Lesson finished
Lesson finished
Lesson finished
Lesson finished
Lesson finished
Unlock all 6 lessons of Advanced Sheet Metal Design using NXCADFull course ₹40,000 · paid
NX Sheet Metal Workflow, Tabs, Flanges and the NX Interface
A free lesson from Skill-Lync's Advanced Sheet Metal Design using NXCAD course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “1.0 - Introduction”
What will you learn in this free Advanced Sheet Metal Design using NXCAD lesson?
The instructor sets out the NX sheet metal workflow from sketch and tab to flat pattern, then builds tabs, flanges, contour flanges, lofted flanges, hem flanges and jogs in NX. The recording also covers the NX interface, file handling, mouse functions, the part navigator and selection filters.
- Sheet metal workflow from sketch to flat pattern
- Setting default thickness and bend radius in preferences
- Creating tabs, flanges, contour, lofted and hem flanges
- Using part navigator, selection filters and mouse buttons
What comes after lesson 1?
The next free lesson is lesson 2, “Sheet Metal Corners and Punch Features in NX” (61 min). Later in Skill-Lync's Advanced Sheet Metal Design using NXCAD course (paid): lesson 4, Stiffening the sheet metal; lesson 5, Resize Bend Radius and Bend Angle; lesson 6, Advanced Joggel. The full course has 6 lessons (6 h 55 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Part 1
Let's start with the introduction. NX sheet metal application is nothing but it's an environment for the design of sheet metal parts normally used in various applications like machinery, automotive, aerospace, medical industries. This application helps us to design the sheet metal parts in a digital environment and considering all the design for manufacturing DFM related ideas or the concepts so that we can able to produce the sheet metal design in an accurate manner. Basically, it's enclosures or brackets and normally manufactured with a brick press. It can be a drawer type of components also. After this course, you can able to design any of the sheet metal design parts using any design, the digital CAD tools in a very easy way.
Okay. And we are going to use the application NX 11 for designing this sheet metal parts. And during this course, we will consider all the engineering functionality or the requirements needed to design the sheet metal parts. The different applications where the sheet metal components are used. It may be in aerospace industry, automobile industries, and some domestic purpose, and missionaries, right? So, almost most of the day-to-day life, we use sheet metal parts. Okay. So, what I can do using the NX sheet metal applications. So, using NX, you can create uniform thickness.
So, normally sheet metal design means it normally have the uniform thickness. And in NX, we use some basic features to create this uniform thickness like tabs, flanges, jogs, right, etc. And also, if any cutouts are required and any corners needs to be closed. And those things also, we can do using sheet metal, NX sheet metal. Even we can create some complex sheet metal parts by considering the solid model. It means we will create the solid model. And then, using that solid model, we will create the sheet metal encloses. And we can convert if you have a solid model. And we can convert into sheet metal also directly. That is also possible in NX.
So, directly you can use some of the modeling commands. If you already know some modeling commands, those commands also you can use it like the whole slots and also like copy pattern. Some of the modeling features also can be used inside the sheet metal workbench. Another point is you can import. Another point is you can import some of the dumb data. It is not necessarily to be inside the parametric NX native data. You can import it as a step file, parasolid from any other software by using import command, import geometries.
And then you can convert it as a sheet metal part, those things. So, you no need to build everything in the native NX sheet metal workbench. Then you can export. You can flatten it after importing your dumb data. You can simply convert them as a sheet metal part. And then you can export it as a pattern, export pattern for the drawing inputs. So, you can set all the standard parameters like bin radios, how much thickness you want to use, how much relief you want to give and all those things in the application in the area customer defaults.
So, once you set the customer default values and those values will be registered so that those things can be used automatically in all your exercises. You no need to every time give the same standard bin radios, relief and all. Right. So, next we will see the recommended workflow to create some simple part. If I want to create a simple design part, what are the procedures I need to follow? So, normally the first step is you have to sketch the shape and then you have to build the base feature. Normally it is called tab.
And then add the additional features like flanges, jogs, bends, okay. So, like this step by step, the sheet metal part will be produced. So, as I already told, all the DFM related, the design for manufacturing related ideas and concepts or the engineering requirements should be met so that our design will pass through. So, right, without any problems, right, without any problems. So, that it can be manufactured. So, after adding all the standard features, you can unbend. Again, if you want to re-bend and add some of the additional commands if you want to add.
So, some of the commands we need to add it in the unbend situations, like in the flatten situations. So, after adding those commands, and then we have to bend it back. So, we can re-bend it. And then finally, the last step is flat pattern. It is basically a 2D drawing, like 2D layout consisting all the manufacturing relevant informations. That is a flat pattern. So, the first step is just sketch the profile and then create the tab or a base feature. And then add the additional flanges, jog, bend, everything. So, then unbend it, add some more options like cutout, holes and everything.
And then again, bend it back, re-bend. And the last step is just make a flat pattern, flat pattern for the drawing output or a 2D. So, this is additional one. As we have already discussed, even the solid bodies can be used to build the sheet metal parts. For very complex things, you don't need to start directly from the sheet metal. If you have a solid body, so for example, if you see here, on top of this solid body, we are wrapping the sheet metal part. And then add some additional features like flanges, jog, bends and everything.
And unbend them, re-bend them. After unbending, add some of the beads, cutouts, as we have seen in the previous slide. And then re-bend them. And then, this is the final output, flat pattern for our 2D. Right. So, before we start designing, so we need to think about the ideal and the real world of sheet metal design. So, just to get some idea, so why the DFM is very important to understand the importance of designing the sheet metal parts. So, let's see the gap between the ideal and real world.
So, normally, the many engineers are developing the 3D model. Unfortunately, they don't know the manufacturing related. So, because of that, whatever they design is not going to be manufactured in a proper way. So, rework, lot of rework. While designing itself, it's very important to know or to remember all those manufacturing related concepts. We will discuss all those things in our training sessions. When we design a sheet metal part, what factors we need to, what are the engineering requirements we need to consider, so that we can design the error-free design, we can produce or release.
So, for example, in the real world, everything is perfect. Tolerance, allowances are not required. Just they consider that everything is possible, everything is perfect. Design as they like. But the truth is, there are various factors. For example, the chamfers at the edges, the collars near the hole, or the spaces between the holes. All these things are matters, or we need to consider what should be the minimum gap between the holes. So, what should be the minimum gap needed between the edge and the, for example, a hole.
So, these things are very important in the real-time design, real world of sheet metal design. So, in this slide, we can just have a look. So, what the ideal world thinks and what's happening in the real world in the sheet metal design environment. See, for the ideal world, we can just specify the exact hole diameters, the gap between. The holes you can just like that give and forget about all the tolerances and all those things. But in the real world, if you see, the holes expand in high temperature.
So because of this expansion, the holes may not align properly when they are going to be assembled in your product, when the sheet metal bracket is going to some assembly or a product and when you try to align it with some hole, with some bolt, so that time the dimensions are mismatching. So the proper alignment you may not get. But if you don't consider these kind of real-time, real-world scenarios, if you just design your hole with certain values and if you simply send it to the product, and those holes definitely won't align with the other neighboring components.
So this is, see the second scenario. So you can specify the hole diameter, tolerance, without considering allowance. And you can see, because of the bending in the real world, again, these things may go to, go for the misalignments. So again, rework is coming to picture. And in the ideal world, no need for any beads, emboss, or coining. So basically, these features are just strengthening your part. So if you don't give them, then you can't maintain the flatness in your design or in your sheet metal part.
So to maintain that flatness, we need to add certain strengthening features like bead, emboss. And then if you see the fourth one here, so no need for ribs, collars, according to the real world, or in the, sorry, ideal world. But in the real world, these things, ribs, collars, are needed. For example, if any pierced areas, any holes, any cutouts, those things will have less stiffness. So because of the less stiffness, the increase, it will increase the spring back. We will see what is spring back and what will happen.
So from the original shape or the original design, it will go to the, due to the spring back effect, the design or the shape will change because of the less stiffness. So if you want to keep that shape as it is, then the ribs or the collars are needed so that the shape will be maintained. So that is the ideal world and the real world scenarios, the differences. And again, we need to understand the material characteristics. You can see providing legs without understanding the grain structure of the blank.
The blank is nothing but the base of the, and if you don't understand that, and again, you can see if the legs are parallel to the grain structure, it will lead to the crack. A lot of differences between the ideal world and the real world. So to understand them better, all the engineering related factors before designing anything in the sheet metal. Right. So in NX, basically, I just categorized our course into eight lessons. And in the first lesson, we are going to see about tab and flanges, basically the base features.
And the second lesson, we will see about the corners, how to handle the corner areas. Next lesson, we will see about how to do bend, unbend, rebend. And next one, we will see about how to use punch and how to get the shapes. And in lesson number five, we will see about the convert to sheet metal. This is the one, suppose if you have a dumb body, you have imported it as a step or parasolid. How to convert them directly into a sheet metal so that you can unbend, rebend, flatten, flat pattern, all those things you can able to do even from the other software parts from the foreign data, not the native NX data.
