the corner command. So, the command is closed corner. You need to just select the bends. The adjacent bends like this. Now, you see it gets conceded and collected and now you can give the various options as we have seen closed or circular type cutout and how much radius you want to use.

Now, you see when I use this bend center, this one you can see the cutout or the relief is append here. And there is option here to offset this center, center of the circle. I just want to offset this with certain value. See, now the circle is getting offsetted. So, like that you can control the relief wherever you want. So, I just want to put some smooth transition here because it looks like sharp here. So, I will just go and say meter this. So, now you see the smooth transition happens here.

Not only in the downside, you can see in the upper side also. So, this is the advantage of closed corner. So, basically used to give the relief or the flat pattern requirements. Okay. Okay. So, next we will discuss about another corner treatment type that is called three bend corner. So, basically if you see three flanges or the bends are coming here and how to treat this corner. So, these bends can be with the same radius or it can be a different radius, different bend angles or the same bend angle.

And this is the input case and how we can treat the corners, something like this. Even see here the smooth transition. So, whenever there are three bends come into picture, then we can think about three bend corner. So, you can see here you can simply give the smooth transition fillet so that the smooth transition will happen just to avoid the jerk of the tool. And this we have seen in our example earlier. Even you can offset the center, the relief cut. I don't want this center exactly in this bend area.

I just want to offset this little bit. Then I can use the offset value and then I can create a circular cutout. If some flanges are intersecting like this, even you can give the clearance value so that sufficient relief is provided in our blank. So, that is also possible using the three bend corner. Okay. So, now let us see this in the tool. Okay. So, let us see in NX how to create the three bend corner. So, I have already created one tab and now let's create a flange.

Create one flange here. So, with some default values like this and I will create another flange. I can change the angle like this and I will go to the other side. You see now it is getting intersected. Right. So, you can adjust this bend angles. Now, so I cannot take this way. Right. This is not a logical way. So, how I can treat these corners in this case. So, since there are three bends here, I can go and select the three bend corner option. So, it is as...

Okay, give me the adjacent bends. Just select the adjacent bends like this. Now you see the software automatically trims the unnecessary unwanted thing because these things are not needed and you can see in the corner it puts some treatment. So if I want some specific type of corner treatment here, I can just use these options here for example and now I take circular cutout. I just give the radius and still I find there is a smooth sharp area here but we need a smooth transition. I use the blend meter option. So that comes here and we can control the radius of this meter also possible and the diameter we can change. You can see the cutout and this offset. I don't want the circle center exactly in this bend areas and I can even offset this. Okay, so it goes down. So this is what we have seen in our presentation also like this and now you see the shape. It's meaningful, right? Good.

So now let us see how we can unbend or how to see this flat solid. So first let's say unbend this and it's asking what is the base. The base surface then the blend surfaces and now you see how it looks. This is called the blank, right? Blank. You see the smooth transitions. Now if I want to go back and see my original shapes then I can go to re-bend this again. This time you don't need to select any base faces. Just select drag a window and then select the faces then you will see. Right, so this is our three bend corner option.

So the bend radius can be same or unequal. The bend angles can be same or unequal and all the scenarios you can treat the corners according to the... Okay, so now in three bend corner how we can check this flange clearance. Okay, how this clearance is happening like this that we will check in our NX model. Yes, we have a tab. We know how to create this and we will create a flange. Okay, I'm creating one first flange. So that is my first flange. And now I will create the second flange. Okay, I'm changing the bend angle a little bit. Now I will create one more this side. So basically these two flanges are having some intersection.

So I am just giving the corner treatment here. So three bend corner. Just take this blend and this bend and this bend and now you see corners are treated. And now I just want to check the clearance option. So what is the importance of this? How this is changing in my blank size? Okay, so let's see that. So for that let's unbend our model. I'm just unbending. So now let's see how it looks. So it looks some sharp way here. So now I just want to change this area. Just improve my design, blank design. Then what I do is I just go and change this by giving the clearance. Okay, clearance.

All right, let's say 2.5. I just give this to 5, let's say. And now let's see what happens to this design. You see now it gets improved, right? Earlier it was so sharp here, both the flanges. And now let's see that I'm just putting the previous value. And now let's see. You see it's very sharp on this bend area. So now I am just increasing this clearance value. And now it gets improved. Okay, this is the more recommended practice. That is the advantage of giving clearance here. We will see the next corner treatment now. Okay, so the last option in our corner is break corner.

