Machine Drawing cover
Interactive book · Semester 3

Machine Drawing

Explode an assembly, hatch a section the right way, draw a nut with true chamfer curves, build a weld symbol and watch a hole earn bonus tolerance

28 chapters, 28 interactives, few words. Every chapter is mapped to the Anna University, VTU, SPPU, Mumbai University and KTU units it covers: drawing types and conventions, sectioning assemblies, dimensioning, screw threads, nuts, bolts, screws and locking devices, foundation bolts, keys, cotter and knuckle joints, riveted and welded joints, rigid and flexible couplings, bearings, valves, engine and machine-tool assemblies, limits, fits, surface texture, GD&T and CAD modelling. Projection, sections of solids and isometric views are in the Engineering Graphics book; the strength design of the same joints is in the Design of Machine Elements book.

  • AUME3381Computer Aided Machine Drawing
  • VTUBMEL305Introduction to Modelling and Design for Manufacturing
  • SPPU202042Solid Modelling and Drafting
  • MU2403116Working Drawing - GD&T
  • KTUPCMEL307Computer Aided Machine Drawing and Modelling

By Skill-Lync · Updated 20 Nov 2026 · 28 chapters · 28 interactives · free, no sign-up

Chapter 1

Machine drawings: part, assembly, detail and production drawings, the title block and the parts list

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 4SPPU 202042 practicalsMU 2403116 Module IKTU PCMEL307 Part A

What is a machine drawing, and what turns it into a production drawing?

A machine drawing shows machine parts and assemblies in orthographic views, drawn to Indian practice in first-angle projection (SP 46 requires it for drawings made after 31 December 1991), with dimensions, materials and notes. A production (working) drawing carries everything a shop needs to make and inspect the part without asking anyone: limits and fits, geometric tolerances, surface texture, heat treatment, the process notes and the quantity. A sketch tells a fitter what you mean; a production drawing is the contract with the supplier.

How is a part (detail) drawing different from an assembly drawing?

A detail drawing shows one part alone with every dimension, the tolerances, the material and the scale: in the interactive the shaft is drawn at 1:2 with its keyseat depth given as d − t1 = 26 mm in a removed section, and the hub keyway as d + t2 = 33.3 mm. An assembly drawing shows the parts in their working positions. Its kinds: the design (layout) assembly, the working assembly for a simple product, sub-assemblies, the exploded view (SP 46 defines it as a pictorial with the parts pulled apart along common axes) and the installation drawing with only overall sizes and fixing points.

Assembly, exploded view and part drawing of one assembly: balloons, the parts list and the title block: interactive loads as you scroll

What must the title block and the parts list contain?

SP 46 puts the title block inside the frame at the bottom right and asks for at least the name, date, projection symbol, scale, title and drawing number. The parts list (item list) has columns for item number, description, quantity, reference (a standard or drawing number) and material. On the drawing it sits just above the title block and is read from the bottom up, with the headings underneath, so rows can be added later. The scale is written as a ratio, such as SCALE 1:2.

Why does an assembly drawing get balloons instead of dimensions?

An assembly drawing shows how the parts fit together; their sizes live on the detail drawings. Each part gets an item reference: a number in a circle, all circles one size, joined to the part by a narrow leader that ends in a dot on the part and never crosses another leader. Identical parts share one number and the quantity column counts them, so a coupling with 2 flanges, 2 keys, 4 bolts, 4 nuts and 4 washers needs 5 balloons for 16 pieces. Only overall sizes, centre heights and fits such as Ø30 H7/k6 appear.

Predict, then check

An assembly uses four identical bolts, each with its own nut. How many item references (balloons) do the bolts and nuts need?

Worked examples

Item references and the parts list of a coupling · A flange coupling assembly (illustrative): 2 flanges, 2 keys, 4 bolts M12, 4 nuts M12, 4 washers
  1. Number the distinct parts in a sensible order (big parts first): 1 Flange, 2 Key, 3 Bolt M12, 4 Nut M12, 5 Washer
  2. Item references = distinct parts = 5; each is drawn once with a balloon, identical pieces are not numbered again
  3. Pieces = 2 + 2 + 4 + 4 + 4 = 16, entered in the quantity column
  4. On the drawing the list sits above the title block, item 1 at the bottom, headings underneath

Answer: 5 balloons and 5 rows, 16 pieces in all

Choosing a standard scale · A shaft 360 mm long must fit a drawing space 180 mm wide with 15 mm clear at each end; SP 46 scales 2:1, 1:1, 1:2, 1:5, 1:10
  1. Room for the view = 180 − 2 × 15 = 150 mm
  2. At 1:1 the shaft is 360 mm: too long; at 1:2 it is 180 mm: still more than 150 mm
  3. At 1:5 it is 72 mm, which fits; intermediate scales such as 1:3 are used only in exceptional cases
  4. Write SCALE 1:5 in the title block; dimensions still give the true sizes

Answer: SCALE 1:5 (the view is 72 mm long)

Reading sizes on a scaled print · On a 1:2 print a length measures 37.5 mm; a 40 mm key is drawn on a detail at 2:1
  1. True length = measured ÷ scale = 37.5 ÷ 0.5 = 75 mm
  2. The written dimension governs: never scale a drawing to make a part; if the measured and written values disagree, ask
  3. At 2:1 the 40 mm key is drawn 80 mm long, so small features can be dimensioned clearly
  4. In the interactive the figure maps 1 mm of sheet to 2.8 px, so the 2:1 key is 224 px long

Answer: 75 mm; the key appears 80 mm long on the sheet

Chapter 2

Conventional representation of materials and machine features: springs, gears, bearings, knurling, splines and flats

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU 2403116 Module IKTU PCMEL307 Part A

Why are springs, gears and knurls drawn by convention instead of as they look?

Drawing every coil, tooth and groove takes hours and adds nothing the shop needs: the tooth form comes from the module and the standard cutter, the knurl from its type and pitch. In the interactive a pinion of 18 teeth meshing with a 40-tooth wheel takes 234 lines drawn truly and 4 by convention. A Ø24 knurl at P 0.8 has 94 teeth round it, but the drawing shows a few lines and a note. The convention is a code every reader knows, so it is also less ambiguous.

Conventional representation: a real spring, gear, bearing, knurl or spline beside the way a drawing shows it: interactive loads as you scroll

How are springs and gears represented?

SP 46 draws a coiled spring, in the simplified form, as a single line following the axis of the wire; right hand is assumed and LH is written when needed. A gear is drawn as a solid bounded by its tip circle, with the pitch circle as a long-dashed dotted narrow line; the root circle is left out of views. For m = 4 and z = 18: pitch Ø = mz = 72 mm, tip Ø = 80 mm, root Ø = 62 mm. Two meshing gears show tangent pitch circles 116 mm apart.

How are rolling bearings and knurling shown?

ISO 8826-1 draws a rolling bearing, where its type need not be shown, as a square (or its true outline) with a free-standing upright cross that does not touch it, in outline lines and without hatching, on one or both sides of the axis. Knurling is drawn with a few lines over part of the surface and a note of type and pitch: IS 3403 lists straight (RAA) and cross (RKV) knurls and pitches from 0.5 to 1.6 mm. The blank is turned smaller than the knurl: 23.6 mm for a Ø24 RAA knurl at P 0.8.

How are splines, flats, repeated holes and materials shown?

A splined shaft is drawn like a gear: tip outline thick, root narrow, the end of the usable length marked. A square or flat on a shaft gets its two diagonals in narrow lines, which saves an end view. Repeated holes are drawn once, the others marked by centre lines, and a note gives the number: 6 × Ø12 EQUI SP on PCD 100, 60° apart. SP 46 hatches sections with plain narrow lines; a pattern may show a material only if a key on the drawing defines it, so the material is normally named in the parts list.

Predict, then check

On the end view of a spur gear, which circle is drawn as a long-dashed dotted (chain) line?

Worked examples

Circles of a gear pair · Spur gears of module 3 mm with 25 and 50 teeth (illustrative)
  1. Pinion: d = mz = 3 × 25 = 75 mm; da = m(z + 2) = 81 mm; df = m(z − 2.5) = 67.5 mm
  2. Wheel: d = 150 mm, da = 156 mm, df = 142.5 mm
  3. Centre distance = (d1 + d2)/2 = (75 + 150)/2 = 112.5 mm: the pitch circles touch
  4. Tooth depth = (da − df)/2 = 6.75 mm = 2.25m
  5. Draw: tip circles thick, pitch circles chain lines tangent at the pitch point, no root circles

Answer: Pitch Ø 75 and 150 mm, tip Ø 81 and 156 mm, centres 112.5 mm apart

A compression spring, simplified · Wire Ø4 mm, mean coil Ø30 mm, 8 active coils at pitch 10 mm, one closed coil at each end
  1. Total coils = 8 + 2 = 10
  2. Length along the wire centres = 4 + 8 × 10 + 4 = 88 mm; with the wire at each end the spring is 92 mm long
  3. Simplified view: one line along the wire axis, a zigzag of 2 × 10 = 20 straight strokes between the outer diameter lines
  4. Right hand needs no note; a left-hand spring is marked LH

Answer: 10 coils, about 92 mm long, drawn as a 20-stroke zigzag

Knurl note and blank size · A Ø30 handle to be knurled straight (RAA) or cross (RKV, points indented) at pitch 1.0 mm (IS 3403)
  1. Teeth round the handle = π × 30 / 1.0 = 94.25, so about 94 grooves: far too many to draw
  2. Blank Ø for RAA = d1 − 0.5P = 30 − 0.5 = 29.5 mm
  3. Blank Ø for RKV = d1 − 0.33P = 30 − 0.33 = 29.67 mm
  4. Drawing: a few lines over part of the knurled length, Ø30 as the finished size, and a note of type and pitch

Answer: Turn the blank to Ø29.5 (RAA) or Ø29.67 (RKV); note the knurl type and P 1.0

Chapter 3

Sectioning an assembly: adjacent parts, parts that are never cut, thin sections and revolved sections

Which syllabus covers thisAU ME3381 Part IIVTU BMEL305 Module 4SPPU 202042 practicalsMU not in syllabusKTU PCMEL307 Part A

How are adjacent parts hatched in a sectioned assembly?

Every cut part is hatched with continuous narrow lines, preferably at 45°. All areas of one part carry the same hatching, in every view, so the eye joins them. Two parts that touch must differ in direction (45° against 135°) or in spacing. In the interactive the cast-iron housing and the bronze bush pressed into it are hatched in opposite directions, and the end cover keeps 45° but with wider spacing. Spacing suits the area, never closer than 0.7 mm on paper.

Sectioning an assembly: hatching adjacent parts, parts never cut lengthwise, thin and revolved sections: interactive loads as you scroll

Which parts are never sectioned lengthwise, and why?

SP 46 lists ribs, fasteners, shafts and spokes of wheels and the like; the same rule covers keys, pins, cotters, rivets, nuts, washers and the balls of bearings. They are solid, so cutting them shows nothing new, and hatching would hide their shape and make the drawing harder to read. They are drawn in outside view even when the cutting plane passes through them. In the interactive 5 of the 10 parts stay unhatched. A cross-section across a shaft, as in a removed section of a keyseat, is hatched.

How is a thin section such as a gasket drawn?

A section too thin to hatch, such as a gasket, a sheet-metal part or a rolled steel section at a small scale, is filled solid. Where two thin sections touch, a gap of at least 0.7 mm is left between them so they read as two parts. A 3 mm gasket drawn at 1:2 is 1.5 mm thick on paper: hatch lines at least 0.7 mm apart would leave room for only 2, so it is filled black instead.

What are revolved and removed sections?

They show the cross-section of an arm, spoke, rib or shaft without another full view. A revolved section is turned through 90° and drawn on the view itself in continuous narrow lines, with no label. A removed section is drawn away from the view in thick lines, either on a chain line through the cutting position or anywhere with a label such as A-A. In the interactive the spoke is not hatched lengthwise, so its elliptical 19 × 14 mm cross-section is shown by a revolved section.

Predict, then check

A full section is taken along the axis of a pulley keyed to a shaft and held by a nut. Which of these is hatched?

Worked examples

Sort the parts of an assembly section · The interactive's assembly: housing, bush, shaft, spoked pulley, key, washer, nut M20, end cover, gasket, two screws M8
  1. Cut and hatched: housing, bush, pulley hub and rim, end cover = 4 parts
  2. Outside view (not cut lengthwise): shaft, key, washer, nut, screws = 5 parts; the pulley spokes are not hatched either
  3. Filled solid: the gasket = 1 part
  4. Touching hatched pairs: housing and bush get opposite directions; the cover is set apart by the gasket and gets wider spacing
  5. Check: 4 + 5 + 1 = 10 parts, one item each in the parts list

Answer: 4 hatched, 5 in outside view, 1 solid

Hatch or fill a gasket? · A gasket 3 mm thick drawn at 1:2, and a 2 mm gasket drawn at 1:5; minimum spacing of parallel lines 0.7 mm (SP 46)
  1. At 1:2 the 3 mm gasket is 3 × 0.5 = 1.5 mm on paper
  2. Hatch lines need at least 0.7 mm between them: 1.5 / 0.7 allows 2 lines, which does not read as a section
  3. At 1:5 the 2 mm gasket is 0.4 mm: too thin even to outline clearly
  4. Both are thin sections: fill them solid; leave a 0.7 mm gap if two such sections touch

Answer: Fill both solid (thin-section convention)

The revolved section of a spoke · A spoke seen in the axial section tapers from 16 mm wide (axially) at the hub (radius 22) to 12 mm at the rim (radius 60); its section is elliptical, 19 mm in the plane of rotation, at radius 41
  1. Spoke width at radius 41 = 16 − 4 × (41 − 22)/38 = 14 mm: this is the axial size of the section, so the ellipse is 19 × 14 mm
  2. Turn the section through 90° about the spoke's centre line and draw it on the spoke in continuous narrow lines
  3. Hatch it like the pulley (same part, same hatching); the spoke itself stays unhatched
  4. Area of the section = π/4 × 19 × 14 = 208.9 mm²

Answer: An ellipse 19 × 14 mm drawn in narrow lines on the spoke, area 208.9 mm²

Chapter 4

Dimensioning machine parts: chain, parallel, coordinate and functional dimensioning

Which syllabus covers thisAU ME3381 Part IIVTU BMEL305 Module 1SPPU 202042 practicalsMU 2403116 Module IIIKTU PCMEL307 Part A

What are functional, non-functional and auxiliary dimensions?

A functional dimension (F) is essential to how the part works: a bearing seat, the pitch of two holes that take a mating part. A non-functional dimension (NF) is needed only to make the part, and is placed where it suits production and inspection. An auxiliary dimension is for information only: it follows from other dimensions, carries no tolerance and is written in brackets, such as (200). SP 46 also asks that each feature be dimensioned once, in the view that shows it best, with no more dimensions than needed.

What are chain, parallel, running and coordinate dimensioning?

Chain dimensioning runs each dimension from the previous feature; SP 46 allows it only where the build-up of tolerances does not harm the function. Parallel dimensioning measures every feature from one common datum, with the dimension lines stacked. Superimposed running dimensions are the compact form of parallel: one line from an origin mark, values at each arrowhead. Coordinates go in a table of X and Y for each hole. A drawing may combine them: the functional distance direct, the rest from the datum.

Chain, parallel, coordinate and combined dimensioning of one part, and the tolerance each gives a distance: interactive loads as you scroll

How much can a distance vary under each system?

In the worst case every dimension on the path between two features is at its limit in the same direction, so the variation is the number of dimensions on that path times the tolerance of each. In the interactive plate, with ± 0.1 on every dimension, hole H1 to H4 varies ± 0.3 when chained (three links) but ± 0.2 from a datum (two values). The functional pitch H2 to H3 given directly varies only ± 0.1. Put the dimension you care about on the drawing directly.