Then how to make if you have any native data or some foreign data from the dump you have converted into sheet metal. And then how to make from these things the flat solid or a flat pattern. Okay. Basically, you have converted it as a sheet metal part. And after the sheet metal design is ready, the flat pattern or the flat solid, how to make it. That is our next lesson and how I can modify or how we can modify the design that will be in the resize category.
And then the lesson number eight is like stiffening, which is how to add more strength to our. These are the various lessons we need to. We will see the first one, the tab and the flanges today. I will start the NX to explain about these features. And we are in this category. We are using the Siemens NX to build the sheet metal design part. So the tab is the basic feature normally created by extruding a sketch along some particular thickness value by adding the material. So that is called tab.
So if you see here, you have some sketch and then the thickness is added to this. You will see the tab and flanges in NX. Okay. So the sheet metal applications you can find here in the application sheet metal. So this will provide tools to design state brick sheet metal parts. So you will see once you select that sheet metal, then you will find all the sheet metal related commands here in the home button. Right. So if you notice this home toolbar, this is the sequence we need to normally follow.
You can start with some sketches and then end to the flat pattern that is normally the last stage. So in our today's lesson, we are going to see the tab, how we can create various. So you can see here in the part navigator. So this is called part navigator. In the part navigator, we have a by default one coordinate system is available. This is our reference. Normally we call this as vehicle reference. And you can see the version currently what we are using, the toolbar, the main tab is called home.
Right. So let's start with it. So we have a coordinate system. And as we have seen in the first command, the presentation, the first command is tab. Okay. By extruding a sketch, basically. Before going to this, we can set some preferences here. So preferences, you see, once you choose the application as sheet metal, you can see the preferences sheet metal is available here. So in this sheet metal, you can see the properties. You can see the material thickness, the wind radius, k-factor. So some of the standards, some formulas, standard formulas we can define.
So how to treat the flat pattern and how to control your flat pattern display, what properties, validation, like that. We can set normally all the default values here. And these values can be used during our design automatically. So you no need to every time type the values when you design something. For example, whenever I design sheet metal, the thickness would be always 3 mm. That is my standard thickness. Then you can set here as 3. Then for all cases, it will come 3 as a thickness.
Similarly, the bend radius is equal to thickness or more than thickness. So those values you can set here so that in all examples, you will get the same values. Alright, so we have a coordinate system and you can just set your views, the standard views here. So now I am in isometric. Yeah. So let's start with a sketch and then add a thickness to create a tab. So here you have a command called sketch and it's asking an option on plane, on path. So we will take on plane.
So in which one you want to start with. This is the, let's say the top plane. This is your right side. And this is your front. So you can start from the, any plane. Basically, we refer the drawing and based on the orientations and the views, we will start with it. So I will start here with a top plane. So this is my plane and I say, okay, you can see now we are in the sketcher. So you will see the symbol here. Whenever you are working on the sketcher, you will see one flag symbol here so that it indicates that you are in this.
Now all the sketch tools you can see here. So using these tools, you can create any tab profile. So for example, now I am just creating one simple shape with all the dimensions here. So if you want to modify or you want to create some new dimensions according to your requirement, you can always create it or you can modify double click. So for example, I just want to modify this. So you can simply double click and then modify it. You can see I just double click that.
Now it is giving me an option here to modify. Got it. Similarly, this one. So, like that, you can modify the values according to your design requirement. So, now, after completing this, you can simply complete the sketch. Now, the sketch is ready. Now, you can go to tab. So, tab is the first feature always. So, tab. And this button is basically the reset button, we call. So, the reset. What the reset will do? It will bring all the necessary recommended settings, basically. So, all the default settings will come once you say reset button. So, then all the standard values will come here. Standard settings will come here.
Otherwise, sometimes what happens is, it always remembers the previous given values that may not be appropriate in all the cases. Okay. So, it's always a best practice to use this. And then you start with any commands. Okay. Now, what it is asking, you can see here, select the curve for your, you can always see here in the bottom, you see here, and this is the place where you can read all your guidelines here. So, this is the software. Just follow this guideline, so that you will get the result. Select the planar face or a sketch as a section geometry. Just select this. You can see the filters here, whether you want to go one by one, tangent, or single curve.
So, according to this selection, filters, your selection will happen. You see, now, the 3 mm thickness is happening here. You see, the sheet metal material thickness is 3 mm. You remember from where this is coming? It's coming from the preferences, sheet metal. Exactly. You see here, 3 mm. So, that is the same thickness you are seeing. So, whenever you double click this, you see here, it's going to the modification mode or edit mode. Suppose, if someone of you ask me how I can change this. Suppose, for example, I just want to change this particular value, then the answer is, you can simply select this equal symbol here.
Go to use local value. So, once you do this, and then you will have an option to change it. Say, for example, I just want to put 2.5 thickness, and it goes to 0.5. So, I want to cross-check this. You see, this is 2.5. So, you can again, if you want to link it back to the default value, then again go here as I have shown you, and then simply take use global value. Once you say use global value, now you see it gets changed back to the default sheet metal material thickness from the preference default, whatever we have given.
So, that is the tab feature. So, tab is the first base feature, normally created by giving some thickness to your sketch. Right. So, I just want to add some more feature into this. As a tab, go here. So, now it will go for the secondary tab. Okay. Let me select plane. Again, I've taken the top plane. Now, I just draw some profile like this. And see here, coming and joining with your base feature. And once we say OK, and now you see it just matches with it.
So, again, this is our base features called tab. Basically, adding some thickness by extruding your sketch along your vector. That is our tab. And then, the second one is, we need to discuss about, then what is flange? So, how to create the flange? So, you can see the flange will consist of one bent region and then a web. So, you see the web and the bent region. This is normally called as flanges. Let's see it in NX, how to create a flange. So, for example, I'm just hiding this sketch. It's a good practice always. If you don't need something, just hide that.
Okay. So, now we need to check about flange, where it is. So, flange. Right. Now, you see, as I already discussed, just do reset to bring all the default values. So, select the edge now. Say, for example, I just selected this. You see, the flange is created. You can simply adjust this. This is the bent region and this is the web region. Right. So, web region and the bend region. The bend region and the web region. So, you can use these dynamic handles to drag them or adjust this length or the dimension values.
And even you can adjust the angle, bend angle. See how easy it is. You can just like that. You can create code. So, it's a full type. Suppose, if I want only some area, then you can use this. Let's say, at center, at end, all those things. There are various settings available from one particular end, from both the ends. So, you can practice all those things.
Part 2
And now let me show you how the at-center option works. So let's say at-center, again select the edge, I'll take the edge somewhere here, you can see here some relief is created with all the values and the angle, you can adjust, adjust this wavelength and you can see the relief require and these values are also coming from the default setting. So you can change them, suppose you want to give it different values, as I already told you, you can always use local value and then change it and there are other settings, inside, outside, these are all dimension references, these things will change, the dimensions will change according to that, let's see, the material also same way, whether you want some inside material, outside material, you see now this gets moved, you see the dimensions and getting changed.