So normally this command is used to give some smooth transition or just to use to remove the sharp edges actually. You see here everywhere it gets removed. So the fillet is happening here. So in place of sharp edges, we are giving the fillets. So let's see this in NX. Yes. So we have a tab and let's add some flanges. Okay, let's add some flanges. So I have added one flange. I add another flange, for example, this side. And then I just add one more on this side.

So like this, I just added some flanges with the 90 degree bends. And now I just want to give the break corner, corner break. What it will do, it will just rounds off or give some chamfer on the sharp edges. Okay, let's take this. And it's a blend option. There's a chamfer option available. Let's take the blend option. And we will just select the faces here. Now you notice here, so you see the radius applied on all the sharp areas and it gets removed. All the sharp edges are removed in a single go now.

That's the advantage of giving break corner. Because whenever there is any sharp edges available, normally that area we will find more stress. Okay, so we just to avoid that stress areas, we can smoothen, right? We will give some smooth transition or that is the purpose of using break corner, right? So let's see how to use this chamfer also here. Select the face or an edge. And if I say chamfer and if I select the edge here, now you see an individual edge for the blend. You can just select this blend. So here it is. The blend is given. So one end we have given the chamfer, another end we have given the blend.

And like that we can control individually. We can take the inputs, the entire inputs for our blend and the chamfer. So that is the purpose of break corner. Basically to remove sharp edges. Okay, so we have seen the break corner. So we used to remove all the sharp edges. And that is the end of our lesson number two. So in this lesson, we have seen closed corner, three bend corners and the break corner. So closed corner is as we discussed. Whenever there is flanges, multiple flanges are available and we just want to treat that particular corner by giving specific relief and considering all the tool travel whenever I use the cutting tool to cut the blank sheet.

I just want to travel the tool in a smooth manner. So all those factors are considered. There is a closed corner, two flanges we are considering and the three bend corner. Here we are considering three bends and basically the bend angle can be different and the bend radius can be different till you can use the corner, three bend corner. So the last option is break corner. The simple option just to break the corners by giving pillars. That is the end of lesson two. Good. So we will meet in the next lesson and with a more new option.

Thanks.

Part 2

Hello everyone, welcome to our sheet metal training. Now we are in lesson number 4. So in this lesson we are going to speak about the punch functionality. Okay, so what are the various operations we can do in sheet metal using the punch command. Okay, but in our previous lessons we have seen about the tab flanges, how to create bends, how to treat the corners, and how to do unbend, rebend. All those things. And the next is our lesson number 4, that is punch. So in that punch category we have the first command dimple actually. So the dimple is used normally to lift the material to certain height. Okay, you see here after creating some bends or the flanges, multiple flanges, and only some area of this sheet metal has to be lifted off. Okay, some area of the sheet metal has to be moved up. So in this case you see the boundary has come little outside, maybe the boundary normally used as a closed boundary, and it can cross the sheet metal boundary, or it may be within the sheet metal.

So whatever dimple boundary you are creating, that can be within the boundary or it may come outside also. But basically it is just to lift off the material, maybe on the plus side or in the minus side. Okay, so basically the procedure is once you create all the bends, and normally you have to unbend this. After unbending, you have to just draw the area to lift off. So how much area you want to move up. Say for example, I want to move up like this, and then I have to create a boundary, closed boundary here like this as a dimple boundary.

And once that is done, and once that is done, and you can again bend it back, you can re-bend it, bend it or the multiple flanges, and then you have to say, and then after the unbend, just draw the profile, and use the dimple command, and then re-bend back. So bend it back. So that is how the workflow comes when we work on dimple. Right, so now let us see these cases in NX. We are here. I have already created some feature for you. For example, I have created a tab, I have created a flanges, some multiple flanges, and if you notice the radius is here, the bend radius is 3 mm.

So now, whatever the dimple depth, whatever we are giving, that should be less than that bend radius. So that we have to check it out. Now see, after creating flanges, and I am just doing the unbend option, so we have learned how to do the unbend. It is nothing but just we have to select the base face and then the bend areas. Right, so once you double click, normally you can change or see the parameters, what we have defined. And then, after this, then I have to create a dimple on this.

You see now, the profile is, this is the dimple area. I just want to lift off this sheet metal, and then again, I can re-bend it. Right, so unbend, and then create the dimple cross section, and then re-bend it, so that you will see the final shape. Okay, so let me repeat this. The last three steps, I am deleting it. Okay, so now I am here. So let's say make current feature. It means I am working on this level now. So now what is the first step? We have to unbend this. Okay, let's say unbend, and which one you want to keep it as a stationary face?

