Recorded workshop · CIVIL

Structural Lateral Stability

Held 24 Mar 20212 videos

Notes written by Skill-Lync from the recording · Updated 17 Nov 2026

What this workshop covers

Structural lateral stability explained: braced frames, shear walls and moment frames, wind load paths, notional forces and IS 800 sway and P-delta checks.

In part 1 the instructor separates the gravity system from the lateral stability system and lists what the lateral system must resist: wind and seismic loads, plus horizontal forces from irregular geometry, eccentric loading, member imperfections and erection tolerances. He covers how to choose a system early in design, the wind load path from cladding through the floor diaphragm to the foundation, torsion from eccentric shear walls, and a comparison of steel bracing, RC shear walls and cores, and moment-resisting frames. Part 1 ends with the IS 800:2007 robustness rules and notional horizontal forces.

Part 2 covers first- and second-order elastic analysis, P-big-delta and P-small-delta effects, how to classify a frame as sway or non-sway, the elastic critical load factor and how to calculate it from storey drifts, and options for modelling shear walls and cores. This Skill-Lync session from March 2021 suits structural engineers and final-year students who know basic steel design. It is slide-based, with no worked numerical example or software demonstration, and it follows IS 800 (Indian steel code) only.

Chapters

Part 1

  1. 0:07 Gravity and lateral stability systems
  2. 1:00 Sources of horizontal force beyond wind and seismic
  3. 3:05 Choosing a lateral system: loads, geometry, diaphragm
  4. 6:05 Global failure modes; braced vs unbraced frames
  5. 8:10 Wind load path from cladding to foundation
  6. 9:40 Shear walls and torsion from eccentric stiffness
  7. 11:29 Steel bracing types and simple construction
  8. 14:21 Bracing, shear walls and moment frames compared
  9. 16:52 IS 800 robustness rules and notional horizontal forces

Part 2

  1. 0:08 Elastic vs plastic, first- vs second-order analysis
  2. 2:31 What P-big-delta and P-small-delta effects are
  3. 4:37 Elastic critical load factor and sway sensitivity
  4. 5:48 Non-sway check: drift limits h/2000 and h/4000
  5. 8:29 Designing sway-sensitive frames step by step
  6. 9:15 Second-order effects in plastic analysis
  7. 10:54 Calculating lambda crit from storey drifts
  8. 12:33 Modelling shear walls and cores: shells vs sticks

Key points from the session

  • Every structure needs a lateral stability system in both plan directions, and it should be fixed at concept stage. Besides wind and earthquake it must resist horizontal forces from plan or elevation irregularity, unbalanced and eccentric loads, member imperfections and out-of-plumb erection tolerances.
  • Trace the load path: wind pressure on the cladding goes to beams and columns by tributary width, then through the floor diaphragm (rigid, semi-rigid or flexible) to the braced bays or walls, and down to the foundation. A composite metal deck only acts as a rigid diaphragm if it is properly fixed to the frame, for example with shear studs.
  • Steel bracing gives the least drift but blocks openings; RC shear walls and cores are stiff and can take planned openings; moment-resisting frames leave bays fully open but drift the most and are prone to second-order effects. Keep the stiffness centre of walls close to the line of the load to limit torsion.
  • Notional horizontal forces of 0.5% of the factored dead plus imposed load on each floor must be applied even when there is no wind or seismic load. Combine them with gravity combinations only, and apply them in one direction at a time.
  • Under IS 800, a frame is non-sway if the storey drift under notional forces is at most h/2000 for a clad building where cladding stiffness is ignored, or h/4000 for an unclad building or one where cladding stiffness is included. Otherwise treat it as sway-sensitive and include P-delta effects.
  • The elastic critical load factor, lambda crit, is how much the factored loads would have to increase to cause elastic instability. The instructor calculates it as 1/(200 x the largest storey sway index), where the sway index is (upper minus lower storey deflection) divided by storey height under notional forces. Lower values mean the frame is more sensitive to second-order effects.
  • For shear walls and cores, the instructor usually models each wall as a 1D stick joined by beams at floor levels rather than as full shell elements. He finds this gives satisfactory global results with a much lighter model.

What is the difference between a braced and an unbraced (sway) frame?

A braced frame resists horizontal load through diagonal bracing or shear walls, so storey drift is small and connections can be simple pins. An unbraced or sway frame relies on rigid beam-column connections and the bending of its members. It leaves bays open, but it drifts more and second-order effects become significant.

What are notional horizontal forces and why are they applied?

They are small horizontal forces, taken in IS 800 as 0.5% of the factored dead plus imposed load on each floor, that represent real imperfections such as out-of-plumb columns and erection tolerances. Every structure is designed for them, even with no wind or seismic load, combined with gravity loads only, one direction at a time.

How do I know whether second-order (P-delta) effects can be ignored?

Apply the notional horizontal forces and check each storey's drift. If drift stays within h/2000 for a clad frame with cladding stiffness ignored, or h/4000 for an unclad frame or one that includes cladding stiffness, the frame is non-sway and first-order analysis is enough. Otherwise use moment amplification or a full second-order analysis.

Where to go next

Who should watch

For Civil Engineers

A 24 Mar 2021 workshop recording from Skill-Lync on CIVIL. For a structured course with projects on this topic, see Skill-Lync's civil engineering courses.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.