Free BMS courses with certificate (2026): 10 checked, and the 2 that give a free certificate

Yes, there is a free battery management system (BMS) course with a free certificate: DIYguru's eMobility Academy BMS course (about 3.5 hours of video) and the same content on the ASDC portal both say they certify at no cost. As of 21 November 2026 we checked 10 free BMS options: 2 give a free certificate, 3 charge for one and 5 give none.

Checked 21 Nov 2026 · 10 free courses, each checked on its own page (linked) · Written by Skill-Lync, whose free courses are included

The short answer

  • You want a free BMS certificate: eMobility Academy's BMS Course: 15 videos, 3 h 34 min, a quiz and assignments, free to enrol and complete, with a certificate the page says carries ASDC and AICTE NEAT recognition. The same DIYguru course is listed on the ASDC portal, where you download the certificate after an 80% quiz.
  • You want the BMS from IIT faculty: NPTEL's Fundamentals of Electric Vehicles: Technology & Economics (IIT Madras, 8 weeks): free lectures on battery parameters, SoC and SoH estimation, pack design and three on BMS design. Its last certificate run was September to November 2020.
  • You want to see how a BMS is built in Simulink: MathWorks' 4-video playlist How to Develop Battery Management Systems in Simulink, then try it in MATLAB Online's free 20 hours a month.
  • You are a mechanical engineer heading into battery packs: Skill-Lync's free Li-ion Battery Pack Design Considerations course on YouTube: it opens with BMS types, then cell selection and pack design, about 4.3 hours. Watch the course →
2free certificate or badge
3free to learn, certificate paid
5no certificate (or ask)

Every free BMS course we checked

"Free" here means you can watch or read the whole course without paying (a few are free only for verified students, as the Format column says). Certificate terms are as published on 21 Nov 2026; providers change them, so read the provider's page before you start. Skill-Lync's own free courses are listed last and shaded.

Provider and courseLengthFormatCertificateSoftwareLevelBest for
eMobility Academy (DIYguru)BMS CourseFAQ: "The BMS Course is free to enrol and complete."15 videos, 3 h 34 min (the page's headline also says 8+ hours total)Recorded lessons, quiz and assignments, 3 optional DIY projects; free accountFree certificate Free certificate of completion with a verification link and QR code. The page says it carries ASDC and AICTE NEAT recognition (the provider's claim)None neededBeginnerA free BMS certificate from an EV training company
ASDC e-learning portalBattery and Battery Management Systems (BMS) CourseThe course content is DIYguru's, the same as the row above2 modules, 215 minutesVideo lessons, a quiz and a feedback form; free ASDC portal accountFree certificate Free: download it from your dashboard after scoring at least 80% in the quiz and sending the feedback formNone neededBeginnerA certificate issued through the Automotive Skills Development Council's own portal
Great Learning AcademyBasics of Battery Management System in EVs2.25 learning hoursSelf-paced video modules with quizzes; free accountPaid certificate Paid: the FAQ says the certificate comes after "payment of the certificate fee" (amount not shown). Another FAQ on the page does not mention a feeNoneBeginnerA 2-hour overview of what a BMS does in an EV
Great Learning AcademyBattery Technology in Electric Vehicles3.0 learning hoursSelf-paced video modules with quizzes; free accountPaid certificate Paid: "a non-refundable fee is applicable" for the certificate (amount not shown)NoneBeginnerCell chemistry and ageing, with BMS basics as one part
AlisonDesign of Electric Vehicle Batteries6-10 hours (average, as stated)Self-paced video course with assessmentsPaid certificate Paid: an optional CPD-accredited Alison certificate (price not shown on the course page)NoneAdvanced (Alison's label)Pack design, with the BMS's role as one learning outcome
NPTEL (IIT Madras)Fundamentals of Electric Vehicles: Technology & EconomicsTaught by Prof. Ashok Jhunjhunwala and colleagues8 weeks of lecturesFree recorded lectures on nptel.ac.inNo certificate None now: the last certificate run was September to November 2020 (exam 20 December 2020)NoneUndergraduateSoC and SoH estimation, pack development and BMS design in an Indian EV context
Owl WiS on YouTubeBattery Management System (BMS) Tutorial149,611 playlist views as of 21 Nov 20268 videosYouTube playlistNo certificate NoneNoneBeginnerShort explainers on BMS functions
MATLAB on YouTubeHow to Develop Battery Management Systems in Simulink4,007 playlist views as of 21 Nov 20264 videosYouTube playlistNo certificate NoneMATLAB, Simulink, StateflowIntermediateSeeing BMS algorithms modelled in Simulink and Stateflow
Skill-Lync on YouTubeLi-ion Battery Pack Design Considerations11,456 YouTube views as of 18 Nov 20264.3 hours of videoRecorded course, free on YouTube; plays on skill-lync.com after you leave your name and phone once, with a chapter guideAsk Not issued automatically. The page has a form to ask a counsellor about oneNoneBeginnerAn introduction to BMS and its types, then cell form factors, cell selection and pack design, with a case study
Skill-Lync on YouTubeBattery Thermal Management Systems Design7,217 YouTube views as of 19 Nov 202662 minutes of videoRecorded course, free on YouTube; plays on skill-lync.com after you leave your name and phone once, with a chapter guideAsk Not issued automatically. The page has a form to ask a counsellor about oneNoneBeginner to intermediateThe thermal side the BMS watches: C-rate, thermal runaway stages, temperature limits and air or liquid cooling