You can select the stationary faces, and then the bending area, or the unbend. So once this is done, and now I have to go for the cross section, the cross section, the dimple, and then you have option sketch the section where you want to sketch it. And normally, the cross section should be created on top of the surface, right, the base surface. And here, I can create the cross sections like this. Let's come out of this, or you can just give the dimensions, whatever you want to do this. Okay, so we will just repeat this.

So the first option is take the unbend stationary faces, then we have to go for the radius, and then the cross section for the lift off, right? See, now it is formed. It's created. And now, once that is done, you can again bend it back. So what is the command we have to use for that? We have to go for the rebend option, rebend, and simply select the areas. Now you can see, again, it is formed here. Now, if I want to move this cross section a little away, yes, what I have to do, I have to go here, modify this, double click, and then select the button.

This cross section, I can, let's say, like this. Now you see, it has come out, and the final output will be like this. So the boundary can be within this metal, or it can, the closed boundary can come a little outside. But what is important is, where you are selecting that base face, suppose this is the base face, and then you will get the result exactly, right? So the procedure is, we have to first unbend, and then we have to draw the cross section for the dimple, for the material lift off, and then we have to rebend it to get the shape.

So whenever the values are not correct, maybe you will get an alert, so that you have to play with these values, just to see, to get the successful preview, okay? Right, so I have another example also here. So let me take that. In this example, what I have created is, it is just inside this. Let me deactivate some of the commands, and now you see, there is a tab I have created, and then the flange relief. You see here, flange with certain relief from our center option I have taken, and the width I have taken, and how much length that is taken.

Similarly, I have taken one more on the other side, right? So we learned this already. Now the procedure is, we have to unbend this. Yes, we have unbend. And then we have to create the cross section, the dimple. See, now here, so it is an inside one. I have just created this, just give the direct, and it will form it, and then you can re-bend it. Alright, so this is how we can work on the dimple. Let us see some more examples also here. Yes, so we can play with these values. So now you see, it is removing the material here.

Suppose I want the plus side of this. I can simply double-click this dimple. I can just flip these arrows, which side is the kept area. So now you see now, it is the plus side of the material. The material is added. So by simply flipping the arrows, we can able to get the shapes as we need. So similarly, here also, we can, by double-clicking and changing the arrows, we can able to change the shape. Alright, so now this is like. So whenever the arrows are available, we can always flip it and then see the various results.

Let us see some more options. Okay, so let us see the dimple example, some more dimple examples like this, how to create, like this, how to create. So in this case, if you see, we have some normal cutout. This is called a drawn cutout or normal cutout. And then this is the dimple feature. So let us see how to create these. So the third one, I have just created some feature groups. So to create this feature group, you can simply select the features and right click.

And you have an option, feature group. And you need to just give the name here so that the feature group is getting created. So I have created a tab here. This is my tab. And then I have created a flange, this side. And then another flange, this side. And now I need a shape, something like this is the dimple. So what I do is I just delete this and I will show you how to create this. Okay, so now here, I just say make current feature.

And then now I have to create the dimple. Dimple and section plane, this one. Okay, this is the cross section for my dimple. So now you see you are getting some alert here. It says deeper than the bend radius. It cannot be unbend. And still if I say okay, maybe you will see one alert symbol here. You see something here, the yellow mark triangular. You see here in the navigator tree, you will get a column. Whenever there is any alert, it says alert. And then the same message, you will get it here.

Normally, you see the dimple is deeper than the bend radius. This cannot be unbend. So what to do now? So I have to change the radius. So let me change this. Just double click. And let me put, I think the bend radius is 3. It will go less than 3. Now the alert symbol gone. And here also no alert symbol. And we can able to get the result like this. So this is a dimple feature. So directly you can create it on top of the formed shape.

Okay. So you no need to unbend here and then create the shape again, bend it back. So that is also possible. And even you can create it directly on the formed shape. That is also possible. So now let's go for the fourth one. There is a output of this. Let me bring back everything update to end. Disable this and enable this. Now in this case, we have some drawn cutout and also the dimple feature. So for that, here I have made the unbend. You see, now I am just deleting this and this.

So in this case, we have to unbend and then the dimple and then the drawn cutout. Okay. And then re-bend it back. Let me delete these things from here to here. I am deleting it. Okay. So now we have a tab here and then one flange this side and another flange this side. Inside with some corner relief. We know about that. And now I have to unbend this. So unbend it, keeping this as a stationary and the remaining bend areas. Okay, bend areas. Now you see this is going outside because we have not given the make current here. That's why. So let me just drag and drop this level so that it is part of now the feature group 4. Otherwise, it's just coming outside.