What are the main rules for placing dimensions?

Dimensions in millimetres, without the unit. Place them outside the view where possible, not on hidden lines, with dimension lines that do not cross each other or the extension lines. Extension lines start just clear of the outline and run a little past the dimension line. Write values either aligned with the dimension line (Method 1) or all reading from the bottom of the sheet (Method 2), only one method per drawing. Put Ø, R or a square sign before the value, and give a diameter in the view where it shows as a length.

Predict, then check

Four holes A, B, C, D in a line are chain dimensioned A–B, B–C, C–D, each ± 0.1 mm. What is the worst-case variation of the distance A to D?

Worked examples

Chain against parallel on a plate · Holes H1 to H4 at 20, 65, 110 and 170 mm from edge A of a 200 mm plate; every dimension ± 0.1 mm
  1. Chain: 20, 45, 45, 60, 30. H1 to H4 uses 45, 45 and 60: three links, ± 3 × 0.1 = ± 0.3 mm
  2. Parallel from A: 20 and 170 bound H1 to H4: two values, ± 2 × 0.1 = ± 0.2 mm
  3. Limits of H1 to H4 = 150 mm: chain 149.7 to 150.3 mm; parallel 149.8 to 150.2 mm
  4. Checked by trying all 32 combinations of + and − on the five dimensions

Answer: ± 0.3 mm chained, ± 0.2 mm from the datum

Combined dimensioning of a stepped shaft · Shoulders S1 to S4 at 30, 70, 120 and 150 mm from end A of a 180 mm shaft; the 50 mm length of the Ø50 step (S2 to S3) is functional; ± 0.1 on each dimension
  1. Dimension S2 to S3 directly (50), and S1, S2, S4 and the end from A (30, 70, 150, 180)
  2. S2 to S3: one dimension, ± 0.1 mm
  3. S1 to S4 = 120 mm: from A by 30 and 150, ± 0.2 mm (± 0.3 mm if chained)
  4. S4 to the end: 150 and 180 from A, ± 0.2 mm

Answer: Functional 50 held to ± 0.1 mm; the others ± 0.2 mm

Why the overall length becomes auxiliary · The plate chain dimensioned 20, 45, 45, 60, 30, each ± 0.1 mm, and the overall length 200
  1. The chain fixes the overall length already: 20 + 45 + 45 + 60 + 30 = 200 mm
  2. If every link is at a limit, the length runs from 199.5 to 200.5 mm
  3. Writing 200 ± 0.1 as well would contradict the chain (a part with all links low, 199.5 mm, passes the chain but fails 200 ± 0.1)
  4. So the overall length is given as an auxiliary dimension, (200), with no tolerance, or one chain link is left out

Answer: (200), auxiliary, in brackets and untoleranced

Chapter 5

Screw threads: terminology and the ISO metric, BSW, square, ACME, buttress and knuckle forms

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 2SPPU not in syllabusMU 2403116 Module IKTU PCMEL307 Part B

What are the major, minor and pitch diameters, the pitch and the lead?

The major diameter d is the crest of a bolt's thread, the minor diameter is its root, and the pitch diameter d2 sits between them where the tooth and the gap are equally wide, P/2 each. Pitch P is the distance from one crest to the next along the axis; lead L is how far the nut moves in one turn. For an M20 coarse thread, P = 2.5 mm, d2 = 18.376 mm and the bolt's minor diameter d3 = 16.933 mm. A single-start thread has L = P.

How do the ISO metric and the Whitworth (BSW) threads differ?

Both are V threads for fastening. ISO metric has a 60° angle, flat crests P/8 wide, flat roots P/4 wide and a basic depth of 0.541P: at P = 6 that is 3.25 mm. BSW, the old British inch thread, has a 55° angle, rounded crests and roots of radius 0.1373P and a depth of 0.6403P. BSW pitch is given in threads per inch: a 1/2 inch bolt has 12, a pitch of 2.117 mm. Pick a form and drag the pitch to compare the profiles.

Thread forms drawn to their profiles: ISO metric, BSW, square, ACME, trapezoidal, buttress and knuckle, and multi-start lead: interactive loads as you scroll

Which thread forms carry power, and why are they shaped differently?

Screw jacks, presses and lead screws need flanks that push almost along the axis. A square thread does that best: depth and tooth width are both P/2, so there is no radial push on the nut. It is hard to cut, though, and nut wear cannot be taken up. ACME (29°) and ISO trapezoidal (30°) threads give up a little efficiency for strength, easy cutting and split nuts: Tr 40 × 7 has d2 = 36.5 and d3 = 32 mm. A buttress thread (7° load flank, 45° back) carries heavy load one way, as in a vice.

Where are knuckle threads and multi-start threads used?

A knuckle (round) thread has a 30° angle and crest and root radii of 0.2385P, just under P/4, with a depth of 0.5P. It shrugs off dirt and dents, so it suits respirator connections and towing eyes: Rd 28 × 1/8" has P = 3.175 mm and a minor diameter of 24.825 mm. A multi-start thread winds n helices side by side, so the lead is nP. On Tr 40 × 7, two starts double the helix angle from 3.49° to 6.96°. The nut moves faster but is less likely to stay put.

Predict, then check

A three-start screw has a pitch of 4 mm. How far does its nut travel in one turn?

Worked examples

Basic dimensions of an M24 coarse thread · M24, coarse pitch P = 3 mm (ISO 261), ISO 68-1 relations
  1. Fundamental triangle H = 0.866 × 3 = 2.598 mm
  2. Pitch diameter d2 = 24 − 0.6495 × 3 = 22.051 mm
  3. Basic minor diameter d1 = 24 − 1.0825 × 3 = 20.752 mm (the nut's crest)
  4. Bolt minor diameter d3 = 24 − 1.2269 × 3 = 20.319 mm (rounded root)
  5. Basic depth = (24 − 20.752)/2 = 1.624 mm = 0.541P

Answer: d2 = 22.05 mm, d1 = 20.75 mm, d3 = 20.32 mm

Proportions of a Tr 40 × 7 lead screw · ISO trapezoidal, d = 40 mm, P = 7 mm, crest clearance ac = 0.5 mm (P 6 to 24)
  1. Engaged depth H1 = 0.5 × 7 = 3.5 mm; screw depth h3 = H1 + ac = 4 mm
  2. Pitch diameter d2 = 40 − 0.5 × 7 = 36.5 mm; screw minor d3 = 40 − 2 × 4 = 32 mm
  3. Nut: minor D1 = 40 − 7 = 33 mm, major D4 = 40 + 2 × 0.5 = 41 mm
  4. Crest flat = (0.5 − 0.5 tan 15°) × 7 = 2.562 mm
  5. Helix angle at d2 = atan(7/(π × 36.5)) = 3.49°

Answer: d2 = 36.5, d3 = 32, D1 = 33, D4 = 41 mm; helix 3.49°

A two-start square thread for a press · Square thread, d = 50 mm, P = 8 mm, two starts; the platen must move 400 mm (illustrative)
  1. Lead L = 2 × 8 = 16 mm per turn
  2. Depth = P/2 = 4 mm: pitch diameter = 50 − 4 = 46 mm, minor = 50 − 8 = 42 mm
  3. Helix angle = atan(16/(π × 46)) = 6.32°
  4. Turns for 400 mm = 400/16 = 25, half the 50 a single start needs

Answer: Lead 16 mm, helix 6.32°, 25 turns

Chapter 6

Drawing threads: conventional representation, tapped holes and thread designation

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 2SPPU not in syllabusMU 2403116 Module IKTU PCMEL307 Part B

How is a thread drawn without drawing every turn?

SP 46 (IS 10715-1, after ISO 6410) draws the crests as continuous wide lines and the roots as continuous narrow lines, with a wide line where the full thread ends. On an M20 bolt the two lines are 1.53 mm apart; the gap may be drawn wider but never less than twice the wide line or 0.7 mm. In the end view the root is a narrow circle about three-quarters complete, open in the upper right, and the chamfer circle is left out. Switch views to see each rule.

Drawing threads the conventional way: external, internal, blind tapped holes, a stud in its hole and the designation: interactive loads as you scroll

How is a tapped hole drawn in section?

Inside a hole the crest is the minor diameter, so that line is wide and the major diameter is the narrow one. Hatching runs up to the crest lines. A blind hole shows the drill going deeper than the thread, ending in the 118° drill point. If the drawing gives no drill depth, SP 46 draws it 1.25 times the thread length: an M20 hole tapped 30 mm deep is drilled 37.5 mm. The drill is roughly d − P, here 17.5 mm.

What changes when a stud is screwed into a tapped hole?

The external thread always covers the internal one. Over the engaged length you draw only the stud's lines, and the block's hatching runs up to the stud's crest line, the major diameter. Below the stud end the tapped-hole convention returns. The stud itself is not hatched, because fasteners are not cut in longitudinal sections. In the interactive an M20 stud goes 30 mm into cast iron (1.5d, a common proportion), the hole is tapped 40 mm and drilled 50 mm.

How do you read a thread designation such as M20 × 1.5 − 6g − LH?

M means ISO metric and 20 is the major diameter. × 1.5 is a fine pitch; a coarse pitch (2.5 for M20) is not written. 6g is the tolerance class: grade 6, position g, lower case for an external thread (its nut would be 6H). LH means left hand; right hand is the default and not written. A multi-start thread gives lead and pitch: M20 × L5 − P2.5 has two starts and advances 5 mm per turn.

Predict, then check

A blind hole is marked M16, thread depth 24 mm, with no drill depth given. How deep do you draw the drilled hole (to the start of the point)?

Worked examples

An M16 bolt end drawn conventionally · M16 coarse, P = 2 mm, thread length 40 mm, 45° end chamfer
  1. Crest lines (wide) at Ø16; root lines (narrow) at d3 = 16 − 1.2269 × 2 = 13.546 mm
  2. True gap between them = (16 − 13.546)/2 = 1.227 mm, more than the 0.7 mm minimum
  3. Chamfer from Ø13.55 at the end to Ø16, 1.23 mm long at 45°
  4. A wide limit line across Ø16 at 40 mm from the end
  5. End view: Ø16 wide circle, Ø13.55 narrow 3/4 circle open in the upper right; no chamfer circle

Answer: Crest Ø16 wide, root Ø13.55 narrow, limit line at 40 mm

A blind tapped hole for an M12 screw · M12 coarse (P = 1.75), full thread 18 mm deep, drill depth not specified
  1. Tapping drill ≈ d − P = 12 − 1.75 = 10.25 mm; SP 46's own example uses Ø10.2
  2. Minor diameter D1 = 12 − 1.0825 × 1.75 = 10.106 mm: the wide crest lines
  3. Drill depth = 1.25 × 18 = 22.5 mm
  4. 118° point: cone length = (10.25/2)/tan 59° = 3.08 mm, so the tip is 25.58 mm deep
  5. Limit line at 18 mm drawn wide out to the major Ø12; hatching up to the crest lines

Answer: Drill Ø10.25 × 22.5 deep (tip 25.6), thread M12 × 18 deep

Reading three designations · M24 × 2 − 6H − LH; M20 − 6g; M20 × L5 − P2.5 − 6g
  1. M24 × 2 − 6H − LH: fine pitch 2 (coarse would be 3), internal (upper case H), left hand; D1 = 24 − 1.0825 × 2 = 21.835 mm, drill about 22 mm
  2. M20 − 6g: no pitch written, so coarse 2.5; external; right hand
  3. M20 × L5 − P2.5 − 6g: lead 5, pitch 2.5, so 5/2.5 = 2 starts; the nut moves 5 mm per turn
  4. On a drawing the designation sits on a leader to the major diameter (the crest of a bolt, the root of a hole)

Answer: Fine LH nut thread; coarse RH bolt; two-start thread with 5 mm lead

Chapter 7

Hexagonal and square nuts and bolts: the approximate method and the standard sizes

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Part B

How is a hexagonal nut drawn by the approximate method?

Everything follows from the bolt diameter d: width across flats s = 1.5d + 3, nut height m = d, bolt-head height k = 0.8d, a 30° chamfer starting on a circle of diameter s. Across the corners the width is e = 2s/√3. For M20 that gives s = 33, e = 38.1, m = 20 and k = 16 mm. The front view across corners shows three faces and is e wide; the side view across flats shows two faces and is s wide. Turn the nut to watch both.

Hexagonal nut and bolt: the approximate method against the ISO table, across corners and across flats, with true chamfer curves: interactive loads as you scroll

What are the curves on the faces of a nut?

The 30° chamfer is a cone, and a flat face cuts a cone in a hyperbola. On every face the curve touches the end face at mid-flat, where the chamfer circle meets the flat. It drops most at the corners, by (e − s)/2 × tan 30°: 1.47 mm on an approximate M20 nut. Drawing offices draw these curves as circular arcs through the same points. CAD software draws the true hyperbola, which is what the interactive shows.

How close are the approximate proportions to the ISO tables?

Close enough for a sketch, not for a production drawing. For M20, ISO 4032 gives s = 30 and m = 18, and ISO 4014 gives a head height k = 12.5 mm. The approximate method gives 33, 20 and 16: 3, 2 and 3.5 mm too big. Spanner sizes also changed when DIN 934 gave way to ISO: M10 went from 17 to 16 mm and M12 from 19 to 18 mm. Many Indian shops still use the older nuts, so check which standard the parts list names.

Where do square nuts fit, and how is a bolted joint drawn?

A square nut (side 1.5d + 3, height d, chamfered on one side) has a large bearing face and does not turn in a slot. Across its corners an M20 is 46.7 mm, s√2. A bolted joint is drawn in section with the two plates hatched in opposite directions. The bolt, washer and nut are left unhatched, and the bolt's thread is hidden where it passes through the nut. For two 20 mm plates the M20 bolt needs at least 68 mm, so you order 70 mm. Sizing the bolt for its load belongs in the Design of Machine Elements book.

Predict, then check

Looking at a hexagonal nut across its corners, how many faces do you see in the front view?

Worked examples

Draw an M24 nut by the approximate method · d = 24 mm; s = 1.5d + 3, m = d, chamfer 30° from a circle of Ø s
  1. s = 1.5 × 24 + 3 = 39 mm; m = 24 mm
  2. e = 2 × 39/√3 = 45.03 mm; side of the hexagon = s/√3 = 22.52 mm = e/2
  3. Plan: hexagon on a Ø45.03 circle, chamfer circle Ø39, thread end circles
  4. Corner drop of the chamfer curve = (45.03 − 39)/2 × tan 30° = 1.74 mm
  5. Front view across corners 45.03 wide, side view across flats 39 wide, both 24 high

Answer: s = 39, e = 45.03, m = 24 mm; curves drop 1.74 mm at the corners

Approximate against ISO for an M16 bolt and nut · M16; ISO 4032 s = 24, m = 14.8; ISO 4014 k = 10
  1. Approximate: s = 27, m = 16, k = 0.8 × 16 = 12.8 mm
  2. Differences: s +3, m +1.2, k +2.8 mm
  3. Across corners: 31.18 (approx) against 27.71 mm (ISO)
  4. Approximate drawings run slightly large; production drawings and CAD libraries use the table

Answer: The approximate nut is 3 mm wider across flats and 1.2 mm taller

Choose the length of an M16 bolt · Two 16 mm plates (illustrative), ISO 7089 washer 17/30/3, ISO 4032 nut m = 14.8, at least 2P beyond the nut
  1. Grip 32 + washer 3 + nut 14.8 + 2 × 2 = 53.8 mm
  2. Round up to a stock length: L = 55 mm, so the bolt projects 5.2 mm past the nut
  3. Thread length 2d + 6 = 38 mm (illustrative), so the thread starts 17 mm from the head
  4. 17 mm is inside the 32 mm grip, so the nut can always be tightened

Answer: M16 × 55 bolt

Chapter 8

Studs, cap screws, set screws, washers and locking devices

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Part B

When do you use a bolt, a stud or a cap screw?

