Recorded workshop · ELECTRICAL

Electronics in Automotive Systems

Held 24 Mar 20212 videos

Notes written by Skill-Lync from the recording · Updated 17 Nov 2026

What this workshop covers

This recorded workshop explains electronics in automotive systems: ECUs and sensors, airbags, ABS, traction control, ESP, infotainment and career skills. Part 1 opens with the rising share of electronics in a car's cost (the instructor's chart projects about 50% by 2030), the main application areas, early milestones such as Volkswagen's 1968 electronic fuel injection and GM's 1977 spark-timing ECU, the messages an ECU processes, common engine sensors and the three kinds of sensor output. It then separates passive safety (after impact) from active safety (before impact) and spends time on airbags: the conditions for them to work, the types, and how they inflate.

Part 2 explains how ABS uses cadence braking, its components, threshold and cover braking, how traction control differs from ABS, and electronic stability programs, then moves quickly through infotainment, navigation, connectivity, the instrument cluster, body control module and in-vehicle networks. It ends with the policy context in India as of 2021 and the skills the instructor recommends.

It suits electrical and electronics students new to automotive electronics. Recorded by Skill-Lync in March 2021, it is conceptual: there are no circuits, code or tool demos, and the Q&A is not part of the recording.

Chapters

Part 1

  1. 1:58 Rising share of electronics in a car's cost
  2. 3:32 Application areas: body electronics to infotainment
  3. 4:24 First automotive computers: VW 1968, GM 1977
  4. 5:32 ECU messages and common engine sensors
  5. 7:10 Sensor outputs: analog, digital and PWM
  6. 8:04 Passive vs active safety systems
  7. 11:46 Airbags: prerequisites, types and inflation
  8. 17:47 ABS, TCS and ESP history, and cadence braking

Part 2

  1. 0:09 How ABS modulates brake pressure on each wheel
  2. 0:44 ABS components: speed sensor, valves, pump, controller
  3. 3:05 Threshold braking and cover braking
  4. 3:50 Traction control and how it differs from ABS
  5. 5:09 Electronic stability program
  6. 6:38 Infotainment, navigation and connectivity features
  7. 8:08 Instrument cluster, body control module, networks
  8. 12:24 India's EV policy context: NEMMP 2020 and FAME
  9. 15:59 Skills, career path and target companies

Key points from the session

  • Sensors feed the ECU, which is a microcontroller inside. Every sensor gives one of three output types: analog (continuously varying), digital (discrete values) or PWM (square waves that digitally encode an analog value), so learning to interface those three covers most sensors.
  • Passive safety systems such as seat belts and airbags act after an impact to protect occupants and do nothing to prevent the crash; active systems such as ABS, ESP and lane departure warning act before impact to avoid it.
  • Airbags protect as intended only if occupants sit correctly, wear seat belts, the car is not overcrowded and no child sits in front facing the rear. The airbag ECU acts on a crash signal from an acceleration sensor, and seat belt status helps it avoid firing single-use airbags in a parked, empty car.
  • ABS automates cadence braking: when a wheel decelerates faster than the car possibly could, the controller drops brake pressure on that wheel through its valve, then raises it again, keeping the tyre near the lock-up threshold. The instructor says some systems cycle up to 15 times per second, which is the pulsing felt in the pedal.
  • ABS stops wheels locking while braking; traction control, also called anti-slip regulation, stops driven wheels spinning while accelerating by braking the spinning wheel or cutting torque, using the same wheel speed sensors. ESP works with both to keep the car stable in a sudden swerve.
  • The firsts the instructor lists: Bosch ABS in 1978, traction control in 1986 and ESP in 1995; Volkswagen's transistorised fuel injection in 1968; and GM's single-function spark-timing ECU in 1977.
  • Skills the instructor lists for automotive electronics jobs: strong C, embedded systems starting on an 8-bit and moving to a 32-bit microcontroller, sensor interfacing, I2C, SPI, CAN, LIN and UART, RTOS, control systems, electrical machines, and signal conditioning between 3.3 V or 5 V microcontroller outputs and actuators.

What is the difference between active and passive safety systems in a car?

Active systems work before an impact and try to prevent the accident, for example ABS, traction control, electronic stability programs and lane departure warning. Passive systems work after an impact and try to protect the occupants, for example seat belts and airbags. If the active systems cannot prevent a crash, the passive systems take over.

How does an anti-lock braking system work?

Wheel speed sensors let the ABS controller spot a wheel decelerating too fast, a sign it is about to lock. A valve in that wheel's brake line holds or releases pressure, and a pump restores it, cycling rapidly. This keeps each tyre near peak grip, so the driver can still steer while braking hard.

What skills do I need for a job in automotive electronics?

According to the instructor: strong C programming, hands-on embedded systems from 8-bit to 32-bit microcontrollers, interfacing analog, digital and PWM sensors, embedded protocols such as I2C, SPI, CAN, LIN and UART, plus RTOS, control systems, electrical machines and signal conditioning. Raspberry Pi and IoT projects help for connected-car roles.

Where to go next

Who should watch

For Electrical Engineers

A 24 Mar 2021 workshop recording from Skill-Lync on ELECTRICAL. For a structured course with projects on this topic, see Skill-Lync's electrical engineering courses.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.