Recorded workshop · ELECTRICAL

VLSI - The Need For Hour

Held 28 May 20211 video

Notes written by Skill-Lync from the recording · Updated 17 Nov 2026

What this workshop covers

This VLSI workshop is an overview of the semiconductor industry, front-end vs back-end (physical) design, the main EDA tools and VLSI job roles for freshers. Recorded by Skill-Lync in May 2021, the 20-minute talk starts with what the semiconductor industry is, a short history from the transistor radio to smartphones, a look at Singapore as a regional hub, and the four big end markets: mobile phones, automobiles, consumer products and computers.

The technical core explains VLSI as millions of transistors on one chip, the split between design and verification, and how the front-end team turns customer requirements into VHDL or Verilog code that the back-end team converts into a physical layout of metal layers for the fab. It then covers why physical design grew in importance as process nodes shrank, which tool vendors dominate, four families of jobs and the companies that hire.

It suits electronics and electrical students weighing a VLSI career. It is a talk with no tool demo, and analog design, RTL coding and the steps inside physical design (floorplanning, placement, routing) are not taught. Company and market details reflect 2021.

Chapters

  1. 0:28 What the semiconductor industry is and its history
  2. 2:56 Singapore as a hub and the four end markets
  3. 4:54 VLSI basics: design vs verification, front vs back end
  4. 6:52 Back-end physical design: from circuit to layout
  5. 8:26 Why physical design matters as nodes shrink to 7 nm
  6. 10:12 EDA tools: Cadence, Synopsys, Mentor and Ansys
  7. 11:22 Design and verification engineer roles
  8. 13:34 Application engineers and fab manufacturing roles
  9. 16:03 Major recruiters and how freshers get in

Key points from the session

  • The chip flow as taught: customer requirements go to the front-end team, which writes the circuit in VHDL or Verilog; verification checks it; the back-end team turns it into a physical layout; the fab manufactures the chip; and the chip is tested before it reaches the customer.
  • Front-end and back-end design describe the same function in two forms: logic gates and circuits at the front end, geometric shapes on stacked metal layers at the back end, with power, ground and every connection drawn out.
  • The instructor dates the rise of physical design to the 1990s and ties it to shrinking transistors, from 180 nm down to 7 nm by 2021. Smaller geometries mean more optimisation of wires and nets and more physical design violations to fix.
  • Four EDA vendors are named: Cadence and Synopsys for design, physical design and verification, Mentor Graphics for verification, and Ansys for power analysis. The instructor says most design houses hold both Cadence and Synopsys licences.
  • Digital roles are front-end design, physical design, FPGA, DFT (design for test) and IP design; analog and mixed-signal and RF are separate tracks. Verification engineers check the front-end design, validate EDA tools for the company and verify bought-in IP.
  • Field application engineers at EDA companies install tools at design houses and support their engineers, and the instructor describes them as in high demand. Fab and clean-room engineers work in shifts and only exist where there is a fab, such as Taiwan, the US, Europe and Southeast Asia.
  • The instructor cites Singapore's first semiconductor company in 1968 and, in 2021, more than 60 companies, about 35,000 employees and 7% of the country's economy.

What is the difference between front-end and back-end VLSI design?

Front-end engineers work with the customer's requirements and describe the circuit in a hardware description language such as VHDL or Verilog. Back-end, or physical design, engineers take that verified circuit and convert it into a physical layout of metal layers that the fab can manufacture. The chip's function stays the same; only its representation changes.

Why has physical design become so important in VLSI?

As process nodes shrank from 180 nm towards 7 nm, the distance between source and drain fell and designs became much harder to build correctly. Wires and nets must be optimised more tightly, which creates more physical design violations to fix, so companies and EDA vendors put far more effort into the back-end stage.

What jobs can I get in the VLSI industry as a fresher?

The session groups jobs into four families: design engineers (front end, physical design, FPGA, DFT, IP, analog and RF), verification engineers, application engineers at EDA tool companies, and manufacturing engineers in fabs. Large chip makers and EDA firms run internships and graduate programmes, and smaller companies and startups also hire freshers.

Where to go next

Who should watch

For Electrical Engineers

A 28 May 2021 workshop recording from Skill-Lync on ELECTRICAL. For a structured course with projects on this topic, see Skill-Lync's electrical engineering courses.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.