So basically, we will just refer the drawing and then see how exactly or what dimensions we need to follow, see when I go for material outside or material inside, I need a relief here, it's a round type of relief, so very easy, we need to just play with the values, the same output, we will see here how exactly they are modified, so at any point, whenever I do some changes, just double click here, just change it, change the angle, right, so very easy to build, so the modifications are very, very easy, so there is something called section here, and when you go here, section, then you can even edit this, so I'm just creating something, you can see the design got changed now, so like that, you can modify the cross sections, according to our requirement, by simply double clicking and then go to the section field here, and then go to edit page, and then just draw, and then just draw, modify, give all the dimensions, whatever you want to apply, and then simply update it, so that it will be updated, very easy to construct the flanges, right, so even you can change your backgrounds, if you want to work with some, let's say the black or dark background, so you can change it, and then you can work, even you can apply some colors, you want to change this with a color, let me change this, let's say control J, control J is the shortcut for the object editing my object display, just say okay, then you will get this dialog, and go to the color, and say apply to it, and see now it gets changed, got it, so control J, so control J, when you can use some filters, you want to use only some faces, or some entire body, or some particular point, or a sketch, anything, so I take the filter body, and now I am changing the color to the other one, colorful, so this is how we can create a tab, and the flanges, you see we have created one tab, and another tab, so the flanges, and we learn how to modify those cross sections, by simply editing it, so that is our flanges, so tab, you can see the various shapes, how they have made it, right, with the full edge, they have made it, only at certain level, they made it, with relief, they made it, flanges, tabs, and flanges, right, so here also, if you see, there is a small cutout here, and they have taken the edge there, and then from the edge, you can see the flange, it's made, you see wherever, there is a linear edge, and you can simply add your flange on that, and then the last step is flat pattern, so this is the flat pattern, and here you see the relief, and then the flat pattern, or flat solid, right, so that's what the tab, and then the next we will see, how to create contour flange, okay, okay, our next topic is contour flange, again, the contour flange tab, we have seen, and the contour flange, it's basically, the multiple tabs, if you just sweep a particular sketch, or edge, in some axis, you will get a contour flange, so the index will add the bins automatically, and those values are available, in our default settings, so you can use the contour flange, as the base feature, of a sheet metal part, or it can be a secondary feature also, right, so that is contour flange, for example, if you see, if you just draw a profile, like this, and if the sketch is extruded, in some vector, and you will get a flange, like this, so this is called contour flange, basically, a tab, and then another flange, again a flange, again a flange, again a flange, right, so the multiple tabs, right, so if you have any linear edge, and if you just draw a profile, you will get a flange, like this, contour flange, basically, you can just draw like this, and then you will extrude it, and you will get a shape, something like this, some of the examples, okay, so let's see this contour flange, how it works, and just deleting all the existing one, this is our coordinate system, we just create one base, contour flange, right, so you can see the contour flange, flange here, and you will see the first feature is base, there is no secondary available, once you create a base, then you will get a secondary feature also, right, so select the section curve or a plane, say for example, I just want to create it in a front view, so this is my front plane, I just want to draw the contour now, I just want to draw like this, or like this, and then, right, so I can adjust this, dimensions, and come out of the sketch, right, so you can see now, contour flange, you can draw any type of profile, and that it will create a flange, so for example, one more, one more, let's try directly, this time, you see, you are getting another one option here, secondary, right, so if already base is available, you will get secondary option also, now I want to create a one more base, or base contour flange, with the same view, right, so now, I am just creating the shapes, for example, just draw the profile, where you want to create it, come out of the sketch, and now you see, profile gets extruded, in one particular axis vector, and you will get a contour flange, so this is called contour flange, basically, sketch extruded in one particular, okay, let's see in the contour flange, you have another option, that is secondary contour, so what is the secondary contour, say for example, I just want to add a secondary contour, basically on top of base, so here it will take, it will ask, select the curve, or you can use this, I don't have any existing curve, I just want to create something new, okay, where you want to add your flange, on this edge, just select that edge, select that edge, and then you can see the orientation vectors, your x-axis, you can simply double click, to bring your z-axis, and the position of your plane, or the cross section, and so the x, y, and z, the right hand rule, x will go to the horizontal axis, and y will go up, and z towards you, normally we follow this orientation, so that the orientation will be perfect, you see now, the x-axis is in the horizontal side, and the y-axis in the vertical side, and z towards me, so once you rotate a little bit, you want to go back to your view normal, normal view direction, just use this option, or shift f8, orient to sketch, right, so now you see the t, the t is indicate the tangent, and the n is normal, and you see there is one small point there, that point you need to connect, you see now, this is the existing point, you see the tip there, 0.4 of datum on path 3, okay, existing point, and then you can simply draw the profile, okay, good, so come out of the sketch, and then see, so it's saying the edge is not valid in the finite, so I need to change the sketch cross sections, the tangential curve, and then align like this, and then come out of the sketch, and then see what's happening, I just check this out, okay, so I got the issue here, it says this part, this edge is not a valid edge, because in this case, we have given, in this case, we have given the opening, the circular edge, right, the opening edge, so here we cannot take it, so, but we can take this edge, the circumference edges, right, so let me try that one, yeah, so we have this, and let me add a flange over this edge, contour flange, okay, as we discussed, it's a secondary contour flange, so what we need to select, yes, we need to select the edge, and then we need to check about the orientations, which is x-axis, which one is the z-axis, yes, horizontal, y-vertical, z-towards, and then the position, where you want to keep it, you see, how easy it is, to reposition your sketches, starting point, okay, x, y, and z, right, okay, and then as we have discussed, the point, the point, and then we have to just draw the profile, same like our previous attempt, I just draw a line like this, vertical, and then one more horizontal, and now you see, it works, got it, so I can increase this, see, this is called secondary flange, understood, you see, the secondary flange is added, so let's repeat, one more here, let's say, contour flange, secondary, let's go now, inside I am going, and my x-axis, y and z, yes, and then now I draw a line, this point, connecting this point is very important, going, the n is normal, t is tangent, we just draw the profile.
Okay, let's see the result. Wow. You can simply play with these arrows. You see now it's going on the other side. How to control it and all the reliefs and the profiles you can control anyway. And you can at any point of time you can modify that. You can simply double click over here. This is my sketch section and I want to add one more profile. I just want to add something like this or like this and let's see how the shape comes back. Good. See all the default values are taken from the preferences. So this is called secondary contour flange. Right. So the first one is always the base and then you can add the secondary flanges. All these profiles can be flattened or flat pattern can be taken from these things. It means a blank or a flat solid. You will get it. Okay. So we just see about contour flange and next we will see what we have.
Let's see lofted flange. What is lofted flange? So we can use the lofted flange command to create a base or a secondary feature between two sections. So that is important. So where there's some linear transition between sections happens. So the two sections. So the two sections must be open and also on parallel reference planes. Okay. Parallel planes. So for example, so if you have one section something like this and another section and if you want to create a linear transition between these two sections, you can always go for lofted flange.
So that's one section. So that is our next topic. Lofted flange. Okay. Let's see this in. So this is our previous example. That is and base contour flanges. I'm just deleting all this. And this is my isometric orientation. Yes. So we have a plane. So we have a plane. And let's try our lofted flange. So what we need? We need a sketch. So let's create a sketch on this plane. Right. On this plane, I'm just creating a sketch. See the first one, both the sides, just arc. I just create an arc, arc one, and then come out of this. And then we need a parallel section. So what I will do is I will just create one coordinate system just parallel to this. I just need a, at some distance, you can simply select that arrow and drag it to a certain value.
And then you will get a new reference coordinate system here. Tatum coordinate system. This is the command I use. And simply I drag this along this axis. So now I draw another section on this particular sketch. This plane now, yes, x, y, and z. And now I just draw one more. Right. So I have two sections now. And now I will try for this lofted flange. Start curve and then the end curve. So very easy. Then the thickness taken from the preferences we know already creates. Yes. So at any point, you can modify this. So just double click. That is the only thing. Double click you have to do and change the profile to other shapes, dimensions. Just update it. You see, it gets updated.
So now we will go for the, uh, the other one. That is the one side. It is a, or the other side, it's like a rectangle. So how to do that? So just modify my sketch here. This, and in my second sketch also, I am modifying, just deleting this, use the profile command and create a profile. Now I want to connect these two sections. Now I want to connect these two sections. That's called lofted, lofted flange base. Start section. Yes. End section. And connected curve. Yes. You see now it gets connected and you are getting the material or the shape sheet metal design like this.
So the conditions are, uh, the section plane is parallel and the profile should be open profile. So that's what in our presentations and the explanation we have seen here. The two sections must be open parallel reference plane. So that's what, uh, we have seen in this examples. So that's what, uh, the lofted flange means. And the next topic is the hem flange. So what is hem flange? So you can use the hem flange command to modify an edge just by folding it onto itself, folding it onto itself for the purpose of safe handling or to increase the edge stiffness.
Okay. So that's the plans. It's always created as a secondary feature on a base part. So one base tab will be there and just to handle it in a safe way. We just fold it. So one base part and the hem plan will be created as a secondary feature and you can see something like this. So this is my base part on this edge. I am simply giving a hem like this hem feature like this. Got it. Some of the examples, the hem, then you can flatten it. So that is my hem flange. Okay.
Let's see this in NX. So what we need, uh, we need a base feature. We know how to create the base tab. So let's create this tab. So you can directly go and take this command without any sketch also as a first feature directly tab. And here you can go and take the sketch sketch section. I will just draw the section here, for example, on the right side view and just base feature. So base feature, nothing but the tab with some dimensions. You see the thickness is added. Now I have to go and say the jog. Got it. Not jog. Hem flange. The jog is our next topic. The hem flange.
Right. So these are all the different types. You reset. You will get the default one here. And what we need to give, we need to just give the edge. Just select the edge here. You see now that is called hem flange. So in the, in our, another example, so it should be, it's like this. And let's try the same now. And I'll just go and create a, let's say the sketch. Right. So this is my base feature now. So go to the tab. And the base I will take and then the section closed. So this is my second, this is my, for the first base, this is the second base. So that's why I take the base. Okay.
So I can hide all this unnecessary things using the control W shortcut. So once you use control W, you will see all the categories, which one you want hide, hide all, show all. And show me only the solid bodies. Okay. Now I need to put the hem flange here. Right. Got it. So it says it is not creating Y. So let me check this. What's the reason for this? Okay. So let's see why that gets failed in our case. Let's say hem flange. We have reset this and we have selected this and we are getting unable to create the body. And the reason is, this is the number, the value, maybe the reason.
So let's adjust this value and then see. So, and then go and select this type and see whether you are getting the results. So now it is fine. So the values should match and the proper settings we need to select. So then we will get the answer like this results. So we need to always play with the various values just to get the results. That's very right. So the next topic is our sheet metal command is jog. So what is jog? So use the jog command to create an offset or a step in your tab.
You need a step or an offset in your tab. Then we can always think about jog command. So normally it's used to provide the clearance or rigidity to your part. If I need some gap between the components, then we can normally give a jog. So the section for the jog must consist of single line. Only one line is needed in the planar phase. So it creates a jog by lifting the material on one side of the jog line, right? And the flanges and also it adds the flange between the two sides, right? So let's see how the jog looks. This is the jog information, right?
So we have a tab here and then we have just a line here and you can see in that line, you can see the bend is happening and two flanges are added. Flange one, flange two, it's getting added here. That is called basically the lifting of the material just to provide some clearance. So it can be like this, not necessarily directly on the top of the surface. It can be on some plane also from the plane. You can simply project and then you will get the shape something like this.
