Recorded workshop · ELECTRICAL

Implementation of Power Electronics Converters for Solar Energy Application

Held 31 Jan 20211 video

Notes written by Skill-Lync from the recording · Updated 17 Nov 2026

What this workshop covers

This workshop on power electronics converters for solar energy covers PV market trends, grid-connected vs standalone systems and the converters they need. Recorded by Skill-Lync in January 2021, the 26-minute session spends its first half on context: renewable energy targets, India's solar capacity and goals, hybrid PV-wind-hydro systems, trends such as AI-based demand response and blockchain energy trading, battery storage costs, rising demand from electric vehicles and solar payback times.

The technical half explains why a PV system needs power electronics. Panels and batteries produce DC, so an inverter is needed for household loads or the grid, a DC-DC converter raises the panel voltage, and a bidirectional DC-DC converter charges and discharges the battery that steadies voltage and frequency in islanded mode. It outlines maximum power point tracking, buck, boost and buck-boost converters simulated in MATLAB, closed-loop control on a microcontroller programmed through LabVIEW or Code Composer Studio, newer single-stage and multilevel topologies, real-time simulators for testing, and entry-level and senior job roles.

It suits electrical students who want a map of the field. Despite the title, no converter is designed, simulated or built in the session, and the market figures are the instructor's as of 2020-2021.

Chapters

  1. 0:00 Why power electronics matters for solar PV
  2. 1:31 Renewable targets and the case against coal
  3. 3:52 Hybrid systems and India's solar capacity in 2020
  4. 6:06 Solar trends: AI, blockchain and rooftop prosumers
  5. 10:26 Battery storage, EV demand and payback time
  6. 14:06 Grid-connected vs standalone PV with battery storage
  7. 16:46 Newer converter topologies and real-time simulators
  8. 19:17 MPPT, DC-DC converters, inverters and their control
  9. 21:04 Job roles and prerequisites

Key points from the session

  • A PV system runs in one of two modes: grid-connected, where the utility grid is available, or standalone (islanded), used for remote and rural sites the grid cannot reach economically. Every design starts by deciding which mode it must support.
  • Because solar output is intermittent, a battery energy storage system (BESS) is added to stabilise voltage and frequency. The battery is both charged and discharged, so it needs a bidirectional DC-DC converter rather than a one-way one.
  • The conventional chain is panel, MPPT and DC-DC boost stage to reach the required voltage, then an inverter to produce AC for the home or grid. The instructor points to research on single-stage designs that remove the boost converter, and on Z-source inverters, matrix converters and multilevel converters.
  • Implementation has two parts: the power stage and its control. Converters can be run open loop for study, but a real converter is run closed loop, with the controller on a microcontroller programmed through tools such as LabVIEW or Code Composer Studio.
  • Before building hardware, the instructor recommends validating the control in a real-time simulator such as OPAL-RT, Plexim or RTDS, and names hardware-in-the-loop testing as a core skill for senior power electronics roles.
  • On storage, the instructor says lithium-ion batteries outlast lead-acid and need less maintenance but cost more upfront, and cites a 35% fall in lithium-ion cost since the first half of 2018 and 76% since 2012.
  • The instructor cites PV plant lives of 25-30 years, payback of 7-15 years across the US, and India's target, as of 2021, of 100 GW of solar by 2022 including 40 GW of rooftop solar.

Why does a solar PV system need power electronic converters?

Solar panels and batteries produce DC at voltages that vary with sunlight and charge level. A DC-DC converter raises the voltage and tracks the panel's maximum power point, an inverter turns DC into AC for household loads or the grid, and a bidirectional converter lets the battery both charge and discharge.

What is the difference between grid-connected and standalone solar systems?

A grid-connected system feeds its output into an available utility grid. A standalone, or islanded, system supplies a site on its own, typically a remote village or building where grid power is unavailable or uneconomical. Standalone systems rely on battery storage to hold voltage and frequency steady when sunlight changes.

What should I know before learning solar power converter design?

The instructor lists basic electrical engineering and power calculations, some power electronics with a focus on semiconductor switches, and ideally the ability to build MATLAB Simulink models. Microcontroller programming is an advantage because converter control runs on a microcontroller and is tested in closed loop, often with real-time simulators.

Where to go next

Who should watch

For Electrical Engineers

A 31 Jan 2021 workshop recording from Skill-Lync on ELECTRICAL. For a structured course with projects on this topic, see Skill-Lync's electrical engineering courses.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.