So the locations are very important. Say make current. Now, once I say make current, whatever I add now will be inside this group only. Otherwise, it will go outside. Even if it goes outside, you can just bring it back and then make the necessary steps. Okay, the correct group active. Whatever feature you will create, that will go as a part of this particular. Okay, so now we have unbend it. Now we have to create the cross section for the dimple. So first we have to create the dimple and then we have to go for the this one, the cutout.

Let's say dimple gives my placement area. I just create a dimple. Got it? So this way or this way, how much deep you want to go. So you can give all those things you can control here. So now the dimple is done. And now we have to go for the cutout. So same command, same way. The difference between this dimple and the cutout is in cutout normally, you will have some opening area, open area, cross section plane, sketch plane. And then I just want to make a cutout. The drawn cutout, trying to drag this little bit. So you can adjust the dimensions. You can give the exact values. So what it's saying is failed here. The directions may be wrong.

Say for example, if this is like this, you will get the same. So this is the depth direction. So just flip it. So you will get the, this is how we can create the cutout and the dimple features. And you can adjust the values if you want. So that the sufficient flange, the deep you can give here. So now, so this is in the flattened state or in the unbend state. You can re-bend it back. Just re-bend it. Simply select the faces. Right? So we have re-bend it. So these are the various cases for the punch.

So we have seen different cases. That is our first one. First example, you can see here the various bends and then the dimple feature here. So just to lift off the material. So then in our second example, we have seen again the, this case and it means the boundary can be inside or it can be out. So the boundary can come out also. But the only thing is we, we need a closed cross section here. Right? So in the third example, we have seen this one. So we have not here. We have not set the unbend before creating this dimple.

We directly create the dimple on top of the formed state like this. That is also. And then in our last case, we have seen the cutouts. Okay? See, see sometimes when in NX, when you go outside some working level, some areas may be, you may not see them. So you see the display. Sometimes it will cut off certain areas. To avoid this, just say fit control F so that everything will be in your working area. So you no need to go and adjust some working limit. So whenever some areas are cutting off, you can always say control F or the fit it so that everything comes under our working area.

So in this case, you see, we have created a dimple and then we have created one cutouts. Right? So that is the normal workflow. Always first create the dimple. Right? So this is our punch related operations in the sheet metal in our presentation. Right? So these are the examples we have seen. We have seen this example. We have seen this and the lift off conditions. Right? Plus side, minus side. And this is a normal workflow we need to generally follow. So if there is any formed shape, first we have to unbend it, create the dimple cross section and then form it back.

And this case is also we have seen directly we have created and we got the shape here. And if there is a cutout, we have to first create the dimple and then make the cutout. Okay? So same thing we have explained here. It's related to the depth, how much depth I have to use related to the bend radius. It should be smaller. And then the directions are important. We are controlling this using the directions just by flipping the arrows. So the dimples we are creating first before we are creating any, any cutouts. Okay? Right? So that is a dimple example. And then now we are moving to the Louvre. Okay? Louvre normally used to give some wind.

Actually, there's some circulations to avoid or to remove if any temperature generated here the heat just to give some proper ventilation. We use this Louvre. Normally you have seen this in various sheet metal component which are used in let's say the computers etc. Right? Louvre. Let's see how to do this in NX. Okay? So the next topic is Louvre. So normally we use this command just to ventilate. Okay? So you can see here there is a small gap and through this gap the outside air will come or the inside hot air may come out.

So we need the provision here in the geometry of the component for the better air flow. Let's see this in NX. Right? So I have created one tab here. Now we have a command here. Louvre. So this button is normally used for reset. Reset my dialog box or get the default values here or the recommended values for this command. And it's asking select the section or create it. Okay? I will take create option. Now I have to create the cross section. So normally this is the open cross section. Just draw a line for it. So once you draw a line then you will have the options here.

This is the first one kind of lands kind of thing. You can see the gap here. So you can see here it's a gap. Now you can flip these arrows just to see different shape whether you want like this or like this. And you have an options here. And rounding for example I would just want to round it. You can see here. Instead of sharp edge here you will get a round shape here. So basically this will be formed from the die side. So normally we use the tool know the punch and the die to form the shapes. And this profile or this shape will come from the die definitions. Okay? This is a lancing type. So we can adjust this according to our requirement whatever way we need. So we will get it. We will put the radius if we want. Right?