Can you practise BMS for free?

  • MATLAB Online (basic), free: free with a MathWorks account: 20 hours a month in the browser, MATLAB, Simulink and a set of common toolboxes, 5 GB of MATLAB Drive, and a 15-minute idle timeout. There is no free desktop version. MathWorks says time in the self-paced courses "does not count towards the 20-hour monthly limit".
  • PyBaMM (Python Battery Mathematical Modelling): free and open source (BSD-style licence), installed with pip install pybamm. It simulates cell voltage, temperature and degradation from physics models, which is what SoC estimators are tested against.
  • Battery University: free reading from Cadex Electronics on charging, ageing and diagnostics; no course and no certificate, but a good reference while you study.
  • SOC estimation simulator: our free in-browser simulator: coulomb counting, OCV resets and an extended Kalman filter on a 1-RC lithium cell with realistic sensor errors, so you can see why a BMS cannot just count current.

A free BMS learning path, in order

  1. What a BMS does (week 1). Do eMobility Academy's free BMS course or the ASDC version and get the certificate. You should be able to name the BMS's jobs: measure every cell, protect, estimate SoC, balance and talk over CAN.
  2. The cell it protects (week 2). Read one real cell datasheet, such as LG's INR18650MJ1: 3.635 V nominal, charged to 4.2 V, cut off at 2.5 V. Every BMS limit starts from numbers like these.
  3. SoC and SoH (weeks 3-4). Watch NPTEL IIT Madras's week 5 lectures on SoC and SoH estimation, then try our SOC estimation simulator and code coulomb counting yourself in Python or MATLAB Online to see how a small current-sensor offset drifts over a day.
  4. Balancing and the pack (week 5). Watch Skill-Lync's free Li-ion pack design course, then work out how long passive balancing through a 33 ohm resistor takes to bleed 100 mAh from a cell at 4.0 V (4.0 / 33 = 121 mA, so about 50 minutes).
  5. A small BMS model (week 6). Build a Simulink or Python model with 4 cells in series, an over-voltage cut-off and passive balancing, following MathWorks' BMS playlist. Put it on GitHub with plots.

Is a free BMS certificate worth it?

The eMobility Academy and ASDC certificates are worth getting because they cost nothing and take about 3.5 hours. Read them for what they are: a completion certificate after a short beginner course, not proof that you can design a BMS.

