Free embedded systems courses with certificate (2026): 13 checked, and the 1 that gives a free certificate

You can learn embedded systems free from IIT Kharagpur on NPTEL, UT Austin on edX and long YouTube courses, but a free certificate is rare: as of 21 November 2026, only Simplilearn SkillUp's 1-hour overview of the 13 options we checked lists one at no cost. Six charge for the certificate (NPTEL's exam is ₹1,000) and six give none.

Checked 21 Nov 2026 · 13 free courses, each checked on its own page (linked) · Written by Skill-Lync, whose free courses are included

The short answer

  • You want the best free course and don't need a certificate: Quantum Leaps' Modern Embedded Systems Programming Course on YouTube: 58 videos by Miro Samek, from C on an ARM Cortex-M board up to interrupts, RTOS and state machines. Over 2.6 million playlist views.
  • You want an IIT certificate at low cost: NPTEL's Embedded Systems Design (IIT Kharagpur, 12 weeks) or Embedded System Design with ARM (8 weeks): free lectures, ₹1,000 for the optional proctored exam. The latest runs we found were January to April 2026 and January to March 2025, so watch for the next one.
  • You want a free certificate today: Simplilearn SkillUp's free embedded systems course: 1 hour (types of embedded systems, microprocessor vs microcontroller, CISC vs RISC, memory) with a completion certificate listed in what the course includes. It is an overview, not training.
  • You want to write code on an STM32 now: Skill-Lync's free first lessons of Embedded Programming Essentials: installing STM32CubeIDE, creating a project, and C basics with standard I/O, with transcripts. Start the free lessons →
1free certificate or badge
6free to learn, certificate paid
6no certificate (or ask)

Every free embedded systems course we checked

"Free" here means you can watch or read the whole course without paying (a few are free only for verified students, as the Format column says). Certificate terms are as published on 21 Nov 2026; providers change them, so read the provider's page before you start. Skill-Lync's own free courses are listed last and shaded.