So the next option is instead of lancing I will go for formed shape. Formed. Once I change this to formed then you will get a shape like this. Even we can round it if we need. And we can flip it. So from which side you want it. So from which side you want it. This way or this way. Right? This way. So according to our requirement we can always flip this just to form the shapes. That is the lure creation in a next sheet metal. Okay? It's very easy. Easy to control the shapes by simply flipping the arrows and just needs one open cross sections on the sheet metal geometry.

Right? Right? So now we go to the... Okay. Our next topic is in the punch category. We are going to see the command solid punch. So normally to get this type of shape we can use the solid body. Say for example this is my sheet metal tab and I have one solid body. And I want to consider this body as a tool body or a punch. So the shape whatever I have here that will be incorporated here in my sheet metal part. Say for example I have a sheet body. I have a solid body here and using solid modeling workbench I am creating this and I just say this is my punch.

Once I say the punch. Once I say the punch the shape will be applied here or incorporated here. So there is a punch category and we will see this how to do this in NX. And if the same thing if I say this as a die for example it's a die category. The same sheet metal and I just say instead of punch this act like a die. And then the shape you see it just goes based on the die definitions take the shape from here. Whatever negative area you are seeing here in your die you will get a positive area of the same in your output.

That is the die concept. That is the die concept. Whatever negative area here it will produce the positive area in your component. So this is the tool and this is my component and we have option to define whether to consider it as directly as a punch and here you see this is the plus area and this plus area will make a minus area negative area here. You see the removal material here. And there is a punch category and in the die category here it is a negative and this negative things will produce the positive things here.

So we have both options to say whether it's a punch or a die and the very important thing is we create these geometries in the solid modeling workbench and then bring it into sheet metal and then just say they are die or they are punches. And once the shape is formed here and then the parallel faces using these parallel faces we can add any dimple flanges okay the additional features on top of the punch command okay right so we See this in NX, how to do these things, right? We need to discuss about the punch and die command. And I have already created one tab here using the sheet metal command, the tab. And then I created one extrude, just the extrude command. We no need to go to the modeling applications. These kind of modeling commands are available directly inside here, okay?

So directly the extrude options like hole. These are all normally the modeling related workbench commands. But still we can use these commands inside the sheet metal workbench, okay? So using extrude command, I have just created one extrude. So basically if you see the sketch of this, I just created the profile like this and simply extruded it. And similarly, you can see the next one, another sketch for this. You can see, let's say show this and you can just see the sketch of this, right? So in this case I have made one, I just want to consider this as my punch and then I just want to consider this as my, this is my die and this is my punch.

So that is the definition I just want to give. Let's first start with the punch one. Yeah. So the command is available here, solid punch. So that is the command we are going to. And basically it just gets the shape from the solid modeling or solid geometry. Okay. So I just go to the punch option, punch, and it's asking the target face and then the tool face. So I'm getting the okay option. Just say okay to this. And now you see whatever you're given from the solid model, it takes the shape here.

So this is the punch, the advantage of a punch actually. So if you don't want these blends and just remove this, how much die radius we want to apply, we can control it. So now you see there is no blend given here. Only in the outside you are seeing this, right? So these shapes are the, how much depth it has to go down. All those things we can control directly in the, in our solid geometry here. So whatever change you are doing here, that will be in the, that will be affected in the final shape.

So I am just going back to the blend edges option so that you can see the some blends are. So similarly, now we need to go for the die category. This is the punch, the positive area of the punch, you know. So it makes this negative portion and the remaining area is just formed from the sheet metal. And now we just see how the same thing happen when I go for the die category. So let me hide this tab and just show you how exactly my die looks.

So this is my die looks. And if I press it, I just keep the sheet here on top of it and bring the punch on this. And then when you press it, how the shape will be formed. So that's what we need to understand and we need to see. So this is the shape. Basically, I just want to give to my sheet metal. So let's see the tab where it is. So it's exactly here. So that much of deep it is going, you can see here the line, whatever you are seeing, that is the top.

And this much of depth it is going down. So that's what I want to convey here. This is my top surface of my blank or the sheet metal. This much of depth or the cutout is there in my from here to here. There is this much of deep my die is having. Same kind of positive material will be formed in the original blank. Okay. So let's bring this. Now we have to tell that consider this as a die and then form the shape. Okay. So same command we have to use solid punch.