India's EV battery rules make BMS knowledge concrete. AIS-156 Amendment 3 for two- and three-wheelers requires a microcontroller-based BMS and tests for over-charge, over-discharge, over-temperature, over-current and short-circuit protection. If you can explain how a BMS meets each test, you know more than a certificate shows.

BMS interviews usually ask how you would estimate SoC, why cells drift apart, and what happens when one cell hits its voltage limit. A small model you built and can explain counts for more than any free certificate.

When you are ready for graded projects and a mentor, compare paid options on the best BMS course in India comparison, see every Skill-Lync BMS course on the BMS courses page, or start with Li-ion Battery System design in EV & ES.

FAQs

Is there a free BMS course with a free certificate?

Yes. As of 21 November 2026, eMobility Academy's BMS Course (DIYguru, 15 videos, 3 h 34 min) is free to enrol and complete and gives a certificate of completion. The same course on the ASDC portal gives a free certificate after you score at least 80% in its quiz and send a feedback form.

Is the ASDC BMS certificate government recognised?

The certificate is issued through the e-learning portal of ASDC, the Automotive Skills Development Council, so it carries ASDC's name. The course content itself is from DIYguru. eMobility Academy says its own certificate carries ASDC and AICTE NEAT recognition; that is the provider's claim, which we could not check independently.

Is the Coursera battery management systems course free?

No. The University of Colorado Boulder's Algorithms for Battery Management Systems specialization on Coursera says in its FAQ: "No, you cannot take this course for free." It is the deepest course on SoC and SoH estimation algorithms, so it is worth paying for once the free basics are done.

Does NPTEL have a BMS course?

Not a BMS-only course. IIT Madras's Fundamentals of Electric Vehicles: Technology & Economics on NPTEL has free lectures on SoC and SoH estimation, battery pack development and three lectures on BMS design. Its last certificate run was September to November 2020, so you can watch it free but not get a certificate now.

What does a BMS do in an electric vehicle?

A BMS keeps every cell inside its safe window, for example 2.5 V to 4.2 V for an LG MJ1 cell. It measures each cell's voltage and temperature and the pack current, cuts off on over-charge, over-discharge, over-temperature or short circuit, estimates state of charge, balances the cells and reports to the vehicle over CAN.

Which software do I need to learn BMS?

MATLAB and Simulink are the most common in industry, and MATLAB Online's free tier gives 20 hours a month. Python with the free, open-source PyBaMM library is enough to simulate cells and test SoC estimators. For the free courses in this list you need no software at all.

How we checked these courses

We are Skill-Lync, and our own free courses are in the table, so treat this as a well-sourced starting point rather than a neutral review. On 21 Nov 2026 we opened every course page listed and recorded whether the course is free to learn, its stated length, and its certificate terms in the provider's own words; we did not rely on listicles or ads. Where a page did not state a length we wrote "not stated". Skill-Lync's rows are generated from the same data as our free-course pages. Not in the table: Coursera's Algorithms for Battery Management Systems (the FAQ says it cannot be taken for free); ARAI Academy's BMS and BTMS e-learning (₹1,000 plus 18% GST for students, certificate on passing); MathWorks' Simscape Battery Onramp and BMS modelling courses, whose access terms we could not read; TU Delft's BMS and Pack Design course on edX, whose official pages did not load; and Infosys Springboard, which had no battery course. If something has changed or we got it wrong, tell us through the form below and we will correct it.

All 16 roundups on one page: free engineering courses with certificate. Other free-course roundups: free ANSYS courses · free AutoCAD courses · free CATIA courses · free CFD courses · free embedded systems courses · free ETABS courses · free EV courses · free GD&T courses · free HyperMesh courses · free MATLAB courses · free PCB design courses · free Primavera P6 courses · free Revit courses · free SOLIDWORKS courses · free STAAD Pro courses. All of Skill-Lync's free lessons: Grow by Skill-Lync.

Finished a free course?

Ask a counsellor what to learn next in BMS.

Tell us your branch and the job you want. If a free course or another provider suits you better, we will say so.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.