A bolt passes through clearance holes in both parts and is tightened with a nut, so it suits two thin parts. When one part is thick, like a cylinder block, its hole is tapped. A stud stays screwed into that part and the cover comes off by removing nuts, so the tapped thread is not worn by repeated assembly. A cap screw goes straight into the tapped hole, with no nut. A common proportion screws the stud's metal end about 1d into steel and 1.5d into cast iron: 12 and 18 mm for M12.

How do the heads of cap screws differ on a drawing?

A hex head (ISO 4017) is turned with a spanner: M12 is 18 across flats with k = 7.5 mm. A socket head (ISO 4762) takes a hex key and usually sits in a counterbore; M12 has dk = 18, k = 12 and a 10 mm key. A countersunk socket screw (ISO 10642) has a 90° head that sits flush in a 90° countersink: for M12, k = (26.88 − 12)/2 = 7.44 mm. Cheese and round slotted heads take a screwdriver. Pick each head and size in the interactive.

Cap screws, set screws and studs, and locking devices that stop a nut working loose under vibration: interactive loads as you scroll

How does a set screw hold a collar or pulley on a shaft?

A set screw is headless. It runs through a tapped radial hole in the hub, and its point presses on the shaft. A flat point bears on a flat ground on the shaft and allows frequent adjustment. A cone point sits in a conical seat and a dog point enters a drilled hole: both locate the hub positively. A cup point's sharp rim bites into a round shaft. Set screws carry light loads; a heavier drive needs a key, with the set screw only stopping the hub from sliding.

Why do nuts work loose, and how do locking devices stop them?

Vibration that makes the joint slip sideways lets the nut turn back a little each cycle. Every turn back lifts it one pitch, 1.75 mm on M12, and the clamping force fades. Friction devices add resistance: a lock nut jammed against the nut, a nylon insert that drags on the thread, or a spring washer. Positive devices stop rotation mechanically: a castle or slotted nut with a split pin, a tab washer bent against a flat, or a locking plate. Shake the joint with each device in the interactive.

Predict, then check

Which of these is a positive locking device rather than a friction one?

Worked examples

An M10 socket head cap screw in a counterbore · ISO 4762 M10: dk = 16, k = 10, key 8 mm; counterbore Ø dk + 0.16d, depth k + 0.1d (illustrative clearances)
  1. Counterbore Ø = 16 + 0.16 × 10 = 17.6 mm
  2. Counterbore depth = 10 + 0.1 × 10 = 11 mm, so the head sits 1 mm below the surface
  3. Clearance hole for the shank: 1.1d = 11 mm (illustrative)
  4. Draw the screw unsectioned, the socket as hidden lines, and the plate hatched around the counterbore

Answer: Counterbore Ø17.6 × 11 deep for an M10 SHCS

A flush countersunk M8 screw · ISO 10642 M8: dk = 17.92, k = 4.96, key 5; 90° countersink starting at Ø dk + 0.06d into a 1.1d hole (illustrative)
  1. Check the head: (17.92 − 8)/2 = 4.96 mm = k, the geometry of a 90° cone
  2. Countersink Ø at the surface = 17.92 + 0.48 = 18.4 mm; hole = 8.8 mm
  3. Countersink depth = (18.4 − 8.8)/2 = 4.8 mm at 45° per side
  4. The head top sits (18.4 − 17.92)/2 = 0.24 mm below the surface: flush, not proud

Answer: Countersink Ø18.4 × 90°, head 0.24 mm below flush

How far an unlocked M12 nut backs off · M12 coarse, P = 1.75 mm; a plain nut on a vibrating joint (the interactive); a castle nut with 6 slots
  1. After 0.402 turn the nut has risen 0.402 × 1.75 = 0.7 mm
  2. After 1.5 turns: 1.5 × 1.75 = 2.625 mm, and the joint is loose
  3. A castle nut can only be pinned at a slot, every 60°, so it may need up to 1/6 turn more: 1.75/6 = 0.292 mm of travel
  4. With any locking device fitted the counter stays at 0

Answer: 0.7 mm after 0.4 turn; castle nut steps of 0.29 mm

Chapter 9

Foundation bolts: eye, bent, rag, Lewis and cotter bolts

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU not in syllabus

What does a foundation bolt do, and how is it drawn?

It holds a machine's base plate down on a concrete foundation, so the machine cannot lift, slide or rock. The drawing is a section through the bolt axis: the concrete is cut and shown with a material pattern of dots and small triangles, which SP 46 allows when a legend says what it means; the base plate is hatched; the bolt, nut and washer are not cut, because fasteners are never sectioned lengthwise. IS 5624:1993 covers foundation bolts from M8 to M72 and leaves the shank form to agreement between buyer and supplier.

How do the eye, bent, rag, Lewis and cotter bolts stop pull-out?

Each anchor gives the concrete something to push against. An eye bolt pulls on a cross bar threaded through its eye; a bent bolt's hook bears on the concrete in its bend. A rag bolt has a widening, jagged end set in grout like a wedge. A Lewis bolt has a head tapered on one side that wedges in a matching pocket, held there by a key. A cotter bolt passes down to an access pocket, where a cotter through its slot bears on an anchor plate. Drag the Pull slider to see where the reactions act.

Foundation bolts in concrete: eye, bent, rag, Lewis and cotter bolts and how each resists pull-out: interactive loads as you scroll

Cast in or grouted: why leave a pocket?

A cast-in bolt has to be held exactly in place while the concrete is poured. A pocket is the alternative: a hole is left in the foundation, the machine is set and levelled with the bolts hanging in the pockets, and then grout (cement-sand mortar) is poured round them. Here the rag bolt's pocket is 4d wide at the top and 5d at the bottom, so 80 mm and 100 mm for M20 (illustrative). Making it wider at the bottom stops the grout plug itself from pulling out.

Which foundation bolts can be removed later?

Cast-in and grouted bolts (eye, bent, rag) stay in the concrete for good; replacing one means breaking the concrete. A Lewis bolt comes out once its key is pulled: in this design the M24 head is 43.2 mm wide and the pocket mouth 44.4 mm, so the head passes only with the 19.2 mm key out. A cotter bolt is freed by knocking the cotter out from the access pocket. All proportions here are illustrative multiples of d; the embedded length needed for strength is a design question for the Design of Machine Elements book.

Predict, then check

Which of these foundation bolts can be taken out without breaking the concrete?

Worked examples

Draw an M20 eye foundation bolt · M20 bolt, this chapter's illustrative proportions: embedded length 12d, eye Ø 3d with a 1.4d hole, cross bar Ø 1.25d × 8d, base plate 1.25d, washer 2d × 0.15d, nut by the approximate method
  1. Embedded length L = 12 × 20 = 240 mm, from the top of the concrete to the bottom of the eye
  2. Eye: outside Ø 3 × 20 = 60 mm, hole Ø 1.4 × 20 = 28 mm; bar Ø 1.25 × 20 = 25 mm, 160 mm long
  3. Clearance of the bar in the eye: (28 − 25)/2 = 1.5 mm all round
  4. Nut: s = 1.5 × 20 + 3 = 33 mm across flats, e = 2s/√3 = 38.1 mm across corners, m = d = 20 mm
  5. Washer Ø 40 × 3 mm; base plate 25 mm thick, hatched; concrete shown with its legend; bolt and nut not hatched

Answer: L = 240 mm, eye Ø 60/28, bar Ø 25 × 160, nut 33 A/F × 20

Grout for an M30 rag bolt · Square pocket (illustrative) 4d wide at the top, 5d at the bottom, 13d deep; round shank from the top down to 5d above the bottom, then the rag end, d thick, widening from d to 2d (jags ignored)
  1. Pocket: 120 mm square at the top, 150 mm at the bottom, 390 mm deep
  2. Frustum volume = h/3 × (A1 + A2 + √(A1·A2)) = 390/3 × (14400 + 22500 + 18000) = 7.137 litres
  3. Shank: π/4 × 30² × 210 = 0.1484 litres; rag end: 30 × (30 + 60)/2 × 150 = 0.2025 litres
  4. Grout = 7.137 − 0.351 = 6.79 litres per bolt

Answer: About 6.8 litres of grout per bolt

Can the Lewis bolt come out? · M24 Lewis bolt, this chapter's design: head 1.8d wide (tapered over 3d on one side), pocket mouth 1.85d wide, key 0.8d wide
  1. Head width 1.8 × 24 = 43.2 mm; mouth 1.85 × 24 = 44.4 mm; key 0.8 × 24 = 19.2 mm
  2. Key in: the space left in the mouth is 44.4 − 19.2 = 25.2 mm, less than 43.2 mm, so the head is trapped
  3. Key out: 43.2 mm ≤ 44.4 mm, so the bolt slides across into the key's space and lifts out, 1.2 mm to spare
  4. The taper face is inclined at atan(0.8/3) = 14.9° to the bolt axis

Answer: Trapped with the key in (25.2 mm space for a 43.2 mm head); free with it out

Chapter 10

Keys on drawings: saddle, sunk, gib-head, feather and Woodruff keys and splined shafts

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU not in syllabus

What are saddle, sunk, gib-head and feather keys?

A key locks a hub (pulley, gear, coupling) to a shaft so they turn together. A saddle key sits only in the hub keyway: hollow underneath to hug the round shaft, or flat on a flat ground on it. It holds by friction, so it suits light duty. A sunk key sits half in a keyseat in the shaft and half in the hub. A gib-head key is a sunk key with a 1 in 100 taper and a head for knocking it out. A feather key is fixed to the shaft so the hub can slide along it.

How do you choose the key size and dimension the keyway?

Look up the shaft diameter in the parallel-key table (DIN 6885-1). A Ø40 shaft falls in 'over 38 up to 44': key 12 × 8, shaft depth t1 = 5, hub depth t2 = 3.3. A production drawing dimensions what a caliper can measure: across the shaft from the keyseat bottom, 40 − 5 = 35 mm, and across the bore from the keyway top, 40 + 3.3 = 43.3 mm. Since t1 + t2 = 8.3 is more than h = 8, a 0.3 mm clearance is left above the key.

Keys and keyways: saddle, sunk, gib-head, feather, Woodruff and splines, with the standard key size for the shaft: interactive loads as you scroll

What is a Woodruff key and how is its size given?

A Woodruff key is a half-disc: a segment of a circle of diameter D, height h and width b, sitting in a matching curved seat cut by a disc cutter. It is written b × h × D, for example 5 × 7.5 × 19. Its straight top edge is the chord, 2√(h(D − h)) = 18.57 mm, the length listed in DIN 6888. It can rock in its seat to line up with a tapered hub, but the deep seat weakens the shaft.

When are splines used, and how are they drawn?

Splines are keys machined as part of the shaft itself, several of them round the circumference, so they carry more torque and let a hub slide. ISO 14 straight-sided splines are written N × d × D: 6 × 23 × 26 has 6 splines 6 mm wide, minor Ø 23 and major Ø 26, so each spline stands 1.5 mm proud. The hub fits on the minor diameter (internal centering). In the side view the major diameter is drawn thick and the minor thin, like a thread. Torque capacity belongs in the Design of Machine Elements book.

Predict, then check

On the production drawing of a keyed shaft, how is the keyseat depth usually given?

Worked examples

Keyway sizes for a Ø40 shaft · Ø40 shaft, hub with a parallel key (DIN 6885-1)
  1. Table row: over 38 up to 44 mm, so b × h = 12 × 8, t1 = 5.0, t2 = 3.3
  2. Shaft drawing: keyseat 12 wide, size across the shaft from its bottom 40 − 5 = 35 mm
  3. Hub drawing: keyway 12 wide, size across the bore from its top 40 + 3.3 = 43.3 mm
  4. Check: t1 + t2 = 8.3 mm > h = 8 mm, so 0.3 mm clearance on top of the key

Answer: Key 12 × 8; dimension 35 on the shaft and 43.3 on the hub

Gib-head key on a Ø50 shaft · Ø50 shaft, hub 80 mm long, gib-head key with a 1 in 100 taper (height h at the large end)
  1. 50 mm is 'over 44 up to 50': b × h = 14 × 9; a Ø50.5 shaft would already need 16 × 10
  2. Over the 80 mm hub the key height falls by 80/100 = 0.8 mm: 9 mm at the large end, 8.2 mm at the small end
  3. The hub keyway top slopes 1 in 100 to match; the shaft keyseat stays parallel
  4. Head (illustrative): height 1.75h = 15.75 mm, standing clear of the hub face so a drift can drive it out

Answer: 14 × 9 key, 9 to 8.2 mm high over the hub

Check a Woodruff key's table values · Woodruff key 5 × 7.5 × 19 (DIN 6888 lists L ≈ 18.57 mm and 4.09 kg per 1000); steel 7.85 g/cm³
  1. Chord L = 2√(7.5 × (19 − 7.5)) = 2√86.25 = 18.57 mm
  2. Segment area = R²·acos((R − h)/R) − (R − h)·√(2Rh − h²) with R = 9.5: 122.62 − 2 × 9.287 = 104 mm²
  3. Volume = 104 × 5 = 520 mm³; mass = 520 × 0.00785 = 4.08 g
  4. So 1000 keys weigh about 4.08 kg, matching the table's 4.09 kg

Answer: L = 18.57 mm and 4.08 g per key: the table checks out

Chapter 11

Cotter joints: socket and spigot, sleeve and cotter, and gib and cotter (strap) joints

Which syllabus covers thisAU ME3381 Part IIVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Part B

What is a cotter joint and where is one used?

A cotter joint connects two rods that pull or push along their common axis, not rods that turn. A cotter, a flat bar tapered along one edge, passes through slots in both parts and locks them. The socket and spigot joint puts one rod's end (the spigot) inside the other's (the socket); the sleeve and cotter joint slides a sleeve over both rod ends with two cotters; the gib and cotter joint wraps a strap round a square rod end, with a gib beside the cotter. Knocking the cotter out takes the joint apart.

Why is the cotter tapered, and how far does it draw the rods together?

Driving the cotter in puts its wider part where it bears on the slot faces, so the two parts are pulled together, like a wedge. Each millimetre of travel draws them by the taper: with a typical 1 in 30 cotter, 30 mm of travel draws 1 mm. Quoted tapers run from 1 in 48 to 1 in 24. A flatter taper holds itself better against working loose but needs more travel for the same draw. Drive the cotter in the interactive and watch the gap in detail X close.

Cotter joints assembled: the tapered cotter driven in draws the rods together in socket and spigot, sleeve and strap joints: interactive loads as you scroll

Why do the slots have clearance, and on which side?

The cotter bears on one face of each slot: the rod's slot face nearer its end, and the socket's or sleeve's face on the other side. The opposite faces get a clearance, 1.5 to 3 mm in one design guide, so the rod can move as it is drawn in. This chapter's joints use 2 mm, more than the 1 mm the cotter has to draw before the joint is tight (illustrative). Without that clearance the cotter would jam against the wrong face and never pull the parts together.

How is a cotter joint drawn?

The front view is a full section along the rod axis. The socket and spigot (or sleeve, strap and rods) are hatched in different directions, while the cotter and gib, lying lengthwise in the cutting plane like keys, are left unhatched. The plan below is an outside view showing the ends of the cotter. The proportions here are this book's own multiples of d: for d = 40 mm, spigot Ø48, socket Ø88, collar Ø68 × 18, cotter 52 × 12. Sizing for strength is in the Design of Machine Elements book.