And the only thing is we have to change here as and same target phase is this and the tool body is this. And then they say, okay. And now you see the shape has been formed here. You can see the other side. Yes. You see. So creating directly these kind of shapes sometimes very difficult in the sheet metal part. So what we do is we just do the actual scenario that practically how it is formed. So we have a punch. We have a die. And then whatever shape we are applying on those punch and die can be incorporated in our sheet metal design directly.

So that is the advantage of using the punch and die. So let me increase this depth a little bit and then see what happens. It is minus 10 now. Let me go minus 5, for example. And then see what happens. So this is minus 5 level. Okay. So just change this. Let's say minus 15 and then see what happens. So whatever deep you are going, that much of drawn shape you will get here. So that's how you can totally control the shape using the punch and the die material.

So that is the die geometry. So that is the importance of using the punch and die concept in an sheet metal. Okay. So we need to select the target face and then we need to select the geometries and then just say whether it is a punch or a die. Accordingly, the shape will be activated or created in the sheet metal. Yes. So we have seen how to create the punch and the die features in the sheet metal. And once this is formed, the shape is created using the punch or the die.

And now by just considering these parallel faces, we can create the bead or a dimple, right, on top of this sheet metal output. Okay. Let's see how to create this in our example in NX. So this is my output by creating the shapes using the punch and the die. We have seen this, how to create it. And now let us see how to create a dimple or a bead on top of it. So I just go and take the bead option, for example, bead. So I just create this here on top of this.

And yes. And let me create a path for it, for the bead. And then yes. So it creates the bead shape here. And similarly, I just go for one dimple feature here on top of this. And today we have seen how to create this dimple. And I just go here and just create the dimple. So I just give the section, adjust this a little bit smaller. Yeah. So how much deep you need it and which way you want it. This way, this way. Got it. So you can simply play with the values, right?

See, it creates some additional shapes on top of the punch or the die features. Okay. We can create it. So it allows us, right? So we can create the other features on top of the punch or the die output. Okay. So that is our punch, solid punch command in NX sheet metal.

Part 3

So, the next command in our punch is drawn cutout. So, normally this command is used just to make a cutout, right, in our sheet metal part. So, we need to just create the boundary, the section, and then based on this section, it will just cut out the material. So, something like this. So, this is called the drawn cutout. So, we have a tab and we have a profile for our cutout. So, once you say drawn cutout, it just has how much depth it has to. So, if you have a cylindrical bends like this, and you can just flatten it and bend it, and then just draw the profile, and then again re-bend it, okay, and bend and then re-bend it.

So, you can see the normal or the drawn cutout here like this in this cylindrical area, right. So, that is called the drawn cutout. And the next command is our normal cutout, okay. So, before going to normal cutout, let's complete drawn cutout things here, okay. Just, let's see this in an X now. Okay. So, this is my drawn cutout example. So, let's expand this. And I just created these two. Now, you have one tab and some flanges we have created. And now, we need to create a drawn cutout here. Say, make current feature, drawn cutout. So, command is available here. Just cuts the area, whatever or wherever the sketch is available or the boundary is available.

And there, it just cut it, okay. What it needs? It needs just the cross-section, the cut cross-section, okay. Take the plane. So, I'm going to create it here. And then, now, we have to create the boundary for our normal cutout, for our drawn cutout, okay. So, normal cutout is different. This is called drawn cutout. So, this is a drawn cutout. And you can see the depth here and which side the material is getting removed, okay. So, drawn cutout. So, I can even create a circular sections also here. So, I go again, select the base surface and then the. So, now, I just want to make a cut in a circular form.

So, now, so, this is drawn cutout. So, now, the next thing is, in a cylindrical bend area, if I want to make a drawn cutout, what will happen, okay. That is our next case. Let's see that the next one to end. And I just deactivate this. Go back to this. And this is my next case. That is, if the drawn cutout is available on the bend areas and how we can create these type of shapes in the sheet metal. So, to do that, so, what we need to do is, we need to first unbend this. So, after creating it, okay. So, let me delete it, create it for you.

And what I have done is, I just created a sketch here with some line and then a line. And then I have taken a command, contour flange. You can find here contour flange. And here you will have option of base. So, once you select the base, it just asks to select the curve. You need to just select this curve so that the geometry will be created. So, this is my sheet metal geometry. And now we can unbend this. Just say unbend. It's asking stationary. Which one you want to keep stationary? And what are the bends you want to consider? Unbend now.