All right. So that is our jog. Let's see this in an X. How we can achieve this. So let me delete these things and I coordinate system. I'll create one tab. So my tab is ready. The base tab. And now I'll just add one line to just create. So it's asking jog code and sketch section. This we have already seen it. Directly we can create it. This will go as an internal sketch for this particular command. If you want to see them outside, then you can simply create a sketch first and then select them. That's also possible. Okay. Let's take a jog and I take the plane or a face. And if you want to select the plane, you can select it or face also can be selected.
For example, now I am simply existing this without doing anything. So now I just want to sketch it exactly on the plane. So just select the plane. Now it gets selected. Right. So you can just play with these values. How you want to do this? Which one you want to adjust? Left side or right side? Alright, so the same thing, you can do this using a parallel plane, in a certain height also. So for that, as we have already tried, we can create a coordinate system with certain height. And on this plane also, you can create a jaw coming out of the sketch. And then the target face, which face you want to use it, select it. Now you see, same way you can adjust this, which one you want to modify, this way, this way.
So basically, it needs a line, exactly on the same plane, or same surface, or it can be at certain height also. Both it accepts. Okay, so let's see how to create a jog with a relief, something like this, right? So I have just deleted the previous one. Now let's see the same jog. So we need to select the plane, we need a relief to this, not fully jog, not, I don't want to give the jog to the entire length. So in that case, so let's see first how you need it, this way, this way, or this way.
And there is option here, like extend your section, whether you want to extend this section or not, if I disable this, now you see it gives the relief, with the relief, you will get it. So you can adjust this. So you can simply play with the arrows for the different results, whether you want like this, like this, you see different options available. So this is jog, okay, so relief. So you can adjust those parameters. And here in the bend parameters, how much bend radius, all those things.
We almost cover all the options, the main options, tabs and flanges. So we'll cover some more options also in some of the other examples, how we can control some shapes, how to use some of the other parameters. And as we have discussed, the design for manufacturability is very important when we design the sheet metal parts, just to design the error-free designs, right? In that, similarly, I will just give one tip here on that. For example, the guideline for bends. So if you just keep the bends without proper fillets, so you see the fillets are missing here, it's again, it will create problems in our real scenarios, okay?
So always we have to give some fillets here. The part can be manufactured without any problems and it's a good practice, okay? This is incorrect and this is the proper one. So we need to always think about this, right? So we'll go to the next one. That is, we'll just summarize whatever we have seen today. We have just started with some basic informations, brief information about what is sheet metal design and which are the areas it is used. And then we discuss about how we can use this in NX, how to control all the parameters, default parameters in NX using default settings preferences.
And then we discuss about tab. Tab is nothing but a base feature and the first feature. And once you create a base feature, you can create the secondary tab also, all right? So the tab is the main one, the first one. We start with the tab and the final one will be the flat pattern that we have seen. And then once the tab is built and then we will go for the flanges. So the flanges will have a bend region and web regions. We have all the dynamic handles in NX just to modify them very easily, dynamically just drag it just to change the shapes, right?
And even we have seen in the flanges, I just want to see the, change the cross sections. We can go to the edit section, just change the cross section so that the profile will be changed. Similarly, we have gone for the contour flange. Again, base and secondary available in the contour. And in the contour, we just draw the profile, right? So, and then simply extrude it so that it will just go in that particular vector and it will create the multiple flanges or multiple tabs. So that is called contour flanges, right?
So that intersection point is important. So when you take where you are positioning it, where you are positioning the section, and where that intersection point is coming, the normal tangent, N, T, and all those things available. So accordingly, we have to create it. If something went wrong, you have to just modify those parameters so that it will be acceptable. Then we have seen about the lofted flange. Basically, the conditions are the section should be open. And two parallel planes needed, different cross sections you create, and between those two sections, linear transition happens, and then you will get lofted.
And then we have seen the hem flange. Basically, just to, for the safe side, on the edges, we just give one hem flange just to strengthen it and for the safe purpose. And then the jog, and jog is, again, it is just lifting of material from the definition surface, and you can define the jog on the same surface level or the face level, or you can create a jog at certain height. Whether you want to extend that section full length, you want to give a jog, or only that area you want to lift.
So you have a setting, we have seen the setting for that. So with this, I just conclude the lesson number one. We will see the remaining options and some of the other DFM-related factors in the sheet metal design in our next upcoming session.
Part 3
Welcome to the sheet metal training. Today we are going to see about the introduction about the CAD and also the sheet metal. So what is called the product realization process? So it means how the product is getting shaped. So basically the product realization process is mainly categorized into two types. One is design, another one is manufacturing. So using our digital CAD system or CAM or CAE tools, digital tools, so we can able to address this design and manufacturing phases or the types. So let's see some diagrammatic representation and if you notice here, this is the first type, the top one is our design and then the below one here, it is the manufacturing.
Okay. So if you see, it starts from the customer need. Basically the customer need is given from the marketing or from the feedback. Okay. So based on the need, we first define the specifications or the requirements. So what we need in our design. So based on that input, so we will do some feasibility studies, whether those things are possible or not possible and what are the manufacturing difficulties in it. All the factors are studied thoroughly and then it goes to some concept design. So we call this as a concept design and then from the concept, we will do the designing.
Say for example, in our sheet metal design also, the same way of collecting the requirements and then study the feasibility and then we will design the concept and from the concept, we will go and design the sheet metal part. And then that part will undergo different analysis. Okay. So there are different analysis like, right. So whether, so whether the bend radius is sufficient, whether this particular part can be formed, right. So all those sheet metal related analysis, right. So all those sheet metal related analysis we can do. Similarly, if it is a CAD model, so we can able to do the other type of analysis like class analysis, clearance analysis, reachability analysis, right.
So these are all various analysis we will do and we will finalize the part and then we will give us a 2D drawing to the shop floor. So then this is in the shop floor area and using the 2D drawings, then the manufacturing related activities will start. Like we will plan the process related activities and we call that as a process flow or process chart kind of. So here they will even, we will decide about the, what material we need to purchase and the procurement department, right. How to create NCCNC programs to manufacture that particular part in the tool room, right.
So basically this is the second phase of the product realization process that is manufacturing. And then finally it will be packed and then it will be shipped to the customer. And again the similar cycle will repeat now. So again we will collect the feedback from the customer and again the product will be improved again. So again the cycle will repeat. Okay. So this is how the design work will start actually. So that is called product realization process. So we study CAD, CAM, CAE to address all this kind of works, right. So that is basically the introduction about the CAD, CAM, CAE and how or what are the various steps available in various digital software, CAD, CAM, CAE softwares, right.
We will start the introduction, right. We will start the introduction in NX. So basically we need to understand the GUI that is graphical user interface before we start working on NX, right. So, so the first point is how to start the NX. So if you go to the start menu, you can see the start menu and you will see there is a folder in the start menu called Siemens NX, okay. So inside that Siemens NX, you will see the version of the software and once you select that software, it will launch, right.
So this is available in the start menu, start all programs Siemens. So that is the default. So that is the default. And if you want, you can create a shortcut from here so that the shortcut will be in the desktop. So from the desktop, you can directly double click and you can start. So not only the NX 10 version here or it may be NX 11 and NX 12 that is the latest. So this is the main version and apart from that, even we have some viewer related version here.
This will be just to view the data. So you, you, you are not going to do any modeling related task or drawing related things here or any CAD activities. Only it is for viewing. That's why it is called viewer. If you have a NX part PRT files, you can simply open it and view it without any modeling license or drawing license or CAE license. Okay. Layout is again a special related drawing workbench we can call. So just to do some complex, very large 2D drawings can be created using layout.
And there is another thing called mechatronic concept designer. In short, we call this as MCD and this is again, uh, similar to our, uh, kinematics or motion related workbench. Okay. So apart from that, you can see some of the license related tools and, uh, some release related documentation translators are available and, uh, some manufacturing related tools. Uh, this is the starting point of, uh, uh, NX. We can, the next is once you start the NX, right? You will see the first page, something like this. So this is called welcome page. Okay. Welcome to NX. Or we call it as gateway of NX. To open this gateway, we need a license. Without license, gateway also won't open. Okay. So to open the gateway also, we need a license, special license.
For it. And then whatever application you use for each and every application, it needs the license. So this is gateway and gateway will have only limited icons here. Like standard icons, new open, recent file open, how to set some preferences, right? And, um, here in the right hand side, it will give some tips here about applications, ribbon bar, resource bar, right? Some tips it will show when you move your cursor over on it. Okay. For example, if I move it over shortcut, so it will show here. So you are a new user, right? So kind of information, we will get it here.
Okay. So whenever you start a new NX session, it will just open a gateway, right? Right. So once you select a new file, right? Control N is the shortcut for creating a new file. Okay. And, uh, and, uh, by default, these names will come and you can see the file extension name, right? The extension of the file is dot PRT. So in NX, most of these work benches, you can see there are different work benches listed here. And most of these work benches ends with dot PRT. Okay. So if someone asks you file extension of NX or file type, we can say dot PRT.