Provider and courseLengthFormatCertificateSoftwareLevelBest for
NPTEL (IIT Kharagpur)Embedded Systems DesignTaught by Prof. Anupam Basu12 weeksFree recorded lectures and weekly assignments; optional proctored exam at a centrePaid certificate Paid: ₹1,000 for the optional exam; you need at least 10/25 in assignments and 30/75 in the exam. The latest run was January to April 2026 (exam 25 April 2026)None (theory course)UndergraduateThe design side: processors vs ASICs and FPGAs, low power, RTOS basics and hardware-software partitioning
NPTEL (IIT Kharagpur)Embedded System Design with ARMTaught by Prof. Indranil Sengupta and Prof. Kamalika Datta8 weeksFree recorded lectures with ARM board demos and weekly assignments; optional proctored examPaid certificate Paid: ₹1,000 for the optional exam. The latest run we found was January to March 2025A low-cost ARM microcontroller board (recommended, not needed to watch)UndergraduateProgramming an ARM microcontroller, with hands-on demos
edX (UT Austin)Embedded Systems - Shape The World: Microcontroller Input/Output8 weeks, 8-10 hours a weekSelf-paced; free audit track with limited access, or a paid verified trackPaid certificate Paid: US$199 for the verified certificate; auditing is free with no certificateA Texas Instruments LaunchPad board for the labsBeginnerThe best-known university embedded course: C, I/O, interrupts and real lab work on a board
edX (Arm Education)Embedded Systems Essentials with Arm: Get Started with the micro:bit6 weeks, 3-6 hours a weekSelf-paced; free audit track with limited access, or a paid verified trackPaid certificate Paid: US$99 for the verified certificate; auditing is free with no certificateBBC micro:bit (Arm says its Mbed tools reach end of life in July 2026, which may affect older labs)BeginnerA gentle start on an Arm board, from the company that designs the cores
Great Learning AcademySTM32 Microcontroller Programming Essentials2.25 learning hoursSelf-paced video modules with quizzes; free accountPaid certificate Paid: "a non-refundable fee is applicable" for the certificate (amount not shown)STM32CubeIDE, STM32CubeMXBeginnerA short tour of setting up an STM32 project with CubeMX
Simplilearn SkillUpFree Online Embedded Systems Course1 hour of self-paced video; 90 days of accessSelf-paced video lessons; free accountFree certificate Free: "Completion Certificate" is listed under what the course includesNoneBeginnerA 1-hour overview: types of embedded systems, microprocessor vs microcontroller, CISC vs RISC, memory
AlisonIntroduction to Embedded Systems Design10-15 hoursSelf-paced video course with assessmentsPaid certificate Paid: an optional digital or printed Alison certificate (price not shown on the course page)None (MSP430 microcontroller theory)Intermediate (Alison's label)Embedded design explained on the TI MSP430 microcontroller
Quantum Leaps on YouTubeModern Embedded Systems Programming Course2,603,489 playlist views as of 21 Nov 202658 videosYouTube playlistNo certificate NoneAn ARM Cortex-M board and a free IDEBeginner to advancedLearning how C maps to the machine, then interrupts, RTOS and event-driven design, from Miro Samek
Gene Schroeder Tech on YouTubeBare Metal Embedded Programming: Theory and Practice Using STM32159,904 playlist views as of 21 Nov 202626 videosYouTube playlistNo certificate NoneAn STM32 boardBeginner to intermediateWriting registers directly, without vendor libraries, on an STM32
Skill-Lync GrowEmbedded Programming EssentialsFirst 3 of 68 lessons free, 1 h 42 minFree video lessons with transcripts; leave your name and phone once. The rest of the course is paidNo certificate None for the free lessons; the paid course includes a Skill-Lync certificateSTM32CubeIDEBeginnerEmbedded C from the first install: STM32CubeIDE, a new project, C basics and standard I/O
Skill-Lync GrowFundamentals of Embedded SystemsFirst 3 of 12 lessons free, 3 h 28 minFree video lessons with transcripts; leave your name and phone once. The rest of the course is paidNo certificate None for the free lessons; the paid course includes a Skill-Lync certificateNoneBeginnerThe big picture: embedded systems in mechatronics, ARM MCU architecture, and sensor-actuator systems
Skill-Lync on YouTubeIntroduction to Firmware Development31,441 YouTube views as of 19 Nov 202666 minutes of videoRecorded course, free on YouTube; plays on skill-lync.com after you leave your name and phone once, with a chapter guideAsk Not issued automatically. The page has a form to ask a counsellor about oneNoneBeginnerMicrocontroller vs microprocessor, storage classes, startup code, embedded C and SPI in about an hour
Skill-Lync on YouTubeBuild an IoT Application in 2 Hours4,415 YouTube views as of 19 Nov 20262.2 hours of videoRecorded course, free on YouTube; plays on skill-lync.com after you leave your name and phone once, with a chapter guideAsk Not issued automatically. The page has a form to ask a counsellor about oneOnline ESP32 simulatorBeginnerA first hands-on project without hardware: an ESP32 in a simulator driving LEDs, a relay, sensors, a servo and MQTT

Can you practise embedded systems for free?

  • Wokwi (Community plan): €0 a month: unlimited simulations of Arduino, ESP32, STM32 and Raspberry Pi Pico boards in the browser, but projects are public. Paid plans start at €7 a month.
  • Arduino IDE 2: free and open source for Windows, macOS and Linux, plus a free browser editor. The fastest way to blink your first LED.
  • Keil MDK Community Edition: Arm's toolchain: "All tools are free to use for non-commercial projects under the Community Edition license." Commercial work needs a paid licence.
  • FreeRTOS: the most common small real-time OS, "distributed freely under the MIT open source license", with ports for most microcontrollers.
  • PlatformIO: open-source build system and VS Code extension for hundreds of boards, with "no license fees, no legal contracts".

A free embedded systems learning path, in order

  1. C, properly (weeks 1-2). Pointers, bit operations, volatile, structs and fixed-width types such as uint8_t. Most embedded interviews start here, and most beginners are weakest here.
  2. Blink, then read a button (week 3). Use an Arduino or an ESP32 in Wokwi if you have no board. Then do it again on an STM32 or an ARM board by writing the GPIO registers yourself, as Gene Schroeder's playlist shows.
  3. Timers and interrupts (weeks 4-5). Follow Quantum Leaps' lessons on interrupts. Work out a timer yourself: a 16 MHz clock with a prescaler of 16,000 ticks at 1 kHz, so a 1-second interrupt needs a period of 1,000 counts.
  4. Talk to a sensor (week 6). Read a temperature or IMU sensor over I2C or SPI and print values over UART. Sketch the waveform from the datasheet before you write the code.
  5. One small RTOS project (weeks 7-8). Two FreeRTOS tasks, one reading the sensor and one logging it, sharing data through a queue. Put it on GitHub with a wiring diagram and a short video.