So, after unbending, you have to just create the profile for the drawn cutout. So, take the drawn cutout command and then select the planar face here after the unbend. And then just draw the shape how you want to create it. Okay. The shape you have to create it. Now you just see the profile got created. And now you have to bend it back. So, that is called rebend. So, just say rebend. And just select the bend area. Got the shape. Got the shape. And in the doing the rebend. And you can see this is the result.

So, the workflow is first we need to create the contour flange. Right? Contour flange. And then we have to unbend it. And then we have to make a cutout. The drawn cutout. Again, you can rebend it. So, that is how we have to work when we want to create a drawn cutout exactly on the bend areas. Okay. So, the next topic in our punch is normal cutout. So, basically we will do the cut normal to these flanges. Okay. If you do only extrude cut, for example, what will happen? Whatever sketch profile is available, the sketch plane, no?

Normal to that sketch plane only your extrude will go. But in this case, if you see if it is a normal cutout in sheet metal, what will happen is it will go along the flanges and it will make the cut. Let's see how it is applied in sheet metal. So, then you will get a clear understanding the difference between the extrude cut and the normal cutouts. Or simply remembering, whenever we do cutout in the sheet metal, always you have to go with normal cutout. That is the best recommended one. Not the extrude cut.

Because extrude cut won't follow the sheet metal characteristics like bending, k-factor and all those things. Okay. Right. So, in this case, if you see, we have a component like this, intersecting parts. This is one holder and there is a tube going there, a pipe going there. So, here you see there is a, I need a cutout here at this, exactly at this intersection area. So, in this case, what we will do is we will get an intersection curve here and use those intersection curve to make the cutout on this sheet metal part.

Okay. So, what we can do is we can create a contour flange here with this type of profile and then we will create a tube and then we will make an intersection curve. Using that intersection curve, we will make a cutout in this particular part. So, that's also we are going to see. And if you have a flange, something like this, and even you can make a cutout on those flanges like this using the normal cutout examples. Okay. Yes. So, in the normal cutout, what we can do is we can just create the sections, the normal cutout profile, and then we can simply make a cutout on these flanges. Right.

Let's see all this, the normal cutout, and if there are intersecting component, how we can use the intersection curve to make the cutout, and if there are multiple flanges, how the normal cut behaves, and these informations we will see now in the enactment. So, the first one, in this case, I have multiple flanges, something like this. I just want to make a cutout exactly passing through all these flanges. So, for that, what I have done is, first, I have created one flange, a contour flange, and just a profile we need to create, and just draw the profile, something like this, similar to it.

And then, once that profile is made, you can simply go to the normal cutout command, and the command is available here. Okay. Normal cutout here, this one. The only thing is, it will just ask, okay, give me the sketch curve. That's all. So, right. So, once you take the sketch curve, so in this case, you see, just I have drawn one line like this, and then, if it is in the extrude cut, if you see, it will go up to this level only, directly. Right. But you see here, in the flange, it's going a little up also. Right.

So, in the, if you make an extrude cut, always that directions are same. Okay. So, let's see it in the wireframe. You see now, you see, this, this direction is different. Right. So, it is always normal to the web or the flange here. You see, it's a normal always. So, whatever cut you are seeing, that is always normal. But if you make an extrude, then it will go in the same direction like this, and it will make a cut like this in the same direction. It may not be normal to this, but in sheet metal, always we need a normal cutout, so that, if you see in a unbend state, for example, I just want to unbend this, and in the unbend state, it is always, the cutouts are normal.

You see, now, it's just always a state. So, that's why it's very important in sheet metal. We need to always make a cut normal to this web. Right. So, if you make an extrude cut, normally you will see one, the angle, whatever extruded direction you are following, the same angle, you will see in this flange also. But that's not the correct way of working in the sheet metal cut. Okay. So, let's see how to create this normal cutout. I just make, delete this. Let's create one new cutout.

So, what it's asking, it's just asking, give me the sketch. Okay. This is my plane, and I need to cut it. So, in which area you want to cut, and how much distance you want to cut, you can control it. You see now. Now, this is going normal to this face, and now, let's see what happens when it touches here. You see, now, this gets changed, and now, this angle is normal to this face. Okay. This line, you see, normal. So, like that, if you make a cut, according to the flanges and the angle, the cut will happen exactly normal.

So, that's why this is called normal cutout. So, let's see if there are multiple components intersecting, and then, how we can achieve the cutout. So, let's see. I have just created one example, and you can see here, I have two parts. This one part, this is another part, I just want to make a cutout of. So, what I have done. I created one contour flange. I created one tube here. And then I have made an intersection curve in the modeling application. So how to reach this modeling application here from the sheet metal? You need to just go to the application and then go to the modeling. And here you can give the curves, right? So intersection curves. So curve, derived curve, intersection curve.