Predict, then check

A cotter with a 1 in 24 taper is driven 18 mm further in. How far are the rods drawn together?

Worked examples

Slots for a socket and spigot joint · Rod d = 40 mm; this chapter's illustrative proportions: spigot 1.2d, socket 2.2d, collar 1.7d × 0.45d, cotter 1.3d wide (at the axis, when tight) × 0.3d; taper 1 in 30; slot clearance 2 mm
  1. Spigot Ø48, socket outside Ø88, collar Ø68 × 18, cotter 52 × 12 mm
  2. Spigot slot length (along the axis) = cotter width + clearance = 52 + 2 = 54 mm
  3. The socket slot runs up to the socket's outside (1.1d = 44 mm from the axis), where the cotter is 44/30 = 1.47 mm wider
  4. Socket slot length = 52 + 1.47 + 2 = 55.47 mm

Answer: Spigot slot 54 mm, socket slot 55.5 mm, both 12 mm wide

Travel needed for three tapers · The joint is tight after a draw of 1 mm (illustrative); cotter tapers 1 in 48, 1 in 30 and 1 in 24
  1. Travel = draw ÷ taper = draw × 48, × 30 or × 24
  2. 1 in 48: 48 mm; 1 in 30: 30 mm; 1 in 24: 24 mm
  3. The cotter must stand that far proud before driving, so a flatter taper needs a longer cotter
  4. The flatter the taper, the smaller the force that tries to push the cotter back out

Answer: 48, 30 and 24 mm of travel

Gib and cotter on a strap end · Square rod, d = 40 mm; gib and cotter each 0.45d wide with the 1 in 30 taper between them; 1 mm to draw
  1. The gib's face and the cotter's face are tapered alike, so the pair's outer faces stay parallel: it acts like one bar of width 36 mm when tight
  2. Before driving, the pair is 1 mm narrower: 35 mm
  3. After 15 mm of travel: 35 + 15/30 = 35.5 mm, so the rod has been drawn 0.5 mm into the strap
  4. The gib's hooks grip the strap, so driving the cotter cannot spread the strap's arms

Answer: Width 35 → 36 mm; 30 mm of travel draws the full 1 mm

Chapter 12

The knuckle joint: parts, proportions and its two views

Which syllabus covers thisAU ME3381 Part IIVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Parts A, B

What are the parts of a knuckle joint and why is it used?

A knuckle joint joins two rods in tension while letting one swing relative to the other in a single plane. It has five parts: the eye end (a rod with a single eye), the fork end (a rod with a double eye, or jaws), the pin through all three eyes, a collar on the pin's free end and a taper pin through the collar and pin to hold it. Typical places are the tie rods of a roof truss, valve rods and links of a linkage, where the rods must be free to change angle a little.

What proportions does this chapter draw it with?

Every size is a multiple of the rod diameter d, a common way to proportion it; these numbers are this book's own (illustrative). Pin Ø d; eye Ø 2d and 1.25d thick; each jaw 0.75d thick, so the jaws together with the eye make a 2.75d stack; pin head and collar Ø 1.5d × 0.5d. For d = 30 mm: pin Ø30, eye Ø60 × 37.5, jaws 22.5 thick, head and collar Ø45. Change d in the interactive and the chips follow.

The knuckle joint in two views: eye, fork, pin and collar, the swing about the pin and an exploded view: interactive loads as you scroll

How are its two views drawn?

In first angle the front view, with the pin vertical, goes on top and the top view below it. The front view is a half section: the upper half is cut along the rod axis, so the eye and the fork are hatched in different directions, but the pin, collar and taper pin are not cut, because pins are never sectioned lengthwise. Hidden lines are left out of both halves. In the top view the eye sits under the top jaw, so its far half is drawn dashed.

How far can the eye rod swing?

Only in the plane at right angles to the pin; the jaws stop any other tilt. In that plane the eye boss is round about the pin, so nothing touches until the eye rod's side meets the corner of the fork root. In this design the root is 1.1d from the pin and the fork is 2d wide, which allows ±118.1°, far more than a tie rod ever needs. The interactive's slider covers ±20°.

Predict, then check

In the half-sectioned front view of a knuckle joint, which parts are hatched?

Worked examples

Sizes for a knuckle joint with d = 24 mm · This chapter's proportions: pin Ø d, eye Ø 2d × 1.25d, jaws 0.75d, head and collar Ø 1.5d × 0.5d, pin tail 0.375d below the collar
  1. Pin Ø 24 mm; eye Ø 48 mm, 30 mm thick; each jaw 18 mm thick
  2. Stack through the pin: 30 + 2 × 18 = 66 mm
  3. Head and collar: Ø 36 × 12 mm
  4. Pin length under the head: 66 + 12 (collar) + 9 (tail) = 87 mm

Answer: Pin Ø24 × 87 mm under the head; eye Ø48 × 30; jaws 18

Largest swing before contact · Fork root 1.1d from the pin axis, fork 2d wide (corner at 1.1d, −d), eye rod Ø d swinging about the pin
  1. The rod's side touches the corner when the corner is d/2 from the rod's centre line: 1.1·sin θ + cos θ = 0.5 (in units of d)
  2. Write it as R·sin(θ + φ) with R = √(1.1² + 1²) = 1.4866 and φ = atan(1/1.1) = 42.27°
  3. sin(θ + φ) = 0.5/1.4866, so θ + φ = 180° − 19.65° (the falling side)
  4. θ = 180 − 42.27 − 19.65 = 118.07°; a step-by-step search gives the same

Answer: ±118.1°, the same for every d

Reading the swing from both views · d = 30 mm, eye rod end 4.2d from the pin, rod swung 15° in the top view
  1. Rod end distance from the pin: 4.2 × 30 = 126 mm
  2. Top view: the end moves sideways by 126 × sin 15° = 32.6 mm
  3. Front view: the rod looks shorter, 126 × cos 15° = 121.7 mm, 4.3 mm less
  4. Its round end shows as an ellipse whose width is 30 × sin 15° = 7.8 mm

Answer: 32.6 mm sideways in plan, 4.3 mm shorter in the front view

Chapter 13

Riveted joints: rivet heads, lap and butt joints, chain and zigzag riveting

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Part B

How is a rivet drawn, and which head goes where?

A rivet is a plain shank with a head forged on, and the second head formed after it goes through the plates. The snap (round) head is the usual one: DIN 124 gives a 22 mm rivet a head 36 mm across and 14 mm high, about 1.6d by 0.65d. A countersunk head sits flush where nothing may stick out, and a pan head is a flat-topped cone. On a drawing the rivet is never hatched when the cutting plane runs along it, like a bolt or a shaft: only the plates around it are sectioned.

How do you pick the rivet diameter from the plate thickness?

Drawing offices start with Unwin's empirical rule, d = 6√t with t in millimetres, meant for plates over about 8 mm. Then round UP to a standard rivet size. For 12 mm plates 6√12 = 20.78 mm, so the rivet is 22 mm from the DIN 124 range. Pitch, margin and row spacing then follow as multiples of d. Unwin only gives a starting size: checking the joint for tearing, shearing and crushing is done in the Design of Machine Elements book.

Riveted joints laid out: lap and butt, chain and zigzag, rivet size from the plate thickness, pitch and margin: interactive loads as you scroll

What is the difference between a lap joint and a butt joint on the drawing?

In a lap joint one plate simply overlaps the other and the rivets pass through both. The pull is off-line, so the joint tends to bend. In a butt joint the plates meet edge to edge and one or two cover straps bridge the gap. With one strap a common proportion is 1.125t; with two straps, 0.75t each. For 16 mm plates that is 18 mm or 12 mm (illustrative). Two straps keep the load in line. In section each plate and strap gets its own hatching direction or spacing.

How do chain and zigzag riveting differ, and how are they spaced?

In chain riveting the rows line up across the joint. In zigzag riveting the second row sits in the gaps of the first. Common proportions are a pitch p = 3d, a margin m = 1.5d from the plate edge, a chain row pitch of 2d and a zigzag row pitch of 0.6p. For 22 mm rivets: p = 66, m = 33 and a zigzag row pitch of 39.6 mm. That gives a diagonal pitch of √(39.6² + 33²) = 51.5 mm, so the heads stay well clear.

Predict, then check

Unwin's rule gives 6√14 = 22.4 mm for a 14 mm plate. DIN 124 rivets come in 22 and 24 mm. Which do you draw?

Worked examples

Lay out a double-riveted zigzag lap joint · Two 12 mm plates, lap joint, two rows zigzag, snap heads; common proportions (illustrative)
  1. Unwin: d = 6√12 = 20.78 mm, rounded up to the DIN 124 size 22 mm
  2. Pitch p = 3d = 66 mm; margin m = 1.5d = 33 mm
  3. Zigzag row pitch pb = 0.6p = 39.6 mm; diagonal pitch = √(39.6² + 33²) = 51.5 mm
  4. Overlap = 2m + pb = 66 + 39.6 = 105.6 mm
  5. Snap head (DIN 124): Ø36 × 14 mm; rivets per pitch length = 2

Answer: d = 22 mm, p = 66 mm, m = 33 mm, rows 39.6 mm apart, overlap 105.6 mm

Single-strap and double-strap butt joints · 16 mm plates, single riveted on each side of the butt line; straps 1.125t (single) or 0.75t (double), common proportions
  1. Unwin: 6√16 = 24 mm, already a standard size, so d = 24 mm
  2. Single strap: 1.125 × 16 = 18 mm thick; double straps: 0.75 × 16 = 12 mm each
  3. Strap width: m to the row and m to the strap edge on each side = 4m = 4 × 36 = 144 mm
  4. Pitch along the seam p = 3d = 72 mm

Answer: d = 24 mm; strap 18 mm (single) or 2 × 12 mm (double), 144 mm wide; pitch 72 mm

Check the heads in a chain-riveted joint · 10 mm plates, chain riveting with rows 2d apart; snap heads, or countersunk 90° to Ø1.5d (illustrative)
  1. Unwin: 6√10 = 18.97 mm, so d = 20 mm; DIN 124 head Ø32 × 13 mm
  2. Row pitch 2d = 40 mm; clearance between heads = 40 − 32 = 8 mm
  3. Countersunk instead: top Ø = 1.5d = 30 mm, depth = (30 − 20)/2 = 5 mm (90° cone)
  4. The 5 mm countersink fits in the 10 mm plate, leaving a parallel hole underneath

Answer: Heads Ø32 mm on 40 mm rows leave 8 mm; a countersink would be 5 mm deep

Chapter 14

Welded joints and welding symbols: the arrow line, reference line and weld symbols

Which syllabus covers thisAU ME3381 Part IVTU not in syllabusSPPU not in syllabusMU 2403116 Module IKTU not in syllabus

What are the parts of a welding symbol?

SP 46:2003 Section 18, based on ISO 2553, builds every weld callout the same way. An arrow line touches the joint. A reference line runs from it, parallel to the bottom of the sheet: a continuous line with a dashed line beside it, above or beneath. The weld symbol sits on that line. Sizes go to the left of the symbol and lengths to the right. A tail at the far end carries the process and other notes when needed. The symbol saves drawing an extra view of the weld.

How does the symbol say which side of the joint gets the weld?

The side the arrow touches is the arrow side, and the far side is the other side. In ISO 2553, as SP 46 uses it, a symbol on the continuous-line side means the arrow side and a symbol on the dashed-line side means the other side. A weld on both sides, drawn symmetrically, drops the dashed line. American AWS A2.4 drawings have no dashed line: below the line is the arrow side and above is the other side. The same picture can mean opposite things, so check which system the drawing uses.

Build a welding symbol and see the joint it asks for: weld type, arrow side or other side, size and finish: interactive loads as you scroll

Which symbols should you know, and what do the extra marks add?

Each symbol looks like the weld's cross-section. A triangle with its upright leg always on the left is a fillet. Two bars are a square butt and a V is a single-V butt. A bar with a slanted line is a single-bevel butt, and the arrow points at the bevelled plate. An open box is a plug weld, a circle a spot weld, a circle with two lines through it a seam. A V on both sides makes an X, a bevel on both sides a K. A bar or arc over the symbol asks for a flat, convex or concave face. A circle at the elbow means weld all round; a flag means weld on site.

How are weld sizes written?

Section sizes go before the symbol and lengths after it. With no length the weld runs the full length of the joint. A fillet is sized by its throat a or its leg z, and the letter is always written: a5 means a 5 mm throat, which is a leg of 5√2 = 7.1 mm. A butt weld with no size is a full-penetration weld; s8 would ask for 8 mm penetration. Plug and spot welds give the diameter, and spot or plug welds add n(e), the number and spacing. Weld strength is worked out in the Design of Machine Elements book.

Predict, then check

On an SP 46 (ISO) drawing the fillet triangle hangs below the dashed line, which is drawn under the continuous line. Where is the weld?

Worked examples

Read an ISO fillet weld symbol · Arrow to a T-joint; on the continuous line (dashed line beneath): a6 then the fillet triangle, nothing to the right
  1. The symbol sits on the continuous-line side, so the weld is on the arrow side of the joint
  2. a6 = throat 6 mm; leg z = 6√2 = 8.49 mm
  3. Nothing after the symbol, so the weld is continuous over the whole length
  4. No contour symbol, so the face shape is left to the welder

Answer: A continuous fillet on the arrow side, 6 mm throat (leg ≈ 8.5 mm)

Redraw an AWS fillet in ISO style · AWS drawing: fillet triangle below the reference line with 8 to its left (leg size)
  1. AWS: below the line = arrow side; the number is the leg, 8 mm
  2. ISO: put the symbol on the continuous-line side (arrow side), with the dashed line under it
  3. Write the size with its letter: z8, or as a throat a = 8/√2 = 5.66 mm
  4. Writing a5.5 would shrink the weld, so keep z8 (or a5.66) to keep the meaning exact

Answer: z8 fillet on the continuous line (dashed line beneath); the equivalent throat is a = 5.66 mm

Read a spot weld callout · Lap joint of two sheets; circle centred on the reference line, 5 to its left, 4(50) to its right
  1. A circle centred on the line is a resistance spot weld at the interface of the lapped sheets
  2. 5 before the symbol = spot diameter 5 mm
  3. 4(50) after it = 4 spots at 50 mm spacing
  4. First to last spot = (4 − 1) × 50 = 150 mm; the end distance is dimensioned on the drawing, not in the symbol

Answer: 4 spot welds Ø5 mm, 50 mm apart, spanning 150 mm

Chapter 15

Rigid couplings: muff, split muff (clamp), flange and protected flange couplings

Which syllabus covers thisAU ME3381 Part IIVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Parts A, B

What does a rigid coupling do, and when can you use one?

A rigid coupling locks two shaft ends together so they turn as one solid shaft. It passes torque but forgives no misalignment: the shafts must be lined up within very small limits, or the coupling bends them and loads the bearings. So rigid couplings join shafts that sit in well-aligned bearings, such as line shafts. All four types here, muff, split muff, flange and protected flange, are keyed to the shafts. DIN 6885-1 gives a 40 mm shaft a 12 × 8 key.

How are the muff and split muff couplings proportioned?

A muff coupling is a plain sleeve slid over both shaft ends, with one key running through. A common proportion (illustrative) is an outside diameter 2d + 13 and a length 3.5d: 93 mm by 140 mm for a 40 mm shaft. To fit it, a shaft has to slide out lengthwise. The split muff (clamp) coupling cuts the sleeve along the axis into two halves bolted round the shafts, so it can go on without moving them. Its bolts, here 4 × M10 on an outer diameter 2.5d = 100 mm, sit with their nuts and heads in recesses.

How is a flange coupling drawn?