So then, uh, how to differentiate it? The differentiate from the PRT is just from the name of the file. So we have to name it accordingly. Say, for example, if it's a model, then you have to name it as shaft model dot PRT. For example, if it's a drawing, again, you have to name it as it's a shaft drawing dot PRT, right? So like that, you have to name it. By naming only, we can able to differentiate what type of, uh, file it is or, uh, what work stored in that file, whether it's a model or a drawing or a CAE, right?
So CAE is not a problem because CAE will, uh, uh, have a different file extensions like, uh, FEM dot SIM kind of. So the. It's not a problem, but most of the applications ends with .prt only. And we can work with millimeters or inches here. So, while selecting the new file itself, we have to start this. We have to specify this. Once you select this as a millimeter unit afterwards, if you want to change it to inches, that it is not possible. Modifications or changing of units is not possible in NX.
Or we can say it is very complex things. Most of the cases, it won't work successfully. You cannot convert the millimeter into inches. Okay. And .prt is the extension. And this is a working folder. So, whatever folder you are choosing here, that is, becomes your working folder. All your files will be stored by default in that folder. And whenever you open a new file also, it will open from that path only. So, it is considered as a working folder. And we call this the topmost area you are seeing multiple tabs.
Now, these are all the different work benches. So, by default, you are seeing different work benches here. And in the model work benches, you will see modeling related task here. Okay. So, the routing related things also grouped under model. So, that is how you can create a new file. And next, we will see how to open a file. So, if you go to the open file, file open from the menu, you will see the different NX files here. You will see different NX files. And there are the thumbnail and the images are given here for better understanding.
So, you no need to just read the names. By just viewing these images, you can able to directly understand and open the file very easily. So, that is why whenever you go any working folder, and these images will be given. And you can adjust the sizes here, whether you need a small one or a big one, right? And this is the file name, type of file. And even you can change this file type to, let's say, for example, you want to open a JTE or a STEP.
And you can directly choose this from the file type. And so, that if you have any existing neutral format files, like IGS, STEP, parasolid kind of thing, you can directly open it inside the NX. During this process, it is like indirectly translating one format file to another format. And the other options what we are seeing here is, like, these are all called assembly loading options. Say, for example, whenever we load any product or assembly, whether you want to load only some structure, or you want to load only some main data, not the entire data, or there is another option called lightweight representation.
Whether you want in a lightweight format, lightweight format means it's mainly used for only the view purpose. So, it means in the exact format, the other format is called exact format. In the exact format, we can be able to see all faces, edges, right? The entire information of the data, you will see it. But in the lightweight, only the shape, you will see it. It means only a solid body or sheet body it recognizes. And if you try to select the edge, it may not be selectable, because it is in the lightweight format.
So, mainly when you work on the other foreign data or some neutral data files, like JTE or STEP kind of, we need to be careful about this, whether it is in the lightweight format or in the exact format. So, only in the exact format only, we can be able to see the available or required all informations. Then, what is the purpose of this use lightweight representation? It means when you open a complex assembly, if you open it with all the information, sometimes your system may not, system configurations may not support.
So, your system may hang, or it will take a lot of time to load your product. So, just to improve the loading process, we just enable this. That's why it is saying, by default, these two things are on. It means the partial loading and lightweight, so that your product will be loaded very fast. So, mainly useful when you work on very complex assemblies. Okay. That is about opening and file. All right. So, let's see it in NX about all this, whatever we have discussed now, and then we will come to the print file topic.
Okay. All right. So, this is called gateway. So, whenever you start the NX, you will see the gateway, and this is the information we already discussed. So, whenever you select these tips, the NX will show some of the tips here. So, if you are in the learning stage, you can always see what it says here. And, yeah, we have seen about new file creation. So, you can either use control N or new file directly. And this is what I spoke about, like modeling workbench or template.
We can call it as drawing template, we can call it as drawing template, list all the drawing-related activities. Simulation, if you see all our CAE-related activities. You can see there are a lot of CAE-related information. And the file types, you can see. The file extension will be .fem or .sim. Yes. Then the manufacturing workbench, again, it's a PRT, inspection-related, mechatronics, right? So, these are all different templates. And according to the template, the activities are grouped here. So, model-related template consists all the modeling, assembly, draw, sheet metal, right?
Shape studio. Shape studio is, again, a workbench used mainly for creating some industrial design. Or, we can say, some A-class surfaces, styling surfaces, right? Very advanced level of commands are used here in the shape studio just to achieve the very high accuracy, right? And routing-related topics are given, some empty parts also there, right? So, once we select the model template, and here you can see the millimeter or inches, right? What type of unit you want to use it, that, accordingly, we have to select it. So, once we select this, say, for example, once you select it as a millimeter, and after some time, you want to convert that into an inch part, it's really a difficult task, okay?
So, we need to be very careful on this, selecting the units, and information about this part, some properties they have given. Again, and you can see here, the model is, ends with .prt. Similarly, assembly, you see .prt. See, the name, name gets changed, right? So, similarly, when I go for drawing, again, you see .prt. So, only the name gets changed. So, by just seeing the name only, we can be able to understand what type of file it is. And this is your working folder from where you want to save your file, correct?
So, for example, now I just want to put here, right? So, you want to save it in the desktop, then select here, and be careful what type you are working. If you want to work on model, select it, model, and say, okay, do it. So, this is how we can be able to create a new file, okay? So, new file is created. And sometimes, under the Home tab, you may not see many icons. Then, you have to go to the application here, and then you have to choose Modeling or Ctrl-M.
So, once you choose Ctrl-M, then all the icons will be loaded here, okay? Otherwise, it will be loaded by default. Only in sometimes, or in very rare cases, sometimes it may not load it. And in those situations, you can just go to application and enable the Modeling Workbench so that all the icons will be available, right? So, this is how you have to create a new file. And the next one, what we have to see is about the open file. So, if you go to File, Open, Ctrl-O, and here you can be able to see the locations, right?
Got it? So, and if you have any NX files, that will list here, right? So, it's a NX file. You can see the analysis, the thumbnail image. You are seeing it. And this is what I have said. You can directly open many other format files also inside NX directly so that it will translate the other format files into NX file, okay? Once translating process is completed, it will be called as NX file after that. So, for example, if I want to open a JT file, just select the type as JT and then choose if you have any JT file here.
And then once the JT conversion is over, then that output is hereafter called as NX file only, okay? If you save the file, then... It will be saved as a .prt only, not like .jt because the conversion is already over. So directly you can use it or even from start all programs, you can use the Siemens NX, right? So you can even search it and then open it, correct? So that inside the Siemens folder also you will have a translator and from there also you can export the files from one format to other format.
So that is file open.
Part 4
Next thing is about printing, okay, we can print, we will do the print, okay, so if you want to, suppose we have some drawing or you have some model and you want to take the print out from NX, we have a direct command from file menu, we go to the file menu and we will say just print and directly, even you can convert this as a PDF here, so from the display, current display, we are just creating a PDF out of it. and what type of pen width we want to use and all those settings are available and according to these settings, your PDF will be created and if it is, if the system is connected with some printer and directly, we will take a print out of your model or print out of your drawing, that is the use of file print, okay.
Right, so the next is how to save my file, so to save the file, you have to again go to the file menu and here you have a save option and there are various save options available and save means if you just say save and it just saves a working file. So in NX, we have something called work part and entire assembly, okay, suppose you are working in a assembly context, it means your assembly is having multiple components, in that components you have only, you are working only one component, okay, one particular component.
So to work on that particular component, we have to make that component as work part, okay, and if we can in NX, we just double click the part so that it becomes work part and then you can start doing the changes in it. And if you want to save only those file, okay, okay, only that particular file, then you have to use save, okay, that's called saving the work part and any modified components also, other modified components also will be saved and the second option is it saves only that work part, okay, and this one, the first option is it saves the work part and also the other modified components, okay.
So if you do save all modified components and your working file, current working file, everything will be saved. This will save only the work part and save as will be used only for the single file, single part file in a different name if you want to save as, then you can use save as and save all is all part files, right. So if you open assembly and simply say save all, it saves all, it just won't see whether they are modified or not, it just simply saves all parts, okay, top assembly level parts also will be saved, only the components are saved.
So here all files will be saved, okay, and we can even save that as a bookmark file so that next time, once you select the bookmark, then it opens the, your previous loaded conditions or loaded files, okay, that's the purpose of bookmark, saving the bookmark. And then the last option they have given about save option, okay, so it gives some various options whether you want to save only the lightweight format or partial loading kind of, right. So how you want to save it, whether you want to compress your file during the save, whether you want to create some images during the save, those kind of settings we will see during the save.
So it will define certain actions when the part files are saved, so that's why, so you have to just go to file, save and then you will see these options. So mainly we use save and save all, okay, so these are the mainly used functions here. And similarly, while closing the file also, we have a lot of options like selected parts, only the selected parts will be closed, all parts, it closes all the files, right, so it means nothing will be there in the session. And save and save and close means before closing, it will save and then closes, save as and close, again it will ask a new name, save all and close, all files will be saved and then closed in a single time, okay.
