Free · 3 lessons · no paymentFundamentals of Embedded Systems: 3 free lessons
Free lessons from Skill-Lync's Fundamentals of Embedded Systems course. The first three lessons define an embedded system and its hardware and software layers with automotive ECU examples, compare the ARM Cortex-A, R and M families and the Cortex-M4 blocks with CMSIS, and cover sensors, actuators and signal conditioning in automotive systems.
Last updated 16 Nov 2026 · 3 free lessons (3 h 28 min) · full course: 12 lessons (13 h 7 min), paid · ₹40,000
Free lesson 1 · 61 minEmbedded System Basics and Automotive ECU Case StudiesWhat will you learn in the free Fundamentals of Embedded Systems lessons?
- Embedded vs general-purpose computers; BSPs and I2C, SPI and UART peripherals
- Automotive ECUs and CAN communication, with a seat-controller example
- Cortex-A, Cortex-R and Cortex-M compared; Cortex-M4 NVIC, MPU and FPU
- Sensor properties, signal conditioning and actuator types
Free lessons you can watch now
Lesson 1 · 61 min · 3 partsEmbedded System Basics and Automotive ECU Case StudiesThe instructor defines an embedded system and splits it into hardware and software, covering board support packages, peripherals such as I2C, SPI and UART, and how it differs from a general purpose computer. The second half introduces automotive ECUs, with a car seat controller, CAN communication and an HVAC ECU as case studies.
Lesson 2 · 79 min · 4 partsARM Cortex Families, Cortex-M4 Components and the CMSIS Software PackageThe instructor explains that ARM is a processor architecture rather than a chip, then compares the Cortex-A, Cortex-R and Cortex-M series. The lesson walks through Cortex-M4 blocks including the interrupt controller, memory protection unit, floating point unit and CoreSight debug, and describes CMSIS core, driver and RTOS layers.
Lesson 3 · 68 min · 3 partsSensors, Actuators and Signal Conditioning in Automotive Embedded SystemsThe instructor shows a block diagram of an embedded device with sensors on the input side and output drivers feeding actuators. It covers sensor properties such as accuracy and response time, signal conditioning before the microcontroller, actuator types by energy source, and an automotive example using CAN or LIN, an ambient light sensor and a temperature sensor.
Which lessons of Fundamentals of Embedded Systems are free?
The first 3 lessons are free on Grow by Skill-Lync: 3 h 28 min of video from Skill-Lync's Fundamentals of Embedded Systems course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 9 lessons are listed in the outline below so you can see what each one covers.
How long is the Fundamentals of Embedded Systems course?
The full course has 12 lessons and 13 h 7 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 3 h 28 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid Fundamentals of Embedded Systems course on Skill-Lync, with mentor support and a certificate. For a career in Embedded & electronics, the PG Program in Embedded Systems for EV Applications goes further with industry projects and placement support.