Two flanged hubs, each keyed to its shaft, are bolted face to face. A spigot on one fits a recess in the other to line up the shafts. Common proportions for d = 40 (illustrative): hub Ø80, pitch circle 120, flange Ø160 and 4 bolts of 0.5d/√n, so M10. The upper half is drawn in section: the two flanges hatched in opposite directions, while the shafts, keys and the bolt in the cutting plane are left unhatched. The end view shows the bolt heads on the pitch circle.

Rigid couplings half in section: muff, split muff, flange and protected flange, proportioned to the shaft: interactive loads as you scroll

What does the protected flange coupling add?

A rim on each flange runs past the bolt heads and nuts, so nothing sticks out to catch clothing or a sleeve. The rim has to clear the nuts. For d = 40, the bore of the rim must be at least PCD + nut across-corners + 2 × 3 mm = 120 + 18.5 + 6 = 144.5 mm. A 0.25d rim then makes the flange Ø165 instead of 160 (illustrative). Bolt shear and flange shear are checked in the Design of Machine Elements book.

Predict, then check

In the upper-half section of a flange coupling, which parts are hatched?

Worked examples

Proportion a flange coupling for a 50 mm shaft · d = 50 mm; hub 2d, half length 1.5d, flange 0.5d, PCD 3d, flange Ø4d, 4 bolts of 0.5d/√n rounded up to an ISO first-choice size (illustrative)
  1. Hub Ø100, each half 75 mm long, flange 25 mm thick, PCD 150, flange Ø200 mm
  2. Bolt Ø = 0.5 × 50/√4 = 12.5 mm, so M16 (s = 24 mm, across corners e = 27.71 mm)
  3. Head corner to hub: 75 − 13.86 − 50 = 11.1 mm clear
  4. Head corner to flange rim: 100 − 75 − 13.86 = 11.1 mm clear
  5. Adjacent bolts are 106.1 mm apart (chord), far more than e

Answer: Hub Ø100, PCD 150, flange Ø200, 4 × M16, every head 11.1 mm clear

Dimension the keyway of a muff coupling · d = 60 mm muff coupling; outside diameter 2d + 13, length 3.5d (illustrative); DIN 6885-1 key
  1. Sleeve: Ø133 × 210 mm
  2. Key for 58-65 mm shafts: 18 × 11, shaft depth t1 = 7, hub depth t2 = 4.4
  3. Shaft keyway dimension: d − t1 = 60 − 7 = 53 mm
  4. Sleeve keyway dimension: d + t2 = 60 + 4.4 = 64.4 mm
  5. Radial clearance over the key: 7 + 4.4 − 11 = 0.4 mm

Answer: Sleeve Ø133 × 210; key 18 × 11; dimension 53 on the shaft and 64.4 in the sleeve

Size the rim of a protected flange coupling · d = 40 mm, PCD 120, 4 × M10 (ISO 4032 nut s = 16, m = 8.4; head k = 6.4); 3 mm clearance; rim 0.25d (illustrative)
  1. Nut across corners e = 2 × 16/√3 = 18.48 mm
  2. Rim bore ≥ 120 + 18.48 + 2 × 3 = 144.48 mm
  3. Flange Ø ≥ 144.48 + 2 × 10 = 164.48, so Ø165 (next 5 mm); rim bore 145 mm
  4. Rim length past the flange = larger of m and k + 3 = 8.4 + 3 = 11.4 mm

Answer: Flange Ø165 mm, rim bore 145 mm, rim 11.4 mm long

Chapter 16

Flexible couplings: bushed pin, Oldham's, universal and gear couplings

Which syllabus covers thisAU ME3381 Part IIVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU PCMEL307 Parts A, B

Why use a flexible coupling at all?

Two shafts on separate machines, like a motor and a pump on their own feet, are never perfectly in line, and they shift as things warm up and settle. The misalignment can be a parallel offset, an angle between the axes, or end float along the axis. A rigid coupling turns any of these into bending and bearing loads. A flexible coupling lets the shafts run slightly out of line, and a rubber-bushed one also softens shocks. Each type below takes a different kind of misalignment.

How is a bushed pin flexible coupling drawn?

It looks like a flange coupling, but the flanges never touch. Pins are nutted into one flange. They run in rubber bushes, with a brass sleeve, set in larger holes in the other flange. Illustrative numbers for d = 40: six Ø12 pins, bushes 28 mm outside, pitch circle 120, flange Ø170 and a 4 mm gap. In section the rubber gets its own close hatching and the pin stays unhatched. Offset the shafts by 1 mm and the rubber is squeezed to 5 mm on one side and stretched to 7 mm on the other.

What does the middle disc of an Oldham's coupling do?

Oldham's coupling (John Oldham, 1821) joins two parallel shafts that are offset. Each shaft has a flanged hub with a slot. The middle disc has a tongue on each face, at 90° to each other, sliding in those slots. The disc centre must lie on both slot lines, and those lines always cross at a right angle. So it stays on a circle whose diameter is the line between the two shaft centres: with an 8 mm offset, a Ø8 circle, run round twice for every shaft turn. That sliding is why the coupling suits small offsets.

Flexible couplings: bushed pin, Oldham's coupling running with an offset, the universal joint and the gear coupling: interactive loads as you scroll

When do you need a universal joint or a gear coupling?

A universal (Hooke's) joint links shafts at a large angle. Each shaft ends in a yoke, and the yokes are joined by a cross whose arms are at 90°. A single joint makes the output speed rise and fall twice a turn, which the Theory of Machines book works out. A gear coupling has a hub on each shaft with crowned external teeth (here 30 teeth, module 2.5, Ø80 tips) meshing inside one internal-toothed sleeve. Each mesh tips by a small angle, and with two meshes in series it takes angle and offset.

Predict, then check

An Oldham's coupling joins shafts 6 mm out of line running at 600 rpm. What does the centre of the middle disc do?

Worked examples

How fast does the Oldham disc centre move? · Offset e = 6 mm, shaft speed 600 rpm
  1. ω = 2π × 600/60 = 62.83 rad/s
  2. The centre runs on a circle of radius e/2 = 3 mm at 2ω
  3. Speed = (e/2)(2ω) = e·ω = 6 × 62.83 = 377 mm/s
  4. Check: circumference π × 6 = 18.85 mm × 1200 laps a minute ÷ 60 = 377 mm/s

Answer: About 0.38 m/s round a Ø6 mm circle, 1200 laps a minute

Lay out the pins of a bushed pin coupling · d = 40 mm; 6 pins Ø12, brass sleeve 2 mm, rubber 6 mm; PCD 3d = 120; hub Ø2d = 80 (illustrative)
  1. Bush outside Ø = 12 + 2 × (2 + 6) = 28 mm
  2. Bush to hub: 60 − 14 − 40 = 6 mm clear
  3. Adjacent pins: chord = 120 × sin 30° = 60 mm, so 32 mm between bushes
  4. Flange Ø = 120 + 28 + 2 × 10 = 168, rounded up to 170 mm
  5. With a 1 mm offset the rubber is 5 mm on one side and 7 mm on the other

Answer: Bushes Ø28 on a 120 PCD, flange Ø170; 6 mm to the hub, 32 mm between bushes

Size the teeth of a gear coupling · Hub teeth: module 2.5, 30 teeth, face 20 mm with a spherical tip; sleeve: internal teeth of the same module (illustrative)
  1. Pitch Ø = mz = 75 mm; hub tip Ø = m(z + 2) = 80 mm; hub root Ø = m(z − 2.5) = 68.75 mm
  2. Sleeve tip Ø = 75 − 2 × 2.5 = 70 mm; sleeve root Ø = 75 + 2.5 × 2.5 = 81.25 mm
  3. Mesh: 68.75 < 70 < 80 < 81.25, so the teeth overlap with root clearance on both
  4. Crown: the tip drops 40 − √(40² − 10²) = 1.27 mm at each end of the face
  5. A tilt of 0.75° at each mesh, the meshes tilted opposite ways, lets the shafts meet at 1.5°

Answer: Pitch Ø75, tips Ø80/Ø70, crown drop 1.27 mm

Chapter 17

Shaft bearings: bush bearing, plummer block, footstep bearing and rolling bearings on drawings

Which syllabus covers thisAU ME3381 Part IIVTU not in syllabusSPPU not in syllabusMU 2403116 Module IKTU PCMEL307 Part B

What is a bush bearing, and why does the drawing show the bush as a separate part?

A bush bearing is a cast-iron pedestal with a bore and a gun-metal bush pressed into it. The shaft runs on the bush, not on the casting, so when the bush wears it is pressed out and renewed while the body stays. The bush has a collar that locates it endwise and an oil hole drilled through body and bush. In the interactive's illustrative proportions for a 50 mm shaft the bush is Ø65 outside with a Ø80 collar, the boss Ø100, and the shaft centre 62.5 mm above the base. In the section the body and the bush are hatched in opposite directions because they are different parts.

Why is a plummer block split, and what does its parts list contain?

A plummer block carries a long line shaft, often with pulleys already on it, so the shaft cannot be threaded in endwise. The block is split at the shaft centre: the shaft is lowered onto the lower brass, the upper brass and the cap go on top and two bolts pull the cap down. The parts list has 5 items and 7 pieces: body, cap, two brasses, two bolts and a lubricator. In the drawing the left half is an outside view and the right half a section through the bolts; the bolts are cut lengthwise, so they are drawn in view, not hatched. For a 50 mm shaft the illustrative proportion of 0.28d asks for M16 bolts.

Bearings on drawings: bush bearing, an exploded plummer block, footstep bearing and rolling bearing symbols: interactive loads as you scroll

What is a footstep bearing, and how is the shaft shown on its drawing?

A footstep (pivot) bearing supports the bottom end of a vertical shaft, so its load is axial. The shaft end stands on a hardened steel pad at the bottom of the bore; a small pin stops the pad from turning, and a gun-metal bush guides the shaft sideways. The shaft is not part of the bearing, so the assembly drawing shows it as an adjacent part: long-dashed double-dotted narrow lines, not hatched, allowed to be hidden by the bearing (SP 46 clause 10.3.1). The parts list then has four items: body, bush, pad and pin, and no shaft.

How are rolling bearings shown on a drawing, and what does 6210 mean?

A ball or roller bearing is bought, not made, so it gets one row in the parts list, called by its designation, and no detail drawing. In an assembly it can be drawn in detail (rings hatched in opposite directions, balls left unhatched) or by the ISO 8826-1 general simplified representation: the outline of its section with a free-standing upright cross that does not touch the outline, on one or both sides of the axis. In 6210, the 62 is a light-series deep groove ball bearing and 10 × 5 = 50 mm is the bore; the 62-series table gives D = 90 mm and B = 20 mm.

Predict, then check

In the plummer block's half section the cutting plane passes through the body, the cap, the brasses and the two cap bolts. Which of them is drawn without hatching?

Worked examples

Size a plummer block for a 60 mm shaft (illustrative proportions) · Shaft d = 60 mm. Proportions used in this chapter: brass outside 1.4d, brass flange 1.7d, centre height 1.4d, base 4d long and 0.35d thick, cap bolts ≥ 0.28d at ±1.07d from the centre.
  1. Brass outside Ø = 1.4 × 60 = 84 mm; flange Ø = 1.7 × 60 = 102 mm.
  2. Centre height = 1.4 × 60 = 84 mm; base = 4 × 60 = 240 mm long, 0.35 × 60 = 21 mm thick.
  3. Bolt ≥ 0.28 × 60 = 16.8 mm, so the next standard size M20; its head is s = 30 mm across flats, e = 2s/√3 = 34.64 mm across corners.
  4. Bolt centres at ±1.07 × 60 = ±64.2 mm, i.e. 128.4 mm apart; each head spans 46.88 to 81.52 mm from the centre, inside the cap's flat (44.19 to 84 mm).

Answer: Brasses Ø84 (flange Ø102), centre height 84 mm, base 240 × 21 mm, two M20 cap bolts 128.4 mm apart.

Read a bearing designation and draw it simplified · An assembly calls for a 6212 deep groove ball bearing.
  1. 62: deep groove ball bearing, light series (dimension series 2).
  2. Bore code 12 × 5 = 60 mm; the 62-series table gives D = 110 mm, B = 22 mm.
  3. Section height (D − d)/2 = (110 − 60)/2 = 25 mm, so each side of the axis gets a 22 × 25 mm outline.
  4. ISO 8826-1: put a free-standing upright cross in each outline; arms of about 7.04 mm each way keep it clear of the 22 mm sides.

Answer: 6212 = d 60, D 110, B 22 mm; drawn as two 22 × 25 mm outlines with free-standing crosses, one parts-list row, bought out.

Proportions and parts list of a footstep bearing for a 40 mm shaft · Vertical shaft d = 40 mm; illustrative proportions: bore 1.4d, body 2.2d, base 3.6d, pad 0.2d thick, pin 0.12d, bush collar 1.7d.
  1. Bore for the bush and pad = 1.4 × 40 = 56 mm; body Ø = 2.2 × 40 = 88 mm; base = 3.6 × 40 = 144 mm.
  2. Pad thickness = 0.2 × 40 = 8 mm; pin Ø = 0.12 × 40 = 4.8 mm; bush collar Ø = 1.7 × 40 = 68 mm.
  3. Parts list: 1 body (CI), 2 bush (GM), 3 pad (hardened steel), 4 pin (MS); the shaft is an adjacent part and gets no row.
  4. In the section: body, bush and pad hatched (bush and pad at 135° with different spacing, body at 45°); the pin, cut along its axis, is left in view.

Answer: Bore Ø56, body Ø88, base 144 mm, pad 8 mm; four items, the shaft shown long-dashed double-dotted.

Chapter 18

Valves: lever and spring-loaded safety valves and the non-return valve

Which syllabus covers thisAU ME3381 Part IIVTU not in syllabusSPPU not in syllabusMU not in syllabusKTU not in syllabus

How does a non-return valve open and shut?

A non-return (lift check) valve passes flow one way only. Its disc rests on a renewable gun-metal seat; inlet pressure p1 pushes up on the seat area, outlet pressure p2 and the disc's weight push down on the larger disc. In the interactive's illustrative valve (seat Ø50 = 1963.5 mm², disc Ø56 = 2463 mm², disc 2.46 N) with p2 = 3 bar it lifts only when p1 exceeds 3.78 bar. A stem sliding in the cover's boss guides the disc and stops it at 8 mm lift; when the flow reverses the disc drops back onto the seat.

When does a lever safety valve blow off?

The weight W on the lever, at arm L from the fulcrum, presses the valve shut through a spindle at the short arm a. Moments about the fulcrum: the valve lifts when p·A·a exceeds W·L (lever and valve weights neglected). With the interactive's illustrative W = 240 N, a = 40 mm, L = 200 mm and a Ø50 seat, p = 6.11 bar. Sliding the weight out to 250 mm raises it to 7.64 bar, which is why the weight is locked once set. The lever, weight and spindle stay in view; only the body, seat and valve are hatched.

Valves in section: a non-return valve and lever and spring safety valves opening as the pressure rises: interactive loads as you scroll

How is a spring-loaded safety valve set, and how far does it lift?

A compression screw squeezes the spring by x0 before any pressure acts, so the valve opens when p·A = k·x0. With the illustrative k = 40 N/mm and x0 = 25 mm on a Ø50 seat it opens at 5.09 bar; a lock nut then fixes the screw. In this simple static model the lift grows as (p·A − k·x0)/k, so the full 8 mm needs 6.72 bar. Real valves are shaped to pop fully open. The cut spring wires are drawn solid, as thin sections, with the back halves of the coils as lines.

What conventions does a valve assembly drawing follow?