And save all and exit, so it just saves and exit the next session, right, the name itself clearly explains all the functions here. And then close and reopen selected parts, this sometimes we will do when we work on assembly, we just using mouse button 3, we will use this option close and reopen parts. So whatever part I am selecting will be closed and opened again, right, so sometimes just to get rid of certain issues or certain glitches, we use this option, just close and open it again, okay.
So similarly, close and reopen all modified parts, so if the modified parts are more, then we will go for this option, so that it automatically considers all the modified parts. So all the modified parts are closed and again opened, right, so that whatever changes happen won't be saved here, okay. That is also another purpose, why I have to close and reopen. It means I don't want to save the changes I have made, I want to go back to the previous state, the opened state again, so then I use these options.
So the close file is very important and particularly when we use this all parts, we need to be very careful whether the parts are modified, whether you have saved it or not, right. Once you say all parts, softened, definitely it will show some parts are modified, whether you want to save it, then in that message you have to save okay. So if you buy mistake, if you say cancel, then without saving anything, it will be closed, okay. So if you really want, like, I don't want to save anything, then you can use, just say close all parts and for that alert message you can just say cancel it, so that all parts will be closed.
So based on your requirement, you need to choose whether you want to save the file or not, right. So we need to be very careful when we use on all parts, right. And then this is again, yeah, this is what I said, yes, save and exit, no exit, if you, whenever you say exit then accession or whenever you say close all files, you will get a message dialog box like this, whether you want to say yes, save and then close, on this case exit or no and then exit, okay.
So based on your selections, it will save and then your NX will be closed, without saving your NX will be closed, right. So that's the difference. Okay, so next we are going to see about mouse functions. Okay, so mouse functions in NX, it is, the mouse is playing very vital role, okay. So most of the functions are executed from the mouse. So we need to know what are the functions we can execute using the mouse. So this is very important, right. So let's see about the left mouse button, okay.
So the left mouse button, we call it as MB1, right, mouse button 1. So the left mouse button, right, it is mainly used to select some of the menus or icons or anything from the window, graphics window, you want to select something, you can use mouse button 1. Using the same mouse button 1, if you do double click, then it will be in the edit mode. You can edit something. Say, for example, you are creating a block or a cube and you want to edit it, just double click over the geometry so that it will be in the edit mode.
You will get, again, the dialog box, the block dialog box, if it is a sketcher, then you will get a edit mode of the sketch, right. So the double clicking, so for even for the dimension you want to modify, you double click the dimension two times, immediately you have to select multiple times so that it will be in the edit mode. So you can modify the parameters, so that is the main functions of mouse button 1. So it is used for mainly selections and even you can select some menus and also for editing, right.
So that is mouse button 1 and you will see some quick toolbar, something like this. Once you select the geometry using mouse button 1, you will see the quick menus. We call this as quick toolbar, in that quick toolbar, you will see some immediate operations here. It is also very easy so that you have no need to go to the menu and then select every time from the menu. So select it and select the options here so that your task will be executed. That is mouse button 1, left mouse, okay.
And middle mouse, okay. So the middle mouse, normally we call it as mouse button 2. In most of the cases, it is in the roller or scroll, scroller button, right. The scroll type button and in some mouses, it is the same like this, the flat type, right. So if you have a scroll button, you can by just simply scrolling this, we can zoom in and zoom out, okay, by scrolling. And then you can rotate it. Basically using mouse button 2, you can rotate the object. You can simply hold it or you just press it.
And by just holding and dragging, you can rotate your model. So based on the position of your mouse or the cursor, whether you are keeping your cursor in the bottom or in the side, somewhere here or somewhere here, and based on that, it will rotate in different axes, whether I want to rotate it horizontally only or vertical axis only, right? In all axes, I want to rotate. So based on that, the cursor position, your rotation will happen. That is also playing very important role. The position of the cursor also playing very important role while rotating your geometries, right?
So the next point is, suppose I want to rotate my product or geometry using certain point, right? So if you hold your mouse button 2 on some area for some time, so for example, if I want to rotate it, based on this point, I have to keep my cursor here, right? If it is a geometry, if it is my NX model, and I want to rotate it, and I have to keep my cursor here and hold my mouse button 2 for some time, then one fixed point will be created, and then using that point, your model will be rotated, okay?
So, and another important function of mouse button 2 is, it will execute the OK button, it will execute the OK button whenever you have any dialog box. Mainly, when the dialog box, inside the dialog box, if you see some green color button, and to execute that green button, you no need to move your mouse cursor, or you no need to use your mouse directly, or you no need to travel using your mouse, you can directly use mouse button 2. By clicking that mouse button 2, you will, means you will execute the OK button, or whichever button is highlighting in green color, that will be executed.
That is very, very time-saving option, okay? And then mouse button 3, or we call this as right mouse button, right? Mainly used to access some pop-up menus, okay? So whenever you right-click on certain areas, you will get some pop-up menus like this. Based on the location, cursor location, the pop-up options will be different, okay? Or based on which application you are having, based on that also, you will get some options here. For example, if you are inside the sketcher, and then you right-click, and you will get a finish sketch option, so that you are exiting your sketch, working sketch, right?
So like that, based on the application, it will list the pop-ups. And if you hold your mouse button 3 for some time, okay, you have to continuously hold it, hold your third button for some time, you will get a radial toolbar. We call this as radial type toolbar or quick toolbar. Again, you will see the shaded mode, wireframe, fit, view snap, right? So some analysis-related operations, some very important, very frequent operations are grouped there. So you can use or you can get those icons immediately in your third mouse button, using your third mouse button, right?
So these options will help us to execute the command without any issues, and you no need to search your commands here and there. All these things are available in your screen immediately by your mouse buttons, okay? Right, so zoom in, zoom out, you can use by just holding your mouse button 1 and 2 together, simultaneously hold these two, so that your zoom in, zoom out will be happening, right? Or you can use our control key and then mouse button 2, that also will execute the zoom in, zoom out operations, right?
And the pan operations will be again using mouse button 2 and 3, okay? Mouse button 2 and 3, so that it will be pan, okay? And similarly, using shift key and the mouse button 2. Shift plus mouse button 2, again you will do the pan operation or some other shortcuts you will execute using control shift. Control shift and mouse button 2, mouse button 1, mouse button 1, mouse button 2, mouse button 3 will execute certain shortcuts to you. Maybe I will show it to you in the next, how or what are the operations or commands we are getting it using this combination.
So, control shift and then use mouse button 1, you will get one set of command, mouse button 2, another set of command, mouse button 3, another set of command. So, like that, it will, you will get various operations or functions using this control shift combination. Okay, so let's see those things and that is some mouse functions, how to zoom in, zoom out, right? Mouse button 1, 2 and then some closing files, saving files, right? These are the things we have seen it. Let's see in NX now, all this.
Part 5
Let's see the saving option. You can see these are all close options, selected part, all part, right? And save options, save, save as, right? Save option, see? Save JT data, weight data, annotations. So where you want to save it, share the geometry on save. So these things are useful sometimes when we face certain issues, when we create or when we do some save options, okay? Saving, for example, when I do save, I'm getting an error. It's not allowing me to save it. Then I can enable this so that it will create certain things internally and it will allow me to save it, okay? So normally we use this kind of check marks whenever we find certain points are going or some issues are arising, okay?
Or some points are going in a wrong way. So during that time we can use those options and that is called save options, basically. So whatever you are enabling it here, these activities will happen whenever you do save. Otherwise, it won't happen. Say, for example, when I enable this and whenever I do save, it will save the JT data also for me, okay? Otherwise, it won't save the JT data. Similarly, if I say weight data, generate weight data, then it will create a weight data and it will show it to me and this weight information, we will see it under properties and here you can see weight.
So here you will see get the weight data, okay? So like that, during the save itself, we can enable certain activities so that those outcomes we will see later. So that is the purpose of save options, right? And similarly, the close here, these are all for closing, okay? The closing, saving. And, yeah, next is about mouse functions. So let's select or create a geometry. I'll create a block, for example. And the mouse button one is used basically to select the geometries like this, you see, select the geometry, right?
So once you select this, this is, when you select here, it deselects. This is selecting and in the empty area, if you select it, you will get a toolbar, quick toolbar. So, for example, I want to make a section of it, I can make a cut here. You see? Very easy. So disable this. So this is, I am just enabling all these things by using mouse button one. You see, once I select this, I am getting a different options. So whether you want to hide it or whether you want to create some sketch on it, yes, you see, sketch button.
So I am creating something and you can see now, you can, you do some measurements or you can do some undo, right? So this is mouse button one. This is for selection. So once I select this, then immediately I will get whether I want to convert this. Like that, the mouse button one is mainly used for selections and also for editing. If you double click it, you see now, it gets edited. Now I am just changing it. See, now you see, I changed this. So just double click, double click for modifications. Got it?
So double click, editing, double click. So editing my dimensions, right? This is the mouse button one purpose. So this is the advantage of using mouse button one. So we can execute selections. We can use editing. We can access quick toolbars like this. So based on the selections, my toolbar will give different options. So I can deselect them here. This is selection. This is a deselection, right? I can enable certain things and disable certain things, right? So I am disabling it now. This is enabling. This is disabling.