Then it will ask, give me the phase geometry and then another phase geometry. So once you give these two and then you will get an intersection curve. It's a 3D curve here. So if you want to see only that, let's see, let's hide the remaining things. Hide it. So you see it's a three-dimensional curve, 3D curve. And basically it's an intersection between this part. So once you have two components and this assembly or in a product and you need some cutout based on some information because till now there is no cut available here in this part.

So the best approach is just create intersection curve and then go for the normal cutout. So once you do the normal cutout, you see, it creates a cut on this side. Let me hide this. Okay. You see this? It creates a cut on the other side. And one more normal cutout based on this side. Okay. Then you can unbend it and then see how exactly they are available in the blank. And then if you want, you can re-bend it back. So let's repeat these comments now. And okay. So we created the intersection curve through in the modeling applications. So maybe I can repeat this for this also for you.

So I have two parts now. One is the holder and the other one is this, the tube. And now I need the intersection curve. So select the intersection and then phase one. So I'll take tangent phase filter. This is very important. Otherwise, on both the sides, it will create the curves if you take body phases, for example. So this option is tangent phase. So that I need the curve in this inner area. Or you can take outer curve. It doesn't matter. So then the next thing is select another geometry and just see the result. Okay.

So I got the curve here. So that is my intersection curve. And now I just want to take this curve inside the sheet metal. So just change the application to sheet metal. And now we have to use the command normal cutout. So I don't want the tube now. So I don't want the tube now. So I hide it. So always hide the unwanted one and keep only the required so that you will get the exact information. So the errors can be minimized. So keep what you need in the display. So that is a more important point.

Okay. Now let's go to the normal cutout. Yes. And here I have an option to select the 3D curve if it is available. One option is sketcher. Other one is select the 3D curve. So I will take this 3D curve option. And then the curve I need to select it. You see immediately it makes a cut. Normal cut. So similarly here. Good. So it has done this side also perfectly. So I am happy with the results. And let me check whether this sheet metal can be unbend.

And then it's always a good practice. Always you need to check whether they are unbend and rebend because sheet metal parts should do the unbend and rebend character. Then only I can say they are sheet metal. Right. So the unbend characteristics and the rebend characteristics are very important in the sheet metal. So always it's important to check at least temporarily when you do some task after completing certain steps. You can always check whether they are unbending and then whether rebending is happening without any. So that at the end the final requirement is normally is our flat pattern or flat solid.

So if this unbend rebend works successfully you will get a nice output in the flat solid or flat. Right. So unbend happened. So now let me form it back. Rebend. So now we got the cutout from the intersection curve so that it can hold this tube. Right. So without any issues. So this is how if any existing components are available you can always make the get the input from those available component and make use of those inputs to form the shapes in the sheet metal workbench.

So basically it is you can work on both the workbench simultaneously you for example like punch and die also we have created the shape in the solid modeling workbench only and then we bring it into sheet metal workbench and then we make use of it. So it's very easy to enhance it supports both the workbenches for the perfect flow. So we no need to worry about it. So they are very easy to work on both the things. But what is important is we need always ensure that the sheet metal whatever we are creating is getting unbended and also rebended without any issues.

OK. So that is the important point and we are in the end of the lesson number four. Yes. You can see the normal cutout. This is what we have completed just now. And yeah. If there is a flange one more we will see it before we conclude. If there is a flange available then we can make a cutout even on top of these multiple flanges also. So let's see this how this is happening in NX. OK. So I just go back NX workbench and the sheet metal.

I just bring my flange related operation group. So this one. So this you can see there is a flange available and here I just want to make a cutout here. It means I can just go to normal cutout and this time I have to choose sketch. Yes. And this face. And just draw the profile first and just make a cutout. So that's how you can work on the cutouts. Right. So normal cutout. So very easily you can just make it out. And we need to avoid that extrude cut because in extrude cut always that particular direction is maintained in the extrude.

OK. So that is a point. And let's summarize our work whatever we have seen today. In our lesson number four we have seen how to create a dimple. How to create a lube. So then the solid punch creation here you can take the type punch or a die and then we have created some cutouts drawn cutout normal cutout. OK. So that is the end of lesson number four. Right. Thank you.

Want the rest of Advanced Sheet Metal Design using NXCAD?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Advanced Sheet Metal Design using NXCAD course

The remaining 3 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Advanced Sheet Metal Design using NXCAD course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.