The body is sectioned through the valve axis so the seat, disc and passages show. The seat ring is a separate part, often gun metal, so it can be renewed, and it is hatched in a different direction from the body. Spindles, studs, nuts, the lever and the weight lie along the cutting plane and stay in view (SP 46 clause 10.2.4.6). Each part gets a balloon and a parts-list row. An extreme position of a moving part, such as a fully lifted lever, may be drawn with long-dashed double-dotted narrow lines.

Predict, then check

The lever safety valve blows off at 6.11 bar with the 240 N weight at L = 200 mm. The weight is moved out to L = 250 mm. Now it blows off at about:

Worked examples

Weight for a lever safety valve · Seat Ø60 mm, short arm a = 50 mm, weight at L = 400 mm, blow-off required at 8 bar (0.8 MPa). Neglect the lever and valve weights.
  1. Seat area A = π × 30² = 2827.4 mm².
  2. Moments about the fulcrum: W·L = p·A·a, so W = 0.8 × 2827.4 × 50 / 400 = 282.7 N.
  3. Mass = 282.7 / 9.81 = 28.8 kg.

Answer: W ≈ 282.7 N, about a 28.8 kg cast-iron weight.

Set a spring-loaded safety valve · Seat Ø50 mm, required set pressure 7 bar, spring rate k = 45 N/mm, lift stop 5 mm (simple static model).
  1. A = π × 25² = 1963.5 mm²; force to hold at 7 bar = 0.7 × 1963.5 = 1374.4 N.
  2. Precompression x0 = 1374.4 / 45 = 30.54 mm: turn the compression screw down until the spring is that much shorter than free, then lock it.
  3. Full lift needs k(x0 + 5)/A = 45 × 35.54 / 1963.5 = 0.8146 MPa = 8.15 bar.

Answer: x0 = 30.54 mm; the valve is fully open at 8.15 bar, 1.15 bar above the set pressure.

Opening pressure of a non-return valve · Seat bore Ø40 mm, disc Ø46 mm (outlet pressure acts on all of it), disc weight 2 N, outlet pressure 4 bar.
  1. Seat area = π × 20² = 1256.6 mm²; disc area = π × 23² = 1661.9 mm².
  2. Closing force = 0.4 × 1661.9 + 2 = 666.8 N.
  3. Opening: p1 × 1256.6 > 666.8 N, so p1 > 0.5306 MPa = 5.31 bar.
  4. The disc is 1.322 times the seat area, which is why a narrow seat land keeps the opening pressure close to p2.

Answer: It opens at about 5.31 bar inlet pressure.

Chapter 19

Engine part assemblies: piston, connecting rod, crosshead, stuffing box and multi-plate clutch

Which syllabus covers thisAU ME3381 Part IIVTU BMEL305 Module 4SPPU not in syllabusMU not in syllabusKTU PCMEL307 Part A

What is a stuffing box, and how does tightening the gland seal it?

Where a piston rod leaves a cylinder, a stuffing box stops the steam or water leaking along the rod. Soft packing rings fill the space between rod and box; a neck bush closes the inner end; the gland presses the packing, drawn in by nuts on two studs. Each turn of an M12 nut moves the gland one pitch, 1.75 mm. In the interactive's illustrative box with 4 rings of 10 mm, 2 turns give 3.5 mm, a 8.75 % squeeze, and the packing grips the rod. The rod is an adjacent part, long-dashed double-dotted; the studs and nuts stay in view.

Engine part assemblies: stuffing box, connecting rod end, piston, crosshead and a multi-plate clutch engaging: interactive loads as you scroll

How is a marine-type big end drawn, and what are the liners for?

The big end clamps two brasses round the crank pin between the rod end and a cap, held by two bolts and nuts. Thin liners (shims) sit between rod and cap. When the brasses wear, a liner is taken out and the cap is drawn up by its thickness, restoring the running clearance; the interactive uses 1 mm liners. Because the bolt length is fixed, the nut simply runs further up the thread. The usual drawing is a half section: outside view on one side, section through the bolts on the other, the bolts in view and the liners solid black as thin sections.

Why is the gudgeon pin unhatched in the piston drawing, but the crosshead pin hatched?

The piston is sectioned through its axis and the gudgeon-pin axis, so the pin lies along the cutting plane and, like a shaft, is drawn in view; the ring grooves, bosses and skirt are hatched and the small rings are solid. The crosshead is sectioned on its sliding axis, which cuts the crosshead pin across its axis, and a pin cut across is hatched like any part. The guide bars must be at least the stroke plus the shoe length: in the interactive, r = 60 mm gives a 120 mm stroke and 240 mm bars.

How many friction surfaces does a multi-plate clutch have, and why does it matter?

Plates splined to the driving drum alternate with friction plates splined to the driven hub; springs squeeze the pack against the drum. With n1 discs on the driving side and n2 on the driven side there are n = n1 + n2 − 1 pairs of surfaces in contact. The interactive's 3 friction plates sit between 4 driving discs (drum face, two plates, pressure plate): 4 + 3 − 1 = 6. Torque grows with n: with μ = 0.3, a 2 kN spring force and a 50 mm mean radius it is 180 N·m. Sizing the plates is covered in the Design of Machine Elements book.

Predict, then check

A multi-plate clutch has 4 discs on the driving shaft and 3 on the driven shaft. How many pairs of friction surfaces does it have?

Worked examples

Packing squeeze in a stuffing box · Five packing rings of 12 mm square section; gland studs M16 (coarse pitch 2 mm); the nuts are given 3 turns after the gland touches the packing.
  1. Gland travel = 3 × 2 = 6 mm.
  2. Uncompressed packing length = 5 × 12 = 60 mm.
  3. Squeeze = 6 / 60 = 10 %.

Answer: The packing is squeezed 10 % (6 mm).

Torque of a multi-plate clutch · 5 discs on the driving shaft, 4 on the driven shaft; friction surfaces Ri = 40 mm, Ro = 80 mm; μ = 0.25; spring force W = 1.5 kN; uniform wear.
  1. n = n1 + n2 − 1 = 5 + 4 − 1 = 8.
  2. Uniform wear: mean radius Rm = (40 + 80)/2 = 60 mm.
  3. T = n μ W Rm = 8 × 0.25 × 1500 × 0.06 = 180 N·m.

Answer: 8 pairs of surfaces, T = 180 N·m.

Where is the crosshead at quarter turn, and how long are the guide bars? · Crank radius r = 75 mm, connecting rod l = 4.5r = 337.5 mm, crosshead shoe 100 mm long, 10 mm overrun at each end.
  1. x = r(1 − cos θ) + l − √(l² − r² sin² θ); at θ = 90°: 75 + 337.5 − √(337.5² − 75²) = 83.44 mm from inner dead centre.
  2. That is more than half the 150 mm stroke because the rod is inclined.
  3. Guide bars ≥ stroke + shoe + overrun = 150 + 100 + 20 = 270 mm.

Answer: x = 83.44 mm at 90°; guide bars at least 270 mm long.

Chapter 20

Machine-tool and pump assemblies: screw jack, machine vice, tailstock, lathe chuck, gear and vane pumps

Which syllabus covers thisAU ME3381 Part IIVTU BMEL305 Module 4SPPU not in syllabusMU not in syllabusKTU PCMEL307 Part B

How does a screw jack work, and how is it drawn?

A tommy bar through the screw's head turns the square-threaded screw in a gun-metal nut fixed in the cast-iron body, so the screw rises one lead per turn. The cup on top is held by a washer screw but does not turn with the screw, so the load does not twist. In the interactive's illustrative jack, 1.5 turns of an 8 mm pitch raise the cup 12 mm, and 5 turns of a 12 mm pitch raise it 60 mm. In section the body, nut and cup are hatched; the screw, tommy bar and washer screw stay in view, the thread drawn by the ISO 6410 convention.

Machine-tool assemblies: screw jack, machine vice, tailstock, lathe chuck and gear and vane pumps in motion: interactive loads as you scroll

What moves in a machine vice and a tailstock when the handle turns?

In the machine vice the screw is held endwise in the movable jaw and turns in a thread in the body's end wall, so the jaw advances one pitch per turn: 6 turns of a 4 mm pitch close it 24 mm. In the tailstock the handwheel's screw is held in the end cover, and a nut fixed in the quill's tail drives the quill and its 60° dead centre out one pitch per turn. Hardened jaw plates and the Morse-taper centre are separate parts with their own parts-list rows.

How do the three jaws of a self-centring chuck move together?

The chuck key turns a bevel pinion, the pinion turns the scroll, and the scroll's spiral engages teeth on the back of all three jaws, so they move in or out together and centre the work. With the interactive's illustrative 1:4 pinion and an 8 mm scroll pitch, one key turn moves each jaw 2 mm. Because the jaws sit 120° apart on one spiral, their teeth are cut 2.67 mm (one third of the pitch) apart, which is why chuck jaws are numbered and must go in in order.

How much oil does a gear pump deliver per revolution?

Two meshing gears carry oil round the outside of the casing in their tooth spaces from inlet to outlet; at the mesh the teeth squeeze it out. A common approximation uses the outside and inside (root) diameters of the teeth and the width b. The interactive's illustrative pump (m = 6, z = 12, b = 30 mm) has Do = 84 mm, Di = 57 mm and V ≈ 89.7 cm³ per revolution, about 129.2 L/min at 1440 rpm before leakage. In a vane pump the delivery depends on the rotor's eccentricity: at e = 0 no oil is pumped.

Predict, then check

A screw jack has a two-start square thread of 6 mm pitch. How far does the cup rise in 5 turns of the tommy bar?

Worked examples

Turns to raise a screw jack · A screw jack with a 10 mm pitch square thread must raise a load 85 mm.
  1. Single start: lead = 10 mm, turns = 85 / 10 = 8.5.
  2. With a two-start thread of the same pitch: lead = 20 mm, turns = 85 / 20 = 4.25.
  3. The two-start screw is quicker but needs more effort per turn; the effort and the thread strength are worked out in the Design of Machine Elements book.

Answer: 8.5 turns (single start) or 4.25 turns (two-start).

Delivery of a gear pump · Two equal spur gears, module 4 mm, 14 teeth, 25 mm wide; 1450 rpm; volumetric efficiency 90 %.
  1. Do = m(z + 2) = 4 × 16 = 64 mm; Di (root) = m(z − 2.5) = 4 × 11.5 = 46 mm.
  2. V = (π/4)(64² − 46²) × 25 = 38877 mm³ = 38.88 cm³ per revolution.
  3. Theoretical flow = 38.88 × 1450 / 1000 = 56.37 L/min; actual ≈ 0.9 × 56.37 = 50.73 L/min.

Answer: About 38.9 cm³/rev, 50.7 L/min delivered.

Key turns to close a three-jaw chuck · Jaws open to Ø140 mm, work Ø50 mm; pinion to scroll 1:4, scroll pitch 8 mm (illustrative).
  1. Radial travel of each jaw = (140 − 50)/2 = 45 mm.
  2. Jaw travel per key turn = 8 / 4 = 2 mm.
  3. Key turns = 45 / 2 = 22.5.

Answer: 22.5 turns of the key.

Chapter 21

Limits and tolerances on drawings: three ways to write a limit, ISO 286 table values and general tolerances

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 1SPPU not in syllabusMU 2403116 Module IIKTU not in syllabus

In how many ways can a drawing state the limits of one size?

Three, and they mean exactly the same thing. As a tolerance class: Ø40 H7. As limit deviations from the basic size: Ø40 with +0.025 above and 0 below (a zero deviation is written as a plain 0, a symmetric one once with ±). As limits of size: 40.025 over 40.000, the upper limit always in the upper position. A Ø40 g6 pin reads −0.009 / −0.025, that is 39.991 / 39.975. SP 46 also allows the class with the values added in brackets. Switch between hole and shaft in the interactive and read all three for one size.

One size written three ways: tolerance class, deviations and limits from the ISO 286 tables, and general tolerances: interactive loads as you scroll

Where do the deviation numbers come from, and why quote the table?

The grade number (IT7) fixes the width of the zone and the letter fixes its position. ISO 286-2 tabulates both for each diameter step: Ø40 sits in the 30-50 mm step, where IT7 is 25 µm. The Machining & Metrology book derives these from formulae, and the formula gives IT7 = 16i = 24.98 µm here. The table is that value rounded, and a drawing, a gauge maker and a CMM program all read the table, so quote it. Watch the split steps: u6 at Ø40 uses the 30-40 mm row (+0.076 / +0.060).

What are unilateral and bilateral tolerances?

A unilateral zone lies wholly on one side of the basic size: H7 at Ø40 is +0.025 / 0, h6 is 0 / −0.016, and k6 (+0.018 / +0.002) is unilateral too, just lifted off the line. A bilateral zone straddles it: js6 at Ø40 is ±0.008, and K7 is +0.007 / −0.018. Holes are usually given unilateral H tolerances because a reamer or plug gauge then starts from the basic size. Bilateral tolerances suit centre distances and positions, where a nominal value with equal play either way is what the function needs.

What tolerance does a dimension without one have?

The general tolerance written near the title block, such as ISO 2768-m (IS 2102 Part 1 in India is the same standard). Class m allows ±0.1 mm up to 6 mm, ±0.2 over 6 to 30, ±0.3 over 30 to 120 and ±0.5 over 120 to 400. The bush in the interactive is 60 long, so it may be made 60 ±0.3; in class f that tightens to ±0.15, in class v it opens to ±1.5. It does not apply to auxiliary dimensions in brackets or to theoretically exact dimensions in frames. Tolerance individually only what the function needs.

Predict, then check

A pin is drawn Ø25 g6, and g6 at Ø25 is −0.007 / −0.020. Which sizes pass?

Worked examples

One bore written three ways · A bush bore Ø40 H7 (ISO 286-2, 30-50 mm step)
  1. Tolerance class: Ø40 H7
  2. Table: H7 at 30-50 mm = +25 / 0 µm, so the deviations are +0.025 / 0
  3. Limits: 40 + 0.025 = 40.025, 40 + 0 = 40.000
  4. Tolerance = 40.025 − 40.000 = 0.025 mm = IT7

Answer: Ø40 H7 = Ø40 +0.025/0 = 40.025/40.000

A bilateral pin and an under-size bore · A Ø25 js6 pin and a Ø60 P7 housing bore (table values)
  1. js6 at 18-30 mm: IT6 = 13 µm split equally, ±6.5 µm = ±0.0065 mm
  2. Pin limits: 25.0065 / 24.9935
  3. P7 at 50-80 mm: −21 / −51 µm, both below zero
  4. Bore limits: 60 − 0.021 = 59.979, 60 − 0.051 = 59.949; tolerance 30 µm = IT7

Answer: Pin 24.9935 to 25.0065; bore 59.949 to 59.979

Reading general tolerances on a bracket · An illustrative bracket drawing marked ISO 2768-m with untoleranced sizes 4, 25, 80 and 250 mm
  1. 4 mm is in 3-6: ±0.1
  2. 25 mm is in 6-30: ±0.2
  3. 80 mm is in 30-120: ±0.3, so 79.7 to 80.3
  4. 250 mm is in 120-400: ±0.5
  5. Had the note said ISO 2768-c: ±0.3, ±0.5, ±0.8, ±1.2

Answer: ±0.1, ±0.2, ±0.3 and ±0.5 mm (class m)

Chapter 22

Fits on assembly drawings: hole basis, shaft basis and choosing a fit for the job

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 1SPPU not in syllabusMU 2403116 Module IIKTU not in syllabus

How do you tell a clearance, transition or interference fit from the limits?