It means if I want to select only the end point, then I will enable end point. So that whenever I create, say, for example, a point, by enabling this, I can select the end point of this, right? End point of the edge. So if I have some circular edge, then I will select center of that circle only. Okay? These are all like object snapping. Okay? So in which condition, based on which condition you want to select. So for that, the mouse button one is very much used.
If these things are disabled, then these conditions, selecting these conditions are sometimes not possible and sometimes it is very difficult. Okay? This is totally enabling, disabling. Right? So we need to be, we need to be very careful whether they are enabled here, selected. So based on that, your selection will happen. Okay? That is mouse button one. So mouse button two is for rotation. You see now it's rotating. So based on the position, you see now it takes the axis symbol. It is rotating in y axis now.
And here, you see it's in the x axis now. You see the symbol get changed. And here, it is in all the directions. It's rotating. And if I hold it for some time, you see, only on that point it is rotating. For example, so now the point is created. And if I rotate it, you see, the geometry is rotated by fixing this point. Okay? Fixing this point, it is rotating. So when I use mouse button three, you will get options here. Right? So, orient views, rendering style.
Right? Refresh it. Mouse button one, fit. Right? So mouse button two is mainly used for rotation. And if you have any command, say, for example, let's say edge blend, for example, it's asking edges. I'm selecting the edge. And so normally, you will get an OK button here glowing. And then if you use mouse button two, it goes for the green button, the next edge actually. Okay? This one, the add new set is going. So this is highlighted in green. So that can be executed using your mouse button two.
So whichever button is glowing, that will be executed. Okay? And let's try with the sketcher, for example. Let's see sketch. And it's saying path. Okay, I'm selecting a path. And now you see, this OK button is highlighting. So now when I use mouse button two, the OK will be accepted now. So I'm not selecting using it like this. I just use mouse button two. You see now, OK, accepted. And then draw something. Finish this. So like that, we can use our mouse button two for accepting.
Select this. Mouse button three. So I'm deleting it. So this is selection. Mouse button three for getting other options. And delete it. So like that, we can use our mouse very effectively in NX. Okay? So that is mouse button two. So mouse button two is for accepting and rotating mainly. Then mouse button three. So mouse button three will create a pop-up menu. This is called pop-up. See? Pop-up. So right-click, various pop-ups we are getting. Based on the location, the pop-ups will vary. Right? So from where you are using your mouse button three.
Here, the datum coordinate system is selected. So different options. Just move the cursor over the object and then mouse button three directly. So you don't need to select it. Just move the cursor over the object and right-click. So now it is saying edit parameter. Okay? So it's modified. So I am just going to sketch also by selecting the plane. So by selecting the sketch here, again, I am getting different options. Or third button directly. I am selecting different options like, say, extrude. So it's very easy to control our selections and creations using mouse button three, two, mouse button two, and mouse button one.
Okay? So mouse button three is for mainly opening up the pop-ups based on the selections, based on the locations. So that is the important point. And then the combinations. Say, for example, mouse button one and two together. Zoom in, zoom out, mouse button 2 and 3 together, pan, or control combination, control plus MB2, zoom in, zoom out, shift plus MB2, pan, see, shift and MB2 combination, only MB2, mouse button 2, rotate, control MB2, zoom in, zoom out, shift MB2, pan, just MB2, rotate, okay, so this is again the mouse function only, combinations, and the another one is using control shift, so just hold the control shift, and now use mouse button 1, you see now, it is creating certain edge blend, revolve, hole, trim and all, and again control shift, mouse button 2, so it's saying circle, profile, some are empty, we can customize that, we can customize that, we can customize that to add certain actions here, possible, and then control shift, the third button, it's again giving some editing tools, particularly mainly useful for dumb bodies, the null parts, okay, like step IGIS, right, if we want to do certain changes, we can use these techniques to modify those dumb parts, non-parametric or unparametric parts, okay, and if you just hold third button for some time, you will get a quick tool bar, this is also we spoke about, shaded with edges, fit view, wire frame, shaded, okay, this is again editing the parameters, shaded, okay, so like that, you can just hold the third button for some time, you can execute the various functions like this, this is also very productivity tools, usability tools, very easily you can access functions in NX, that is very, very, very useful, very, very interesting also to work, okay, right.
Part 6
Okay. So next is about NX window layout. Okay. So there are different names. Normally we call in NX windows. And if you see here, this is the resource bar. We call this as resource bar. Sometimes it will be in the left side. Some places it will be in the right side. Right. But in this resource bar, normally we see all our part navigator, assembly navigator, right? Constraint navigator, some libraries, some history parts, some of the other templates, right? And inside the part navigator, normally we will see all the part history.
So this is resource bar and this is part navigator. And in this one is called is a quick toolbar. Okay. Fine. Because we can access some quick functions here. And even you can use this small down arrow to see the multiple options. And in this down arrow, you will see all the recent commands. Okay. Very useful. And this is for undo. How many functions you want to make undo. That's also possible. And this one. And this one. File, home, curve, analysis. These things are called tabs. Okay. These are all called tabs. And each and every tab, you will see the group of icons here. So they are called groups. Okay. The group of icons. And this is called command finder. You can find any command. So you want to find, for example, style blend. So you can just type here as style blend and just say search. Then it will search for you. Okay.
Okay. And then that is called command finder. And the entire thing is called ribbon bar, ribbon bar, the total things. And then this is top bar, top border bar. Okay. The entire thing is called top border bar. Basically, it consists of selection intents on which filter setting you want to select. Select. And some of the object snap methods. And fit zoom. Some standard operations. All these things are available in the top border. Similarly, we can create a border. Bottom border we can create. Left border we will create. Okay. Right side border we will create. And we will add these kind of icons also inside that. And we will use them.
Okay. Okay. And below you can see something called queue line. And also the status line. Okay. So this will give some queue lines. And this is the status line. So for example, select the line, select the plane, select points. These things are called queue line. Okay. So queue line will be there. Status line will be there. And the entire area working area we call that as graphic window. Okay. Graphic window. And this one what you are seeing is like a coordinate system. And this is called triad. And this is mainly showing the x axis of our coordinate, y axis of our coordinate, global coordinate system we can say, x, y and z axis. Right. So based on this only, we will design our components. Say for example, x, y means front view or x, y is top view. Right. So y, z is side view.
And whenever we create some design using some drawing and choosing the correct view or the plane is very important. So if you are seeing some top view and you want to put it in the top view means you have to select the x, y plane here. Then you have to create a sketch on it. Then only your view will go to the top. Otherwise, your drawing and your design won't match. Right. So that's why it is very important choosing the correct plane. So we need to understand the orientations and x, y, z directions for that. That's very important. And normally in the vehicle, the x is called, say, for example, if you are working on some automotive project, and the x is normally the length of the vehicle, basically.
And the y axis is your width of the vehicle, basically. So x is your length of the vehicle, and y is your width of the vehicle, and z is your height of the vehicle. Okay. So that's how we have to consider and we have to follow the design accordingly. Right. So the role of this axis is very important to understand the views and to understand what is my length side, what is my width side, and what is on my height side. Right. Okay. So the quick access bar, we have seen it. So we will see the mostly used commands here. And whenever you right click on it, I will use a small down arrow here, for example, you will see what are the icons you want to see it.
And if you don't want to see it, just disable, untick this. By ticking this, you can enabling this function. By unticking, you are disabling this. Okay. So that is called quick toolbar. Mainly use functions are grouped here. Yes. So command finder, we have seen in the layout, you can see the command finder, you type the value here, and then just say search it, then it will list all the related commands here. So since you type sweep, it puts here all the sweep related command, like style sweep, sweep along guide, variational sweep, and then sweep cage. Okay. So like that, it will list all the things and also it will show here from where you can execute this.
For example, in this case, it is available in your menu, insert, sweep, style sweep. So here you see menu, insert, sweep, style sweep. So that if you are in the learning stage, it's very useful to find out where exactly this particular command is available. So if you know the command finder is available. So if you know only the command finder, just type the command here, then search it, and see the location where it is, just follow this menu, insert menu, sweep, style sweep. So menu, insert, sweep, style sweep. So you reached it. So like that, the command finder is very much useful to know where exactly this particular icon is available. Okay.
So if you remember any other software command also, like pocket or you can just put that pocket name there and then it will list the related commands in NX. Okay. So not necessarily you, you are knowing only the NX related commands, not needed. If you know some commands from Ketya, some commands from SOLIDWORKS, just put that name here and then search for it. NX will throw the relevant related commands in NX. Okay. So very much useful for the learning people. Right. So this is what next is the part navigator. So in the resource bar, if you see, if you, this is the part navigator, basically it consists all the steps, whatever we have completed for our design. Okay.
So here the first feature is coordinate system, then sketcher, then revolve, edge blend, like that. So it's a visual representation, basically to understand the parent-child relationship. So the parent-child relationship, NX is following the parent-child relation. It means whenever the parent feature is changed, the child feature will be updated automatically. Say, for example, here the datum coordinate system is called parent because, why? Because this sketch is created on top of this coordinate system. So that when this coordinate system is modified, rotated little bit or moved, translated, this sketch also will be rotated or moved.