Is a free embedded systems certificate worth it?

The SkillUp certificate is free and takes an hour, so take it if you like, but it proves you watched an overview. NPTEL's ₹1,000 exam certificate from IIT Kharagpur means more because it is proctored and shows your score.

Embedded hiring is unusually practical. Interviewers ask you to explain volatile, write a bit-manipulation macro, walk through what happens on an interrupt, or debug a stuck I2C bus. None of the certificates on this page tests that.

A board on your desk and a GitHub repository with register-level drivers, an interrupt-driven timer and a small RTOS project count for more than every free certificate here put together.

When you are ready for graded projects and a mentor, compare paid options on the best embedded systems course in India comparison, see every Skill-Lync embedded systems course on the embedded systems courses page, or start with Fundamentals of Embedded Systems.

FAQs

Is there a free embedded systems course with a free certificate?

Only one of the 13 we checked on 21 November 2026: Simplilearn SkillUp's 1-hour embedded systems course lists a free completion certificate. NPTEL's IIT Kharagpur courses are free to learn with a ₹1,000 exam for the certificate, edX's UT Austin and Arm courses charge US$199 and US$99, and Great Learning and Alison charge an unstated fee.

Does NPTEL have an embedded systems course?

Yes, two from IIT Kharagpur: Embedded Systems Design (12 weeks, Prof. Anupam Basu), last run January to April 2026, and Embedded System Design with ARM (8 weeks), last run January to March 2025. Lectures are free; the certificate needs a ₹1,000 proctored exam, with at least 10/25 in assignments and 30/75 in the exam.

Is the edX embedded systems course from UT Austin free?

You can audit it free, but edX says auditors get limited access and may not reach graded assignments. The verified track with a certificate costs US$199. It runs 8 weeks at 8-10 hours a week, and the labs use a Texas Instruments LaunchPad board.

Can I learn embedded systems without buying a board?

Yes, at the start. Wokwi's free Community plan simulates Arduino, ESP32, STM32 and Raspberry Pi Pico boards in the browser, and Skill-Lync's free ESP32 workshop runs entirely in a simulator. Buy a board once you reach timers and interrupts, because real hardware and a debugger teach you things a simulator hides.

Which microcontroller should a beginner start with?

Start with whatever lets you write code today: an Arduino Uno or an ESP32 in a simulator. Then move to an ARM Cortex-M board such as an STM32, which is closer to the microcontrollers used in industrial and automotive products, and learn to write its registers without libraries.

Can I get an embedded systems job with only free courses?

The free courses teach enough; what gets you hired is proof. Show a GitHub repository with register-level drivers, an interrupt-driven timer, a sensor on I2C or SPI and a small FreeRTOS project, and be ready to explain each line in an interview.

How we checked these courses

We are Skill-Lync, and our own free courses are in the table, so treat this as a well-sourced starting point rather than a neutral review. On 21 Nov 2026 we opened every course page listed and recorded whether the course is free to learn, its stated length, and its certificate terms in the provider's own words; we did not rely on listicles or ads. Where a page did not state a length we wrote "not stated". Skill-Lync's rows are generated from the same data as our free-course pages. Not in the table: Coursera's Arm and University of Colorado Boulder embedded courses (free access not confirmed on the pages we could read); Spoken Tutorial's Arduino series (its training page lists ₹299 plus GST per course for students); Altium's Basic Embedded Systems Design (offered to universities on request and built around Renesas hardware kits); Infosys Springboard (no embedded course found); and TI and ST's own training, which we did not check this time. If something has changed or we got it wrong, tell us through the form below and we will correct it.

All 16 roundups on one page: free engineering courses with certificate. Other free-course roundups: free ANSYS courses · free AutoCAD courses · free BMS courses · free CATIA courses · free CFD courses · free ETABS courses · free EV courses · free GD&T courses · free HyperMesh courses · free MATLAB courses · free PCB design courses · free Primavera P6 courses · free Revit courses · free SOLIDWORKS courses · free STAAD Pro courses. All of Skill-Lync's free lessons: Grow by Skill-Lync.

Finished a free course?

Ask a counsellor what to learn next in embedded systems.

Tell us your branch and the job you want. If a free course or another provider suits you better, we will say so.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.