Take the extreme pairs. The largest hole with the smallest shaft gives the maximum clearance, ES − ei; the smallest hole with the largest shaft gives the minimum clearance, EI − es. If even the minimum is zero or more, it is a clearance fit; if even the maximum is zero or less, interference; otherwise transition. Ø40 H7/g6: hole +25 / 0, shaft −9 / −25 µm, so clearance 9 to 50 µm. With an H hole, SP 46 notes shafts a to g give clearance, js to n transition and p to u interference.

Which fit suits which job?

Start from the ISO preferred fits. At Ø40: H11/c11 loose running (120 to 440 µm clearance); H9/d9 free running; H8/f7 close running (25 to 89); H7/g6 sliding (9 to 50); H7/h6 locational clearance; H7/k6 and H7/n6 transition for accurate location (k6: up to 23 µm clearance or 18 µm interference); H7/p6 locational interference; H7/s6 medium drive (18 to 59 µm interference); H7/u6 force or shrink fit. Pick a job in the interactive and read the zones.

Choosing a fit for the job: hole basis and shaft basis, the callout on the assembly and the clearance or interference: interactive loads as you scroll

Why is hole basis the usual choice, and when is shaft basis used?

A hole is harder to make than a shaft: drills, reamers and broaches come in fixed sizes, and plug gauges too. So the hole is kept at H (lower deviation 0) and the shaft letter is varied: hole basis, the system SP 46 calls the extensively used one. Shaft basis (h shaft) pays when several parts with different fits go on one length of drawn bar that is not machined. ISO builds the two so that preferred pairs match: G7/h6 at Ø40 gives 9 to 50 µm, exactly as H7/g6 does.

How is a fit written on an assembly drawing and on the part drawings?

On the assembly the basic size appears once, then the hole class before (or above) the shaft class: Ø40 H7/g6. Each part drawing carries only its own half: the housing Ø40 H7, the shaft Ø40 g6, because each is made and inspected separately, perhaps by different suppliers. Values may be added in brackets, Ø40 H7 (+0.025/0). The hole usually gets the coarser grade, one step above the shaft, as in H8/f7, because it is the harder member to machine. The strength of a press fit is a Design of Machine Elements question; the drawing only fixes the limits.

Predict, then check

At Ø40, H7 is +25 / 0 µm and k6 is +18 / +2 µm. What kind of fit is H7/k6?

Worked examples

Clearances of a close running fit · Ø40 H8/f7 (ISO 286-2, 30-50 mm step)
  1. H8 = +39 / 0 µm; f7 = −25 / −50 µm
  2. Maximum clearance = 39 − (−50) = 89 µm
  3. Minimum clearance = 0 − (−25) = 25 µm
  4. Both positive: a clearance fit, the hole one grade coarser than the shaft

Answer: Clearance 25 to 89 µm (0.025 to 0.089 mm)

A medium drive fit, both systems · Ø25 H7/s6 and its shaft-basis twin S7/h6 (18-30 mm step)
  1. H7 = +21 / 0; s6 = +48 / +35 µm
  2. Max clearance = 21 − 35 = −14 µm, so at least 14 µm interference
  3. Min clearance = 0 − 48 = −48 µm, so at most 48 µm interference
  4. S7 = −27 / −48; h6 = 0 / −13: −27 − (−13) = −14, −48 − 0 = −48

Answer: Interference 14 to 48 µm in either system

Choosing between two fits for a pulley · An illustrative pulley on a Ø60 shaft: it must locate accurately and still come off for service
  1. H7/h6 at 50-80 mm: hole +30 / 0, shaft 0 / −19: clearance 0 to 49 µm, slides off but the bore may be up to 49 µm larger than the shaft
  2. H7/k6: shaft +21 / +2: from 28 µm clearance to 21 µm interference
  3. k6 centres the pulley better and needs only light pressing or a mallet; a key carries the torque in both cases
  4. Write Ø60 H7/k6 on the assembly, Ø60 H7 on the pulley drawing and Ø60 k6 on the shaft drawing

Answer: H7/k6 (transition, +28 to −21 µm)

Chapter 23

Surface texture: Ra and roughness grades, the surface symbol, lay and machining allowance

Which syllabus covers thisAU not in syllabusVTU BMEL305 Module 1SPPU not in syllabusMU 2403116 Module IIIKTU not in syllabus

What do Ra and Rz measure on a surface?

Draw the mean line through the measured profile. Ra is the average height of the profile above or below it, ignoring sign: the shaded area divided by the length. Rz takes each of the five sampling lengths, finds its highest peak to lowest valley, and averages the five. For a sine profile of amplitude 5 µm, Ra = 2A/π = 3.18 µm and Rz = 10 µm, a ratio of π; for a sharp triangular profile the ratio is 4. So Ra 3.2 and Rz 12.5 can describe similar surfaces, but never swap one for the other on a drawing.

How is the surface texture symbol built?

Two lines of unequal length at about 60° to the surface make the basic symbol. A bar across the V means material must be removed (machined); a circle in the V means it must not be (leave it as cast, forged or rolled). The complete symbol adds a horizontal line: the parameter and value, such as Ra 3.2, go below it (position a), the process such as turned above it (c), the lay symbol beside the V (d) and the machining allowance in mm to its left (e). A single value is an upper limit with the 16 % rule by default, measured over five sampling lengths. Build one in the interactive.

Surface texture: a measured profile, its Ra and Rz, the roughness grade and the surface symbol with lay: interactive loads as you scroll

What are N grades, and which process gives which finish?

ISO 1302:1992 numbered the preferred Ra values N1 = 0.025 µm up to N12 = 50 µm, each grade about double the last: N7 = 1.6, N8 = 3.2, N9 = 6.3. Later editions dropped the N numbers, but many Indian drawings and shop floors still use them. As rules of thumb: casting N10-N12 (12.5 to 50 µm), turning and milling N7-N9 (1.6 to 6.3), grinding N5-N6 (0.4 to 0.8), lapping and honing N4 and finer. Each finer grade costs another operation, so ask only for what the surface needs.

What do the lay symbols and the machining allowance tell the shop?

Lay is the direction of the tool marks. The symbol is read against the view it is drawn in: = parallel to the plane of projection, ⊥ perpendicular to it, X crossed in two oblique directions, M multi-directional, C roughly circular about the centre, R radial, P particulate with no direction. The machining allowance at position e appears on casting and forging drawings: a block finished 40 mm thick with 3 mm allowance on each machined face is cast 46 mm thick. SP 46 places the requirement once per surface, on the view that dimensions it.

Predict, then check

A surface symbol has a circle inside the V and Ra 25 under its line. What does it ask for?

Worked examples

Ra and Rz of a sine profile · A (model) profile z = 5 sin(2πx/λ) µm, ten waves over the evaluation length
  1. Ra = (1/l)∫|z| dx = 2A/π = 2 × 5/π = 3.183 µm (sampled: 3.183)
  2. Each sampling length holds two whole waves: peak +5, valley −5, so Rz = 10 µm
  3. Rz/Ra = 3.142 = π for a sine; a triangular profile gives 4
  4. Ra 3.2 µm (N8) on a sine needs A = 3.2 × π/2 = 5.03 µm

Answer: Ra = 3.18 µm, Rz = 10 µm

Reading a complete symbol · A V with a bar, 'turned' above the line, 'Ra 1.6' below it, ⊥ beside the V and 2 at its left
  1. Bar: material must be removed
  2. Above the line (c): the process, turning
  3. Below the line (a): Ra no more than 1.6 µm, which is N7, 16 % rule, five sampling lengths
  4. ⊥ (d): the feed marks run perpendicular to the plane of projection of this view
  5. 2 (e): leave 2 mm of machining allowance on this face

Answer: Turn this face, leaving 2 mm stock on the blank, to Ra 1.6 µm (N7) with lay ⊥

Choosing grades for a bush · An illustrative cast-iron bush: the bore runs on a shaft, the outside is pressed into a housing, the end faces are just clean-up faces
  1. Bore: ground, N6 = Ra 0.8 µm (grinding typically N5-N6)
  2. Outside diameter for the press fit: fine turned or ground, N7 = Ra 1.6 µm
  3. End faces: turned, N8 = Ra 3.2 µm
  4. Unmachined boss: as cast, no removal, N11 = Ra 25 µm

Answer: Ra 0.8 / 1.6 / 3.2 µm on the machined faces; the cast boss carries the circle symbol

Chapter 24

GD&T: why it beats plus-minus tolerancing, the geometric symbols and the feature control frame

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 1SPPU 202042 Unit VIMU 2403116 Modules IV, VKTU PCMEL307 Part A

What is wrong with plus-minus tolerances on the position of a hole?

Writing 40 ± 0.1 and 25 ± 0.1 gives the hole centre a square zone 0.2 mm wide, and it never says which surfaces to measure from. The square is also unfair: a centre at a corner is 0.141 mm from the true position and passes, but a centre 0.13 mm away straight along x fails. Geometric dimensioning and tolerancing (GD&T) gives a round zone, here Ø0.283 through the square's corners, which has 57 % more area, and it names the datums the measurement starts from.

What are the 14 geometric characteristics?

They fall into five groups. Form (4): straightness, flatness, circularity, cylindricity; they control one feature on its own and never take a datum. Profile (2): profile of a line and of a surface, with or without datums. Orientation (3): parallelism, perpendicularity, angularity, always to a datum. Location (3): position, concentricity, symmetry. Run-out (2): circular and total run-out, always about a datum axis. Each symbol is drawn with lines, not typed. Pick any of them in the builder: it attaches the frame to a feature of a small part and reads it aloud.

The feature control frame: geometric symbols, tolerance zone, material modifiers, datums and a plain-English reading: interactive loads as you scroll

How do you read a feature control frame?

Read left to right. The first box is the symbol. The second box holds the tolerance: a Ø in front means the zone is a cylinder, and a circled M or L after it means the tolerance applies at maximum or least material condition. The remaining boxes name the datums in order of precedence: primary, secondary, tertiary, not alphabetical order. A leader arrow on a surface tolerances the surface itself. An arrow in line with a dimension line tolerances the axis or median plane of that size. So the position frame Ø0.1 at MMC to A, B, C means the hole axis must lie inside a Ø0.1 cylinder at the true position, located from A, then B, then C.

Do ISO and ASME drawings mean the same thing?

Mostly, but read the title block. This book follows ISO 1101, which India adopts as IS 8000 (Part 1). Under ISO 8015 every tolerance applies on its own, so a size tolerance does not control form: you add a form tolerance or the envelope symbol, a circled E. ASME Y14.5 assumes the envelope by default (Rule #1): perfect form at maximum material size. ASME Y14.5-2018 also dropped concentricity and symmetry, which ISO keeps. Datum letters skip I, O and Q in ASME. A drawing for a US customer can mean something different from the same frame on an ISO drawing.

Predict, then check

Which of these frames is not valid?

Worked examples

Read a position frame on a hole · A hole Ø10.0 to Ø10.1 with the frame: position, Ø0.1, circled M, datums A, B, C
  1. MMC of a hole = its smallest size = 10 mm; LMC = 10.1 mm
  2. At MMC the axis must lie in a cylinder of Ø0.1 at the basic (exact) dimensions from A, B, C
  3. At an actual size of 10.06 the zone grows by 10.06 − 10.0 = 0.06: Ø0.16
  4. At LMC (10.1) the zone is Ø0.2
  5. The gauge pin for this hole is Ø(10.0 − 0.1) = Ø9.9, fixed at the true position

Answer: Zone Ø0.1 at MMC up to Ø0.2 at LMC, gauge pin Ø9.9

Plus-minus square against a round position zone · A hole drawn 40 ± 0.1 and 25 ± 0.1 from two edges. Hole P is off by (0.09, 0.09) mm, hole Q by (0.13, 0) mm
  1. The ± tolerance is a square of side 0.2. P: both offsets ≤ 0.1, so P passes. Q: 0.13 > 0.1, so Q fails
  2. Radial offset of P = √(0.09² + 0.09²) = 0.1273 mm, so its position deviation is Ø0.255
  3. Q: Ø = 2 × 0.13 = 0.26
  4. The round zone through the square's corners is Ø(2 × 0.1 × √2) = Ø0.283: both P and Q fit
  5. Areas: square 0.04 mm², circle π × 0.1414² = 0.0628 mm², 57 % more

Answer: With ± tolerances Q is rejected though it is closer to true position than the corners the square accepts; Ø0.283 accepts both

Check four frames · (a) flatness 0.05 | A; (b) perpendicularity 0.05 with no datum; (c) circular run-out Ø0.03 | A; (d) position Ø0.1 circled M | A | B | C
  1. (a) Flatness is form: no datum allowed, so it is invalid (a form tolerance takes no datum)
  2. (b) Orientation needs a datum to be perpendicular to, so it is invalid (perpendicularity needs a datum)
  3. (c) Run-out is read as an indicator movement, not a cylinder, so the Ø is wrong (no Ø with circular run-out)
  4. (d) Position of a hole: Ø zone, MMC allowed (a hole is a feature of size), datums A, B, C. Valid

Answer: Only (d) is a valid frame

Chapter 25

Datums: degrees of freedom, the 3-2-1 principle, datum features and datum targets

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 1SPPU not in syllabusMU 2403116 Module VKTU PCMEL307 Part A

What is the 3-2-1 principle?

A free part has 6 degrees of freedom: 3 moves and 3 turns. Push it onto the primary datum plane A on 3 points and it loses 3 (the drop and the two tilts). Slide it against the secondary B on 2 points: 2 more (one move and the spin). Touch the tertiary C on 1 point: the last one. 3 + 2 + 1 = 6, and the part is located. In the interactive the three A pins span a triangle of 1140 mm², 28.5 % of the 4000 mm² bottom face. Spread the points as far apart as the face allows, so that small bumps tilt the part as little as possible.

Datums: locating a part on three planes with 3, 2 and 1 points of contact, and datum targets: interactive loads as you scroll

What is the difference between a datum feature and a datum?

The datum feature is the real, imperfect surface on the part: the face, hole or shaft marked with the datum feature symbol (a filled triangle joined to a framed capital letter). The datum is the theoretically exact plane, axis or point that a perfect gauge surface, the datum simulator, sets up when the part rests on it: a surface plate, an angle plate, a mandrel. Put the triangle on the surface or its extension line and the datum is that plane. Put it in line with a size dimension and the datum is the axis or centre plane of that feature.

Why does the order of datums in a frame matter?

The order in the frame, primary then secondary then tertiary, is the order the part is set up in, and it changes the answer. With A | B | C the part sits first on A with 3 points, so A wins any rocking and B only gets the 2 freedoms A left. Swap to B | A | C and the part is first pushed square to B. On a part whose faces are not quite square, the two setups put the hole in measurably different places. Lower-precedence datums only control the freedoms the higher ones left. The letters are only names: A need not be primary.

When are datum targets used?

A rough casting or forging face is too uneven to sit on as a whole, so the drawing names a few points, lines or small areas instead. A point target is marked X; a line target is a thin phantom line; an area target is a hatched patch with its size. Each target gets a symbol: a circle split across the middle, with the letter and number (A1, A2, A3) in the lower half and the area size in the upper half. For 3-2-1 use A1 to A3, B1 and B2 (or one line target), and C1. The machinist's fixture puts its pins exactly there.

Predict, then check

In the interactive, the three primary pins are put in a straight line. After the 2 secondary pins and the 1 tertiary pin are added, how many degrees of freedom are left?