Similarly, this revolve is created from this sketch. And whenever there is a modification or any update in the sketch, definitely it will update the feature, the revolve. Okay. So like that, all the parent-level features will be updated or what the changes happens in the parent level will be updated in child immediately or automatically. So that's why we call this as parent-child relation. And all the parent-level features are always available on the top level. So parent will be on the top level. Children will be kept below to the parent level.
You cannot keep any parent-level feature below the child feature. For example, revolve is child for this sketch. And if you drag the sketch just below this revolve, you cannot move it. You cannot drag it. You will get an alert saying there is some timestamp-related problem. You cannot move it because it's a parent. Sketch is parent for the revolve. Okay. So always the parent will be in the top level positions. And you can do various operations like suppress by just ticking, unticking, and ticking this, enable, disable this.
You can suppress and activate the feature. Suppose you don't want to see certain features. You don't want to consider certain features for update or you don't want to see certain features in your geometry. You can disable. Say, for example, I want to see my part without any blends. So you can suppress them and then you can see them. Okay. By just removing the tick mark, you will see them. Okay. So that is the purpose. And mainly it is useful to understand what are the steps. Carried out and understand the parent-child relation, disable, enable the features and even you can use your editing. By just double-clicking this, you can edit, right? You can edit your features here by double-clicking in the tree. That is also possible so that the feature will be edited, even roll back your model.
If you double-click, say for example, you want to see up to the Revolve level, then you just double-click the Revolve so that all the bottom features will be deactivated and only the Revolve stage will be shown in the screen. It means it rolls back the shape up to the Revolve level. And if I double-click Extrude 5 here, then again it rolls back till this level. It means you will see Revolve, you will see the blend, two blends, and then one Extrude you will see. So, like that, you are rolling back. If you don't want to roll back, then don't do double-clicking. Just say mouse button 3 on top of the geometry and you will see two options. One is Edit parameter and another one is Edit with Rollback.
So, you use Edit parameter so that it won't roll back. You will see the final shape, but still you can edit the Extrude level, right? So, that is the difference between Edit parameter and Edit with Rollback, okay? So, in Rollback normally, the features will be deactivated, right? Basically, when you double-click, it will roll back your model. So, for rolling back and editing, we use Part Navigator. Very important, right? It's in the resource bar. Then this is called resource bar. And in the resource bar, you will have something called history. And in the history, you will see today what are the exercises you have done. So, all these things will be available here. And, for example, what I have done yesterday, what I have done in past week, all are grouped in this folder.
So, you have no need to search the files here and there. You can simply go here, see the images and select them and start your work immediately. So, finding the files are very easy. Identifying or locating the files are very easy by using this history method, okay? And next is about selection intent. Yeah, this is what I mentioned in the previous slides. The selection filter, the selection intent will have different filters, basically, different conditions. Based on these conditions only, your selection will happen, okay? So, for example, in this filter, if you use this arrow, you will see different list like this. And if I select the edge, then it will select only the edge. And if I select the body, for example, okay, solid body, then it will select only the solid body.
So, like that, even you can use color filters. You want to select only some particular colored object. Then you can use this and select color filter. Choose what color object you want to select. And only that particular color object will be selectable. The remaining colored object can't be selectable, okay? So, that is the purpose of using selection intent. And even this is already we discussed about the end point, center point. And based on the conditions, your selection will happen in the screen. So, whenever the selection is not happening in the screen, you need to always check about the filters. So, what condition you have given here, whether it is a point or a edge or a no selection filter means accept all. You accept all conditions.
And whenever there is a delay in the screen, say, for example, I am not selecting the geometry immediately. I keep the cursor here for some time. Then software will get the small dots like this. And then it will ask, okay, why you are doubtful, what you need it. And then it will ask you to select what you want to select. For example, in this case, I moved here and not selecting anything, waiting for some time. Then I am getting this small dotted, dotted, three dots cursor. And once I select that using mouse button one, I will get this quick pick here.
So, quick pick dialog box. Now, the software will assist me. Okay. What is your selection? Whether you want to select the extrude or whether you want to see the unite or some edge blends are there here, whether you want to modify those things or you want to revolve, modify some revolve. So, what do you want to select? These are all the features available here. So, the software will list all those things. From this list, you will select your required one very easily. Okay. So, whenever you are having some difficulty in selecting something, always wait for this quick pick or use this quick pick and then select the exact entity. Okay. From the dialog box.
It's very easy. It's very easy. Okay. So, let's see something now, whatever we have discussed in the NX. So, let's, we will see about selection intent. We'll see the resource bar, spot navigator, some command finder, right? The layouts. Okay. All right. So, let's see those things in NX. Yeah. Okay. So, let's see those things in NX. And yeah. So, you can see this is called resource bar. And these are all the navigator functions, assembly navigator, consign navigator, pot navigator. And in the pot navigator, you will see all the features, whatever you have created. And you will see the parent-child relation. Say, for example, whenever you select a block, the X2 is highlighted in blue color. It means this is child. Okay.
And you will see those things in the dependencies. Okay. And you will see those things in the dependencies. In the below, you will see here this block. And then the child is children. With the naming convention, you will see it. And even you will see all the details of it. What is the size or the dimensions? And if it's assembly, you will see even the preview of the component also here. Okay. And you will see in the detail. If you select detail way, then you will see all the faces level also. Okay. More detail level. And even you can go to the expand. And then there are multiple features. It will expand to the next level also. And then you will see it. Okay. Right. So, basically, this will help us to understand what is parent and what is child.
You can see whenever I select the child. You can see whenever I select the parent, the child is highlighted in blue color. So, let me select the child now. Yes. Once I select the child, it highlights on the parent here. You see the sketch is a parent. Also, block is also parent. So, whenever you suppress this parent, for example, I am suppressing this block. You see the child is deactivated automatically. Okay. Activate it. Activate it. So, whenever I deactivate the parent, the children will be deactivated automatically. Right. And all the parent features will be kept above the child level. Okay. Above the child level.
So, you can expand this. So, you can expand this. Collapse this. You can adjust this. Right. All are possible. And you will see the limit here. And from here also, you can modify. Say, for example, I just want to change this. Let's say minus 50. And you can change this. So, you can change this. So, you can change this. So, you can see this gets modified. Got it. So, from here also, we can edit this. Right. Possible. So, these are the purpose of the part navigator. So, main purpose is just to understand what are the features created. And also, we can understand the parent-child relation.
And also, we can modify this. Double click. You see a rolling back. This is called rolling back. Modification by rolling back. You can see now, when I roll back this up to the block level, I can be able to see only the coordinate system. Okay. So, if I double click and roll back this. Sorry. Now, we are in the sketcher. So, you need to come out of the sketch. You cannot double click the feature directly like this because you are in the sketch mode now. So, we need to cancel this, complete this, and then roll back this. Now, it's rolling back. So, if you want to see the block now without rolling back the model, then it means you need to edit it without roll back.
So, now, I don't see anything in the screen. So, it means it's rolled back. So, if I don't want to roll back the model, then do not double click this. Just use mouse button 3 and say edit parameter and this is edit with roll back. Double click. Okay. Edit parameter. Now, without any rolling back, you can able to see the model. So, that's the difference between edit parameter and edit with roll back. And these things, we can do it in the part navigator. Right. So, then this is the selection filter we spoke about. And if the selection filter says face, you cannot select.
Now you see it only highlight the faces. And if the selection filter says edge and you will see only the edges, the faces cannot be highlighted. So if I say no selection, all condition will be acceptable. Whether you want to select this and select this. So if I am in delaying in selection, say I am not selecting anything, I am waiting for some time. So the cursor gets changed with three small dots. That time mouse button one. Then it says, okay, what do you want to select? Block or edge or face or the other face or the entire body. So if I want to select the entire body, then select this. Then the body gets selected. Got it? So once the body gets selected, then you can do hide or delete the other options. You can do it. So that's how the quick pick works. Okay. So whenever there is a delay, mouse button one, what do you want to select? The sketch.
You want to edit this sketch. Edit it. Got it. So like that we can able to work on the selections. Right? Filters. So similarly here, there are when you work on assemblies, normally this is useful whether you want to select some references from the entire assembly or only some particular working part or some other component also. So based on this condition, your selection will happen. So totally whatever selection you are doing, that is totally based on this selection intent. So the color filter will be available here. You want to select only certain colored object. Then go here, color filter. What type of color you want? Even you can use inherit from object. It means it will inherit the color. Currently it is in the black color.
So you can select the color filter. So you can select it from here. So you can select it from here. Inherit from the object. Select this. Now you see it's called medium steel color. And this is the ID of the color. Okay. If you change the color ID, the color will change here. So 129 is the default color. And then when you select this, and then only that particular color object will be selected. You see now, the others are not getting selected. Right? That is the purpose of color. That is the purpose of color filter. Got it? That is the purpose of color filter. And this is my reset, resetting my filter so that everything can be selected. And whenever I use color filter and generate this color, only this colored object will be selected now.
See now. Only that particular color filter is not able to select it. Why? Because now the color filter is enabled. So to disable that, just use reset filter. Done. So now you can just drag a window. Now everything will be selected. Because you have disabled it. Reset this. So that's how the color filter works. So that is selection intent. So we have seen about selection intent. We have seen about quick pick selection. So that's okay. Okay. Good.