Worked examples

Plane, hole and slot · A flange plate located by its back face A, a central bore B (axis square to A) and a slot C
  1. A, a plane: the plate sits on it and loses the drop and the two tilts: 3 DOF
  2. B, the bore on a pin square to A: the plate can no longer slide in x or y: 2 DOF
  3. C, the slot on a second pin: it stops the turn about the bore: 1 DOF
  4. Total 3 + 2 + 1 = 6, so the frame A | B | C locates the plate completely

Answer: 3 + 2 + 1 = 6 degrees of freedom removed

A shaft: axis, shoulder, keyway · A stepped shaft held by its main diameter (datum A, an axis), its shoulder face (B) and its keyway (C)
  1. A cylinder in a V-block touches along two lines: four contact points; their constraint rows have rank 4. An axis removes 4 (two moves, two tilts)
  2. The shoulder against a stop removes the axial slide: rank 5
  3. Without C the shaft can still turn about its axis: 6 − 5 = 1 DOF left. That is fine for a run-out check, which turns it anyway
  4. A key in the keyway stops the turn: rank 6, 0 left. Needed only if a feature must be clocked to the keyway

Answer: Axis A removes 4, shoulder B removes 1, keyway C removes 1

Why three pins must not be in a line · Primary pins at (12, 25), (40, 25), (68, 25) mm under an 80 × 50 block
  1. Triangle area of the three pins = 0: they are collinear (all on y = 25)
  2. Their constraint rows have rank 2, not 3: the block can still turn about the line y = 25
  3. Add the 2 B pins and the C pin: rank 5, so 1 DOF is left and the block rocks
  4. Move one pin to (40, 44) and the others to (10, 6), (70, 6): area 1140 mm², rank 3, then 0 DOF after all six

Answer: Collinear pins leave 1 DOF; a spread triangle leaves 0

Chapter 26

Form and orientation tolerances: flatness, straightness, circularity, cylindricity, parallelism, perpendicularity

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 1SPPU not in syllabusMU 2403116 Module VIKTU PCMEL307 Part A

What zone does each form tolerance define?

Straightness: two parallel lines t apart (or, with Ø on a size, a cylinder for the axis). Flatness: two parallel planes t apart. Circularity: two concentric circles t apart radially, in every cross-section. Cylindricity: two coaxial cylinders t apart, so it covers roundness, straightness and taper at once. Form zones have no datum: they may sit at any position and tilt, and the feature passes if some such zone holds every point. Under ISO 8015 a size tolerance does not limit form, so a face that must be flat needs its own flatness tolerance.

How is the measured form error worked out from points?

By the minimum zone: the narrowest pair of lines, planes, circles or cylinders that holds every measured point. That is what the tolerance definition asks for. CMM software often fits least squares instead, which never gives a smaller value and can reject good parts. In Example 1 the minimum zone is 10 µm against 11.2 µm by least squares. In the interactive, change the form error and tolerance and the zone, its width and pass or fail update. At the default parallelism setting the face is 0.038 mm out of parallel but only 0.028 mm out of straight.

Form and orientation tolerances: a measured feature inside its tolerance zone, pass or fail: interactive loads as you scroll

How do orientation tolerances differ from form?

Parallelism, perpendicularity and angularity use the same zone shapes, but the datum fixes the zone's direction: two planes parallel to A, square to A, or at the basic angle to A. The zone can still move but cannot tilt, so a face that is perfectly flat but leans fails. Because the zone is two planes, an orientation tolerance also limits flatness. A flatness tolerance on the same face only makes sense if it is smaller. The usual order is form ≤ orientation ≤ location.

How are these checked in a shop?

Parallelism: put datum face A on a surface plate and sweep a dial indicator over the top face; the full indicator movement is the parallelism error, because the plate fixes the direction. That reading is not flatness: a tilted but flat plate reads high. For flatness the part is levelled first, or the points are fitted with a minimum zone. Perpendicularity: the part sits on A against an angle plate or square and the face is swept vertically. Circularity: a roundness instrument turns the part on a precise spindle and plots the radius. The Machining and Metrology book covers the instruments.

Predict, then check

A face is perfectly flat but rises 0.04 mm across its length relative to the base A. It has flatness 0.02 and parallelism 0.03 to A. What happens?

Worked examples

Straightness from five readings · A 100 mm edge read every 25 mm on a surface plate: 8, 0, 12, 4, 10 µm
  1. End-point line through the first and last readings (8 and 10 µm): deviations range over 11.5 µm
  2. Least-squares line: residuals range over 11.2 µm
  3. Minimum zone: the lower line rests on the two low points (25, 0) and (75, 4), slope 0.08 µm/mm
  4. Highest points above it: 8 − (−2) = 10 µm at 0 and 12 − 2 = 10 µm at 50: zone 10 µm
  5. Against a straightness tolerance of 0.011 mm: minimum zone passes, the other two methods would fail it

Answer: Straightness error = 10 µm (minimum zone), not 11.5 or 11.2 µm

Flat but not parallel · A 100 × 60 mm face measured with datum A on a surface plate: corners 0, 30, 36, 6 µm, centre 21 µm. Flatness 0.01, parallelism 0.03 to A
  1. Parallelism: the zone is held parallel to A, so it is the full range: 36 − 0 = 36 µm
  2. The corners lie on one tilted plane (rising 30 µm in x and 6 µm in y); at the centre that plane is at 18 µm
  3. The centre is 21 − 18 = 3 µm above it, so the minimum zone (free to tilt) is 3 µm
  4. Flatness 0.003 ≤ 0.01: passes. Parallelism 0.036 > 0.03: fails

Answer: Flatness 3 µm (pass), parallelism 36 µm (fail): the face is flat but tilted

Roundness on a spindle · Radial deviations at 45° steps from a roundness instrument (µm): 0, 6, 10, 4, −2, −6, −8, −3
  1. About the spindle axis the range is 18 µm, but that includes the part being off-centre
  2. Least-squares centre (for equal steps): a = (2/8)Σr cos θ = 1.38 µm, b = (2/8)Σr sin θ = 7.86 µm
  3. Residuals about that centre range over 3.53 µm (least-squares circles)
  4. Minimum zone (centre chosen to make the ring narrowest): 2.97 µm

Answer: Circularity ≈ 3 µm by minimum zone (3.5 µm by least squares; 18 µm uncorrected)

Chapter 27

Position tolerance, MMC and LMC: bonus tolerance and virtual condition

Which syllabus covers thisAU ME3381 Part IVTU BMEL305 Module 1SPPU not in syllabusMU 2403116 Modules V, VIKTU PCMEL307 Part A

How is a position tolerance checked?

The true position is set by basic dimensions, the boxed numbers with no tolerance of their own, measured from the datums in the frame. Measure where the hole axis really is, as offsets dx and dy from true position. The position deviation is the diameter of the circle centred on true position that just reaches the axis: 2√(dx² + dy²). The hole passes if that diameter is within the tolerance in the frame (plus any bonus). An axis 0.003 off in x and 0.002 off in y has a deviation of about Ø0.0072.

What is bonus tolerance?

A circled M means the position tolerance holds when the hole is at maximum material condition: its smallest size, Ø12 here. A bigger hole leaves more room for the bolt, so the hole may wander further: bonus = actual size − MMC size. With position Ø0.2 at MMC, a hole made at Ø12.1 gets Ø0.3 and one at Ø12.2 gets Ø0.4. In the interactive the default hole (Ø12.10, axis off by 0.08 and 0.11) deviates Ø0.272: it would fail without the modifier (RFS) but passes at MMC.

Position at MMC: bonus tolerance as the hole grows, the virtual condition and the square versus round zone: interactive loads as you scroll

What is the virtual condition, and how does a functional gauge use it?

The virtual condition is the worst-case boundary the mating part must clear: for a hole, MMC size − position tolerance = 12 − 0.2 = Ø11.8. A functional gauge is a pin of exactly that size, fixed at the true position, located from the same datums. If the pin enters, the hole's size and position are acceptable together: the pass or fail matches the bonus calculation. For a pin, the virtual condition is MMC + tolerance. Gauging is quick on the shop floor, which is why the circled M is used wherever parts only need to assemble.

When is LMC or RFS used instead of MMC?

Least material condition (circled L) protects the material: the wall between a hole and an edge, or the stock left for machining. Bonus = LMC − actual size, so the tolerance grows as the hole gets smaller, and the hole must stay inside a boundary Ø12.4 (LMC + tolerance). Regardless of feature size (RFS, no modifier) gives no bonus: Ø0.2 at every size. Use it for a hole that locates a shaft or pin, where location matters at any size. Both need a measurement of the axis, not a fixed gauge.

Predict, then check

A hole drawn Ø12.0 to Ø12.2 has position Ø0.2 at MMC. It is made at Ø12.15. How large is its position zone?

Worked examples

Pass or fail at MMC · Hole Ø12.0 to Ø12.2, position Ø0.2 at MMC to A, B, C. Measured: Ø12.13, axis off by dx = 0.12, dy = −0.09 mm
  1. Radial offset = √(0.12² + 0.09²) = 0.15 mm, so the deviation = 2 × 0.15 = Ø0.3
  2. Bonus = 12.13 − 12.0 = 0.13; zone = 0.2 + 0.13 = Ø0.33
  3. Ø0.3 ≤ Ø0.33: passes
  4. Without the circled M (RFS) the zone stays Ø0.2 and Ø0.3 fails

Answer: Pass at MMC (Ø0.3 within Ø0.33); it would fail at RFS

The gauge pin agrees · Same hole callout; a part with the hole at Ø12.06 and a position deviation of Ø0.27
  1. Zone = 0.2 + (12.06 − 12.0) = Ø0.26; deviation Ø0.27 > Ø0.26: fail by calculation
  2. Gauge pin = virtual condition = 12.0 − 0.2 = Ø11.8, at true position
  3. The pin's far edge is 0.27/2 + 11.8/2 = 6.035 mm from the hole centre; the hole radius is 6.03 mm
  4. 6.035 > 6.03: the pin does not enter. Both methods reject the part

Answer: Rejected: deviation Ø0.27 exceeds Ø0.26, and the Ø11.8 pin will not go in

Holes for a floating bolt · Two plates bolted together with M10 bolts (shank Ø10) through clearance holes of Ø11 at MMC in both plates
  1. The bolt is free in both holes, so each hole only has to clear a Ø10 shank at its true position
  2. Each hole's virtual condition (MMC − position tolerance T) must be at least the bolt size: 11 − T ≥ 10
  3. So T = 11 − 10 = 1 mm, as position Ø1 at MMC on each plate
  4. Holes made bigger than Ø11 get bonus on top; a tighter T only costs more machining

Answer: Position Ø1 at MMC on each plate (derived from the virtual condition H − T ≥ F)

Chapter 28

CAD drafting and modelling: layers, blocks, arrays, constraints, features, assembly mates and drawing views

Which syllabus covers thisAU ME3381 Part IIVTU BMEL305 Modules 1-4SPPU 202042 Units I, III, VIMU not in syllabusKTU PCMEL307 Part B

What does a fully defined sketch mean?

Every free point in a 2D sketch has 2 degrees of freedom, so the 6-point profile of the flanged bush starts with 12. Six horizontal and vertical relations remove 6 (6 left), putting the back face on the datum removes 1 (5 left) and five dimensions, three diameters, the flange thickness and the length, remove the rest: DOF 0, fully defined, and many CAD systems turn the lines from blue to black or white. One more dimension would be redundant and the software flags it as over-defined. Step through it in the interactive.

Parametric CAD: the feature tree, constraints and degrees of freedom, patterns, layers and drawing views that update: interactive loads as you scroll

How does a feature-based, parametric model build and rebuild a part?

The model is a history: Sketch1 is revolved into a solid, Hole1 adds one Ø9 hole, CirPattern1 copies it round the axis and Chamfer1 breaks the bore edge. Each feature stores its inputs, so changing one parameter replays the tree. Tie the PCD to the hub and the rim, PCD = (hub Ø + flange Ø)/2, and raising the flange from Ø90 to Ø110 moves the holes from PCD 68 to PCD 78, with 6.5 and then 11.5 mm of metal outside each hole. Capturing design intent like this is what separates a model from a picture.

Why do layers, blocks and arrays matter in 2D drafting?

Layers group lines by type: outlines, centre lines, hidden lines, hatching and dimensions each sit on their own layer with their own line type and colour, so a whole class can be switched off, plotted thin or locked. A block draws a repeated feature once, here a hole circle with its centre mark, and inserts it wherever needed; edit the block and every copy changes. A polar array places n copies at 360°/n about a centre: 6 holes sit at 60° steps, 8 at 45°. Together they keep a drawing consistent and quick to edit.

How do assembly mates and drawing views come from the 3D model?

A loose part in an assembly has 6 degrees of freedom. A concentric mate between a shaft and a bore removes 4 (two shifts, two tilts); a coincident mate between the bush's flange face and the housing face removes 3, two of them the same tilts, so together they leave 1: rotation about the axis, exactly what a bearing should allow. Drawing views are then projected from the model, sections and all, and stay associative: change the model and the views, dimensions and the parts list update. You still choose the views, sections, fits and tolerances.

Predict, then check

A sketch rectangle has 4 corner points and a horizontal or vertical relation on each of its 4 sides, and no dimensions. How many degrees of freedom are left?

Worked examples

Counting DOF in the bush sketch · The closed 6-point half profile of the flanged bush (bore 30, hub Ø45, flange Ø90 × 12, length 50)
  1. Free points: 6 × 2 = 12 DOF
  2. 3 horizontal + 3 vertical relations: 12 − 6 = 6
  3. Back face on the datum plane: 6 − 1 = 5
  4. Dimensions Ø30, Ø45, Ø90, 12 and 50: 5 − 5 = 0
  5. Revolve about the sketch centre line to get the solid

Answer: Fully defined with 6 relations, 1 fix and 5 dimensions (DOF 0)

Rebuilding after a parameter change · Flange Ø changed from 90 to 110 and the pattern from 6 to 8 holes Ø9; PCD = (45 + flange Ø)/2 rounded to 1 mm
  1. PCD = (45 + 110)/2 = 77.5, rounded to 78 mm (was 68)
  2. Hole edge to hub: 39.0 − 4.5 − 22.5 = 12 mm
  3. Hole edge to rim: 55 − 39.0 − 4.5 = 11.5 mm
  4. Metal between neighbouring holes: 2 × 39 × sin(180°/8) − 9 = 20.85 mm
  5. The section view and the end view regenerate with 8 holes; nothing is redrawn by hand

Answer: PCD 78, 12 mm to the hub, 11.5 mm to the rim, 20.8 mm between holes

Placing a polar array · 8 holes on PCD 78, the first block inserted at 90° (top), array centre on the bore axis
  1. Step angle = 360°/8 = 45°
  2. Angles: 90, 135, 180, 225, 270, 315, 0, 45°
  3. Copy 2 at 135°: x = 39 cos 135° = −27.58, y = 39 sin 135° = 27.58 mm
  4. Copies at 90° and 270° lie in the vertical cutting plane, so the section shows them cut

Answer: 8 copies 45° apart; copy 2 at (−27.58, 27.58)

Keep going

Recommended reading

  • Machine Drawing, N. D. Bhatt and V. M. Panchal
  • Machine Drawing, K. R. Gopalakrishna
  • Machine Drawing, K. L. Narayana, P. Kannaiah and K. Venkata Reddy
  • Machine Drawing, N. Siddeshwar, P. Kannaiah and V. V. S. Sastry
  • Machine Drawing with AutoCAD, Goutam Pohit and Goutam Ghosh
  • SP 46:2003 Engineering Drawing Practice for Schools and Colleges, Bureau of Indian Standards
  • Geometric Dimensioning and Tolerancing for Mechanical Design, Gene R. Cogorno

How this book was made

Chapters follow the official syllabi listed above. Every interactive's formulas and every worked-example number were checked by script. Explanations, animations and examples are original to Skill-Lync.

From the exam to a core job

Talk to a counsellor.

Ask how design engineers and draughtsmen use machine drawing on real projects, and what the Geometric Dimensioning and Tolerancing covers.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.